Smoant Campbel 80W Kit $69.9 Product introduction
The Smoant Campbel, powered by single 18650 battery, supports a maximum adjustable output of 80W. The Campbel features long 3.0ml filter with a 2.0ml tank, which enables users to fill the soft drink and regular juice in two tubes. Parameters: Campbel Mod
Size: 55x 30x 77mm
Output Wattage: 1- 80W
Voltage: 3.2- 4.2V
Output modes: VW
Stable Charging: 5V/1A
Thread: 510 thread
Resistance Range: 0.08ohm-3ohm
Powered by single 18650 battery (Not included)
Filter
Size: 23.5x 111mm
Drip Tip Size: 16x 9mm
Capacity: 3.0ml
Material: Aluminum Alloy/ Resin/ Quartz Glass/ SS
Tank
Size: 19x 30.4mm
Capacity: 3.0ml
Coil: Ni80 0.2ohm (30- 60W)
Material: SS/ Quartz Glass/ 100% Japanese Organic Cotton
Features:
-Compact size for easy grip
-Multiple automatic protections
-Single 18650 cell with 80W max output
-Soft drink filter system for mixed flavor
-0.2ohm Ni80 coil for huge cloud production
-Top refill and adjustable bottom airflow design
Package includes:
1x Campbel 80W Mod
1x Campbel Tank
1x Micro USB Cable
2x Campbel coil Ni80
2x Replacement GlassTube
1x Certificated Card
1x Warranty Card
1x User Manual
1x Spare Parts Pack
1x Battery Warning Card
Smoant Naboo 225W TC Kit $60.9 Product introduction
The Smoant Naboo Kit, powered by dual 18650 batteries (Not included), supporting 225W max output with VW/TC mode, consists of the Smoant Naboo TC Mod and the Naboo Sub Ohm Tank. The Naboo adopts new music mode in addition to the classic mode and dial mode. So the scale will beat according to the volume of music while vaping.
Plus the updated Ant225 chip with wallpaper DIY function and independent locking button, the Smoant Naboo will bring you stable and colorful vaping experience.
As for the Smoant Naboo Sub Ohm Tank, it comes with 2.0ml/4.0ml e-juice capacity, mainly featuring the advanced mesh coils with different resistance. Plus the easy top refill design, the Smoant Naboo will bring you simple yet optimal vaping flavor. Parameters: Naboo Mod
Size: 48x 31x 91mm
Output Wattage: 1- 225W
Voltage: 6.0- 8.4V
Stable Charging: 1.5A
Conversion Rate: 95%
Material: Zinc alloy
Thread: 510 thread
Output modes: VW /TC(Ni,Ti,SS)/ TCR
Screen: 2.4 inch TFT colorful screen
Temperature Range: 200- 600℉/ 100- 300℃
Multiple Protections: Reverse protection/ Over-heating protection/ Low voltage protection
Overload/ Short-circuit protection/ Over-time protection
Naboo Atomizer
Size: 25x 52mm
Drip Tip Size: 16x 9mm
Capacity: 4.0ml/ 2.0ml
(with an Extra Glass Tube)
Coil: 0.18ohm Mesh Coil (40- 60W)
0.17ohm Mesh Coil (60- 100W)
Material: SS304+Quartz Glass+Resin Drip Tip
100% Japanese Organic Cotton
Features:
-World’s first 2.4 inch colorful screen with touch button
-2+1 UI options with newest music mode available
-Innovative mesh coils with for different vaping needs
-Updated Ant225 chipset with multiple automatic protections
-Easy top refill and adjustable airflow design
Aspire Cleito 120 Pro Sub Ohm Tank $27.75 Product introduction Aspire Cleito 120 Pro Tank, with 25mm diameter, comes with comes with a 0.15ohm pre-installed mesh coil, plus Aspire Cleito 120 coil rated at 0.16 ohms, both are compatible with the original Cleito 120 tank.
It also features the triple slot adjustable bottom airflow and easy top side-fill design for an optimal flavor and convenient operation. Plus the disassembled structure and a relatively low-profile design, it will be very easy to clean and maintain the Aspire Cleito Pro Tank. Parameters:
Size: 25x 52mm
Capacity: 3.0ml
4.2ml (with bubble glass tube)
Coil: 0.16ohm (100- 120W);
0.15ohm Mesh Coil (60- 75W)
Thread: 510
Features:
-Easy top side-fill slot design
-Adjustable bottom airflow with three air slots
-Innovative Cleito 120 Pro mesh coil for dense flavor
-Detachable structure for easy cleaning and maintenance
Package includes:
1x 3.0ml Cleito 120 Pro Tank
2x Coils (1x0.16Ω & 1x0.15Ω Mesh Coil)
1x 4.2ml Bubble Glass Tube
6x O-rings
1x User Manual
1x Warranty Card
24Pcs/Pack F.L.H.S Breathe Cotton $3.7 24Pcs/Pack F.L.H.S Breathe Cotton Parameters:
Australia Cotton
Made In Taiwan
24 Pre Cut Strips
100% Pure Cotton Features:
-Unbleached
-No Additives
-Easy to Set Up
-Vacuum Packaging
Package includes:
One Pack of F.L.H.S Breathe Cotton
Immortal Modz Reckoning RDA $35.5 Product introduction
The Immortal Modz Reckoning RDA is a 25mm diameter RDA with a vertical clamp system designed with both performance for the cloud chaser and offerings to the coils gods kept in mind.
With a spring loaded positive center post and opposing negative posts, it can handle whatever build you can come up with. From simple mesh to “heater inlaid mohawks”, the Reckoning from Immortal Modz can handle and propel your vaping and coil creation experience to the next level. Parameters:
25mm diameter
304 SS construction
Triple post build deck
Peek insulation
510 thread connection Features:
-11mm deep juice well
-Fully Adjustable AFC
-Includes Gold-Plated Squonk BF 510 Pin Package includes:
1x Immortal Modz Reckoning RDA
Spare Parts Pack
*1x Squonk BF 510 Pin
*1x Spare Negative Screw
*1x Spare Positive Screw
*1x Spare Clamp Bar
*1x Spare Clamp Block
*1x Spare Positive Post Spring
*4x Spare O-Ring
Hugsvape Snow Cotton & Coils $0.99 Product introduction Hugsvape Snow Cotton & Coils comes with 2Pcs cotton and 2Pcs pre-built coils in a package. It’s a pretty simple yet powerful package that meets your rebuild-able needs for RDA, RTA and RDTA. Very easy to build and wick. The organic cotton delivers pure taste out of your e-liquid. Package includes:
1x Hugsvape Snow Cotton & Coils
Hugsvape Surge Squonk Kit 80W $47.5 Product introduction Hugsvape Surge Squonk Kit comes with a Surge Squonk Box Mod and a Piper RDA. The Surge Squonk Mod, powered by single 18650/20700 battery, is able to reach up to a maximum output power of 80W. And the battery door is strongly held by magnets. As for the Piper RDA, it features both a 510 pin and a squonk pin. Its bottom airflow transfers to side airflow through the tube and then hits the coils directly from inside. Parameters: Surge Squonk Mod
Material: PC+ Glass Fiber
Size: 79x 54.4x 25.7mm
Wattage range: 7- 80W
TC range: 100- 315℃/ 200- 600℉
Standby currently ≤20uA
Maximum output voltage: 9V
6.0ml food grade silicon bottle Piper RDA
Size: 24x 27.8mm
With both 510 pin and BF pin Features:
-Support 4 working modes: Power, W-VPC, Bypass and TC
-Compatible with 18650/ 20700 Battery (Not included)
-Strong magnetic battery door
-Dual vertical coil system
-Squonk pin and 510 pin included
Package includes:
1x Surge Squonk Box Mod
1x Piper RDA
1x 18650 Battery Adapter
1x Accessory Bag
1x USB Cable
1x User Manual
2x Clapton Coils
2x Snow Cotton
Geek Vape Ammit MTL RTA Only $20.2 Product introduction Ammit MTL RTA, the first mouth to lung RTA from Geekvape, comes with two different diameters MTL drip tip for various preferences and 4.0ml capacity. Ammit RTA features three-dimensional airflow system transferring air from top to bottom producing unbeatable flavor while retaining leak-proof capability. And 12 airflow adjustment options provide the most variable restrictions for different preferences. Parameters:
Size: 24x 40mm
Capacity: 4.0ml
Drip tip diameter: 2mm/ 3mm
Threading: 510 Features:
-3D airflow transferring from top to bottom
-Leak-proof design with top to bottom airflow system
-Surround airflow design delivering from three different
-directions directly at the coils producing unbeatable flavor
-Professional MTL drip tip with two different diameters
-12 airflow adjustment options for the perfect restriction
-Innovative dual-layer chamber structure to provide outstanding heat dissipation effect Package includes:
1x Ammit MTL RTA
1x Spare Glass Tube
1x Drip Tip
2x 1.0ohm Coils
1x Allen Key
1x User Manual
1x Spare Parts Polybag
Vapefly Pixie BF RDA Product introduction Vapefly Pixie RDA, with 22mm diameter, constructed from Delrin and stainless steel material, is a super humanized designed single coil RDA featured with unique side coil deck & avoid heating design, which will deliver the best flavor & cloud under easy using. Parameters:
22mm diameter
24mm height
(W/O bottom screw)
Coil type: Single coil
Delrin drip tip
Body material: Delrin+ stainless Features:
-Avoid heat design
-Interchangeable airflow set
-Bottom Feed pin included
-Super easy building deck for single coil
-Side coil design to avoid e-juice lifting up Package includes:
1x Vapefly Pixie RDA
1x BF Squonk Pin
2x Hex Screws
1x Screw Driver
2x Vapefly Firebolt Cotton
2x 0.35ohm 26GA*2(KA1)+36GA(Ni80) Coils
1x User Manual
O-rings
Vapor Storm ECO HAWK Kit $25.8 Product introduction
The Vapor Storm ECO Hawk Kit, including an ECO Box Mod and a Hawk Tank, is designed with a stylish interface and compact size. Constructed from ABS plastic material, the kit is lightweight and convenient to carry around.
Powered by single 18650 battery (sold separately), the ECO Mod is able to reach up to a maximum output power of 90W.
As for the Hawk Tank, it is with 24mm diameter and features 2.0ml/ 6.0ml juice capacity. Parameters: 90W ECO Box Mod
Size: 40(L)x 25(W)x 82(H)mm
Material: ABS
Power: 90W (Max)
Thread: 510
Voltage Range: 3.3- 4.2v
Output Voltage: 0- 4.2v
Coil Resistance: >=0.09ohm
Continuous Vape Time: 10 seconds
Dormancy Current: <5μA
Recharge Current: 750mA
Hawk Tank
Material: 304 stainless steel
24mm diameter
44.5mm height
2.0ml/ 6.0ml juice capacity
510 thread type
Features:
-Simple and colorful design
-High-quality ABS material
-10s quickly continuous smoking
-Good taste and heavy smoke
-The Unique Internal Structure Design
Package includes:
1x ECO Box Mod
1x Hawk Tank (2ml)
1x Extra 0.2ohm Coil
1x Extra 6ml Glass
1x USB Charger
1x User Manual
Ystar Wolverine RDA 24mm $27.6 Product introduction
The Ystar Wolverine RDA, with 24mm diameter, is constructed of jade, stainless steel and PEI. The Wolverine RDA supports various build styles (single/ double and mesh coil) to satisfy different vaping needs. What’s more, the honeycomb style airflow makes the draw smoother and quieter with more flavor and featuring a deep juice well. Parameters:
Diameter: 24mm
Height: 33mm
Material: Stainless Steel, PEI, Jade
Features:
-Side airflow system
-Easy-to-build deck
-Made from Stainless Steel and PEI
Package includes:
1x YSTAR Wolverine RDA
2x Clapton Coils
1x Mesh Coil
1x 810 Jade Drip Tip
1x 510 Drip Tip Adapter
1x Spare Parts
Dovpo Topside Squonk Mod 90W Product introduction Dovpo Topside Mod collaboratively designed by the Vapor Chronicles and Dovpo, is constructed with food grade Stainless Steel, Zinc Alloy and Aluminum Alloy to make it moderately impact-resistant in an ergonomic shape and ensure safety and provide you healthy vaping experience.
Powered by single 18650/21700 battery, the Topside is able to reach up to maximum output power of 90W with switchable power, bypass, and temperature control modes. Besides, the mod is also equipped with a 10ml silicone e-juice bottle which supports the top filling. Parameters:
Size: 92x 54x 27mm
Wattage Range: 0- 90W
Screen Size: 0.96 inch
Material: Zinc Alloy, Aluminum Alloy, Stainless Steel
Input Voltage Range: 0.08- 3.5Ω
Working Mode: VW, Bypass, TC
Thread: Gold-plated Spring Loaded 510 Features:
-With unique appearance
-Powered by single 18650/21700 battery with 90W max output
-Supports vaping while charging Package includes:
1x Dovpo Topside Mod
1x Bottle (Pre-installed)
1x Extra Bottle Kit
1x 18650 Battery Adapter
1x USB Cable
1x User Manual
1x Card
HAVA Firefly 85W TC Starter Kit 2000mAh Product introduction HAVA Firefly Kit, including a Firefly Mod and a VTank Sub Ohm Tank, is named “Firefly” because that the included mod can switch between 7 colors in 2 lighting modes: Flash and Breath modes. Constructed of zinc alloy and polycarbonate, the mod is robust and solid, looks so cool.
The Firefly Mod also provides a bonus lighting mode called “Rhythm” when in standby. In the “Rhythm” mode, the lights dance to music based on surrounding music. Powered by 2000mAh built-in battery with the intelligent controller chip, the mod is able to reach up to a maximum output power of 85W with 6 safety features like high performance, long- lasting lifespan, and safe charging.
As for the included VTANK, it features 24mm diameter 5.0ml maximum juice capacity, top-filling, and dual slotted bottom airflow. Besides, the VTank utilizes two different coils, the new Kanthal Mesh Coil consists of the 0.15ohm coil head, a mesh coil head rated at 40- 90W, and the Single Parallel 0.5ohm coil head rated at 30- 50W. Parameters:
Size: 82.3x 52.4x 34mm
material: Zinc Alloy+ Stainless Steel
Powered by 2000mAh built-in battery
E-Juice Capacity: 3.0ml/ 5.0ml
Screen: 7 Color LED
Wattage Output Range: 5- 85W
Voltage Output Range: 3.3- 4.2V
Resistance Range (TC mode): 0.05- 1.0ohm
Resistance Range (VW mode): 0.1- 3.0ohm
Temperature Range: 200- 600℉/ 100- 315℃
Connection: 510 Features:
-Multiple Modes system
-Threaded Top-Fill System
-Captivating 7-Color LED Display
-Proprietary Protection system
-Integrated 2000mAh Rechargeable Battery
-Constructed by Durable Zinc Alloy and Stainless Steel Package includes:
1x Hava Firefly Mod
1x VTANK Tank
1x 0.5ohm Standard Coil
1x 0.15ohm Mesh Coil
1x HAVA Profile Card
1x Spare O-Rings
1x 3.0ml Standard Glass Tube
1x 5.0ml Bubble Glass Tube
1x Conformity Certificate
1x Warranty Card
1x Warning Card
1x USB Cable
Eleaf iJust ECM kit 300mAh Product introduction
The Eleaf iJust ECM Starter Kit, with 300mAh built-in battery, consists of the Eleaf iJust ECM Tube Mod and the iJust ECM Atomizer. The iJust ECM has the simple yet classic pen-style appearance with portable design. With the colorful LED Battery Level indicator light and multiple protections, the Eleaf iJust ECM will bring you a safe vaping environment.
And the iJust ECM Atomizer, it features 4.0ml e-juice capacity and the all-new EC-M AND EC-N mesh coil for optimal flavor and great taste. Besides, the atomizer has an easy top refill and adjustable bottom airflow control. Parameters: iJust ECM Mod
Diameter: 25mm
Height: 87.5mm
Resistance Range: 0.1- 3.0ohm
Battery: Built-in 3000mAh
Max output wattage: 40W
Input voltage: DC 5V
Thread: 510
LED Battery Level: Green (100%-30%), Blue (29%-10%), Red (≤9%) iJust ECM Atomizer
Diameter: 25mm
Height: 54mm
E-juice Capacity: 4.0ml
Coil Type: EC-M 0.15ohm Mesh Coil (30- 75W);
EC-N 0.15ohm Mesh Coil (30- 75W) Features:
-Built-in 3000mAh Battery
-All-new EC-M/ EC-N Mesh Coil Head
-Retractable top refill design
-Colorful LED Battery Indicator and Multiple Protections
Package includes:
1x iJust ECM Battery
1x 4.0ml iJust ECM Atomizer
1x EC-M 0.15ohm Head (Pre-installed)
1x EC-N 0.15ohm Head
1x Spare Glass Tube
1x QC USB Cable
2x User Manual
Spare Parts
Innokin Proton Plex 235W TC Kit $69.9 Product introduction Innokin Proton Plex Kit, including a Proton Mod and a Plex Tank, powered by dual 18650 batteries, is able to reach up to a maximum output power of 235W. Equipped with all-new Atheon chip set, the Innokin Proton Plex 235W TC Kit has stable performance. As for the Plex tank, it adopts Plexus triple-core coil, bringing better flavor, enhanced vapor production, and greater longevity. Parameters: Proton Mod
Size: 84x 44.6x 29.6mm
Output Wattage: 6- 235W
Output Voltage: 6.2- 9.0V
Maximum Output Current: 40A
Atomizer Resistance Range: 0.05- 3.5ohm
Display: 1.45 Inch Color Screen (TFT)
Thread: Spring-loaded 510 thread
Suitable tank: Most 510 thread atomizers
Powered by dual 18650 batteries (not included)
Temperature Range: 300- 600℉/ 150- 315℃
Mode: Wattage/ TC(SS316, Ni200, Ti)/ TCR/ Bypass/ Curve Mode Plex Tank
Size: 54x 28mm
Capacity: 4.0ml
Material: SS + Pyrex glass
Thread: 510
Coil: Plexus 0.13ohm Coil;
Plexus Scion 0.15ohm Coil Features:
-1.45 inch TFT full color display
-New Atheon 235W chip set
-Joystick menu controller
-Large lateral fire panel
-Triple-core Plexus coil
-Side-n-fill design with bottom airflow
Package includes:
1x Innokin Proton Mod
1x Plex Tank (0.13ohm coil)
1x Plexus Scion Coil (0.15ohm)
1x Micro USB Cable
1x Spare Glass
1x Spare O-ring Set
1x Vape Band
1x User Packet
Vapor Storm 200W TC Box Mod $32.5 Product introduction Vapor Storm TC Mod, powered by dual 18650 external batteries, is able to reach up to a maximum output of 200W. Its CCW mode an Curve mode allow users to set 10 equispaced power setting point in 5 seconds to vape. What’s more, the mod supports several types of coil: Kanthal, Ni200, Ti and SS316. Parameters:
Size: 57x 26x 84.5mm (Lx Wx H)
Wattage: 5- 200W
Thread: 510 connection
Voltage range: 6.4- 8.4V
Resistance: 0.06- 5ohm
Temp range: 100- 315℃/ 200- 600℉
Coil support: Kanthal, Ni200, Ti, SS316
Powered by dual 18650 batteries (Not included)
CCW Mode, Curve Mode, vapers can set 10 equispaced power setting point in 5 seconds to vape. Features:
-Over Puffing Protection
-Short Circuit Protection
-Low Voltage Protection
-Charging Protection
-Over Charging Protection Package includes:
1x Vapor Storm 200W Mod
1x USB Cable
1x User Manual
1x Warranty Card
