Kylin RTA by Vandy Vape is my favorite right now followed closely with the Pharaoh RTA. Just ordered another Kylin in Red in fact to match a new mod. Love it. Easy to build on and great flavor.
1 Like
Just for the record, today I received a Sherman RTA clone and it seems to be a perfect 1-1 clone. Feels exactly like the original and more importantly, vapes exactly like the original. At $23 itās a great buy.
2 Likes
Merlin Miniā¦Goblin Mini V-3ā¦
1 Like
Still in love with the Wismec Theorem here, using my custom ādual paralleledā 0.23-0.25 SS single coils. Part of the key in this combination though is using a friction fit drip tip (the stock glass one sucks) that IIRC has an ID of 7.3mm. Most 510 drip tips are substantially smaller IME and choke the crap out of flavor.
Loved the Cleito for quite awhile, but this is so much faster and easier to build, and the āchimneyā is even shorter on the Theorem, so better flavor.
Still most like Aromamizers V1 and V2. One new bit of info is my Simba by UD using a ceramic cup coil head is giving supurb flavor at only 16 watts .5 ohms resistance. I kept my cereal vape in it, but recently moved to a fruit combo. It never leaks even when I open it to fill it and I donāt even bother to close the juice flow. Wonderful tasting and excellent running tank. Iāll be able to re-build the SS ceramic cup coils that I bought for it.
Iām also using a few SMOK RDTAs and one SMOK G4 that has 4 coils. I must dilute my ejuice in it or the flavor is too strong. Yesā¦That is true and still the case. I put new Clapton coils in it and still have the same outcome.
Iām using 2 Chuluha. People who are mouth-to-lung hitters would love them.
I also have a Griffin, Avocado, Therom, and TFV$, TFV8 and a Baby Beast.
I have a Goliath that drinks down juice very fast and therefore gives wonderful flavor.
All I own and use that Iāve listed give good flavor. If not, I would not keep them.
I have a Cleito that Iāve used store-bought coils on and the RBA deck. It is going because flavor is less than.
The Baby Beast is great if you want to buy rather than build coils. Same as most SMOK tanks, i.e., TFV8. Now I hear the TFV12 is good, but I havenāt tried it. I donāt run at high wattages. Mostly I run at about 24 watts. Recently I got a Vape Forward one battery mod at 40% off and it is a really good mod. I also love my Presa by Wismec. Iād say IPV is quality. I wouldnāt buy another Fuchi by Sigelei. Iāve had 2 go dead on me. My third is still working withouit issues.
Youāve never told me what and how you build in the aromaizer v1 and the pg/vg ratio.
My Melo 2/3. I put RBAs in there and still use them alongside my RTAs, especially for going out. Just so problem free, if anything bad occurs (accidental dry hit ftw, I am really good at that XD) I toss in a fresh RBA and vape on ^^
Iām hooked on my iJoy RDTA box (and iJoy RDTA box mini when out of the houseā¦Iām female, small, and letās face it - look like an idiot vaping on an RTDA thatās bigger than me LOL!). But, I also have a few Smok TFV4 (and yes, micro TFV4s) on the go too that I just love! 
1 Like
I build several different ways. Mostly Titanium about 8 wraps 2.5mm inside diameter. Sometimes I use Clapton coils. I prefer Silica wick rather than cotton or Cotton Bacon. Usually most of my coils are about .4 ohms resistance and I run at about 22 watts. Forgot to sayā¦ I mix at 70/30 VG/PG 3mg nicotine.
1 Like
hey Super Sam. On the subject of favorite modā¦ I just love my Wismec Presa 75 watt that only takes an 18650 battery. It fits in my hand so nice. I tried ordering two more one time, but I ended up getting a larger version that takes a 26650 battery. http://tse2.mm.bing.net/th?id=OIP.65Qpsk9fCak6vnae5woKZgEsEs&w=221&h=207&c=7&qlt=90&o=4&pid=1.7
1 Like
Hey Joy - that does look nice! Trying to justify in my head buying yet another mod now! Ha ha! 
Check out the Eleaf iStick TC60W - similar size-wise and great to hold too.
1 Like
I had a look at the IStick TC60W It is a tall and slim one indeed. I have an iStick TC100 and enjoy the button all down the side, and it is quiet. The one thing I donāt like about a Presa is every time you press power, thereās a āclickā, then off sounds another āclickā. So thatās two āclicksā for one puff. That puts me off. The SMOK Alien is the same way with click sounds, Iām sitting there in the livingroom and click, click, click click. Itā will drive ya buggy.
Uwell Crown III 
Curious about this tank looks awesome and I like the triple coil rba https://www.vaporl.com/smkon-v-engine-sub-ohm-tank-5-5ml.html# the v-p1 is what I want! Rite now Iām using rdas but when I use a tank itās my blazer 200 or tfv8
1 Like
Very interesting. Only in RBA mode thoughā¦canāt be renting my tanks
I have two kangertech top loaders but just got the smok baby beast and the crown 3 that are pretty awesome so far.
Exactly what Iām thinking! I actually just ordered it lol with only PBA function triple coil madness. It looks really cool with that setup! https://m.fasttech.com/products/3006/10019814/7643402-authentic-smkon-v-engine-tank-clearomizer Iām excited for it!
1 Like
Iāll be excited to hear your review. May be a nice tankā¦certainly looks unique. Tomorrow Iāll be spamming the Vape Mail thread and one other thread with photos of my newest addition to my mod family. Am certainly interested in finding a unique and intriguing topper for itā¦something in black that just looks killa.
2 Likes
The i-Joy combo rdta has been good, still hasnāt replaced my obs engine though. The tfv8 has been my office workhorse though. I am expecting my pulse 22 and db160 this week, thinking that is going to be the new office mod. Digging my recoil and govad for dripping, with a hadaly on the way, that might change too! Lol
1 Like
Iāll definitely let you know how it is probably gonna be awhile til it comes in fast tech is slow lol. Iāve recently got three new mods my two new favorites are the vaporesso tarot pro and the new voopoo drag both great mods both with adjustable wattage curves which I really enjoy for rdas. Iād like to see what your new mod is keep me postedš
1 Like