How's everybody building their kayfun v5

Hardware Rebuildable Atomizers and Tanks
7

316L 3mm ID 24g 6 Wraps 0.30 ohms

DSC05483.JPG2048×1536 951 KB

DSC05482.JPG2048×1536 968 KB

DSC05509.JPG2048×1536 1.21 MB

6 Likes
8

What gauge SS 316L wire ?

1 Like
9

Sorry thought I added that 24 gauge

EDIT: Went back and fixed it

1 Like
10

Nice looks good

1 Like
11

Got a 2.5mm ID 5/6 wraps (spaced just a little) of 26g/32g Kanthal Clapton, clocking in around 0.6 ohms (depending on mood), vaping it at 24-34W. Highly recommended :wink:

If I remember correctly, this is about a big as you can go in that chamber - according to the official numbers. It’s 5mm height of the coil including wire thickness, I think.

2 Likes
12

OK Kayfun owners… I’m not gonna be dropping $120 for an authentic… So, who’s got the low down on the best Kayfun clones? I’m in the market for a K Mini V3 (wife) and the K 5 (me). Thx! :grinning:

N’er mind, there’s a thread for this topic!

3 Likes
13

The SJMY or the SXK Check this out http://blog.3fvape.com/atomizer/sjmy-kayfun-v5-style-rta-review-comparison-with-authentic-kf5/

1 Like
14

Thanks
Guys went ahead ordered me one from 3fvape
Sjmy model on way here
Looks like I can just build my own restricter in the shop if it is too wide open

2 Likes
15

I’m using ti in mine, a 2.5 ID 7-8 wraps of 26g ohm’s out at .33. Great vape. :yum:

2 Likes
16

I’m glad you went with the SJMY it is a 1 to1 clone
The Restrictors come in 1.2 , 1.4 , and 1.6 mm @Pattie Like’s the 1.4 mm
I would Like a 1.4mm Soooo if you make one let me know :+1:

https://originvape.com/product/svoe-mesto-kayfun-5-mouth-lung-kit/

1 Like
17

2.5 ID, 4 wrap fused clapton 28/32 ga wire .55 ohms on my SXK clone… and loving it!

1 Like
18

What wire are you using for that build ?

19

I finally and I mean finally got my KF4 up & running this morning ! Bottom pin wasn’t making contact prior.

image.jpeg1613×3040 710 KB

proud moment

KA1 28g ID 2.8 ohm 1.48 nice tight MTL hit.

@Kinnikinnick your wife may like this tank if she likes a tight draw. It’s pretty restricted although I do like it just getting use to it this am.

9 Likes
20

Geek Vapes

21

Yay you! :grinning: I’m glad to see you’re having success finding that M2L tank…it’s pretty too!

I was trying to pry a coupon code out of Gina1 with 3F Vape for ELR folks, but it seems as if they won’t budge. :pensive: I’ll probably get a V5 and mini V3 soon though…their prices are fairly low already. :smirk:

2 Likes
22

I got this one on clearance for 18$ at KanVape http://kanvape.com/collections/vaping-hot-deals/products/kayfun-lite-v4-rba-rebuildable-atomizer-tobeco-clone

I like KanVape they are nice ppl.
July10 for 10% off & all orders over 20$ ship free. Just got an email for this special.

1 Like
23

I mean what type of wire kanthal , SS , ni chrome

24

Oh haha sorry… Kanthal

1 Like
25

Amy that is no small accomplishment as many experienced builders found the Kayfun V4 to be one of the most difficult tanks to get working properly.

Kudos to you :thumbsup:

3 Likes
26

my 28g 2.5 id 9wraps 1.67 ohms. most difficult for a while to get working properly. just getting use to it this time.

2 Likes