I’m not really familiar with what ohm I like. I know I like a warm vapor with nice flavor
Here are some links to info on ohm law with mech’s as you mentioned you are a new vaper
https://www.e-cigarette-forum.com/forum/blog-entry/14-ohms-law-explained-for-vapers.6293/
Samsung 25r has got a 20A CDR, and 4.2/20 = 0.21; so you need a build above 0.21 ohms
I’d say try a 6wrap dual coil at .25 but I’m sure rob will come back with a better answer
26g SS 316L wire ( 7 Full wraps on a 3mm bit will give you a .5 ohm coil )
http://www.steam-engine.org/coil.asp?mat=ss316l&r=0.5&awg=26&id=3
This is for a single coil ( IF ) you use 2 coils it will be cut in half so instead of .5 ohm it will be .25 ohm
Alright thanks for the help guys!
Thank You for your post good info. I didn’t know the video I was looking for was in the one post you added
Yea baditude’s blog has loads of good info , just a shame that forum has become so toxic
How is it going ? are you using a RDA or a RTA ?
@Darkspartan239 I would recommend getting one of these
https://www.elementvape.com/coil-master-multi-functional-521-tab
It’s going well. I did dual coil with 6 wraps at 0.3. So far its producing good flavor. Right now I am using an RDA, but I would like to get an RTA at some point because its more practical. I spoke to a guy at a local vape shop and he said for this box I probably shouldn’t get an RTA because its not regulated. What do you guy think?
You can run a RTA on a Mech Mod you just have to keep your ohm’s at a safe level
Okay, cause I really like the RTAs. Any that you would recommend? I was looking at the Griffin 25
I love my Kayfun 5 you can get the clone a lot cheeper
And you can get Extra Glass tanks for it
Alright, well thanks man!
Also check this out
http://forum.e-liquid-recipes.com/t/usa-united-squonkers-of-america/62136?u=rob62
That’s pretty cool! But I don’t think my setup would be suitable for that.
Do you mean the Squonking thread ?
Well, I don’t think I would be able to fit a bottle in my box
LOL … no you would have to get a Squonk Mod and a RDA with a Squonk Pin. But look around the thread we have some good ones on there
Ahh i gotcha! I mean I really like the idea! But, for now I think i’m gonna go with an RTA.