3FVape.com – New Mechanical Mods, TC Mods, RTA, RDA & Atomizers Update!

[Gina1]

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13630-authentic-sigelei-213w-tc-temperature-control-vw-variable-wattage-box-mod-black-black-leather-10213w-2-x-18650.html]Original Sigelei 213W TC Temperature Control VW Box Mod [/URL][/U][/B] $77.99
The Sigelei 213 TC Mod features a device that is comfortable to hold due to the lightweight and smooth carbon fiber and aluminum construction. The Sigelei 213 TC Mod requires (2) high amp 18650 batteries (not included) which is easily replaced using the sliding battery door cover located at the bottom of the device. The Sigelei 213 features a brand new Sigelei chip which allows you to fire at an incredible maximum wattage of 213 watts. Available colors are: Golden + Red , Black + Black .

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13637-hadaly-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-316-stainless-steel-22mm-diameter.html]Hadaly RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $9.99
The Hadaly Clone RDA is an innovative RDA for you flavor chasers out there. This RDA is amazing but if you looking for massive clouds this one is not for you. It is best suited for single coil builds. This RDA is constructed from 316 stainless steel with Bottom Feeder Center Pin.

[B][U][URL=http://www.3fvape.com/clearomizer/13636-authentic-ijoy-maxo-v12-sub-ohm-tank-atomizer-standard-kit-black-stainless-steel-glass-56ml-01-ohm-28mm-diameter.html]Original IJOY MAXO V12 Sub Ohm Tank Atomizer Standard Kit[/URL][/U][/B] $25.99
IJOY MAXO V12 standard kit presents as the performance frontrunner in the new and most powerful version sub tank from IJOY. With 5.6ml juice capacity, 28mm diameter and has an intelligent top flip fill system. It features V12 twelvefold Coil atomizer head configuration and power range at 0.1 ohm’s 60~315W to make cloud vapor chasing and pure taste. The V12 is a true Cloud Killer, fantastic choice for high powered devices. Available colors: Silver, Black.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13631-authentic-sigelei-vexus-cda-rda-rebuildable-dripping-atomizer-silver-stainless-steel-235mm-diameter.html]Original Sigelei Vexus CDA RDA Rebuildable Dripping Atomizer[/URL][/U][/B] $23.99
The Vexus Sigelei CDA is ushering in a new era of vaping, Sigelei has yet again come up with something that may raise the bar forever. 23.5mm Diameter, Deep Juice Well, Made for ease of use. Available colors are: Silver, Black.

[Gina1]

[B][U][URL=http://www.3fvape.com/mechanical-mod/13680-tvl-style-mechanical-mod-brass-brass-1-x-18650.html]TVL Mechanical Mod Clone[/URL][/U][/B] $12.99
The TVL Clone mechanical mod is constructed from brass and powered by 1 x 18650 battery. 510 threading connection;
Brass construction; 24mm diameter top deck; Bottom fire button. Available colors are: Brass,Copper

[B][U][URL=http://www.3fvape.com/mod-kit/13672-authentic-smoktech-smok-stick-v8-2000mah-battery-mod-tfv8-baby-tank-starter-kit-black-3ml-015-ohm-22mm-diameter.html]Original SMOKTech SMOK Stick V8 2000mAh Battery Mod + TFV8 Baby Tank Starter Kit[/URL][/U][/B] $29.99
Stick V8 Baby kit consists of 2000mAh Stick V8 2000 battery and TFV8 Baby tank. Simple mechanical pen style matches with baby beast-TFV8 Baby tank, the newest pen kit brings you experience the purest taste. Innovation keeps changing the vaping experience. various of color for you to choose!

[B][U][URL=http://www.3fvape.com/mod-kit/13671-murdered-out-able-style-mechanical-mod-w-saw-blade-hybrid-top-hat-battle-style-rda-kit-black-brass-1-x-18650-24mm.html]Murdered Out Able Mechanical Mod w/ Saw Blade Hybrid Top Hat Clone + Battle RDA Clone Kit[/URL][/U][/B] $24.99
The Able Clone Mechanical Mod is powered by interchangeable 1 x 18650 battery (not included).The Diameter of this mechanical mod is 24mm.The AV Battle Clone RDA is constructed with brass and stainless steel. It is with dual posts design for single or dual coil configuration. There are two air holes on the sleeve for adjustable airflow control. The mod is with Murdered Out sleeve and Saw Blade Hybrid Top Hat.

[Gina1]

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13703-mason-dumptank-style-rta-30mm-rebuildable-tank-atomizer-silver-stainless-steel-glass-10ml-30mm-capacity.html]Mason Dumptank RTA 30mm Rebuildable Tank Atomizer Clone[/URL][/U][/B] $20.99
The 30mm Mason Dumptank Clone RTA is built with both flavor and production in mind, the Dumptank clone RTA offers a continually variable air flow control for completely closed off to a wide open draw. The Channeled juice holes allow the builder to position the wick without fear of the bell cap dislodging them.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13702-kryten-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-316-stainless-steel-24mm-diameter.html]Kryten RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $13.99
Kryten Clone RDA is constructed from 316 stainless steel and in 24mm diameter. The Kryten Clone RDA is in 24mm diameter, is the updated version of its predecessor the Hadaly RDA. The Kryten Clone RDA is with unique dual post coil clamping system for dual coil build.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13698-authentic-528-custom-goon-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]Original 528 Custom GOON RDA Rebuildable Dripping Atomizer[/URL][/U][/B] $35.99
The GOON RDA by the makers of the very popular Monster RTA makes building easy for new and experienced users. This RDA features an innovative bridge styled build deck where almost any sized build can fit with ease. The large 24mm diameter allows for huge builds and a deep juice well preventing leaks. The positive and negative posts are gold plated and features PEEK insulators for great conductivity and insulation. 4 colors for you to choose!

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13681-kabuki-style-rda-rebuildable-dripping-atomizer-black-stainless-steel-24mm-diameter.html]Kabuki RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $9.99
The Kabuki Clone RDA is made from stainless steel and in 24mm. The RDA is in dual-pole design and replacement wide bore drip cap. The replacement resin drip tip will be shipped in random color (one piece will be shipped).

[B][U][URL=http://www.3fvape.com/mod-kit/13685-apocalypse-gen-2-style-mechanical-mod-rda-rebuildable-dripping-atomizer-kit-silver-aluminum-1-x-18650-24mm-diameter.html]Apocalypse GEN 2 Mechanical Mod Clone + RDA Rebuildable Dripping Atomizer Kit[/URL][/U][/B] $17.99
This mod kit consists of mechanical mod and Apocalypse Gen 2 Clone RDA. The Apocalypse Gen 2 Clone RDA is with clamp design and has a massive 13mm space in each clamp which provides space for mounting the most complex & insane coil builds. Coupled with the 4mm deep juice well, 21mm build deck, durable post clamps and extended post screws, the Apocalypse is a builders dream. The mod is made from aluminum and the RDA is with aluminum top cap, and stainless deck. The RDA is compatible with 12.5mm drip tip, the same as Goon RDA and Kennedy 24 / 25 RDA. 4 colors for you choose!

[DrChud]

@Gina1 are the goon rda’s on your site clones.
http://www.3fvape.com/home/13698-authentic-528-custom-goon-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html#.WKtkWtKLTIU

[Norseman]

Yeah @Gina1 @DrChud is not the only one wondering about this. The question is if 3fvape have stooped to a level where they say authentic about clones now… And if this is priced up clones marked as authentic, what is then every other authentic 3fvape got in stock? Are they also overpriced clones?

[Volition]

Yes I too want to know if the goons are authentic,

Good Deals 2017!

The info comes directly from 528customs saying that they don’t do business with 3fvape and that it has to be clones. 528customs also say they are investigating further into this. The link posted in my last post is supposed to take you to instagram but it doesn’t work as it should and i got no clue why that is. [image]

Have you gotten them through a middle man or something. The answer to this question could be very important as your reputation is at stake I believe.

[Gina1]

[B][U][URL=http://www.3fvape.com/mechanical-mod/13714-kindbright-avid-lyfe-revolver-timekeeper-time-keeper-style-mechanical-mod-silver-stainless-steel-1-x-18650.html]Kindbright Avid Lyfe Revolver Timekeeper Mechanical Mod Clone[/URL][/U][/B] $20.99
The Kindbright AV Revolver Timekeeper Clone stainless steel mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper Clone Mod is precision machined with state-of-the-art CNC machines, mad out of stainless steel. Each Timekeeper Mechanical Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality. Each Timekeeper Competition Clone mechanical Mod goes through a rigorous inspection before leaving our facility.

[B][U][URL=http://www.3fvape.com/mechanical-mod/13706-avid-lyfe-revolver-timekeeper-time-keeper-style-mechanical-mod-silver-stainless-steel-1-x-18650.html]Avid Lyfe Revolver Timekeeper Time Keeper Mechanical Mod Clone[/URL][/U][/B] $17.99
The AV Revolver Timekeeper Clone stainless steel mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper Clone Mod is precision machined with state-of-the-art CNC machines, mad out of stainless steel. Each Timekeeper Mechanical Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality. Each Timekeeper Competition Clone mechanical Mod goes through a rigorous inspection before leaving our facility.

[B][U][URL=http://www.3fvape.com/mechanical-mod/13705-broadside-style-mechanical-mod-black-copper-1-x-18650.html]Broadside Mechanical Mod Clone[/URL][/U][/B] $22.99
The Broadside Clone Mechanical Mod is constructed from copper and powered by 1 x 18650 battery. Mechanical button is with 3 points of contact, no springs or magnets needed to help to reduce hot buttons and misfires.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13713-authentic-wotofo-serpent-rdta-rebuildable-dripping-tank-atomizer-black-stainless-steel-glass-40ml-22mm-diameter.html]Original Wotofo Serpent RDTA Rebuildable Dripping Tank Atomizer [/URL][/U][/B] $23.99
The Original Wotofo Serpent RDTA has a number of assets which should convince amateurs of vape and flavor. The Serpent RDTA has a construction plate in Bottom-Coil (at the top of the atomizer) which favorites in mono-coil. A plate with clamps for thick wires. With a gigantic aeration under the coil and especially a Pyrex tank for good autonomy in e-liquid. The top cap is doubled in Ultem to isolate the heat. As always with Wotofo, the Serpent RDTA is delivered with a complete package, ready to vape.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13712-phenomenon-zest-v2-style-rta-rebuildable-tank-atomizer-silver-stainless-steel-22mm-diameter.html]Phenomenon ZEST V2 RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $14.99
The Phenomenon ZEST V2 Clone RTA is made from stainless steel and in 22mm diameter. The RTA is side airflow system and dual-pole building deck.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13710-authentic-digiflavor-df200-200w-tc-vw-variable-wattage-box-mod-black-zinc-alloy-5200w-200600-f-100300-c-3-x-18650.html]Original Digiflavor DF200 200W TC VW Box Mod[/URL][/U][/B] $39.99
The Original Digiflavor DF 200 TC mod features small size, good hand feeling, creative structure and 510 spring-loaded connector. It also has large screen. Magnet battery door, easy to swap battery. With multiple protections and delicate design, it will be more attractive and fashionable.

[B][U][URL=http://www.3fvape.com/mod-kit/13709-av-avid-lyfe-m1p5-style-mechanical-mod-captain-cap-ii-style-rda-atomizer-kit-black-brass-1-x-18650.html]AV Avid Lyfe M1P5 Mechanical Mod Clone + Captain Cap II RDA Atomizer Clone Kit[/URL][/U][/B] $23.99
AV Avid Lyfe M1P5 Clone Mechanical Mod is made from brass. The mechanical mod is powered by 1 x 18650 battery and with magnet fire button. This RDA is combined with Avid Lyfe Wide Bore Captain Cap II Clone top cap and dual-pole stainless steel deck. The Captain II Clone Cap is a precision machined top cap that is the perfect addition to your setup. The Captain Cap II features brass construction, 24mm diameter, dual chamfered air holes, and fits on the Battle deck, Torpedo deck, Tugboat Deck, and Mutation V2 and V3 decks. The battle deck is made from stainless steel and in dual -pole design with 20mm diameter.

[B][U][URL=http://www.3fvape.com/mod-kit/13708-av-avid-lyfe-m1p5-style-mechanical-mod-av-torpedo-combo-style-rda-atomizer-kit-black-brass-1-x-18650.html]AV Avid Lyfe M1P5 Mechanical Mod Clone + AV Torpedo Combo RDA Atomizer Clone Kit [/URL][/U][/B] $23.99
AV Avid Lyfe M1P5 Clone Mechanical Mod is made from brass. The mechanical mod is powered by 1 x 18650 battery and with magnet fire button. The AV Torpedo Combo Clone RDA is constructed from brass and stainless steel. This RDA is with fixed drip tip. It is with dual posts design for single or dual coil configuration. There are two air holes on the sleeve for adjustable airflow control.

[B][U][URL=http://www.3fvape.com/mod-kit/13707-av-avid-lyfe-m1p5-style-mechanical-mod-mini-comp-lyfe-battle-style-rda-kit-black-brass-1-x-18650.html]AV Avid Lyfe M1P5 Mechanical Mod Clone + Mini Comp Lyfe Battle RDA Clone Kit[/URL][/U][/B] $23.99
AV Avid Lyfe M1P5 Clone Mechanical Mod is made from brass. The mechanical mod is powered by 1 x 18650 battery and with magnet fire button. The Mini Comp Lyfe Battle Clone RDA is constructed from brass with beautiful looks. The Mini Comp Lyfe Battle Clone RDA comes with triple-post deck design. Features 24mm diameter, large build deck, this Mini Comp Lyfe Battle Clone RDA is a good choice for cloud chasing enthusiasts!

[B][U][URL=http://www.3fvape.com/mod-kit/13704-timekeeper-v2-style-mod-w-saw-blade-hybrid-top-hat-captain-cap-ii-style-rda-kit-black-brass-stainless-steel-1-x-18650.html]Timekeeper V2 Mod w/ Saw Blade Hybrid Top Hat Clone + Captain Cap II RDA Clone Kit[/URL][/U][/B] $22.99
The Timekeeper V2 Clone mechanical mod with Saw Blade Hybrid Top Hat is made from Brass. The adjustable brass bottom-fire button with opposing earth magnet will be very easy for you to use. Hope this mod will bring you good vaping experience. This RDA is combined with Avid Lyfe Wide Bore Captain Cap II Clone aluminum top cap and dual-pole stainless steel deck. The Captain II Clone Cap is a precision machined top cap that is the perfect addition to your setup. The Captain Cap II aluminum construction, 24mm diameter, dual chamfered air holes, and fits on the Battle deck, Torpedo deck, Tugboat Deck, and Mutation V2 and V3 decks. The battle deck is made from stainless steel and in dual -pole design with 20mm diameter.

[Volition]

Hi @Gina1 can you confirm or deny your "authentic goon 24 RDA " are in fact Authentic. See Posts above. As 528customs claim they don’t do business with you.

If you fail to respond would it be safe to say they are not genuine. Which is not a good look, I wait to hear your clarification.

[Gina1]

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13738-authentic-eleaf-istick-qc-200w-5000mah-tc-vw-variable-wattage-box-mod-wood-grain-1200w-100315-c-200600-f.html]Eleaf iStick QC 200W 5000mAh TC VW Box Mod[/URL][/U][/B] $37.99
The iStick QC 200W comes with a massive 5000mAh built-in battery and has a powerful 50A/200W maximum output. Stylish, sustainable and powerful, the iStick QC 200W also features a cell balancing trickle charge system and a 1.5A quick charge capability when using the Avatar Quick Charger. The innovative RC adapter (optional accessory) will convert the iStick QC 200Ws 510 connection into a USB output for Power bank mode when necessary. Different colors for you to choose!

[B][U][URL=http://www.3fvape.com/mechanical-mod/13719-the-double-cross-style-mechanical-mod-red-brass-1-x-18650.html]The Double Cross Mechanical Mod Clone[/URL][/U][/B] $18.99
The Double Cross Clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.

[B][U][URL=http://www.3fvape.com/mechanical-mod/13715-sxk-av-avid-lyfe-revolver-timekeeper-time-keeper-style-mechanical-mod-silver-stainless-steel-1-x-18650.html]SXK AV Avid Lyfe Revolver Timekeeper Time Keeper Mechanical Mod Clone[/URL][/U][/B] $17.90
The SXK AV Revolver Timekeeper Clone stainless steel mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper Clone Mod is precision machined with state-of-the-art CNC machines, mad out of stainless steel. Each Timekeeper Mechanical Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality. Each Timekeeper Competition style mechanical Mod goes through a rigorous inspection before leaving our facility.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13729-lost-art-goon-style-rta-rebuildable-tank-atomizer-silver-aluminum-glass-35ml-24mm-diameter.html]Lost Art Goon RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $9.99
The Lost Art Goon Clone RTA adopts the innovative bridge clamp design unrivaled by any other design in the industry as the Goon RDA. There are 6 air hole in the chamber and comes with the baffle as the GeekVape Avocado RDTA for single coil build. 5 colors for you to choose!

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13723-kryten-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-stainless-steel-24mm-diameter.html]Kryten RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $8.99
Kryten Clone RDA is constructed from stainless steel and in 24mm diameter. The Kryten Clone RDA is in 24mm diameter, is the updated version of its predecessor the Hadaly RDA. The Kryten Clone RDA is with unique dual post coil clamping system for dual coil build. 3 colors for you to choose!

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13720-elite-gen-v2-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-285mm-diameter.html]Elite GEN V2 RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $9.99
The Elite GEN V2 Clone RDA is made from stainless steel and in 28.5mm diameter. The RDA is 25.5mm building deck and 5mm deep juice well. The RDA is in dual-pole design and airflow control via the sleeve.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13713-authentic-wotofo-serpent-rdta-rebuildable-dripping-tank-atomizer-black-stainless-steel-glass-25ml-22mm-diameter.html]Original Wotofo Serpent RDTA Rebuildable Dripping Tank Atomizer [/URL][/U][/B] $23.99
The Original Wotofo Serpent RDTA has a number of assets which should convince amateurs of vape and flavor. The Serpent RDTA has a construction plate in Bottom-Coil (at the top of the atomizer) which favorites in mono-coil. A plate with clamps for thick wires. With a gigantic aeration under the coil and especially a Pyrex tank for good autonomy in e-liquid. The top cap is doubled in Ultem to isolate the heat. As always with Wotofo, the Serpent RDTA is delivered with a complete package, ready to vape.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13712-phenomenon-zest-v2-style-rta-rebuildable-tank-atomizer-silver-stainless-steel-22mm-diameter.html]Phenomenon ZEST V2 RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $14.99
The Phenomenon ZEST V2 Clone RTA is made from stainless steel and in 22mm diameter. The RTA is side airflow system and dual-pole building deck.

[B][U][URL=http://www.3fvape.com/mod-kit/13744-authentic-eleaf-istick-qc-200w-5000mah-tc-vw-variable-wattage-mod-with-melo-300-tank-kit-wood-grain-1200w-35ml-017-ohm.html]Original Eleaf iStick QC 200W 5000mAh TC VW Mod with MELO 300 Tank Kit[/URL][/U][/B] $55.99
The iStick QC 200W comes with a massive 5000mAh built-in battery and has a powerful 50A/200W maximum output. Stylish, sustainable and powerful, the iStick QC 200W also features a 1.5A quick charge capability when using the Avatar Quick Charger. The innovative RC adapter (optional accessory) will convert the iStick QC 200Ws 510 connection into a USB output for Power bank mode when necessary. Various of color for you to choose!

[B][U][URL=http://www.3fvape.com/mod-kit/13717-the-double-cross-style-mechanical-mod-battle-style-dual-pole-rda-atomizer-kit-red-brass-stainless-steel-1-x-18650.html]The Double Cross Clone Mechanical Mod + Battle Clone Dual-Pole RDA Atomizer Kit [/URL][/U][/B] $22.99
The Double Cross Clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod. The Complyfe Battle Clone RDA is constructed from stainless steel dual-post deck, brass top cap and stainless steel drip tip.

[B][U][URL=http://www.3fvape.com/misc/13732-v2-510-heat-dissipation-heat-sink-for-atomizers-silver-stainless-steel-22mm-diameter.html]V2 510 Heat Dissipation Heat Sink for Atomizers [/URL][/U][/B] $1.69
The V2 510 heat dissipation heat sink is used for dissipating atomizers. It is made from stainless steel. Available colors are:Silver, Black.

[Gina1]

Thank you for your message! We are sorry for the confusion. But we promise the Authentic 528 Custom GOON RDA Rebuildable Dripping Atomizer is AUTHENTIC. 3Fvape never ever sells clone products as authentic. We would like to explain as following:

1. The item is from authorized distributor of GOON. We have launched sales promotion for this item, and that’s why the price is so low on our site. Sorry that we are unable to enclose distributor information due to non-disclosure agreements.

2. We made a video to show you the difference between authentic and clone ones. From the video you can see clearly about the difference. You may check the video with the following link: https://youtu.be/B5NATtUzQJ4

3. We are under pressure, since we offer Authentic Goon RDA at such a low price. So we have to finish the sales promotion earlier, and the price of the Authentic 528 Custom GOON RDA has gone back to $59.95/$69.95/$64.95/ $64.95 USD.
   In a word, 3FVAPE always aims to offer top service to our customer, and won many trust of old customer, i appreciate you to trust us and thanks for understanding!

[Volition]

Thanks @Gina1 I’ll take you at your word.

[Gina1]

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13746-authentic-ciggo-t71-71w-tc-vw-variable-wattage-box-mod-grey-silver-171w-1-x-18650-100315-c-200600-f.html]Original CigGo T71 71W TC VW Box Mod [/URL][/U][/B] $23.99
The Original CigGo T71 71W VW mode supports variable wattage from 1W to 71W and temperature control from 100’C to 315’C. The T71 is with OLED screen to show Volt, Wattage, Resistance, Puff, Time and supports Power, Bypass, Temp Ni, Temp TI, Temp SS modes. 4 colors for you to choose!

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13749-authentic-aleadertech-orbit-80w-tc-vw-variable-wattage-box-mod-random-color-580w-resin-1-x-18650.html]Aleadertech Orbit 80W TC VW Box Mod [/URL][/U][/B] $56.99
Original Aleadertech Orbit 80W TC VW Box Mod is made from resin and aluminum. The mod is with 510 spring-loaded center pin. There are side and bottom vents for battery dissipation.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13759-mask-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]Mask RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $8.99
The Mask Clone RDA is made from stainless steel and in 24mm diameter. The RDA is bridge clamp design and bottom airflow control. Please Note: The yellow PEI drip will replace the black POM drip tip in the picture

[B][U][URL=http://www.3fvape.com/mod-kit/13750-av-revolver-timekeeper-time-keeper-style-mechanical-mod-battle-style-rda-silver-stainless-steel-1-x-18650.html]AV Revolver Timekeeper Time Keeper Mechanical Mod Clone + Battle RDA Clone[/URL][/U][/B] $25.99
The AV Revolver Timekeeper Clone stainless steel mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper Clone Mod is precision machined with state-of-the-art CNC machines, mad out of stainless steel. Each Timekeeper Mechanical Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality. Each Timekeeper Competition Clone mechanical Mod goes through a rigorous inspection before leaving our facility.
The Complyfe Battle Clone RDA is constructed from stainless steel. The Complyfe Battle Clone RDA comes with dual-post deck design. Features 24mm diameter, large build deck.

[B][U][URL=http://www.3fvape.com/mod-kit/13751-av-revolver-timekeeper-time-keeper-style-mechanical-mod-goon-lp-style-rda-silver-stainless-steel-1-x-18650.html]AV Revolver Timekeeper Time Keeper Mechanical Mod Clone + Goon LP RDA Clone[/URL][/U][/B] $24.99
The AV Revolver Timekeeper Clone stainless steel mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper Clone Mod is precision machined with state-of-the-art CNC machines, mad out of stainless steel. Each Timekeeper Mechanical Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality.
The Goon RDA LP Clone RDA is constructed from stainless steel and with wide bore drip tip. This RDA has a lower profile than its forerunner (duh) and uses airflow slots instead of airflow holes.

[B][U][URL=http://www.3fvape.com/mod-kit/13752-av-revolver-timekeeper-time-keeper-style-mechanical-mod-rda-atomizer-kit-silver-stainless-steel-1-x-18650.html]AV Revolver Timekeeper Time Keeper Mechanical Mod Clone + RDA Atomizer Kit[/URL][/U][/B] $26.99
The AV Revolver Timekeeper Clone stainless steel mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper style Mod is precision machined with state-of-the-art CNC machines, mad out of stainless steel. Each Timekeeper Mechanical Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality.

[B][U][URL=http://www.3fvape.com/mod-kit/13753-av-revolver-timekeeper-time-keeper-style-mechanical-mod-goon-style-rda-silver-stainless-steel-1-x-18650.html]AV Revolver Timekeeper Time Keeper Mechanical Mod Clone + Goon RDA Clone[/URL][/U][/B] $25.99
The AV Revolver Timekeeper Clone stainless steel mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper Clone Mod is precision machined with state-of-the-art CNC machines, mad out of stainless steel. Each Timekeeper Mechanical Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality. Each Timekeeper Competition Clone mechanical Mod goes through a rigorous inspection before leaving our facility.
The Goon Clone RDA is a 24mm RDA that uses an innovative bridge clamp design unrivaled by any other design in the industry. Installing massive and intricate builds or the simplest coils have never been easier with the bridge clamp design of the Goon. This Goon style RDA features a quad-pole and with the adjustable air holes, it supports dual and single coil build. The Goon RDA comes with 1/2 wide bore drip tip.

[B][U][URL=http://www.3fvape.com/mod-kit/13754-leaf-pattern-able-style-mechanical-mod-battle-style-rda-kit-black-yellow-brass-1-x-18650-24mm.html]Leaf Pattern Able Mechanical Mod Clone + Battle RDA Clone Kit[/URL][/U][/B] $24.99
The Able Clone Mechanical Mod is powered by interchangeable 1 x 18650 battery (not included).The Diameter of this mechanical mod is 24mm.The AV Battle Clone RDA is constructed with brass and stainless steel. It is with dual posts design for single or dual coil configuration. There are two air holes on the sleeve for adjustable airflow control.

[Gina1]

[B][U][URL=http://www.3fvape.com/mechanical-mod/13780-authentic-hellvape-trishul-mechanical-mod-brass-brass-1-x-18650.html]Original Hellvape TRISHUL Mechanical Mod[/URL][/U][/B] $24.99
Original Hellvape TRISHUL Mechanical Mod is made up from brass has the Sharp silver pin for hardest hit. It also has dual spring option to match your style.

[B][U][URL=http://www.3fvape.com/mechanical-mod/13779-authentic-vapjoy-fufda-mechanical-mod-random-color-copper-resin-1-x-18650.html]Original Vapjoy FUFDA Mechanical Mod [/URL][/U][/B] $30.99
This Original FUFDA Mechanical Mod is made from copper and resin sleeve. There are air holes on the mod for better heat dissipation. The mod is powered by 1 x 18650 battery (not included). Please note: The resin sleeve will be shipped in random color (one piece will be shipped).

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13768-authentic-sigelei-laisimo-v80-80w-tc-temperature-control-box-mod-grey-50-800w.html]Original Sigelei Laisimo V80 80W TC Temperature control Box Mod[/URL][/U][/B] $54.99
Original Sigelei Laisimo V80 has 1.3 inch colorful screen, which displays all the main information, including output wattage, output voltage, atomizer resistance, real-time temperature and remaining battery life.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13782-lost-art-goon-style-rta-rebuildable-tank-atomizer-silver-stainless-steel-glass-35ml-24mm-diameter.html]Lost Art Goon RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $11.99
The Lost Art Goon Clone RTA adopts the innovative bridge clamp design unrivaled by any other design in the industry as the Goon RDA. There are 6 air hole in the chamber and comes with the baffle as the GeekVape Avocado RDTA for single coil build. 4 colors for you to choose!

[B][U][URL=http://www.3fvape.com/mod-kit/13778-authentic-joyetech-ego-one-aio-1500mah-battery-starter-kit-camouflage-2ml-06-ohm.html]Original Joyetech eGo ONE AIO 1500mAh Battery Starter Kit[/URL][/U][/B] $20.99
Joyetech eGo AIO, being all-in-one style, attaches the best anti-leaking structure with 2ml e-juice capacity. It applies childproof systems: pressure twist cap of tank and five-click fire button of power supply. It is simple and convenient in use, but fashionable in look of several mixed colors and indicator light of seven colors. Its simplicity and efficiency make the device quite popular and unique. There are different pattern for you to choose!

[B][U][URL=http://www.3fvape.com/mod-kit/13766-frankenskull-style-mechanical-mod-bottom-feeder-rda-kit-white-1-x-18650-pc-stainless-steel.html]FrankenSkull Mechanical Mod Clone + Bottom Feeder RDA Kit[/URL][/U][/B] $18.99
The FrankenSkull Clone mechanical mod is constructed from PC and with built-in tank to support bottom feed. The 3FVape squonker RDA is with Velocity Clone dual-pole design and bottom airflow.

[B][U][URL=http://www.3fvape.com/misc/13786-authentic-vapethink-smiling-face-silicone-anti-slip-ring-vape-band-yellow-black-smiling-face-pattern-22mm-diameter-10pcs.html]Original Vapethink Smiling Face Silicone Anti-slip Ring Vape Band[/URL][/U][/B] $2.99
The Original Vapethink Anti-slip Ring Vape Band is made from high quality silicone and with Smiling Face pattern printed. The vape band is in 22m diameter, 12mm height and 2mm thickness.

[B][U][URL=http://www.3fvape.com/misc/13789-hand-fidget-spinner-focus-toy-edc-golden-aluminum-ceramic-bearings.html]Hand Fidget Spinner Focus Toy EDC [/URL][/U][/B] $19.99
The Hand Fidget Spinner Focus Toy EDC is made of high quality CNC milled aluminum, very comfortable. Handmade with skilled craftsmanship ensure a quality product. Compact and light weight, perfect small size for EDC pocket carry. This is a perfect fidget toy to keep your hands busy or to just play with. It feels nice in the hands and it is silent so you won’t be bothering anybody.

[B][U][URL=http://www.3fvape.com/drip-tip/13788-replacement-drip-tip-for-kennedy-24-25-goon-goon-lp-battle-reload-rda-random-color-resin-stainless-steel-128mm.html]Replacement Drip Tip for Kennedy 24 / 25 / Goon / Goon LP / Battle / Reload RDA(Resin + Stainless Steel)[/URL][/U][/B] $2.99
This is a wide bore drip tip made from resin. This wide bore drip tip features 12.8mm length, 16mm outer diameter. It is suitable for Kennedy 24 / 25 / Wide Bore Goon / Goon LP / Battle / Reload / Mad Dog / Mask / CSMNT Cosmonaut RDA / Apocalypse GEN 2 RDA. The acrylic drip will be shipped in random color (one piece).

[B][U][URL=http://www.3fvape.com/drip-tip/13787-replacement-drip-tip-for-kennedy-24-25-goon-goon-lp-battle-reload-rda-random-color-resin-128mm.html]Replacement Drip Tip for Kennedy 24 / 25 / Goon / Goon LP / Battle / Reload RDA(Resin)[/URL][/U][/B] $2.59
Material: Resin; Connector outer diameter: 12.4mm; Outer diameter: 16.7mm; Length: 14.3mm; Suitable for Kennedy 24 and the Goon RDA.

[B][U][URL=http://www.3fvape.com/wick-wire-mesh/13785-authentic-engstone-vape-v20-organic-fiber-cotton-wick-white-05-meter.html]Original Engstone Vape V2.0 Organic Fiber Cotton Wick[/URL][/U][/B] $4.99
Original Engstone Vape V2.0 Organic Fiber Cotton Wick contains no pesticides. This cotton can be easily molded and twisted to wick.

[Gina1]

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13798-pti-v2-style-rda-rebuildable-dripping-atomizer-w-conversion-cap-black-stainless-steel-aluminum-24mm-diameter.html]PTI V2 RDA Rebuildable Dripping Atomizer Clone w/ Conversion Cap[/URL][/U][/B] $8.99
The PRI V2 Clone RDA is with new 24mm Conversion cap. This Cap will increase the already fantastic flavor from the RDA. The new cap is with air slits instead of air holes in the old cap.

[B][U][URL=http://www.3fvape.com/mod-kit/13804-authentic-suorin-air-400mah-battery-all-in-one-starter-kit-silver-2ml.html]Original Suorin Air 400mAh Battery All-in-one Starter Kit[/URL][/U][/B] $23.99
The Original Suorin Air is a game changing all-in-one device that is redefining the term stealth vaping. the Suorin Air features a 400mAh rechargeable battery and 2ml refillable pod which provides incredible battery life and liquid capacity for a device of such diminutive dimensions. Incorporated into the design is a master on / off switch and subdued battery life indicator light which is activated when the device is firing and charging. An extremely efficient design, there are no buttons, screens, or complicated settings; the device is instantly activated through inhalation.

[B][U][URL=http://www.3fvape.com/drip-tip/13797-authentic-vapesoon-replacement-drip-tip-for-smok-tfv8-tfv8-big-baby-tfv12-tank-random-color-silicone-5-pcs.html]Original Vapesoon Replacement Drip Tip for SMOK TFV8 / TFV8 Big Baby / TFV12 Tank[/URL][/U][/B] $2.99
The Original Vapesoon Replacement silicone Drip Tip is suitable for SMOK TFV8 / TFV8 Big Baby / TFV12 Tank. There comes 5 PCS per pack and random color will be shipped.

[B][U][URL=http://www.3fvape.com/misc/13796-authentic-smoktech-smok-glass-tank-for-tfv8-big-baby-tank-g320-kit-g-priv-kit-transparent-3-pcs.html]Original SMOKTech SMOK Glass Tank for TFV8 Big Baby Tank / G320 Kit / G-Priv Kit [/URL][/U][/B] $4.99
The Original SMOKTech replacement Glass Tank is suitable for TFV8 Big Baby Tank / G320 Kit / G-Priv Kit. 3 PCS per pack.

[B][U][URL=http://www.3fvape.com/misc/13795-self-adhesive-skin-sticker-wrap-cover-for-smoktech-smok-alien-mod-black.html]Self-adhesive Skin Sticker Wrap Cover for SMOKTech SMOK Alien Mod[/URL][/U][/B] $1.99
The Self-adhesive Skin Sticker Wrap Cover is suitable for SMOK Alien Box Mod. It is easy to install and no bubble. With precision Cut, Access to Switches, Buttons, and Knobs. The sticker will protect your Mod from Scratch, Fade, Peel, Dirt and Water. Easily removable without leaving a sticky residue. High definition printing, the color is bright and do not fade.

[B][U][URL=http://www.3fvape.com/vape-tools/13794-authentic-coil-master-521-mini-tab-resistance-tester-coil-rebuilding-deck-black-0199-ohm-1-x-18650.html]Original Coil Master 521 Mini Tab Resistance Tester Coil Rebuilding Deck[/URL][/U][/B] $14.99
Original Coil Master 521 Mini Tab Black Resistance Tester is powered by a single 18650 battery (not included), Coil Master 521 mini Tab is a handy compact device for vapers. It allows users to use it as a build deck and is able to dry fire their coils down to 0.1 ohm as well. Reverse battery protection and short circuit protection are also built in for safety use.

[B][U][URL=http://www.3fvape.com/wick-wire-mesh/13793-authentic-coil-master-pro-cotton-organic-wick-white-3-pcs-pack.html]Original Coil Master Pro Cotton Organic Wick [/URL][/U][/B] $2.99
Original Coil Master Pro Cotton White Organic Wick is 100% natural cotton material, a fine texture of absorbent cotton after the purified process.

[B][U][URL=http://www.3fvape.com/vape-tools/13792-authentic-coil-master-seb-stainless-steel-e-juice-bottle-silver-20ml.html]Original Coil Master SEB Stainless Steel E-juice Bottle[/URL][/U][/B] $19.99
Coil Master SEB (SS E-juice Bottle) is an amazing e-liquid container that releases a controlled amount of liquid with a simple press of a button. With a needle nose tip on the injection end, the SEB makes it easy to fill Clearomizer, cartomizers, or atomizers with no leak, not even a drip. The metal flask is accented by the Coil Master logo, laser etched onto the side. It can also be attached as a key chain.

[B][U][URL=http://www.3fvape.com/vape-tools/13791-authentic-coil-master-coiling-kit-v4-6-in-1-coil-jig-black-red-15-2-25-3-35-4mm-poles.html]Original Coil Master Coiling Kit V4 6-in-1 Coil Jig[/URL][/U][/B] $12.99
The Coil Master Coiling Jig V4 is with the double-sized top caps and the larger size, simply slip in any gauge wire, spin the cap away to your desired resistance and voila. And the Coiling Jig V4 Just Make Coil Building Much More Easier.

[B][U][URL=http://www.3fvape.com/vape-tools/13790-authentic-coil-master-multifunctional-vape-tweezers-black.html]Original Coil Master Multifunctional Vape Tweezers[/URL][/U][/B] $4.99
Coil Master Vape tweezers are revolutionary and multifunctional tools for vapers. The tweezer is a perfect tool with ceramic heat-consistence tweezers on the one end and a wrench on the other, which allows you to unthread stuck bottom ends with ease. Constructed from high-performance polycarbonate and ceramic.

[Gina1]

[B][U][URL=http://www.3fvape.com/mechanical-mod/13816-av-avid-lyfe-revolver-timekeeper-time-keeper-style-mechanical-mod-brass-brass-1-x-18650.html]AV Avid Lyfe Revolver Timekeeper Time Keeper Mechanical Mod Clone[/URL][/U][/B] $18.99
The AV Revolver Timekeeper Clone brass mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper Clone Mod is precision machined with state-of-the-art CNC machines, made out of brass. Each Timekeeper Mechanical Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13815-authentic-cks-icon-200w-tc-vw-variable-wattage-box-mod-black-5200w-100300-c-212572-f-2-x-18650.html]Original CKS ICON 200W TC VW Box Mod[/URL][/U][/B] $77.79
The Icon 200 box will be a dual 18650 battery variable voltage mod. It features V.O Technology’s innovative 200w chip which will have a lot of nice new features from the chip used in the 80w Dagger mod. The bottom half of the device will allow the user to slide it’s door to expose the battery compartment. Stay tuned because we might even offer some interchangeable options.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13807-authentic-yosta-livepor-160w-tc-vw-variable-wattage-box-mod-black-1160w-100300-c-200600-f-2-x-18650.html]Original YOSTA Livepor 160W TC VW Box Mod[/URL][/U][/B] $32.99
Yosta Livepor 160w box mod features very beautiful appearance and compact design. The leather design makes hand feeling more comfortable. The mod is powered by dual 18650 batteries (not included) and can fire up to 160W max power. And with its temperature control system, Liver 160W box mod can be switched with VW / MECH / TC-Ni / TC-Ti / TC-SS / TCR Mode. And Livepor mod comes with PTC function, it will bring wonderful vaping enjoyment. The OLED screen can display the parameters of device. You will enjoy great vaping experience.

[B][U][URL=http://www.3fvape.com/clearomizer/13813-authentic-cigpet-eco12-sub-ohm-tank-clearomizer-silver-stainless-steel-glass-56ml-28mm-diameter.html]Original CIGPET ECO12 Sub Ohm Tank Clearomizer[/URL][/U][/B] $27.99
The Original IJOY CIGPET ECO12 is the most capable Sub-Ohm Tank for premiere cloud chaser. Rich ECO COIL family to choose from, the maximum can be 400W. In addition the Rebuildable deck, the ECO12 tank has unlimited possibilities.

[B][U][URL=http://www.3fvape.com/mod-kit/13809-authentic-ijoy-solo-elf-80w-tc-variable-wattage-mod-starter-kit-black-2ml-07-ohm-1-x-18650.html]Original IJOY SOLO ELF 80W TC Mod Starter Kit[/URL][/U][/B] $42.99
IJOY SOLO ELF KIT is one of the best starter kit for beginners. The ELF TANK is a new, curvy, compact and elegant design platform, a latest mouth to lung 2ml tank, features in coil and chimney 2 in 1, reduces the airflow travel. The unique coil design makes IJOY ELF a true flavor MTL tank, combined with a single 18650 box mod, brings you the best carry-on device which provides a better flavor experience.

[Gina1]

[B][U][URL=http://www.3fvape.com/mechanical-mod/13818-ronin-style-mechanical-mod-silver-stainless-steel-1-x-18650.html]Ronin Mechanical Mod Clone[/URL][/U][/B] $13.99
The Ronin Clone Mechanical Mod is constructed from Stainless Steel and powered by 1 x 18650 battery (not included). There are air holes on the battery tube for better heat dissipation. The mod is with magnets fire button. 3 colors for you to choose!

[B][U][URL=http://www.3fvape.com/mechanical-mod/13829-kindbright-av-avid-lyfe-revolver-timekeeper-time-keeper-style-mechanical-mod-black-brass-1-x-18650.html]Kindbright AV Avid Lyfe Revolver Timekeeper Time Keeper Mechanical Mod Clone[/URL][/U][/B] $21.99
The Kindbright AV Revolver Timekeeper Clone copper mechanical Mod is a hard hitting, competition mechanical 18650 mod. The Timekeeper Clone Mod is precision machined with state-of-the-art CNC machines, made out of copper.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13822-authentic-asmodus-minikin-2-180w-10-touch-screen-tc-vw-variable-wattage-mod-raw-5180w-212572-f-2-x-18650.html]Original asMODus Minikin 2 180W 1.0 Touch Screen TC VW Mod[/URL][/U][/B] $87.99
The Minikin is back the all new Minikin 2! The Minikin 2 is powered by a GX-180-HT chip which incorporates the same battery power saving capabilities as its predecessors but features a new wattage cap of 180 watts and touch screen support!
The Minikin 2 utilizes newly updated firmware which displays the following information on its LED screen: Individual battery charge, resistance of the atomizers, volts being used to fire at desired wattage, a puff counter, the duration of the fire, and which mode you are in. The Minikin 2 features a redesigned body that was designed to be exceptionally comfortable to hold.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13821-authentic-lost-vape-triade-triple-dna-tc-vw-box-mod-elephant-black-zinc-alloy-genuine-leather-1250w-3-x-18650.html]Original Lost Vape Triade Triple DNA TC VW Box Mod [/URL][/U][/B] $129.99
The Triade DNA 250 by Lost Vape is an updated version of the Triade DNA 200. Compared to its predecessor, the Triade DNA 250 features a 50 watt power increase to 250W, faster USB charging at 2 amps, a 55A current output limit, on-board reverse voltage protection, a higher current fuse and an easier stainless steel temperature control system.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13825-vape-breed-atty-v3-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]Vape Breed Atty V3 RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $9.99
The Vape Breed Atty V3 Clone 24mm RDA has a bigger deck for monster builds compared with the previous ones. Cloud chasers and Flavor chasers alike would enjoy this, featuring side air holes for optimal and maximum airflow thru the coils resulting in satisfying clouds of flavor and vapor. Available colors are: Silver, Golden, Black.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13824-mad-dog-style-rda-rebuildable-dripping-atomizer-copper-copper-24mm-diameter.html]Mad Dog RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $8.99
The Mad Dog Clone will provide you with massive vapor cloud every time. It comes with double convex 2-post build decks, which is designed for Clapton and fused coils. You can also use it with ordinary coils. And adjustable bottom side airflow will provide enough air during the vaping. And condensates won’t be inhaled to your mouthpiece with the PEI drip tip.
The outer diameter of drip tip connector is 12.5mm, so it is compatible with the drip tip the same as Kennedy 24 / 25 RDA , 1/2 Goon RDA, Battle RDA and SMOK TFV8 tank. Available colors are: Copper.Brass.

[Gina1]

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13837-authentic-lost-vape-esquare-dna60-60w-tc-vw-variable-wattage-mod-silver-new-zealand-abalone-zinc-alloy-160w-2-x-18650.html]Original Lost Vape ESquare DNA60 60W TC VW Mod[/URL][/U][/B] $105.99
The Lost Vape ESquare DNA60 TC Box Mod marks the return of the beautiful craftsmanship from the ESquare series, presenting one of the first Evolv’s DNA 60 platform with a maximum wattage of 60W. The Lost Vape ESquare DNA60 TC Box Mod is powered by a dual 18650 battery (not included) for one of the best balance between performance functionality, size, and designs. Internally, The Lost Vape ESquare DNA60 TC Box Mod is one of the first to feature Evolv’s latest vaulted technology of the DNA 60 chipset, implementing a range of 1 to 60W with 85% output efficiency rating. Different styles you may like!

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13839-authentic-hcigar-vt75-nano-75w-tc-vw-variable-wattage-mod-black-aluminum-zinc-alloy-175w-1-x-18650.html]Original HCigar VT75 Nano 75W TC VW Mod[/URL][/U][/B] $66.99
The HCigar VT75 Nano is the smaller and more compact version of the original HCigar VT75. The HCigar VT75 Nano removes the original VT75’s ability to use 26650 sized batteries to allow for a smaller body size. The HCigar VT75 Nano can utilize the EScribe software (For Windows) to fully customize your device and settings. The HCigar VT75 Nano is powered by one High Amp 18650 battery (not included) and the newly redesigned battery cover allows for easy battery replacements. There are various of color for you choose!

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13830-authentic-hugo-vape-buster-250-dna250-vw-variable-wattage-box-mod-silver-zinc-alloy-stainless-steel-1250w-3-x-18650.html]Original Hugo Vape BUSTER 250 DNA250 VW Box Mod [/URL][/U][/B] $129.99
The Original Hugo Vape BUSTER 250 DNA250 Box Mod offers up to 250 watts of power which needs to be more than acceptable for the average user and the life of the battery was pretty good when using the device at low Wattages. The Original Hugo Vape BUSTER DNA250 Box Mod is operated by 3 x 18650 batteries (not included). At the top of the Hugo Vape BUSTER DNA250 Box Mod, there is a 510 threaded and spring-loaded connection for easy installs of your standard RDA.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13847-shado-mgnt-rda-v2-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]Shado MGNT RDA V2 RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $9.59
The Shado MGNT RDA V2 Clone RDA is constructed from stainless steel and in 24mm diameter. The RDA is with an innovative single post design which saves space to utilize the majority of the deck for building. It has a massive juice well and the post holes are huge allowing for literally any type of wire build. The side airflow is airy so it can chuck some decent clouds but the flavor.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13846-pti-v2-style-rda-rebuildable-dripping-atomizer-w-conversion-cap-black-stainless-steel-aluminum-24mm-diameter.html]PTI V2 RDA Rebuildable Dripping Atomizer Clone w/ Conversion Cap[/URL][/U][/B] $8.99
The PTI V2 Clone RDA is with new 24mm Conversion cap. This Cap will increase the already fantastic flavor from the RDA. The new cap is with air slits instead of air holes in the old cap.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13845-sxk-kryten-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-316-stainless-steel-24mm-diameter.html]SXK Kryten RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $14.90
Kryten Clone RDA is constructed from 316 stainless steel and in 24mm diameter. The Kryten Clone RDA is in 24mm diameter, is the updated version of its predecessor the Hadaly RDA. The Kryten Clone RDA is with unique dual post coil clamping system for dual coil build.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13843-authentic-vgod-pro-drip-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]Original VGOD Pro Drip RDA Rebuildable Dripping Atomizer [/URL][/U][/B] $43.99
The Original VGOD Pro Drip RDA features 24mm diameter with a dual vertical post design with 2-holes per post for an easy and well-designed post set-up. The VGOD Pro Drip RDA features a durable stainless steel construction as well as unmatched precision when designing the RDA to ensure a flush and un-compromised fit. Featuring dual bottom airflow with direct coil flow ensures a flavorful and vaporful experience every time. A low profile e-juice well is implemented to ensure no over-dripping will leave your RDA.

[Gina1]

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13863-authentic-tesla-nano-120w-tc-vw-variable-wattage-apv-box-mod-copper-zinc-alloy-7120w-2-x-18650.html]Original Tesla Nano 120W TC VW APV Box Mod[/URL][/U][/B] $46.99
The Original Tesla Nano 120W TC Box Mod is constructed from zinc alloy and supports wattage variable from 7W to 120W in 0.5W increments. The mod is with 0.91 large screen to show resistance, voltage, taste, resistance lock sign, output mode, output wattage, battery level, memory mode.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13861-authentic-yosta-livepor-60-60w-1500mah-vtc-variable-wattage-box-mod-black-zinc-alloy-160w-100300-c.html]Original YOSTA Livepor 60 60W 1500mAh VTC Box Mod[/URL][/U][/B] $27.99
YOSTA Livepor 60 VTC mini box mod is an intelligent electronic cigarette device, which developed and produced with advanced technique by the YOSTATECH, this product has a quite small size and large capacity battery. It can support Ceramic, Kanthal, Stainless Steel, Nickel and Titanium coils, IGVI T2 atomizer with Ceramic coil, low-cost, clean, long service life, make huge vapor cloud, good taste and pure flavor, give you a new wonderful vaping experience.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13860-authentic-arms-race-limitless-200w-tc-vv-variable-voltage-box-mod-blue-camouflage-5200w-2-x-18650.html]Original Arms Race Limitless 200W TC VV Box Mod[/URL][/U][/B] $69.99
The Original Arms Race Limitless Mod is a powerful, rugged, and innovative device. Full of new features, this box mod is equipped with a custom and unique chipset for optimum performance. The Original Arms Race Limitless Mod has a rugged design that is sturdy, yet affordable. The Original Arms Race Limitless Mod fits most 25mm atomizers, with a built in side airflow access port.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13855-vitamin-style-rdta-rebuildable-dripping-tank-atomizer-silver-stainless-steel-2ml-24mm.html]Vitamin RDTA Rebuildable Dripping Tank Atomizer Clone[/URL][/U][/B] $11.99
The Vitamin Clone RDTA Rebuildable Dripping Tank Atomizer utilizes a postless deck design and is suited for dual coils or quad coils. The Vitamins postless deck section and genesis Clone wicking system is great for vapers that enjoy using custom coils. The Vitamin Clone RDTA Rebuildable Dripping Tank Atomizer offers great building potential! 3 color for you to choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13853-authentic-fumytech-crystal-ball-rebuildable-dripping-tank-rdta-black-stainless-steel-40ml-24mm-diameter.html]Original Fumytech Crystal Ball Rebuildable Dripping Tank RDTA[/URL][/U][/B] $29.99
Original Fumytech Dragon Ball Tank 2 in 1 RDTA is released by Fumytech. It has very beautiful design with great features. It has two ways to fill E-liquid. Open the drip tip, atomizer can be Dripping RDA. Open the whole top cap, atomizer, can be RTA Tank.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13852-authentic-geekvape-peerless-rda-rebuildable-dripping-atomizer-black-stainless-steel-24mm-diameter.html]Original GeekVape Peerless RDA Rebuildable Dripping Atomizer[/URL][/U][/B] $20.99
Original GeekVape Peerless RDA features an original build deck design that is made to fit large builds with an added post hole to support smaller coils. It also comes with a squonk pin for Squonk MOD. Just as the name says, the Geekvape Peerless RDA make you be envied and proud.

[B][U][URL=http://www.3fvape.com/misc/13869-self-adhesive-skin-sticker-wrap-cover-for-smoktech-smok-alien-mod-multicolored-pvc-type-04.html]Self-adhesive Skin Sticker Wrap Cover for SMOKTech SMOK Alien Mod [/URL][/U][/B] $1.99
The Self-adhesive Skin Sticker Wrap Cover is suitable for SMOK Alien Box Mod. It is easy to install and no bubble. With precision Cut, Access to Switches, Buttons, and Knobs. The sticker will protect your Mod from Scratch, Fade, Peel, Dirt and Water. Easily removable without leaving a sticky residue. High definition printing, the color is bright and do not fade. Sticker only, the mod in the picture is not included. Multicolored for you choose!

[B][U][URL=http://www.3fvape.com/misc/13865-authentic-wotofo-serpent-rdta-replacement-pyrex-glass-tube-tank-chamber-transparent.html]Original Wotofo Serpent RDTA Replacement Pyrex Glass Tube Tank Chamber[/URL][/U][/B] $2.99
The Original Wotofo Pyrex Glass tank is suitable for Serpent RDTA atomizer.

[B][U][URL=http://www.3fvape.com/misc/13864-authentic-wotofo-the-troll-rta-replacement-pyrex-glass-tube-tank-chamber-transparent.html]Original Wotofo The Troll RTA Replacement Pyrex Glass Tube Tank Chamber[/URL][/U][/B] $2.99
The Original Wotofo Pyrex Glass tank is suitable for The Troll RTA atomizer.

[Gina1]

[B][U][URL=http://www.3fvape.com/mechanical-mod/13908-vgod-pro-drip-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]VGOD Pro Drip RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $6.99
The VGOD Pro Clone RDA features 24mm diameter with a dual vertical post design with 2-holes per post for an easy and well-designed post set-up. The VGOD Pro Drip Clone RDA features a durable stainless steel construction as well as unmatched precision when designing the RDA to ensure a flush and un-compromised fit. Featuring dual bottom airflow with direct coil flow ensures a flavorful and vaporful experience every time. A low profile e-juice well is implemented to ensure no over-dripping will leave your RDA. 3 colors for you choose!

[B][U][URL=http://www.3fvape.com/mechanical-mod/13906-authentic-athena-poseidon-iii-rda-rebuildable-dripping-atomizer-silver-304-stainless-steel-22mm-diameter.html]Original Athena Poseidon III RDA Rebuildable Dripping Atomizer[/URL][/U][/B] $17.99
The Original Athena Poseidon III RDA is constructed from 304 Stainless Steel with large airflow slot. This RDA has 510 delrin drip tip and reverse adjustable 510 pin. Available colors are：Black, White.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/13914-authentic-wismec-predator-228-228w-tc-vw-variable-wattage-box-mod-silver-1228w-2-x-18650-100315-c-200600-f.html]Original Wismec Predator 228 228W TC VW Box Mod[/URL][/U][/B] $38.99
The Original Wismec Predator 228, designed by sinuous designs in USA, is powered by dual replaceable 18650 cells whose max. output reaches 228W / 50A. The application of plated USB ports contact makes it possible to realize 2A quick charge. And the separate battery power can be detected accurately through the upgradable firmware. Moreover, with the help of RC (reverse charging) adapter, Predator 228 can serve as a power bank to charge other electronic devices.

[B][U][URL=http://www.3fvape.com/mechanical-mod/13911-sebone-style-mechanical-mod-brass-brass-1-x-18650.html]Sebone Mechanical Mod Clone[/URL][/U][/B] $14.99
The Sebone Clone Mechanical Mod is constructed from brass and powered by 1 x 18650 battery (not included). There are air holes on the body for better heat dissipation. The fire button is using magnet.

[B][U][URL=http://www.3fvape.com/mod-kit/13919-authentic-wismec-predator-228-228w-tc-vw-variable-wattage-mod-elabo-tank-kit-silver-1228w-2-x-18650-100315-c-200600-f.html]Original Wismec Predator 228 228W TC VW Mod + Elabo Tank Kit[/URL][/U][/B] $50.99
Predator 228, designed by sinuous designs in USA, is powered by dual replaceable 18650 cells whose max output reaches 228W/50A. The application of plated USB ports contact makes it possible to realize 2A quick charge. And the separate battery power can be detected accurately through the upgradable firmware. Moreover, with the help of RC (reverse charging) adapter, Predator 228 can serve as a power bank to charge other electronic devices. The Elabo with retractable top filling solution and innovative childproof lock system can perfectly fit the Predator 228.

[B][U][URL=http://www.3fvape.com/mod-kit/13912-sebone-style-mechanical-mod-rda-kit-brass-brass-1-x-18650.html]Sebone Mechanical Mod Clone + RDA Kit[/URL][/U][/B] $22.99
The Sebone Clone Mechanical Mod is constructed from brass and powered by 1 x 18650 battery (not included). There are air holes on the body for better heat dissipation. The fire button is using magnet.

[B][U][URL=http://www.3fvape.com/misc/13923-hand-fidget-spinner-focus-toy-edc-antique-brass-brass.html]Hand Fidget Spinner Focus Toy EDC [/URL][/U][/B] $24.99
he Hand Fidget Spinner Focus Toy EDC is made of high quality CNC milled brass, very comfortable. Handmade with skilled craftsmanship ensure a quality product. Compact and light weight, perfect small size for EDC pocket carry. This is a perfect fidget toy to keep your hands busy or to just play with. It feels nice in the hands and it is silent so you won’t be bothering anybody.

[B][U][URL=http://www.3fvape.com/coil/13905-authentic-ijoy-tornado-150-replacement-ss316l-coil-heads-03-ohm-80150w-5-pcs.html]Original IJOY Tornado 150 Replacement SS316L Coil Heads[/URL][/U][/B] $8.79
The Original IJOY Tornado 150 Replacement SS316L Coil Head is made specifically for the IJOY Tornado 150 Tank. The Coil Heads are designed with 0.3 ohm resistance for bigger cloud production, long lifespan, and low juice consumption. There are also available 0.25Ohm. 5pcs in one package.

[B][U][URL=http://www.3fvape.com/misc/13903-starss-two-spins-hand-spinner-fidget-toy-nickel-plated-null-copper-plating-nickel.html]Starss Two Spins Hand Spinner Fidget Toy Nickel Plated[/URL][/U][/B] $19.99
The Starss Two Spins Hand Spinner Fidget Toy is a high-precision, hand spinning device made from various metals using an automated computer numerical control (CNC) milling process. The hand spinner provides the user with a calming effect and focus. Designed by USA, made in China. Many different style for you to select!

[B][U][URL=http://www.3fvape.com/misc/13898-starss-tri-bar-hand-spinner-fidget-toy-blue.html]Starss Tri Bar Hand Spinner Fidget Toy[/URL][/U][/B] $18.99
The Starss Tri Bar Hand Spinner Fidget Toy is a high-precision, hand spinning device made from various metals using an automated computer numerical control (CNC) milling process. The hand spinner provides the user with a calming effect and focus. Designed by USA, made in China .

[B][U][URL=http://www.3fvape.com/misc/13895-v2-edc-triangle-hand-spinner-fidget-toy-silver.html]V2 EDC Triangle Hand Spinner Fidget Toy[/URL][/U][/B] $14.99
V2 EDC Triangle Hand Spinner Fidget Toy is great for fidgety hands which may help people to quit smoking and decrease stress. It is easy to carry, small in size, simple to play and also effective for attracting attention.

[B][U][URL=http://www.3fvape.com/misc/13890-aspero-edc-hand-fidget-tri-spinner-focus-toy-black-abs-ceramic-bearings.html]Aspero EDC Hand Fidget Tri-Spinner Focus Toy[/URL][/U][/B] $6.99
The Aspero EDC Hand Fidget Tri-Spinner Focus Toy is made of ABS and is very comfortable. It has perfect balanced weights, smooth surface and high quality matte finish. The Aspero EDC Hand Fidget Tri-Spinner Focus Toy is a perfect fidget toy to keep your hands busy or to just play with. Available colors are: Black, White, Yellow, Green.

[Gina1]

[B][U][URL=http://www.3fvape.com/mechanical-mod/13991-broadside-style-mechanical-mod-rainbow-brass-1-x-18650.html]Broadside Mechanical Mod Clone[/URL][/U][/B] $19.99
The Broadside Clone Mechanical Mod is constructed from brass and powered by 1 x 18650 battery. Mechanical button is with 3 points of contact, no springs or magnets needed to help to reduce hot buttons and misfires.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13990-sxk-kayfun-mini-v3-style-rta-rebuildable-tank-atomizer-silver-316-stainless-steel-glass-2ml-19mm-diameter.html]SXK Kayfun Mini V3 RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $14.99
This SXK Kayfun Mini V3 Clone RTA Rebuildable Tank Atomizer is constructed from 316 Stainless Steel and Pyrex Glass. This RTA is 19mm diameter and holds 2mL capacity. This RDA is adjustable airflow control with AFC ring on the bottom.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13988-authentic-coolvapor-lava-rta-rebuildable-tank-atomizer-silver-stainless-steel-glass-3ml-24mm-diameter.html]Original Coolvapor Lava RTA Rebuildable Tank Atomizer[/URL][/U][/B] $27.90
Original Coolvapor Lava RTA is constructed from stainless steel and Pyrex glass. The RTA is in 24mm diameter and holds 3ml capacity. The Lava RTA is with top filling system and bottom airflow control. The RTA is with gold plated Velocity style dual-pole. There are quad juice holes in the chamber. 2 colors for you to choose, you can enjoy promotion price by adding this item to shopping cart.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/13987-kryten-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-pei-top-tap-golden-stainless-steel-24mm-diameter.html]Kryten RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin / PEI Top Tap[/URL][/U][/B] $8.99
Kryten Clone RDA is constructed from stainless steel and in 24mm diameter. The Kryten Clone RDA is in 24mm diameter, is the updated version of its predecessor the Hadaly RDA. The Kryten Clone RDA is with unique dual post coil clamping system for dual coil build.
Comes with dual drip tips and one PEI top cap.

[B][U][URL=http://www.3fvape.com/misc/13986-self-adhesive-skin-sticker-wrap-cover-for-wismec-reuleaux-rx2-3-mod-multicolored-pvc-type-24.html]Self-adhesive Skin Sticker Wrap Cover for Wismec Reuleaux RX2/3 Mod[/URL][/U][/B] $2.59
The Self-adhesive Skin Sticker Wrap Cover is suitable for Wismec Reuleaux RX2/3 Mod. It is easy to install and no bubble. With precision Cut, Access to Switches, Buttons, and Knobs. The sticker will protect your Mod from Scratch, Fade, Peel, Dirt and Water. Easily removable without leaving a sticky residue. High definition printing, the color is bright and do not fade. Sticker only, the mod in the picture is not included, multicolor and different patterns for you to choose!