Mouthpieces (AKA: Drip Tips)

I picked up a couple here… a few taller ones

http://www.ebay.com/usr/paxoticdriptips?_trksid=p2047675.l2559

This will prob not work for you but here is my solution to 510 size mouthpiece if yours is too hot try this:


its actually 2 cheap silicone drip tips put together, they cost $0.50 each at my local shop, should be cheaper at fastech

4 Likes

Never even thought they would fit inside each other like that. Those Grays and their probing… nice trick! I have a couple very short tips that I might be able to use again… thx

5 Likes

It’s so pretty…and glowy… :flushed:

4 Likes

Yeah it is…
@CosmicTruth is that soft rubbery silicone or the hard like a plastic shroud type?

The one that glows in the dark is soft silicone, the other one is almost as soft but rubber


the top one is cosmic fog brand drip tip

1 Like

I use those on my Crown cuz it has that problem. I like the metal tip that comes with it but it gets super hot. I have the ‘clear’ ones and the pink ones. :smiley:

1 Like

My solution to the crown was to cut the bottom of the glow silicone drip tip, then (with some difficulty) slide that over the stock crown tip

1 Like

Nice!! Never thought of trying that. I’ll have to give it a shot. :smiley:

1 Like

I had just order 11 new driptips from FT 2 weeks ago (just checked… still in China). Thanks for the link, I’ll order those up as well… now what else do I need? hmmm, I just can’t order 5 driptips (that’s why I bought 11 last time) lol
Just like I can’t buy 1 ingredient… there must be SOMETHING!

3 Likes

It’s difficult but can be done

Just buy 1 of each item :slight_smile:

i had a similar issue witht he crown so I used the silicon cover that comes with the spare coils works ok. Not as pretty as a glow in the dark.

3 Likes

LOL Yeah I couldn’t get it to work. I shredded two tips and a fingernail and gave up. :stuck_out_tongue: I saw one of those lying around and did the same. Definitely not as pretty, but better than burned lips.

4 Likes

I shredded one but the second one i pul on the tip then cut it with a razor blade which worked out ok

2 Likes

https://www.google.com/search?q=aspire+cleito+drip+tips&biw=1188&bih=550&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjxiNPQo6bQAhVIx1QKHcnHCuMQ_AUIBygC#imgrc=_

Take a look here and see if you can find what you’re looking for then just go to the website listed for the pic.

Thanks guys. I have one other question, is the Cielto tank considered “wide bore”?

Aspire - Aspire Cleito Tank
www.aspirecig.com/products/cleito/236.html
The Cleito is made of stainless steel (304) with a Pyrex glass tube and a wide bore Delrin drip tip, which is made of imported food grade Delrin. The Cleito is also

asked your question on google the highlighted text was the first reply

1 Like

Gearbest have also got a shed load of drip tips, not endorsing them or anything but I’ve just spent like $20 on a handful of really nice ones, I’m surprised no ones brought out a conical silicone universal drip tip that you could trim from either end to fit…?

In the brief look at the Clieto I’m not sure that just the tip comes off not having one i have been basing my repies on what I’m finding online.

Its the little Delrin tip that goes over the o-ring. Problem is …it’s on’y 1/2" and I dont like my lips on the tank. I’ve seen a couple online at 5/8" but they go INSIDE, hence reducing flow. The delrin tip comes off, I’m just trying to find on a little longer that goes OVER the chimney