3FVape.com – New Mechanical Mods, TC Mods, RTA, RDA & Atomizers Update!

Vendors
432

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12559-authentic-lost-vape-triade-triple-dna250-tc-vw-variable-wattage-box-mod-pearl-coffee-zinc-alloy-1250w-3-x-18650.html]Original Lost Vape Triade Triple DNA250 TC VW Box Mod[/URL][/U][/B] $129.99
The Triade DNA 250 by Lost Vape is an updated version of the Triade DNA 200. Compared to its predecessor, the Triade DNA 250 features a 50 watt power increase to 250W, faster USB charging at 2 amps, a 55A current output limit, on-board reverse voltage protection, a higher current fuse and an easier stainless steel temperature control system.

[B][U][URL=http://www.3fvape.com/mechanical-mod/12555-dimitri-style-mechanical-box-mod-golden-aluminum-alloy-2-x-18650.html#.WCkQ7fRIQSc]Dimitri Mechanical Box Mod Clone[/URL][/U][/B] $14.99
Magnet back cover, no need to use screwdriver, more convenient to use. there are 2 air holes on the bottom to prevent the battery from over heat, safe to use.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12539-pe-24-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24-diameter.html]PE-24 RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $9.59
The PE-24 Clone RDA is constructed from stainless steel and including a PRG-24 Clone 24mm Cap and Purge Style 22mm Deck. The PRG-24 Clone cap is modeled after the Cylinder of any six shooter, this cap offers nonadjustable cyclops airflow. The Purge Clone Deck is with 2.5mm negative post holes for all popular gauges of wire. 3 colors for you to choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12542-sxk-hadaly-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-stainless-steel-22mm-diameter.html]SXK Hadaly RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $14.90
The SXK Hadaly Clone RDA is an innovative RDA for you flavor chasers out there. This RDA is amazing but if you looking for massive clouds this one is not for you. It is best suited for single coil builds. This RDA is with Bottom Feeder Center Pin. CCS Providing Great Connection for Both Wattage and TC Modes; Deep Juice Well with Plenty of Room for Wicking; Designed for all styles of Vaping; Black Delrin Drip Tip Included.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12556-goon-lp-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]Goon LP RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $12.59
The Goon RDA LP Clone RDA is constructed from stainless steel and with wide bore drip tip. This RDA has a lower profile than its forerunner (duh) and uses airflow slots instead of airflow holes. Avaliable colors are: Sliver, Golden, Black.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12552-authentic-lost-vape-therion-bf-squonker-dna75-75w-tc-vw-mod-delirium-rda-kit-black-175w-200600-f-1-x-18650.html]Original Lost Vape Therion BF Squonker DNA75 75W TC VW Mod + Delirium RDA Kit[/URL][/U][/B] $109.99
The Lost Vape Therion BF Squonker is a single 18650 battery squonker with a hidden juice bottle tucked underneath the leather battery cover! Featuring the new DNA75 chip by Evolv. This 75 watt mod will keep up with your vaping Clone. The Therion Squonker BF is the ultimate low profile squonking machine. The Therion has been redesigned to allow a squonk bottle to rest inside, and utilizes a single 18650 cell (battery not included).

[B][U][URL=http://www.3fvape.com/drip-tip/12554-sjmy-510-drip-tip-for-doggystyle-2k16-style-rta-atomizer-yellow-pei-14mm.html]SJMY 510 Drip Tip for Doggystyle 2K16 RTA Atomizer Clone[/URL][/U][/B] $2.59
The SJMY PEI 510 Drip Tip will fits the Doggystyle 2K16 Style RTA perfectly. Because the unique design of the Doggystyle 2K16 RTA, the drip tip connector is shorter and smaller than universal 510 connector. The 510 drip tip with silicone O-ring will fit the Doggystyle 2K16 well, but some may be longer.

433

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12576-authentic-asmodus-minikin-2-180w-10-touch-screen-tc-vw-variable-wattage-mod-black-5180w-212572-f-2-x-18650.html#]Original asMODus Minikin 2 180W 1.0 Touch Screen TC VW Mod[/URL][/U][/B] $88.99
The Minikin 2 is powered by a GX-180-HT chip which incorporates the same battery power saving capabilities as its predecessors but features a new wattage cap of 180 watts and touch screen support! The Minikin 2 utilizes newly updated firmware which displays the following information on its LED screen: Individual battery charge, resistance of the atomizers, volts being used to fire at desired wattage, a puff counter, the duration of the fire, and which mode you are in. The Minikin 2 features a redesigned body that was designed to be exceptionally comfortable to hold. The asMODus logo has been re-positioned to the back of the device and the USB port has been moved the front of the device as the battery door has been remodeled to add magnetic closure. 15 vent holes have been added to the base of the device which allows for maximized heat dissipation.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12571-authentic-artery-nugget-pro-80w-3300mah-tc-vw-variable-wattage-box-mod-white-zinc-alloy-580w-100300-f-200600-f.html]Original Artery Nugget Pro 80W 3300mAh TC VW Box Mod[/URL][/U][/B] $30.99
The Original Artery Nugget Pro 80W TC VW Box Mod is built-in 3300mAh polymer lithium battery with durable battery life. The mod supports maximum power output up to 80W and with adjustable brightness of LED screen. The Mod supports 5 vaping mode: TM / VM / PM / TCR / CM.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12569-authentic-artery-ginger-tc-vw-variable-wattage-box-mod-black.html]Original Artery Ginger TC VW Box Mod[/URL][/U][/B] $50.99
This Original Artery Ginger Black TC VW Variable Wattage Box Mod has 510 threading connection; Simple and practical design; Tiny size, comfortable hand feeling; Solidly made, excellent quality; Supports USB charging.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12567-authentic-artery-mix-150-150w-tc-vw-variable-wattage-box-mod-silver-zinc-alloy-5150w-100300-c-200600-f-2-x-18650.html]Original Artery Mix 150 150W TC VW Box Mod[/URL][/U][/B] $50.99
The Original Artery Mix 150 TC VW Box Mod is constructed from zinc alloy and supports wattage adjustable from 5W to 150W. The TC mod supports temperature control from 200’F to 600’F.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12565-authentic-artery-mix-80-80w-tc-vw-variable-wattage-box-mod-white-zinc-alloy-580w-100300-c-200600-f-1-x-18650.html]Original Artery Mix 80 80W TC VW Box Mod[/URL][/U][/B] $30.99
Original Artery Mix 80W TC Box Mod slots itself as a flagship level single 18650 battery mod with a full feature set, including a three memory programmable curve mode and a large, six line OLED display packed into a compact and ergonomic chassis. The Mix 80W features a diverse range of output modes, with a standard power mode range of 5 to 80W, bypass mode, full temperature and TCR control, and a new Power Multiplication Graph Mode.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12559-authentic-lost-vape-triade-triple-dna250-tc-vw-variable-wattage-box-mod-pearl-coffee-zinc-alloy-1250w-3-x-18650.html]Original Lost Vape Triade Triple DNA250 TC VW Box Mod[/URL][/U][/B] $129.99
The Triade DNA 250 by Lost Vape is an updated version of the Triade DNA 200. Compared to its predecessor, the Triade DNA 250 features a 50 watt power increase to 250W, faster USB charging at 2 amps, a 55A current output limit, on-board reverse voltage protection, a higher current fuse and an easier stainless steel temperature control system.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12579-hadaly-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-stainless-steel-24mm-diameter.html#.WCpqd_RIQSc]Hadaly RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin 24mm[/URL][/U][/B] $8.99
The Hadaly Clone RDA is an innovative RDA for you flavor chasers out there. This RDA is amazing but if you looking for massive clouds this one is not for you. It is best suited for single coil builds. This RDA is in 24mm and comes with bottom feeder pin.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12562-shenray-corona-style-rta-rebuildable-tank-atomizer-silver-stainless-steel-glass-45ml-23mm-diameter.html]ShenRay Corona RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $20.99
The Corona Clone RTA by ShenRay is made from stainless steel and glass tank in 4.5ml capacity. The RTA supports 360 degree top filling system. Velocity Clone dual-pole supports dual or single coil build.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12561-origen-little-style-rta-rebuildable-tank-atomizer-silver-316-stainless-steel-pc-16mm-diameter.html]Origen Little RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $10.99
The Origen Little Clone RDA is in 316 stainless steel construction and PC tank and in 16mm diameter. This RTA is with dual-pole design and supports bottom feeder.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12560-sjmy-fire-bird-v2-style-rta-rebuildable-tank-atomizer-silver-black-golden-316-stainless-steel-glass-22mm-diameter.html]SJMY Fire Bird V2 RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $23.99
The SJMY Fire Bird Clone RTA is a Rebuildable tank atomizer with 22.7mm diameter and made from 316 stainless steel. This RDA comes with dual poles design and adjustable airflow control from the bottom. The V2 RTA and it’s drip tip is shorter than the first version, so the new one looks much beautiful.

[B][U][URL=http://www.3fvape.com/mod-kit/12573-authentic-artery-nugget-25-50w-1500mah-tc-vw-variable-wattage-mod-mate-tank-kit-silver-550w-2ml-05-ohm-200600-f.html]Original Artery Nugget 2.5 50W 1500mAh TC VW Mod + Mate Tank Kit[/URL][/U][/B] $39.99
The Original Artery Nugget 2.5 Kit is combined from a V2.0 80W mod and Mate tank. The V2.0 mod is built-in 1500mAh battery and supports maximum output up to 80W. The Mate tank is in 2.0ml and 0.5 ohm Kanthal A1 pre-made coils.

[B][U][URL=http://www.3fvape.com/coil/12574-authentic-freemax-starre-pure-tank-replacement-ccc-ceramic-cover-coil-heads-025-ohm-2070w-5-pcs.html]Original FreeMax Starre Pure Tank Replacement CCC Ceramic Cover Coil Heads 0.25 Ohm[/URL][/U][/B] $10.99
The Original FreeMax Starre Pure CCC Coil Ceramic cover coil is with Original Organic Japanese Cotton. It is known that ceramic is a very environmental and healthy material and it can insulate the heating to make the tank work efficiently and most important to keep the pure taste of the e-liquid, almost up to 100% pure. At the same time to prevent the tank getting hot so quick. 5 pcs in one backage. There are also available o.5 Ohm.

[B][U][URL=http://www.3fvape.com/clearomizer/12563-authentic-vaporesso-drizzle-tank-clearomizer-w-eco-universal-coil-black-18ml-18mm-diameter.html]Original Vaporesso Drizzle Tank Clearomizer w/ ECO Universal Coil[/URL][/U][/B] $20.99
The Drizzle Tank by Vaporesso features a sleek modern design, is easy to carry, and easier to use. The adjustable top airflow gives you the best MTL vaping experience. It adopts the ECO Universal Coil, so that you only need to replace the wick and coil parts without changing the metal sleeve that encases them, making this vape atomizer a truly ECO friendly and affordable vaping experience. Built with CCELL ceramic coil inside, it is guaranteed to deliver the most original flavor of your e-liquid. Relax with Drizzle Tank!

434

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12616-authentic-hopnvape-rashomon-rda-rebuildable-dripping-atomizer-silver-316-stainless-steel-24mm-diameter.html]Original Hopnvape Rashomon RDA Rebuildable Dripping Atomizer[/URL][/U][/B] $25.99
The Rashomon RDA is with unique Rashomon build deck. The coil will not deform when you screw down. Unique build deck; Easiest to build on; Easy to wick; Plenty of space for cotton; Bottom airflow; 510 adapter; Material: 316 stainless steel; PEEK insulator; PEEK block for single coil option.

[B][U][URL=http://www.3fvape.com/clearomizer/12612-authentic-youde-ud-vapwiz-pollux-22-mocc-sub-ohm-tank-clearomizer-silver-stainless-steel-glass-30ml-02-ohm-22mm.html]Original YouDe UD Vapwiz-Pollux 22 MOCC Sub Ohm Tank Clearomizer[/URL][/U][/B] $22.99
The Original YouDe UD Vapwiz-Pollux 22 MOCC Sub Ohm Tank is with separate airducts intake system. It is 100% leaking free and supplies e-juice original flavor. 510 threading connection; Top separate airducts intake system; 100% leaking free; Enjoy e-juice original flavor; Top filling system.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12603-authentic-hellvape-iron-maiden-rdta-rebuildable-dripping-tank-atomizer-silver-stainless-steel-glass-85ml-30mm-diameter.html]Original Hellvape Iron Maiden RDTA Rebuildable Dripping Tank Atomizer[/URL][/U][/B] $25.99
Iron Maiden is an Original design by Hellvape. It comes with 30mm Diameter and 22mm Operation Deck, Iron Maiden RDTA will become vapors new favorite. Approximate 10ml Tank Capacity, with 2mm by 3.5mm Large Post Hole, you can build very big Wire. Full Ceramic Chamber and Deck, you can get a pure taste. Unique Top and Regular AFC and Outstanding Anti-Spit back System, all best features come in to Iron Maiden now.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12600-shenray-sr-one-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-316-stainless-steel-25mm-diameter.html]ShenRay SR One RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $19.99
The ShenRay SR One Clone RDA is construction from 316 stainless steel and in 25mm diameter. 510 threading connection with adjustable copper center pin; 316 stainless steel construction; Adjustable Airflow, the shape of exclamation point adjust air holes; Wide Bore Stainless Steel drip tip and 510 POM drip tip adapter.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12599-shenray-fillian-25mm-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-25mm-diameter.html]ShenRay Fillian 25mm RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $27.99
The ShenRay Fillian 25mm Style RDA is constructed from stainless steel and in 25mm diameter. The deck is in Twisted Messes Style designed Post for single / dual coil build. There are three 2.5 x 10.5mm holes for airflow control.

[B][U][URL=http://www.3fvape.com/mechanical-mod/12615-rig-v3-style-mechanical-mod-terk-style-rda-atomizer-kit-black-red-aluminum-1-x-18650.html]Rig V3 Mechanical Mod Clone + Terk RDA Atomizer Clone Kit[/URL][/U][/B] $20.99
The Rig V3 Clone Mechanical mod is constructed from aluminum and powered by 1 x 18650 battery (not included) The Terk Clone RDA is combining a user-friendly clamp two-post shelf-style build deck and dual slotted airflow for a performance-oriented apparatus. With 20mm build deck, the Terk RDA implements a shelf-style two-post design and with clamp configurations.

[B][U][URL=http://www.3fvape.com/mod-kit/12611-authentic-smoktech-smok-osub-one-50w-2200mah-tc-vw-mod-helmet-nano-sub-ohm-tank-all-in-one-kit-silver-150w-17ml.html]Original SMOKTech SMOK Osub One 50W 2200mAh TC VW Mod + Helmet Nano Sub-Ohm Tank All-in-One Kit[/URL][/U][/B] $39.99
The integrated OSUB one kit adopts built-in tank that shortens the overall height of the kit which offers you convenient operation and portability. Long run-time is provided by built-in 2200mAh battery, massive cloud of vapor is ensured by 50W output power, and comfortable hand feeling comes from the zinc alloy material and paint finish. Open-eyed feel is from hard streamline, arched angle design and charming appearance of OSUB One Kit. There are different color for you choose.

[B][U][URL=http://www.3fvape.com/coil/12602-authentic-innokin-isub-ss-316-bvc-coil-head-for-isub-isub-s-isub-g-isub-v-isub-apex-tanks-05-ohm-3060w-5-pcs.html]Original Innokin iSub SS 316 BVC Coil Head for iSub / iSub S / iSub G / iSub V / iSub Apex Tanks[/URL][/U][/B] $7.99
The Original Innokin new 0.5 ohm iSub 316SS BVC replacement coil heads are the perfect match for your iSub sub ohm tank. These long-lasting replacement coil heads are wicked with 100% pure Organic Cotton and are constructed with 100% Stainless Steel. The iSub SS BVC coil heads are rated for best use between 30~60 watts, or 374~473’F in Temperature Control mode. The 0.5 Ohm, iSub 316 SS BVC coils can be fired in either TC or variable wattage (VW) mode. Its no surprise that this versatile wire is becoming increasingly popular with the vaping community.
It is compatible with iSub, iSub S, iSub G, iSub S, Isub V and iSub Apex tanks.

435

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12617-hexohm-30-style-180w-vv-variable-voltage-box-mod-w-led-screen-black-356v-2-x-18650-skull-pattern.html]Hexohm 3.0 180W VV Box Mod Clone w/ LED Screen[/URL][/U][/B] $47.99
The HexOhm 3.0 Clone VV mod has its own proprietary board that is rated for up to 30 Amps and is capable of 180W. The VV mod supports low voltage cutoff for battery protection, 10 second cutoff timer.The mod is with solid brass spring-loaded battery contacts. The magnets battery door is convenient to use. The mod is built-in spring loaded 510 pin and powered by 2 x 18650 batteries (>35A, not included).New Version with LED screen to show voltage. There are different pattern for you choose.

[B][U][URL=http://www.3fvape.com/drip-tip/12624-anti-spit-back-510-drip-tip-random-color-resin-17mm.html]Anti-Spit Back 510 Drip Tip[/URL][/U][/B] $2.99
This is an Anti-Spit Back 510 drip tip features 17mm length. The filter net in the drip tip will avoid the e-liquid spit out. Random color will be shipped (one piece)

[B][U][URL=http://www.3fvape.com/resistance-tester/12623-510-ego-808d-atomizer-resistance-tester-ohm-meter-black-aluminum-alloy-001999-ohm-001-ohm.html]510 / eGo / 808D Atomizer Resistance Tester[/URL][/U][/B] $8.99
The 510 / eGo / 808D atomizer resistance meter features 0.01~9.99 ohm testing range. It is built-in battery and supports USB charging.

[B][U][URL=http://www.3fvape.com/resistance-tester/12621-authentic-pilot-vape-super-ecig-tester-combo-ohm-meter-volt-meter-blue-001999-ohm-03999v-usb-1-x-18650.html]Original Pilot Vape Super Ecig Tester Combo Ohm Meter + Volt Meter[/URL][/U][/B] $30.99
The Original Pilot vape atomizer combo ohm meter and volt meter tester is powered by 18650 battery (not included). The resistance range is 0.01~9.99 ohm, the volt range is 0.3~9.99V. This tester comes with USB port.Water transfer printing blue.

[B][U][URL=http://www.3fvape.com/coil/12602-authentic-innokin-isub-ss-316-bvc-coil-head-for-isub-isub-s-isub-g-isub-v-isub-apex-tanks-05-ohm-3060w-5-pcs.html]Original Innokin iSub SS 316 BVC Coil Head for iSub / iSub S / iSub G / iSub V / iSub Apex Tanks[/URL][/U][/B] $7.99
The Original Innokin new 0.5 ohm iSub 316SS BVC replacement coil heads are the perfect match for your iSub sub ohm tank. These long-lasting replacement coil heads are wicked with 100% pure Organic Cotton and are constructed with 100% Stainless Steel. The iSub SS BVC coil heads are rated for best use between 30~60 watts, or 374~473’F in Temperature Control mode. It is compatible with iSub, iSub S, iSub G, iSub S, Isub V and iSub Apex tanks.

436

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12631-shenray-hadaly-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-316-stainless-steel-22mm-diameter.html]ShenRay Hadaly RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin [/URL][/U][/B] $14.99
The ShenRay Hadaly Clone RDA is an innovative RDA for you flavor chasers out there. This RDA is amazing but if you looking for massive clouds this one is not for you. It is best suited for single coil builds. This RDA is constructed from 316 stainless steel with Bottom Feeder Center Pin.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12627-authentic-hellvape-mostwanted-rda-rebuildable-dripping-atomizer-silver-316-stainless-steel-22mm-diameter.html]Original Hellvape Mostwanted RDA Rebuildable Dripping Atomizer[/URL][/U][/B] $20.99
The Original Hellvape Mostwanted RDA is designed by a group of masters of vaping devices, after three months of improvement and hundreds of revision, a small tiny RDA which chases best flavor taste comes now, he has an elegant appearance as well. We hope Mostwanted RDA will become your most wanted RDA in 2016. There are different color for you to choose.

[B][U][URL=http://www.3fvape.com/vape-tools/12632-multifunctional-vaper-tweezers-handle-tool-w-key-ring-for-e-cigarettes-black-nylon-724mm.html]Multifunctional Vaper Tweezers Handle Tool w/ Key Ring for E-Cigarettes[/URL][/U][/B] $0.99
The vaper tweezers handle tool is a multifunctional tool designed for vapers. This handle tool is also used like a spanner for tightening or loosening atomizers. It is compatible with RDA and atomizer. This tool it perfect to solve atomizer or oil stuck problem occasionally. The flexible tweezers handle tool supports 7~24mm so that vapers would not be bothered. 3 colors for you to choose.

437

[B][U][URL=http://www.3fvape.com/misc/12639-zircon-decorative-ring-for-22mm-atomizers-silver-black-stainless-steel-30mm-diameter.html]Zircon Decorative Ring for 22mm Atomizers[/URL][/U][/B] $8.99
This decorative ring is used for atomizers. It is made from Stainless Steel and Zircon. The Zircon on it makes the ring looks nice. If you want to decorate your atomizer and make your atomizer cool, the Zircon ring is here for you.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12638-sjmy-nolegal-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-cloud-cap-silver-316-stainless-steel-22mm.html]SJMY NoLegal RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin + Cloud Cap[/URL][/U][/B] $17.99
The SJMY NoName NoLegal Clone RDA is constructed from 316 stainless steel with bottom feeder pin and comes with Tank Cloud Cap; it is delivered with pre-assembled Bottom Feeder Pin and is ideally equipped for use as a squonker. But also as a traditional dripper, the RDA makes no compromises and delivers pure taste. A separate center pin for the regular operation as dripper is included. The 316 stainless steel construction is of high quality. The poles on the side of the small atomizer chamber allow for easy mounting and positioning of the coils, with the proven system.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12636-authentic-obs-engine-mini-rta-rebuildable-tank-atomizer-silver-stainless-steel-glass-35ml-23mm-diameter.html#.WDJZmblIQSc]Original OBS Engine Mini RTA Rebuildable Tank Atomizer [/URL][/U][/B] $20.99
The Original OBS Engine Mini RTA is constructed from stainless steel and Pyrex glass tank with 3.5ml capacity. The difference to the OBS Engine RTA is the diameter. The Engine Mini has a diameter of 23mm and thus fits many battery carriers without having to stand out. Convincing taste. The engine also has a simple Top fill system.

438

[B][U][URL=http://www.3fvape.com/clearomizer/12646-authentic-wotofo-serpent-sub-tank-atomizer-25mm-clearomizer-silver-stainless-steel-glass-5ml-25mm-diameter.html]Original Wotofo Serpent Sub Tank Atomizer 25mm Clearomizer[/URL][/U][/B] $24.99
The Original Wotofo Serpent Sub Tank is with replaceable coil. It is a great flavor Sub tank with 5ml capacity, using 510 drip tip. The Wotofo Serpent Sub tank is compatible with Kanger OCC coil and SSOCC coils.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12645-authentic-wotofo-conqueror-mini-rta-rebuildable-tank-atomizer-silver-stainless-steel-glass-25ml-22mm-diameter.html]Original Wotofo Conqueror Mini RTA Rebuildable Tank Atomizer[/URL][/U][/B] $22.99
The Wotofo Conqueror Mini RTA is with postless dual coil design. It is 2.5ml capacity. Also, the cotton, coil and juice hole are in the same level, so liquid conductivity is very nice. Conqueror Mini using Pyrex glass with 304 stainless steel, the whole RTA is very beautiful on a small box mod.

[B][U][URL=http://www.3fvape.com/clearomizer/12644-authentic-smoktech-smok-tfv8-cloud-beast-sub-ohm-tank-atomizer-rainbow-stainless-steel-glass-6ml-245mm-diameter.html]Original SMOKTech SMOK TFV8 CLOUD BEAST Sub Ohm Tank Atomizer[/URL][/U][/B] $30.99
The SMOK TFV8 brings the great power which will change your vaping life again. THE TFV8 CLOUD BEAST features 24.5mm diameter and 6ml e-juice capacity. TFV8 - the top level sub ohm atomizer, which adopts 4 Unique Patented Turbo Engines: V8-T8 (6.6T), V8-T6 (6.0T), V8-Q4 (5.0T), V8 RBA (4.0T-X), all of these make it to be a real Cloud Beast! The revolution of coil and airflow make TFV8 to be a vapor beast with higher performance!

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12641-authentic-wismec-cylin-plus-rta-rebuildable-tank-atomizer-silver-stainless-steel-glass-35ml-22mm-diameter.html]Original Wismec Cylin Plus RTA Rebuildable Tank Atomizer[/URL][/U][/B] $22.99
The Original Wismec Cylin Plus RTA, an updated version of Cylin RTA, brings forth such remarkable feature as its atomizer base with elastic contact. Differing from the previous ones, Cylin Plus is newly added with Clapton Coil 0.4ohm which will bring you larger vapor and better flavor. Moreover, the special base structure makes it possible to be both an RDA and RTA.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12640-kayfun-v5-kayfun-5-style-rta-rebuildable-tank-atomizer-silver-stainless-steel-4ml-22mm-diameter.html]Kayfun V5 Kayfun 5 RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $14.99
The Kayfun V5 Kayfun 5 Clone RTA is an update edition of Kayfun Mini V3 style RTA. It comes with more airflow, more juice control, and a redesigned deck is just the beginning. The Kayfun V5 style RTA features 4ml e-liquid capacity with glass tank, and 5ml capacity with SS sleeve. It will give you more one choices.

[B][U][URL=http://www.3fvape.com/mod-kit/12652-authentic-eleaf-aster-total-25w-1600mah-e-cigarette-starter-kit-silver-2ml-11-ohm.html]Original Eleaf ASTER Total 25W 1600mAh E-Cigarette Starter Kit[/URL][/U][/B] $28.99
The ASTER Total is an integration of both a battery and a tank in one unit yet still retains the ergonomically redesigned shape of original ASTER that perfectly fits in the palm of your hand. It is comfortable and easy to use with conveniently placed fire button and direct output voltage system. The e-liquid can easily be refilled by removing the top cap and the airflow can be adjusted to your preference. Also you can change the color of your ASTER Total whenever you like by replacing its leather sticker.

[B][U][URL=http://www.3fvape.com/mod-kit/12650-authentic-vaporesso-tarot-nano-80w-tc-2500mah-091-oled-vw-variable-wattage-mod-veco-tank-kit-silver-580w-2ml-22mm.html]Original Vaporesso Tarot Nano 80W TC 2500mAh 0.91 OLED VW Mod + Veco Tank Kit[/URL][/U][/B] $49.99
Target Nano Mod: Battery Capacity: 2500mAh; Variable Wattage Range: 5~80W; Resistance Range: 0.15~5 ohm; Standby Current: <35uA; Output Mode: VW / VT (Ni200, SS, Ti, TCR), BYPASS, CCW, CCT, Smart mode; Temperature Range: 100~315’C / 280’~600’F;
Veco Tank: Atomizer Dimension: 22 x 48mm; Atomizer Wight: 37g; Atomizer Capacity: 2ml; Diameter: 22mm; Top adjustable air flow; Top filling; EUC Coil system Ceramic or a traditional cotton choice. 4 colors for you to choose.

[B][U][URL=http://www.3fvape.com/drip-tip/12656-510-drip-tip-for-rba-rta-clearomizer-black-white-turquoise-stainless-steel-18mm.html]510 Drip Tip for RBA / RTA / Clearomizer[/URL][/U][/B] $3.99
The universal 50 drip tip is made from Turquoise (mouthpiece) and Stainless Steel (connector base). It is suitable for RDA / RTA / Clearomizer tank. There are different color for you to choose.

[B][U][URL=http://www.3fvape.com/drip-tip/12655-replacement-honeycomb-drip-tip-for-council-of-vapor-vengeance-atomizer-blue-white-acrylic-16mm.html]Replacement Honeycomb Drip Tip for Council of Vapor Vengeance Atomizer[/URL][/U][/B] $1.99
The honeycomb shield is attached to the bottom of the acrylic drip tip to prevent spit back. The acrylic drip tip is suitable for Council of Vapor Vengeance Atomizer.

[B][U][URL=http://www.3fvape.com/coil/12654-authentic-eleaf-replacement-ic-coil-head-for-icare-icare-mini-aster-total-silver-11-ohm-515w-5-pcs.html]Original Eleaf Replacement IC Coil Head for iCare / iCare Mini / ASTER Total [/URL][/U][/B] $3.79
Eleaf engineered a new atomizer head named IC 1.1 ohm Head for iCare series products and ASTER Total. It is consisted of a single coil and tiny in size. Small yet efficient, this new IC 1.1ohm Head is compatible with VW / Bypass / Smart mode and is able to deliver a satisfying amount of vapor with nice flavor especially for mouth to lung inhaling.

439

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12662-authentic-joyetech-cuboid-200-200w-096-oled-tc-vw-variable-wattage-box-mod-silver-1200w-3-x-18650.html]Original Joyetech Cuboid 200W 0.96"" OLED TC VW Box Mod[/URL][/U][/B] $39.99
Having the glossy zinc alloy shell with its premium finish, the Original Joyetech CUBOID 200 provides durability and reliability in its one of a kind style. Featuring 3 replaceable high-rate cells, it can be powered to 200W. The CUBOID 200 has a 0.96-inch OLED display, supporting VT / VW / TCR modes as well as real-time-clock, preheat and custom logo functions.
[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12667-authentic-desire-mad-dog-rda-rebuildable-dripping-atomizer-golden-aluminum-magnesium-alloy-pei-24mm-diameter.html]Original Desire Mad Dog RDA Rebuildable Dripping Atomizer[/URL][/U][/B] $24.99
The newest Desire Mad Dog RDA is a luxurious Rebuildable dripper atomizer. It comes with double convex dual-post build decks, which is designed for Clapton and fused coils. Ordinary coils could also be used. Adjustable bottom side airflow will provide enough air for vaping.
[B][U][URL=http://www.3fvape.com/clearomizer/12665-kraken-v25-style-tank-atomizer-silver-stainless-steel-glass-22mm-diameter-25ml.html]Kraken V2.5 Tank Atomizer Clone[/URL][/U][/B] $18.99
The Kraken V2.5 Clone atomizer features and easy-to-use quick release top fill cap, adjustable airflow and utilizes Kanger coils which is readily available in the market, stylish and comfortable defined.
[B][U][URL=http://www.3fvape.com/coil/12672-authentic-smoktech-smok-tfv8-baby-tank-v8-baby-m2-coil-head-silver-stainless-steel-03-ohm-2545w-5-pcs.html]Original SMOKTech SMOK TFV8 Baby Tank V8 Baby-M2 Coil Head[/URL][/U][/B] $14.99
The V8 Baby-M2 coil head is suitable for SMOK TFV8 Baby Beast tank atomizer / TV8 Big Baby / SMOK Alien Kit, SMOK G-Priv Kit / SMOK G320 Kit. The V8 Baby-M2 core features 0.3 ohm resistance that can support 25~45W power output (best for 35W). This SMOK TFV8 Baby coil head will bring you deep and rich cloud taste!
[B][U][URL=http://www.3fvape.com/misc/12673-pvc-heat-shrinkable-tube-wrap-sleeve-for-18650-battery-burberry-pattern-10-pcs.html]PVC Heat Shrinkable Tube Wrap Sleeve for 18650 Battery[/URL][/U][/B] $1.39
The sleeve is universal for 18650 batteries, such as: Sony VTC5, LGHE4, Samsung 25R, LGHG2 and more. 10 piece in one package. Available pattern: Burberry Pattern, Louis Vuitton Pattern, Gucci Pattern, Hulk Pattern, Batman Pattern.

440

[B][U][URL=http://www.3fvape.com/mechanical-mod/12685-kindbright-timekeeper-time-keeper-v2-style-mechanical-mod-golden-brass-1-x-18650.html]Kindbright TimeKeeper Time Keeper V2 Mechanical Mod Clone[/URL][/U][/B] $22.99
The Kindbright Timekeeper V2 Clone mechanical mod is made from Brass. The adjustable brass bottom-fire button with opposing earth magnet will be very easy for you to use.

[B][U][URL=http://www.3fvape.com/mechanical-mod/12683-hellboy-hybrid-style-mechanical-mod-black-copper-1-x-18650.html]Hellboy Hybrid Mechanical Mod Clone[/URL][/U][/B] $14.99
The Hellboy Clone Mechanical mod comes with hybrid adapter which is delrin-insulated for added safety. The mod is with adjustable silver-Plated copper top contact and recessed firing switch with reverse locking threads.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12682-goon-lp-style-rda-rebuildable-dripping-atomizer-brass-brass-24mm-diameter.html]Goon LP RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $7.99
The Goon RDA LP Clone RDA is constructed from brass and with wide bore drip tip. This RDA has a lower profile than its forerunner (duh) and uses airflow slots instead of airflow holes. Available colors are: Golden, Silver, Black.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12678-reload-style-rda-rebuildable-dripping-atomizer-golden-brass-24mm-diameter.html]Reload RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $10.59
The Reload Clone RDA is in 24mm diameter and constructed from brass. The RDA is with wide bore drip and quad air holes from the bottom for airflow control. The outer diameter of drip tip connector is 12.5mm, so it is compatible with the drip tip the same as Kennedy 24 / 25 RDA, 1/2 Goon RDA, Battle RDA and SMOK TFV8 tank.

[B][U][URL=http://www.3fvape.com/vape-tools/12690-authentic-pilot-vape-coil-magician-tab-ecig-tester-combo-ohm-meter-volt-meter-coil-jig-coiling-tool-silver-1-x-18650.html]Original Pilot Vape Coil Magician Tab Ecig Tester Combo Ohm Meter + Volt Meter + Coil Jig Coiling Tool[/URL][/U][/B] $45.99
The Original Pilot Coil Magician Tab combo ohm meter and volt meter tester is powered by 18650 battery (not included). The resistance range is 0.01~9.99 ohm, the volt range is 0.3~9.99V. The tester comes with coiling pole for coil building.

[B][U][URL=http://www.3fvape.com/vape-tools/12688-authentic-pilot-vape-coil-magician-mini-tab-ecig-ohm-meter-resistance-tester-black-0109-ohm-1-x-18650.html]Original Pilot Vape Coil Magician Mini TAB Ecig Ohm Meter Resistance Tester[/URL][/U][/B] $21.99
The Original Pilot Vape Coil Magician Mini TAB Yellow Ohm Meter Tester is with coil rebuilding deck and coil bumming. It is powered by 1 x 18650 battery and with reverse battery protection and short circuit protection.

[B][U][URL=http://www.3fvape.com/charger-adapter/12686-authentic-eleaf-icare-mini-2300mah-charger-pcc-for-icare-mini-black.html]Original Eleaf iCare Mini 2300mAh Charger PCC for iCare Mini[/URL][/U][/B] $10.99
The Eeaf iCare Mini PCC is specially made for charging the iCare Mini. Although the iCare Mini can be charged through the USB port as well, it will be much more convenient when on the go if you have a mobile charger for it. With a large battery capacity of 2300mAh, the iCare Mini PCC performs just like a power bank for the iCare Mini and will last you a rather long time of vaping. And due to its small size, you can always carry it with you easily.

441

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12694-authentic-hcigar-vt-167w-tc-vw-variable-wattage-box-mod-black-1167w-100300-c-200600-f-2-x-18650-evolv-dna-250-chipset.html]Original HCigar VT 167W TC VW Box Mod [/URL][/U][/B] $105.99
The Original HCigar VT 167W TC VW Box Mod is powered by Evolv DNA 250 Chipset. The VW mod supports wattage adjustable from 1~ to 167W and temperature control rang in 100~300’C / 200~600’F.

[B][U][URL=http://www.3fvape.com/mechanical-mod/12693-spartan-v2-style-mechanical-mod-brass-black-1-x-18650.html]Spartan V2 Mechanical Mod Clone[/URL][/U][/B] $19.99
The Spartan V2 Clone Mechanical Mod is made from brass and powered by 1 x 18650 battery (not included). The mod is with sleek ergonomic design and in 24mm diameter to fits most 24mm RDA.

[B][U][URL=http://www.3fvape.com/mechanical-mod/12692-tvl-style-mechanical-mod-brass-brass-1-x-18650-type-a.html]TVL Mechanical Mod Clone[/URL][/U][/B] $17.99
510 threading connection; Brass construction; 24mm diameter top deck; Bottom fire button; Powered by 1 x 18650 Battery (not included).There are available Type A and Type C.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12695-authentic-coilart-mage-combo-rdta-rebuildable-dripping-tank-atomizer-silver-stainless-steel-glass-4ml-24mm-diameter.html]Original CoilArt MAGE Combo RDTA Rebuildable Dripping Tank Atomizer[/URL][/U][/B] $39.99
The CoilArt MAGE Combo RDTA has 4.0ml juice volume; Cold-plated 510 contact; Adjustable bottom airflow; Adjustable top airflow; 24k Gold plated building posts; Interchangeable building posts; Extra Bridge posts(included); PEEK insulator; SUS304 stainless steel; Food grade Pyrex glass; 24mm diameter; 54mm overall height.

442

[B][U][URL=http://www.3fvape.com/mechanical-mod/12697-consvr-style-mechanical-mod-black-brass-1-x-18650.html]Consvr Mechanical Mod Clone[/URL][/U][/B] $21.99
The Consvr (connoiseur) Clone mechanical mod is constructed from brass and powered by 1 x 18650 battery (not included).

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12702-rogue-usa-style-rda-rebuildable-dripping-atomizer-golden-brass-24mm-diameter.html]Rogue USA RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $9.59
The Rogue Clone RDA is constructed from Brass and in 24mmm diameter. The RDA is with Rogue USA Clone RDA is changed from Goon Clone RDA. The RDA is with Rogue Clone engraved in the sleeve and Goon Clone Deck.

[B][U][URL=http://www.3fvape.com/coil/12701-authentic-wismec-ds-dual-coil-heads-for-motiv-kit-orma-tank-silver-025-ohm-2560w-5-pcs.html]Original Wismec DS Dual Coil Heads for Motiv Kit / ORMA Tan[/URL][/U][/B] $9.99
The DS Dual Coil is compatible with Wismec Motiv Kit / ORMA TankIt consists of two stainless steel coils vertically placed within it. Its 25~60W wattage gives you excellent taste and massive cloud. Moreover, it’s compatible with VW and Bypass modes for diverse experience.

[B][U][URL=http://www.3fvape.com/drip-tip/12700-universal-510-drip-tip-random-color-resin-stainless-steel-15mm.html]Universal 510 Drip Tip [/URL][/U][/B] $2.99
The 510 drip tip is made from resin (mouthpiece) and stainless steel (connector base). The drip tip is shipped in random color (one piece).

[B][U][URL=http://www.3fvape.com/wick-wire-mesh/12699-authentic-demon-killer-muscle-cotton-organic-cotton-fiber-white-10g-035oz.html]Original Demon Killer Muscle Cotton Organic Cotton Fiber[/URL][/U][/B] $2.99
The Original Demon Killer Muscle cotton uses a proprietary purifying process at their states of the art GMP certified facility that removes all impurities, natural oils, and pesticides to ensure that the wick is 100% tasteless. This gives the cloud chaser the purest taste without any unwanted flavor and with no break-in period needed.

443

[B][U][URL=http://www.3fvape.com/mod-kit/12718-authentic-geekvape-karma-kit-mechanical-mod-2-in-1-rdta-rda-atomizer-copper-copper-stainless-steel-1-x-18650-25mm.html]Original GeekVape Karma Kit Mechanical Mod + 2-in-1 RDTA / RDA Atomizer[/URL][/U][/B] $39.99
The GeekVape Karma kit is a specially designed starter kit for vapers who pursuit the ultimate vaping experience. The kit includes a beautifully crafted mechanical mod made of polished copper and a two in one atomizer. That can be easily switched between RDTA and RDA.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12714-kindbright-reload-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-22mm-diameter.html]Kindbright Reload RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $10.99
The Reload Clone RDA is in 22mm diameter and constructed from 304 stainless steel. The RDA is with wide bore drip and quad air holes from the bottom for airflow control. The outer diameter of drip tip connector is 12.5mm, so it is compatible with the drip tip the same as Kennedy 24 / 25 RDA, 1/2 Goon RDA, Battle RDA and SMOK TFV8 tank. 3 colors for you to choose.

[B][U][URL=http://www.3fvape.com/107127-cart_default/authentic-wotofo-conqueror-mini-rta-rebuildable-tank-atomizer-black-stainless-steel-glass-25ml-22mm-diameter.jpg]Original Wotofo Conqueror Mini RTA Rebuildable Tank Atomizer[/URL][/U][/B] $23.99
The Wotofo Conqueror Mini RTA is with postless dual coil design. It is 2.5ml capacity. Also, the cotton, coil and juice hole are in the same level, so liquid conductivity is very nice. Conqueror Mini using Pyrex glass with 304 stainless steel, the whole RTA is very beautiful on a small box mod.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12707-goon-lp-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-silver-stainless-steel-24mm-diameter.html]Goon LP RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $11.99
The Goon LP Clone RDA with bottom feeder pin is constructed from stainless steel and in 24mm diameter. This RDA has a lower profile than its forerunner (duh) and uses airflow slots instead of airflow holes. The RDA comes with PEI wide bore drip tip (12.5mm connector outer diameter), the same as Goon 528 RDA / Kennedy RDA / Battle RDA drip tip. There are available Titanium Alloy one for you choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12703-terminus-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]Terminus RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $9.99
The Terminus Clone RDA is constructed from stainless steel, 24mm diameter and with two plate-style posts and four individual lead slots. The Terminus Clone RDA features a 6mm deep juice, two-piece sleeve with giant airflow windows. 3 colors for you to choose.

[B][U][URL=http://www.3fvape.com/e-liquid/12712-authentic-blue-devil-e-liquid-e-juice-for-electronic-cigarettes-30ml-3mg-70vg-30-pg.html]Original Blue Devil E-liquid / E-Juice for Electronic Cigarettes[/URL][/U][/B] $10.99
The Original Blue Devil E-liquid / E-Juice is in 30ml capacity, 3mg Nicotine Levels, with 70% VG and 30% PG.

[B][U][URL=http://www.3fvape.com/drip-tip/12711-replacement-drip-tip-for-kennedy-24-25-goon-goon-lp-battle-reload-rda-random-color-resin-128mm.html]Replacement Drip Tip for Kennedy 24 / 25 / Goon / Goon LP / Battle / Reload RDA[/URL][/U][/B] $2.99
This is a wide bore drip tip made from resin. It is suitable for Kennedy 24 / 25 / Wide Bore Goon / Goon LP / Battle / Reload RDA. This wide bore drip tip features 12.8mm length, 16mm outer diameter and 12.4mm inner diameter. With the hollow center, this drip tip will bring you good vaping experience! The resin drip will be shipped in random color (one piece).

[B][U][URL=http://www.3fvape.com/misc/12710-sjmy-replacement-pc-tank-for-doggystyle-doggy-rta-translucent.html]SJMY Replacement PC Tank for Doggystyle Doggy RTA[/URL][/U][/B] $2.99
This Replacement PC Tank is suitable for Doggystyle RTA manufactured by SJMY.

444

[B][U][URL=http://www.3fvape.com/mechanical-mod/12751-kindbright-rosefinch-rose-finch-competition-style-mechanical-mod-brass-brass-1-x-18650.html]Kindbright RoseFinch Rose Finch Competition Mechanical Mod Clone[/URL][/U][/B] $24.99
The Rose Finch Clone mechanical mod is in 24.5mm diameter. The Rose Finch style mode features a full brass body as well as silver plated contacts to provide maximized conductivity.

[B][U][URL=http://www.3fvape.com/clearomizer/12752-authentic-ijoy-tornado-hero-rta-sub-ohm-tank-silver-stainless-steel-glass-52ml-25mm-diameter.html]Original IJOY Tornado Hero RTA / Sub-Ohm Tank[/URL][/U][/B] $29.99
The IJOY Tornado Hero builds upon the original IJOY Tornado RDTA. The redesigned Kennedy-style airflow system, focused directly to coils. Powerful Juice Flow Control applicable to both Rebuildable deck and pre-made coil. Manufactured out of 304 Stainless Steel and high quality glass, the IJOY Tornado Hero combines an elegant, efficient chassis with class leading performance. There are different colors for you to choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12740-authentic-smoktech-smok-skyhook-rdta-rebuildable-dripping-tank-atomizer-silver-stainless-steel-glass-5ml-245mm-diameter.html]Original SMOKTech SMOK Skyhook RDTA Rebuildable Dripping Tank Atomizer[/URL][/U][/B] $30.99
Smok Skyhook RDTA is another beastly atomizer after the famous TFV8 Cloud Beast tank, it fires up to 260 watts, so you know it will bring you a surprising experience that having extremely huge and dense clouds with pure flavor, this RDTA tank features two outstanding design. there are different color for you to choose.

[B][U][URL=http://www.3fvape.com/mod-kit/12736-authentic-wismec-reuleaux-rxmini-80w-2100mah-tc-vw-variable-wattage-mod-reux-mini-tank-kit-silver-180w-2ml-02-ohm.html]Original Wismec Reuleaux RXmini 80W 2100mAh TC VW Mod + Reux Mini Tank Kit[/URL][/U][/B] $44.99
Reuleaux RXmini, a scaled-down version of RX series, designed by JayBo, comes with a compact size which is convenient to hold and use. Powered by 2100mAh built-in battery, 80W high power output will bring you wonderful vaping experience. Apart from multiple colors and changeable stickers for your preference, the upgradeable firmware always enables it up-to-date. With top filling system and bottom airflow control, Reux Mini can perfectly fit Reuleaux RXmini.

[B][U][URL=http://www.3fvape.com/mod-kit/12731-authentic-smoktech-smok-stick-v8-3000mah-battery-tfv8-baby-tank-starter-kit-silver-5ml-03-ohm-245.html]Original SMOKTech SMOK Stick V8 3000mAh Battery + TFV8 Baby Tank Starter Kit[/URL][/U][/B] $39.99
Stick V8 is the newest pen Clone starter kit from SMOK, which brings the user experiences to the top level of its kind, the battery has a 3000mAh super high capacity and 20amps continuous discharge capability, while its tank is the famous TFV8 big baby tank which is 5ml and shares all the baby beast coils, when used with the included baby M2 0.3 ohm coil head, it will bring you a smooth and flavorful clouds, besides its swivel top cap design just brings you so much convenience when refills, 3 Colors for you to chose.

[B][U][URL=http://www.3fvape.com/mod-kit/12726-authentic-smoktech-smok-skyhook-rdta-220w-096-tc-vw-box-mod-rdta-tank-kit-silver-6220w-100300-c-200600-f-2-x-18650.html]Original SMOKTech SMOK Skyhook RDTA 220W 0.96 TC VW Box Mod + RDTA Tank Kit[/URL][/U][/B] $59.99
The SMOK Skyhook RDTA Box 220W Kit is all-in-one box mod with Rebuildable drip tank atomizer inside. It has a super large 9ml tank build inside the mode, Powered by two removable 18650 batteries, you can vape this RDTA box mod as high as 220w. The deck is having the patented floating velocity Clone post so underneath makes the super large wicking slots for endless liquid feed capabilities. There are two atomizer tubes included for the most airflow channels choice, bottom & middle airflow, bottom airflow or middle air flow only. There for different color for you to choose.

445

[B][U][URL=http://www.3fvape.com/mechanical-mod/12771-dragon-style-mechanical-box-mod-golden-aluminum-brass-2-x-18650.html]Dragon Mechanical Box Mod Clone[/URL][/U][/B] $11.99
This Dragon Clone Mechanical Box Mod is constructed from aluminum and brass.With recessed 510 threading connection with adjustable silver-plated copper center screw. It is powered by dual 18650 batteries (not included).

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12754-authentic-unicorn-tf200-200w-tc-vw-variable-wattage-box-mod-black-zinc-alloy-6200w-150315-c-300600-f-2-x-18650.html]Original Unicorn TF200 200W TC VW Box Mod[/URL][/U][/B] $49.99
The Original Unicorn TF200 200W Box Mod is with Transformer style design and constructed from zinc alloy supports wattage adjustable from 6W to 200W. It has many best features: Zinc alloy construction; Variable Wattage: 6~200W (in 5W increments); Working voltage: 6.6~8.4V; Temperature control range: 150~315’C (in 5’C increments) / 300~600’F (in 5’F increments); Low Voltage Protection: 6.6V; Over time protection: 15s; Short circuit protection: 0.07 ohm; Current: =<300uA. This Unicorn TF200 200W Box Mod Powered by 2 x 18650 batteries (not included). Different color you can choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12772-mad-dog-style-rda-rebuildable-dripping-atomizer-black-aluminum-alloy-pei-24mm-diameter.html]Mad Dog RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $8.99
The Mad Dog Clone will provide you with massive vapor cloud every time. It comes with double convex 2-post build decks, which is designed for Clapton and fused coils. You can also use it with ordinary coils. And adjustable bottom side airflow will provide enough air during the vaping. And condensates won’t be inhaled to your mouthpiece with the PEI drip tip. There are different color for you to choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12763-kindbright-doode-style-rda-rebuildable-dripping-atomizer-brass-stainless-steel-brass-24mm-diameter.html]Kindbright Doode RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $11.99
This Kindbright Doode Clone RDA is with a unique and elegant deck. There are two positions for the mounting of the coils. The wires are inserted into the posts from above and fixed by simple rotation. The collet inserts inside the post can be removed and exchanged for another. The adjustable airflow control is via the top cap and supports dual coil build. 3 colors for you to choose.

[B][U][URL=http://www.3fvape.com/mod-kit/12758-switch-mods-v2-style-mechanical-mod-rda-kit-brass-brass-1-x-18650.html]Switch Mods V2 Mechanical Mod Clone + RDA Kit[/URL][/U][/B] $20.99
The Switch Mods V2 Clone Mechanical Mod is made from Brass and powered by 1 x 18650 battery (not included). The Switch Mods V2 Clone RDA atomizer feature 24mm diameter and 3-post design deck. It is easy to carry and will bring you wonderful vaping experience! Available colors are: Brass, Copper, Black+Golden, Silver+Red.

[B][U][URL=http://www.3fvape.com/vape-tools/12767-vaping-carrying-buckle-for-e-cigarette-black-pc-stainless-steel.html]Vaping Carrying Buckle for E-Cigarette [/URL][/U][/B] $4.99
This Vaping Carrying Buckle is made from PC and stainless steel. It is very convenient to carry your mod kits as vaping. The buckle can be used as handle between the mod and the atomizer.

[B][U][URL=http://www.3fvape.com/coil/12766-authentic-innokin-replacement-kanthal-bvc-coil-head-for-slipstream-tank-kroma-kit-08-ohm-2035w-5-pcs.html]Original Innokin Replacement Kanthal BVC Coil Head for Slipstream Tank / Kroma Kit-0.8 Ohm[/URL][/U][/B] $9.89
This 0.8 Ohm Kanthal BVC coil is a general-purpose coil that’s ideal for all day vaping. It is compatible with the Slipstream atomizer tank / Kroma starter kit and Pebble mid-power vaping starter kit. The 0.8 Ohm coil produces good flavor when fired at wattage settings between 20 and 35 Watts. Kanthal wire atomizer coils can’t be used in temperature control mode. 5pcs in one package.

[B][U][URL=http://www.3fvape.com/coil/12765-authentic-innokin-replacement-ss316l-coil-head-for-slipstream-tank-kroma-kit-05-ohm-160230-c-320446-f-5-pcs.html]Original Innokin Replacement SS316L Coil Head for Slipstream Tank / Kroma Kit - 0.5 Ohm [/URL][/U][/B] $9.89
The 0.5 Ohm stainless steel coil enhances flavor production. It can also generate bigger clouds - especially with the Slipstream tank adjusted for wide airflow. It is compatible with the Slipstream atomizer tank / Kroma starter kit and Pebble mid-power vaping starter kit. These Slipstream, BVC (bottom vertical coils) allow inhaled air to pass down through the coil body, then up through the atomizer coils central airflow channel. 5pcs in one package.

446

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12784-authentic-sigelei-evaya-66-66w-tc-vw-variable-wattage-box-mod-silver-zinc-alloy-566w-100315-c-200600-f-1-x-18650.html]Original Sigelei Evaya 66 66W TC VW Box Mod[/URL][/U][/B] $82.99
This Sigelei 66 TC Box Mod is a highly capable output technology. It features a mid-wattage capability of 66W and temperature control suite within a beautifully crafted zinc alloy chassis with a stunning stabilized wood control face. Operational functionality is highly efficient with the standard three-button control and intuitive OLED display, along with the integration of the bottom-loaded battery disc. Performance caters to the mid-wattage segment, with power up to 66W and integrated temperature control module that supports Ni200 Nickel, Titanium, and Stainless Steel heating elements. 3 color fr you to choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12778-sjmy-ddp-one-style-rta-rebuildable-tank-atomizer-silver-316-stainless-steel-pc-2ml-22mm-diameter.html]SJMY DDP ONE RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $22.99
The SJMY DDP One Clone RTA is constructed from 316 stainless steel and PC tank, in 22mm diameter and 2.0ml capacity. The DDP One Clone RTA is easy liquid refilling design. Just remove the top cap, and fill liquid into a hole located in the side of the reducer.The chamber shroud directs air flow from the top of the cap to the lowest sides to hit vertical coils directly. This ensures proper air flow while maximizing flavor production and minimizing leakage even further. This shroud is a huge improvement over the traditional Genesis setup.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12777-sxk-ddp-one-style-rta-rebuildable-tank-atomizer-silver-316-stainless-steel-pc-2ml-22mm-diameter.html]SXK DDP ONE RTA Rebuildable Tank Atomizer Clone[/URL][/U][/B] $16.90
This SXK DDP RTA Rebuildable Tank Atomizer Clone is constructed from 316 stainless steel and PC tank, 2.0ml Capacity,22mm Diameter, With reducer for single / dual coil build; Ultem Inner AFC control air hole: 2.5mm / 1.5mm.

[B][U][URL=http://www.3fvape.com/misc/12789-replacement-bottom-feeder-center-pin-for-goon-rda-goon-lp-rda-golden-brass.html]Replacement Bottom Feeder Center Pin for Goon RDA[/URL][/U][/B] $0.99
This Bottom Feeder Center / Squonker Pin is made from brass with gold plated. It is suitable for 528 Goon (both 24mm and 22mm diameter). Please note that we are not sure if it is compatible with other Goon RDA in other site. Because most of Goon LP Clone RDA are not 1:1, this one is not compatible with Goon LP Clone RDA now. We are looking for another one to fit the Goon LP Clone RDA in 3Fvape.

[B][U][URL=http://www.3fvape.com/misc/12788-replacement-glass-tank-for-24mm-goon-style-rdta-atomizer-transparent-2-pcs.html]Replacement Glass Tank for 24mm Goon RDTA Atomizer Clone[/URL][/U][/B] $1.69
The replacement glass tank is suitable for 24mm diameter Goon Style RDTA Atomizer. 2 pcs in one package.

[B][U][URL=http://www.3fvape.com/misc/12787-replacement-glass-tank-for-22mm-goon-style-rdta-atomizer-transparent-2-pcs.html]Replacement Glass Tank for 22mm Goon RDTA Atomizer Clone[/URL][/U][/B] $1.69
This replacement glass tank is suitable for 22mm diameter Goon Style RDTA Atomizer. 2pcs in one package.

[B][U][URL=http://www.3fvape.com/drip-tip/12781-universal-510-drip-tip-black-ceramic-stainless-steel-23mm.html]Universal 510 Drip Tip[/URL][/U][/B] $1.99
The universal 510 drip tip is made from ceramic (mouthpiece) and stainless steel (connector base). There are different patterns for you to choose.

447

[B][U][URL=http://www.3fvape.com/clearomizer/12812-authentic-smoktech-smok-tfv8-big-baby-sub-ohm-tank-clearomizer-rainbow-5ml-015-ohm-245mm-diameter.html]Original SMOKTech SMOK TFV8 Big Baby Sub Ohm Tank Clearomizer[/URL][/U][/B] $28.99
The Oirginal SMOKTech TFV8 Big Baby is a bigger baby beast that let you enjoy more clouds & more freedom & more fun. It adopts the same baby beast engines: V8 Baby-X4 Core, V8 Baby-T6 Core and V8 Baby RBA. Meanwhile, both 5ml bigger e-juice capacity and more vapors will let you enjoy pleasant vaping time.

[B][U][URL=http://www.3fvape.com/drip-tip/12799-small-bore-drip-tip-for-22mm-rda-red-epoxy-resin-18mm.html]Small Bore Drip Tip for 22mm RDA[/URL][/U][/B] $3.99
This Small Bore Drip Tip is made from Epoxy Resin and is suitable for 22mm diameter RDA.

[B][U][URL=http://www.3fvape.com/drip-tip/12793-wide-bore-drip-tip-for-22mm-rda-red-epoxy-resin-17mm.html]Wide Bore Drip Tip for 22mm RDA[/URL][/U][/B] $3.99
This Wide Bore Drip Tip is made from Epoxy Resin and is suitable for 22mm diameter RDA.

[B][U][URL=http://www.3fvape.com/misc/12802-authentic-vapesoon-universal-silicone-sanitary-cap-combo-anti-slip-vape-band-anti-dust-cap-black.html]Original Vapesoon Universal Silicone Sanitary Cap / Combo Anti-Slip Vape Band + Anti-Dust Cap[/URL][/U][/B] $1.39
The Original Vapesoon Sanitary Cap can fit with any kinds of tank or vape kit with diameter in 19~25mm. The cap is compatible with any drip tip (mouthpiece) diameter from 7~17mm. The Sanitary Cap is sanitary cap, antiskid ring and Unbreak ring.

448

[B][U][URL=http://www.3fvape.com/mechanical-mod/12829-av-dexter-style-mechanical-mod-black-red-brass-carbon-fiber-1-x-18650.html]AV Dexter Mechanical Mod clone[/URL][/U][/B] $18.59
This AV Dexter Mechanical Mod clone has 510 threading connection; Powered by 1 x 18650 battery (battery not included); 18650 (only) tube for interchangeable sleeves for customized looks; Adjustable bottom-fire button with opposing rare earth magnets; Diameter: 24mm.

[B][U][URL=http://www.3fvape.com/mechanical-mod/12826-timekeeper-time-keeper-style-mechanical-mod-w-saw-blade-hybrid-top-hat-silver-brass-1-x-18650.html]Timekeeper Time Keeper Mechanical Mod Clone w/ Saw Blade Hybrid Top Hat[/URL][/U][/B] $19.69
The Timekeeper Clone mechanical mod with Saw Blade Hybrid Top Hat is made from Brass. The adjustable brass bottom-fire button with opposing earth magnet will be very easy for you to use. Believe this mod will bring you good vaping experience.

[B][U][URL=http://www.3fvape.com/mechanical-mod/12822-timekeeper-time-keeper-style-mechanical-mod-silver-brass-1-x-18650.html]Timekeeper Time Keeper Mechanical Mod Clone[/URL][/U][/B] $18.99
The Timekeeper Clone mechanical mod is made from Brass. The adjustable brass bottom-fire button with opposing earth magnet will be very easy for you to use. Hope this mod will bring you good vaping experience. Different color for you to choose, which makes your vaping life more colorful!

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12821-av-dexter-style-rda-rebuildable-dripping-atomizer-brass-brass-24mm-diameter.html]AV Dexter RDA Rebuildable Dripping Atomizer Clone [/URL][/U][/B] $9.99
AV Dexter Clone RDA is constructed from brass and in 24mm diameter. The RDA is with dual-pole deck and two air holes in the sleeve for airflow.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12819-authentic-geekvape-avocado-22-rta-rebuildable-tank-atomizer-black-stainless-steel-glass-30ml-22mm-diameter.html]Original GeekVape Avocado 22 RTA Rebuildable Tank Atomizer[/URL][/U][/B] $25.99
The Avocado RTA is constructed from stainless steel and glass with 3.0mL capacity and in 22mm diameter. The RTA is with Velocity Clone deck, dual-pole design. Adjustable airflow RTA, air flow is from the air inlet, goes through ceramic baffle board, blow straight on coil and brings you pure taste. 3 colors for you to choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12815-goon-lp-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-22mm-diameter.html]Goon LP RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $8.99
The Goon LP Clone RDA is constructed from stainless steel and in 22mm diameter. This RDA has a lower profile than its forerunner (duh) and uses airflow slots instead of airflow holes. The RDA comes with PEI wide bore drip tip (12.5mm connector outer diameter), the same as Goon 528 RDA / Kennedy RDA / Battle RDA drip tip. Available colors are: Black, Silver, Golden.

[B][U][URL=http://www.3fvape.com/mod-kit/12831-av-dexter-style-mechanical-mod-rda-kit-black-red-brass-carbon-fiber-24mm-diameter-1-x-18650.html]AV Dexter Mechanical Mod Clone + RDA Kit[/URL][/U][/B] $24.99
The AV Dexter Clone Mechanical Mod is made from brass (body) and carbon fiber (sleeve) and powered by 1 x 18650 battery (not included). The mode is with adjustable bottom-fire button with opposing rare earth magnets.The AV Dexter Clone RDA is constructed from brass and in 24mm diameter. The RDA is with dual-pole deck and two air holes in the sleeve for airflow.

[B][U][URL=http://www.3fvape.com/vape-tools/12814-authentic-avidartisan-daedalus-clapton-wire-diy-coil-jig-tool-set-without-drill-kit-for-rda-rta-rba-black.html]Original Avidartisan Daedalus Clapton Wire DIY Coil Jig Tool Set without Drill Kit for RDA / RTA / RBA [/URL][/U][/B] $22.99
The Daedalus Clapton Clapton DIY Tool is the best option for creating the perfect coil for your Rebuildable tank or dripper. Easy to build Clapton wire, flat Clapton wire, fused Clapton wire, stable Clapton wire etc. This Clapton Wire DIY Coil Jig Tool Set is without Drill Kit.

449

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12833-authentic-sigelei-t200-24-tft-touch-screen-bluetooth-tc-vw-variable-wattage-box-mod-silver-10200w-2-x-18650.html]Original Sigelei T200 2.4” TFT Touch Screen Bluetooth TC VW Box Mod[/URL][/U][/B] $105.99
The Sigelei T200 is powered by 2 x 18650 batteries (not included) that can fire up to max 200 watts. It can support TC mode and compatible with Ti / Ni200 / SS304 / SS316 / SS317 coils. High definition touch screen and constructed from Zinc Alloy, supporting various modes and wires, meanwhile also supporting the APP Bluetooth connection and free choices of wall paper and word colors. Different colors for you to choose.

[B][U][URL=http://www.3fvape.com/clearomizer/12836-authentic-blitz-keel-sub-ohm-tank-clearomizer-silver-4ml-025-ohm-22mm-diameter.html]Original Blitz Keel Sub Ohm Tank Clearomizer[/URL][/U][/B] $21.99
The Original Blitz Keel tank innovates a new way and technology to give vapor a wonderful experience. The unique design deals with some common problems, such as leakage and over heat.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12838-goon-lp-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-black-stainless-steel-24mm-diameter.html]Goon LP RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $8.99
This RDA has a lower profile than its forerunner (duh) and uses airflow slots instead of airflow holes. Comes with PEI wide bore drip tip (12.5mm connector outer diameter), the same as Goon 528 RDA / Kennedy RDA / Battle RDA drip tip. This RDA comes with bottom feeder pin.

[B][U][URL=http://www.3fvape.com/clearomizer/12845-authentic-eleaf-melo-rt-25-sub-ohm-tank-clearomizer-silver-45ml-015ohm-25mm-diameter.html]Original Eleaf MELO RT 25 Sub Ohm Tank Clearomizer [/URL][/U][/B] $19.99
The MELO RT 25 features its innovative Retractable Top (RT) fill solution which makes e-liquid refilling the easiest and most convenient ever. The new ERL series coil heads are skillfully designed for ultra-high power, enabling a huge amount of vapor production. The wide bore drip tip sits perfectly on the tank with a large diameter of 25mm. Also airflow can easily be adjusted by turning the control ring with knurled design.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12855-sxk-shift-style-rda-rebuildable-dripping-atomizer-w-bottom-feeder-pin-black-stainless-steel-22mm-diameter.html]SXK Shift RDA Rebuildable Dripping Atomizer Clone w/ Bottom Feeder Pin[/URL][/U][/B] $12.50
The SXK Shift RDA Rebuildable Atomizer is changed from the Shift RDA and with bottom feeder pin. The deck supports single and dual coil build. Comes with acrylic top cap; Diameter: 22mm.

[B][U][URL=http://www.3fvape.com/mod-kit/12835-revolver-reloaded-2-style-mechanical-mod-rdta-kit-copper-copper-glass-4ml-24mm-1-x-18650.html]Revolver Reloaded 2 Mechanical Mod Clone + RDTA Kit [/URL][/U][/B] $23.69
The Revolver Reloaded 2 RR2 Clone mod kit features an integrated RDTA system, it’s the first hybrid device for both professional and beginners. The RR2 has been engineered with a unique patented liquid filling system ‘DRIPT’, allowing users to rapidly fill the tank without having to open the device, no leaking, no mess, and no fuss. You’ll only have the need to open the device when changing out batteries and coils.

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12848-authentic-eleaf-aster-rt-4400mah-100w-tc-vw-variable-wattage-mod-with-melo-rt-22-atomizer-silver-1100w-38ml-03-ohm.html]Original Eleaf ASTER RT 4400mAh 100W TC VW Mod with MELO RT 22 Atomizer [/URL][/U][/B] $33.99
The ASTER RT is a skillfully designed Recessed Tank (RT) Clone compact mod that is able to hold and hide tanks up to 22mm diameter. It is pre-installed with the new firmware that has preheat function and custom logo as well as different interfaces for you to check your total puffs and total vaping seconds. Also the firmware is upgradeable to be always the latest. The MELO RT 22 features its innovative tractable Top (RT) solution which makes e-liquid refilling the easiest and most convenient ever. With a diameter of 22mm, the tank pairs perfectly with the ASTER RT. 5 colors for you to choose.

[B][U][URL=http://www.3fvape.com/drip-tip/12839-replacement-drip-tip-for-kennedy-24-25-goon-goon-lp-battle-reload-rda-brown-pei-13mm.html]Replacement Drip Tip for Kennedy 24 / 25 / Goon / Goon LP / Battle / Reload RDA[/URL][/U][/B] $2.59
This is a wide bore drip tip made from PEI. It is suitable for Kennedy 24 / 25 / Wide Bore Goon / Goon LP / Battle / Reload RDA. This wide bore drip tip features 13mm length, 17mm outer diameter and 12.6mm inner diameter. With the hollow center, this drip tip will bring you good vaping experience!

[B][U][URL=http://www.3fvape.com/drip-tip/12840-wide-bore-drip-tip-for-22mm-rda-random-color-resin-146mm.html]Wide Bore Drip Tip for 22mm RDA [/URL][/U][/B] $4.99
This Wide Bore Drip Tip is made from Resin and is suitable for 22mm diameter RDA,Widest outer diameter: 22mm; Height: 14.6mm; Connecter outer diameter: 20mm.

[B][U][URL=http://www.3fvape.com/drip-tip/12841-replacement-honeycomb-drip-tip-for-council-of-vapor-vengeance-atomizer-random-color-resin-133mm.html]Replacement Honeycomb Drip Tip for Council of Vapor Vengeance Atomizer[/URL][/U][/B] $3.59
The honeycomb shield is attached to the bottom of the resin drip tip to prevent spit back. The resin drip tip is suitable for Council of Vapor Vengeance Atomizer.

[B][U][URL=http://www.3fvape.com/coil/12843-authentic-blitz-keel-tank-replacement-ni200-coil-heads-015-ohm-5-pcs.html]Original Blitz Keel Tank Replacement Ni200 Coil Heads[/URL][/U][/B] $11.99
This Blitz Keel Tank Replacement Ni200 Coil Heads has Ni200 wire, support TC mode; 5 PCS in one package, Resistance: 0.15 Ohm, there are also available the Resistance of 0.25 Ohm.

[B][U][URL=http://www.3fvape.com/coil/12854-authentic-eleaf-erl-rba-head-for-melo-rt-25-atomizer-silver.html]Original Eleaf ERL RBA Head for MELO RT 25 Atomizer[/URL][/U][/B] $5.99
Being Rebuildable and reusable, this ERL RBA Head will provide you with DIY fun, allowing you to rebuild coils that cater to your needs in an economical way. It is compatible with the new MELO RT 25 atomizer.

[B][U][URL=http://www.3fvape.com/coil/12853-authentic-eleaf-erl-015ohm-head-for-melo-rt-25-atomizer-kanthal-50150w-5-pcs.html]Original Eleaf ERL 0.15ohm Head for MELO RT 25 Atomizer[/URL][/U][/B] $8.99
The new ERL 0.15ohm Head is consisted of single kanthal coil and is compatible with VW, Bypass and Smart modes. It is rated at an ultra-high power range of 50-150W, enabling an awesome vaping experience with huge vapor production.

[B][U][URL=http://www.3fvape.com/coil/12852-authentic-eleaf-erlq-015ohm-head-for-melo-rt-25-atomizer-kanthal-60200w-5-pcs.html]Original Eleaf ERLQ 0.15ohm Head for MELO RT 25 Atomizer[/URL][/U][/B] $9.99
The new ERLQ 0.15 ohm Head is consisted of quadruple kanthal coils and is compatible with VW, Bypass and Smart modes. It is rated at an ultra-high power range of 60~200W, enabling an awesome vaping experience with huge vapor production.

[B][U][URL=http://www.3fvape.com/coil/12851-authentic-eleaf-er-03-ohm-head-for-eleaf-aster-rt-with-melo-rt-22-ss316-40100w5-pcs.html]Original Eleaf ER 0.3 ohm Head for Eleaf ASTER RT with MELO RT 22[/URL][/U][/B] $8.99
The new ER 0.3ohm Head is consisted of single stainless steel 316 coil and is compatible with VW, Bypass, Smart, TC-SS and TCR modes. It can be used under high watts for cloud chasing and provides a great vaping experience with nice flavor.

450

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12871-pti-v3-style-rda-rebuildable-dripping-atomizer-silver-stainless-steel-24mm-diameter.html]PTI V3 RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $10.59
The PTI V3 Clone RDA has 510 threading connection; Dual-pole design; Stainless steel construction; Adjustable airflow control: 3 air holes on each side of the sleeve; Diameter: 24mm. Available colors are:Silver, Golden, Black.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12868-apocalypse-gen-2-style-rda-rebuildable-dripping-atomizer-black-stainless-steel-24mm-diameter.html]Apocalypse GEN 2 RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $9.99
The Apocalypse Gen 2 Clone RDA is with clamp design and has a massive 13mm space in each clamp which provides space for mounting the most complex & insane coil builds. Coupled with the 4mm deep juice well, 21mm build deck, durable post clamps and extended post screws, the Apocalypse is a builders dream. 4 colors for you to choose.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12866-kindbright-unholy-style-rda-rebuildable-dripping-atomizer-silverstainless-steel-24mm-diameter.html]Kindbright Unholy RDA Rebuildable Dripping Atomizer Clone[/URL][/U][/B] $10.99
The Kindbright Unholy Clone RDA has a dual-post vertical clamp system that had been proven very fun to build on. Deck is stainless steel, posts are silver plated copper and the juice well is 5mm deep and has 3 airflow options. Comes with a black delrin chuff cap (drip tip is kennedy sized so all your custom made tips will fit no problem). 3 colors for you to choose.

[B][U][URL=http://www.3fvape.com/mod-kit/12863-shenray-crossbones-hangman-style-mechanical-mod-unholy-style-rda-atomizer-kit-copper-copper-1-x-18650.html]ShenRay Crossbones Hangman Mechanical Mod Clone + Unholy RDA Atomizer Kit Clone[/URL][/U][/B] $27.99
The Deadwishes crossbones Clone mechanical mod is a one piece 26mm tube with hybrid connection. The switch comes out for you to put the battery inside and the switch has an isolated spring inside (the spring does not conduct any current).
The Kindbright Unholy Clone RDA has a dual-post vertical clamp system that had been proven very fun to build on. Deck is stainless steel, posts are silver plated copper and the juice well is 5mm deep and has 3 airflow options. Comes with a black delrin chuff cap (drip tip is kennedy sized so all your custom made tips will fit no problem).

[B][U][URL=http://www.3fvape.com/mod-kit/12859-kindbright-crossbones-hangman-style-mechanical-mod-unholy-style-rda-atomizer-kit-copper-copper-1-x-18650.html]Kindbright Crossbones Hangman Mechanical Mod Clone + Unholy RDA Atomizer Clone Kit [/URL][/U][/B] $29.99
The Deadwishes crossbones Clone mechanical mod is a one piece 26mm tube with hybrid connection. The switch comes out for you to put the battery inside and the switch has an isolated spring inside (the spring does not conduct any current).
The Kindbright Unholy Clone RDA has a dual-post vertical clamp system that had been proven very fun to build on. Deck is stainless steel, posts are silver plated copper and the juice well is 5mm deep and has 3 airflow options. Comes with a black delrin chuff cap (drip tip is kennedy sized so all your custom made tips will fit no problem).

[B][U][URL=http://www.3fvape.com/mod-kit/12858-diamondback-sleeve-limitless-style-mechanical-mod-kit-w-limitless-style-rdta-black-brass-1-x-18650-4ml-25mm-diameter.html]Diamondback Sleeve Limitless Mechanical Mod Kit Clone w/ Limitless RDTA Clone[/URL][/U][/B] $22.99
The Diamondback Sleeve Black Limitless Clone mechanical mod is constructed from Copper inner body and stainless Steel outer tube. The Limitless Clone mechanical mod is powered by 1 x 18650 battery (not included). It is a low cost mechanical mod that allows you to change the look and Clone of your mod with a limitless Clone of sleeve options. The Limitless Clone RDTA atomizer - 4ml, is a Rebuildable genesis Clone tank with 2 post deck. With 4ml e-liquid capacity, The Limitless Clone RDTA features innovative side filling, adjustable airflow, hybrid compatible and innovative cotton reservoirs.

[B][U][URL=http://www.3fvape.com/mod-kit/12857-dominus-style-hybrid-mechanical-mod-rda-kit-black-brass-1-x-18650-22mm-diameter.html]Dominus Hybrid Mechanical Mod Clone + RDA Kit[/URL][/U][/B] $24.99
This Dominus Hybrid Mechanical Mod Clone has Unique side firing button; Brass construction; Hybrid connection; Powered by 1 x 18650 battery (not included) This Dominus Hybrid RDA with Brass construction; Hybrid connection; Dual-pole design deck; Airflow from the bottom; Diameter: 22mm.

[B][U][URL=http://www.3fvape.com/drip-tip/12875-replacement-drip-tip-for-kennedy-24-25-goon-goon-lp-battle-reload-rda-random-color-epoxy-resin-118mm.html]Replacement Drip Tip for Kennedy 24 / 25 / Goon / Goon LP / Battle / Reload RDA[/URL][/U][/B] $2.99
This is a wide bore drip tip made from resin. It is suitable for Kennedy 24 / 25 / Wide Bore Goon / Goon LP / Battle / Reload RDA. This wide bore drip tip features 11.8mm length, 17.6mm outer diameter and 12.6mm outer connector diameter. With the hollow center,the resin drip will be shipped in random color (one piece).This drip tip will bring you good vaping experience!

[B][U][URL=http://www.3fvape.com/case-bag/12874-authentic-vapesoon-multifunctional-arm-bag-carrying-case-pouch-w-adjustable-strap-for-e-cigarettes-black.html]Original Vapesoon Multifunctional Arm Bag Carrying Case Pouch w/ Adjustable Strap for E-Cigarettes[/URL][/U][/B] $6.99
Original Vapesoon Multifunctional Arm Bag Carrying Case Pouch is with dual bag with zipper. The pouch is suitable for mobile phone, e-cigarette etc. With adjustable strap for convenient to carry as arm bag.

451

[B][U][URL=http://www.3fvape.com/vv-vw-mod/12879-authentic-joyetech-ocular-c-touchscreen-150w-tc-vw-variable-wattage-box-mod-silver-1150w-100315-c-200600-f-2-x-18650.html]Original Joyetech OCULAR C Touchscreen 150W TC VW Box Mod[/URL][/U][/B] $49.99
The Joyetech OCULAR C is a touch screen box mod with a very smart internal system. The VW TC mod features a photo gallery, music player and pedometer function as well as upgradeable firmware. It can be powered by 2 18650 batteries to reach up to 150 watts. Available colors are: Grey, Black, Silver.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12877-authentic-blitz-enterprises-warcraft-rta-rebuildable-tank-atomizer-silver-stainless-steel-glass-4ml-23mm-diameter.html]Original Blitz Enterprises Warcraft RTA Rebuildable Tank Atomizer[/URL][/U][/B] $21.99
The Oreiginal Blitz Enterprises Warcraft RTA is constructed from stainless steel and glass tank with 4ml juice capacity. The RTA is in 23mm diameter and with dual-pole Velocity style deck design. The airflow is from the bottom to the center post and it is innovative juice flow control system.

[B][U][URL=http://www.3fvape.com/rebuildable-atomizer-supply/12876-lost-art-goon-style-rda-rebuildable-dripping-atomizer-w-wide-bore-drip-tip-golden-stainless-steel-24mm-diameter.html]Lost Art Goon RDA Rebuildable Dripping Atomizer Clone w/ Wide Bore Drip Tip[/URL][/U][/B] $9.99
The Lost Art Goon Clone RDA is a 24mm RDA that uses an innovative bridge clamp design unrivaled by any other design in the industry. Brass construction; 510 threading connection; copper or stainless steel center pin will be shipped in random;
Quad-pole design; with adjustable top airflow valve; wide bore drip tip: 12mm connection diameter.

[B][U][URL=http://www.3fvape.com/mod-kit/12882-authentic-eleaf-istick-pico-75w-tc-vw-box-mod-melo-iii-mini-tank-kit-black-bronze-175w-1-x-18650-2ml-22mm.html]Original Eleaf iStick Pico 75W TC VW Box Mod + MELO III Mini Tank Kit [/URL][/U][/B] $37.99
Tihs Original Eleaf iStick Pico With a compact size can fit perfect in your palm, much more convenient for usage and portability. Powered by 1 x 18650 cell, the iStick Pico also provides you with 75W maximum power output and switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes. Unique Bottom Design ,The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well. It ispreferable, innovative, compact and outstanding (PICO). The new MELO III Mini is the best match for the iStick Pico.

[B][U][URL=http://www.3fvape.com/drip-tip/12891-replacement-honeycomb-drip-tip-for-council-of-vapor-vengeance-atomizer-random-color-resin-16mm.html]Replacement Honeycomb Drip Tip for Council of Vapor Vengeance Atomizer[/URL][/U][/B] $2.99
The honeycomb shield is attached to the bottom of the resin drip tip to prevent spit back. The resin drip tip is suitable for Council of Vapor Vengeance Atomizer. Height: 16mm, Connector diameter: 11.5mm; diameter: 13.2mm.

[B][U][URL=http://www.3fvape.com/drip-tip/12890-replacement-wide-bore-drip-tip-for-aspire-cleito-120-tank-random-color-resin-153mm.html]Replacement Wide Bore Drip Tip for Aspire Cleito 120 Tank[/URL][/U][/B] $3.99
The Wide Bore Drip Tip is suitable for Aspire Cleito 120 Tank. This drip tip is made from resin and will be shipped in random color (one piece).

[B][U][URL=http://www.3fvape.com/drip-tip/12889-colorful-510-drip-tip-for-rda-rta-clearomizer-black-red-acrylic-165mm.html]Colorful 510 Drip Tip for RDA / RTA / Clearomizer[/URL][/U][/B] $1.99
This universal 510 drip tip is made from acrylic (mouthpiece) and stainless steel (base). It is with 9mm inner bore diameter.

[B][U][URL=http://www.3fvape.com/drip-tip/12885-replacement-wide-bore-drip-tip-for-aspire-cleito-120-tank-random-color-resin-152mm.html]Replacement Wide Bore Drip Tip for Aspire Cleito 120 Tank [/URL][/U][/B] $4.99
The Wide Bore Drip Tip is suitable for Aspire Cleito 120 Tank. This drip tip is made from resin and will be shipped in random color (one piece).

[B][U][URL=http://www.3fvape.com/drip-tip/12884-510-drip-tip-adapter-for-smok-tfv8-tank-tfv8-big-baby-tank-silver-stainless-steel.html]510 Drip Tip Adapter for SMOK TFV8 Tank / TFV8 Big Baby Tank[/URL][/U][/B] $1.99
This 510 Drip Tip Adapter is made from stainless steel and suitable for SMOK TFV8 Tank / TFV8 Big Baby Tank. With this adapter, you can use the standard 510 drip tip in your TFV8 / TFV8 Big Baby Tank.