ELR Home   Create recipe   Resource page   My recipes/favorites

Vapesourcing.com - The Latest Vape Devices & E-liquid


#21

Latest Joyetech Espion Infinite AI Kit-Voice Control Function Available

Hey guys. We’ve talked about the Joyetech Espion Infinite Kit before. Maybe you’ve been attracted to it. This time what I bring is the upgraded version of it - Joyetech Espion Infinite AI Kit. I was attracted by it at first glance, though it basically follows the design style of Espion Infinite, some new design elements are still incorporated. Now let’s learn more about it.

Espion Infinite AI Kit is a dual 21700/18650 powered, 200W max power output device, with a full temperature control suite, a basic voice response suite, and an adjustable LED light design on the front of the device. It also features a preheat function, allowing the user to control their vaping experience. The basic voice response suite allows users to change the light style, activate night mode, and call back time of day. The 0.96 Inch TFT screen shows the output temperature, output wattage, output voltage, resistance reading, dual battery life indicator, and output current.

As for The ProCore Conquer Tank, it is a redesigned model of the ProCore Air Plus, with the addition of a notched design around the device. It also comes with the new ProCD 0.15 ohm featuring a reticular coil design that provides huge clouds and excellent flavor. Anyway, the Espion Infinite AI Kit is an excellent starter kit with an alluring design that is both functional and visually appealing.

[Parameters]
Size: 49.5mm(L) x 33.0mm(W) x 140.50mm(H)
Screen resolution: 80*160 dpi
Output wattage: 1-200W
Max output current: 50A
Max output voltage: 9V
Output mode: Power/RTC/TC(Ni, Ti, SS316)/TCR(M1, M2, M3) modes
Resistance range: 0.05-1.5ohm for TC/TCR mode 0.05-3.5ohm for Power mode
Temperature range: 100-315°C/ 200-600°F
Battery using: 2 * high rate 21700/18650 cells (CDR25A)

Like it? Buy from the vape online shops now.


#22

What Advantages Does Vandy Vape Pulse V2 RDA Have?

Hey guys! In order to pursue good flavors, you need not only good mods, but also good atomizers, especially good RDAs. Today I’m gonna share two squonk RDAs which may meet your meet you need. Ok, here we go!

1. Vandy Vape Pulse V2 RDA


The RDA Vandy Vape Pulse V2 is 24mm like the Pulse 24 RDA, however, this time you get a raised deck.
You can use single or dual coil builds on the deck. The reason the deck is raised is for juice flow when squonking. When filling the RDA the liquid goes through the deck and feeds above the coils. The liquid returns below the deck. There are 3 airflow rings-you add these to suit your preference and according to whether you have single or dual coil builds.

For more details, just check the best online vape shops.

2. Vandy Vape Pulse X RDA


The RDA Vandy Vape Pulse X is the ultimate squonk dripper made in collaboration with Tony B., presenting a unique X-Shaped performance build deck, dual six-air slots angled airflow and specifically catering for squonk set-up. The Pulse X RDA measures 24mm in diameter and features a 2mm deep eJuice well and a special bottom-juice-return design, allowing for any excess to run down the one-way valve to recycle any excess. The X-Shaped build deck is quite dynamic, top-secured via Phillips screws and can support vertical or horizontal builds to accommodate a wide range of high-performance styles. The Vandy Vape Pulse X RDA package contains a Stainless Steel top cap and a frosted top cap along with 510 drip tip adapter for personal customization. The drilled metal top cap features set of six laser air slots on each side, aimed directly at the atomizer coils for maximum cloud and vapor production.


#23

Guys, today here comes a newest vape box mod kit - IJOY Shogun Univ Kit with built-in UNIV chipset, and it can be compatible with various coils. So do you want to know more details about IJOY Shogun Univ Kit? Let’s take a close look at this kit below.

IJOY Shogun Univ Kit consists of shogun univ mod and katana tank. IJOY shogun univ mod is a compact sized, dual 18650 mod that utilizes a stylish streamlined design highlighted by exquisite artistry and workmanship. The shogun univ mod can reach the beastly power of 180W output and integrates multiple vape modes including POWER, POD, PMODE, and TEMP modes for a very capable and versatile platform.

It’s compatible with dual high drain 18650 batteries for long-lasting vape life. It’s made of solid and textured materials and features beautiful double-sided resin panels in a variety of gorgeous color options for a high-end appearance and generous hand feeling.

The katana sub ohm tank utilizes a Slide-n-Fill top cap design and a 5.5ml capacity bubble glass (4.0ml standard glass included). Compatible with KM1, DM-M2 and DM-M3 mesh wire coils to bring you outstanding flavor.

Parameters
Size: 28 x 57.7mm
Capacity: 5.5ml (4ml extra glass tube included)
Coil: 1* KM1 Coil 0.15ohm (40-80W Pre-installed) / 1* DM-M2 Coil 0.15ohm (40-80W )

OBS Cube Mod Kit is a ergonomically designed vaping device with high-tech appearance. Its fire speed is super fast, only ten milliseconds. Compact as it is, it has a 3000mah built-in battery and can fire up to 80w max output. The Cube tank can contain 4ml e-liquid and features top filling system and bottom airflow system. With its intelligent protections, OBS Cube Kit will delivers you a safe and wonderful vaping experience.

Parameters
OBS Cube MOD
Size: 31 x 81.5mm
Max Wattage: 80W
Battery: Built-in 23600 battery with 3000mAh capacity
Working Mode: VW
Input: 5V 1.5A
Screen: 0.96 inches LED
Charging Time: 2-3 hours
Material: Zinc Alloy
Thread: 510

OBS Cube Tank
Size: 25.5 x 47mm
Capacity: 4ml
Coil: M1 0.2ohm mesh coil (30-80W, best at 35-70W)
M6 0.2ohm coil (40-80W, best at 50-70W)
Material: 304 Stainless Steel
Thread: 510


#24

Latest Laisimo COOKE Pod System Kit | Compact Buttonless Operation

For a long time, Laisimo company did not indulge its fans with novelties. This time they decided to start the AIO segment. So what we’re gonna see today is an AIO pod system kit called Laisimo COOKE. Now let’s take a close look.

Laisimo COOKE Kit is the first pod system device which is lightweight and portable by Laisimo Company. It is only 38g and the length is less than 10cm. You’ll feel the real lightness when you put it in your bag or pocket, so you can take it to anywhere and vape anytime. COOKE has built-in 450mAh battery which is durable enough for pod system devices, it can fire up from 1W to 8W power range to offer you stable and superior vaping.


There is no button on COOKE, the kit will be simply activated when you inhale. As for the ergonomically designed mouthpiece, it fits your mouth perfectly, giving you more convenience when vaping. Adopts a unique airflow system, this Laisimo COOKE Kit will produce massive cloud and you can discover more fun from every single puff.

[Parameters]
Dimensions: 75.4 x 45.5 x 11mm
Weight: 38g
Case material: plastic + metal
Power supply: built-in 450mAh
Cartridge capacity: 2ml
Evaporator resistance: 1.4Ω
Output power: 8W
Operating mode: POWER
Protection: low / high resistance, overheating, short circuit, overcharge / overdisc
Micro-USB port / charge: yes, charging current 1A

Like it? Buy from the vape online stores now.


#25

Crwon IV | Reuleaux Tinker, Which Is Better At Overall Performance?

Hey guys. This let’s make a comparison between two latest cheap vape kits on the market. Both of them come with cool looks and high performance. Ok, here we go!

1. UWELL Crown IV Kit


The Kit Uwell Crwon IV is the latest product with exquisite craftsmanship design and fashionable looking, which powered by dual 18650 batteries and can fire up to 200W maximum output. Equipped with the new generation of UWELL circuit board is more dust and corrosion resistant, the Crown 4/IV Kit support regular power mode and temperature control mode that can extend span life and protection. There is a fire button on the mod gives a sleek look and provides improved gripping. Holds up 6ml e-juice capacity, UWELL Crown 4/IV Tank with patented self-cleaning technology can absorb the e-juice and reduce leakage.
The Tank Crown IV utilizes UN1 Coil with 0.25ohm rated at 55W to 65W, and the UN2 Coil 0.23ohm with an output range 60W to 70W. What’s more, it compatible with the dual SS904L coil for your option. Top-filling design and adjustable bottom airflow system make it is easy to fill. Using Pro-FOCS Flavor Testing Technology bring great vaping experience with the satisfying flavor.

Tank Size: 28x 54.8 mm
Mod Size: 52.5 x25 x 84mm
Capacity: 5ml + 6mI(Bulb)
Material: Zinc Alloy & Stainless Steel & Glass & Silicone
Power Range: 5-200 W
Coil Specifications:
Dual SS904L Coil 0.2Oohm = 70-80W
Dual SS904L Coil 0.4ohm = 60-70W
UN1 Meshed Coil 0.25ohm=.55-65W
UN2 Meshed Coil 0.23ohm = 60-70W

2. Wismec Reuleaux Tinker Kit


The Kit WISMEC REULEAUX TINKER is inspired by a classic sports shoe, it consists of the REULEAUX TINKER Mod and the COLUMN Tank. The mod perfectly combines the vaping and high-tech to bring you incomparable vaping experiences. REULEAUX TINKER has an ergonomic design with striking lines, which reflects its sportsmanship. Powered by triple 18650 cells, REULEAUX TINKER can supply up to 300W output and the 0.96inch TFT color screen with upgraded user interface offers you more vivid and clearer vaping data. The newly developed COLUMN atomizer adopts powerful WL01 Single 0.15ohm coil with the large heating area, fully satisfying the vapers’ pursuit of dense flavor and massive cloud. In terms of appearance and performance, the REULEAUX TINKER with COLUMN will be a must-have setup for all vapers.

Size: 445678.3mm
Weight: 203.6g
Cell type: high-rate 18650 cell (discharging current should be above 25A)
Output wattage: 1-300W
Resistance range: 0.05-1.5ohm for TC modes 0.05-3.5ohm for VW mode
Temperature range: 100-315℃/200-600℉(TC modes)
Maximum charging current: 2A
Output voltage range: 0.5-8V
Diameter: 28mm
Height: 54mm
Weight: 60.2g
E-liquid capacity: 6.5ml/2ml


#26

Guys, do you need one RTA at present? This time I will recommend you one newest Vape RTA tank named Oumier Vape BOMBUS RTA with easy top filling, which can bring you enjoyable vaping experience.

Oumier Vape BOMBUS RTA features a unique adjustable airflow system and easy top refilling, it will bring you a safe yet optimal vaping experience. BOMBUS RTA is a 24.5mm diameter atomizer, witch has the capacity of 2ml, offering an easy way to enjoy your puff.

Parameters
Material: Stainless Steel+Pyrex Glass
Thread Type: 510
Single Coil, Bottom Air Flow RTA by Oumier Vape.
Top-Filling Tank
510 Thread

Joyetech Riftcore Solo RTA utilizes the famous RFCTM heater, which features longer lifespan than ever. With its coil-less design, you don’t need to replace coil again and again. The heater comes with self-cleaning function, you just need to replace the cotton regularly when flavor gets worse. The RFCTM heater takes a horizontal building way to achieve a pure and delicate flavor. The fast heat conduction enhances the vaping experience. The Riftcore Solo RTA adopts push-to-open top filling design, easy to refill and no leakage.

Parameters
Size: Φ26.0*46.5mm
Capacity: 3.5ml
Applicable with Joyetech RFCTM heater only
Resistance: 0.5ohm
Wattage: 25-35w (best at 30w)


#27

What Should We Notice When Using The VOOPOO REX Kit?

Hey guys. Today let’s take a look at the VOOPOO REX first. It is definitely an ergonomic device because of its special design. And there are also other features which may catch your heart. Just buy from the online vape shops if you like.

The REX Kit by VOOPOO features S-shaped body with curve-designed fire button for comfortable holding. Adopting the innovative GENE.FIT Chip which can block dust, liquid, and burnout, the VOOPOO REX 80W supports super fast firing speed and advanced TC/VW working modes. The REX works with single 18650 battery to provide 80W max output. Plus the magnetic battery room and fourth-generation 510 thread, the REX Mod is safe without electric leakage.


As for the UFORCE Tank, it is an innovative sub ohm tank utilizing the UFORCE N1 0.13ohm and UFORCE U2 0.4ohm dual coil. With 2ml/5ml capacity, bottom airflow and top & bottom filling system, the UFORCE can give you great simple vaping. Just get the VOOPOO REX Kit home.

[Parameters]
REX Mod
Dimensions: 38 x 24 x 88mm
Battery: Single 18650(Not included)
Power Range: 5-80W
Resistance range: 0.05-5.0ohm
Temperature Range:200-600℉/100-315℃
Resting Current: ≤10uA
Input Voltage: 0-40A
Output Voltage: 0-7.5V
Upgraded Function: Yes
Material: Zinc Alloy & PC
Thread: 510 thread

UFORCE Tank
Dimensions: 28 x 54.5mm(Standard Edition)/24.6 x 50.5mm(TPD Edition)
Capacity: 5ml(Standard Edition)/2ml(TPD Edition)
Coil: U2/U4/U6/U8/N1/N2/N3/P2(only for Standard Edition)/D4 Coils Compatible
Thread: 510 thread

Cheap vape juice perfect matched for VOOPOO REX: VGOD SaltNic Lushice E-Juice


#28

Guys, are you looking for vape box mod now? Today I will introduce you the newest vape mod - Hotcig G100 Mod with innovative chip for fast ignition, so do you want to know more details about this box mod below.

The Hotcig G100 Mod is right here for you! The G100 TC Box MOD works with single 18650/20700/21700 cell, firing up to a strong power of 100W output. The G100 MOD supports a fast firing speed of 0.5ms and the 0.9-inch display shows all data in a clear way. With the great TC/VW/Bypass modes, you will enjoy a fantastic vaping experience by using the Hotcig G100 MOD.

Parameters
Size: 34 x 31x 92mm
Battery type: 1 x 18650 / 20700 / 21700 cell (not included)
Material: Zinc Alloy
Coil Resistance Range: 0.1-3ohm
Output wattage: 5-100W
Output mode: VW/TC(Ni/Ti/TCR)/Bypass
Temperature range: 100-300°C/200-600°F
Thread: 510 Spring Loaded Connection

The VooPoo DRAG 157W TC Box Mod with Gene Chip inside is a dual 18650 powered mod compatible with the VooPoo PC App for full customization and fine tuning settings. The Gene Chip inside the DRAG offers a full temperature control suite with 157W max power and a firing speed of 0.025 seconds!

The VooPoo DRAG is a highly efficient variable wattage box mod with a chip efficiency rating of 95% for accurate and reliable power output. The chassis of the DRAG made from zinc alloy and has a carbon fiber accent panel on one side and the word DRAG lightly etched into the battery access door. The DRAG is compatible with the VooPoo PC App which allows the user to customize settings and add a customized logo to the display.

Parameters
Size: 905424mm
Working Voltage: 6.4-8.5V
Working Current:1-40A
Output Voltage Range:0-7.5V
Resistance range: 0.05-3.0 (VW); 0.05-1.5 (TC)
Output Power: 5-157W
Temperature Range:200-600F/100-315C
Supports 2pcs 18650 batteries ( not included )
Material: stainless steel


#29

Latest 4000mAh Vapor Beast-SMOK Stick V9 Max Kit

Hey guys. Has the Smok Stick V8 Kit ever caught your hearts? If yes, then the latest vape pen kit I’m gonna bring will surely surprise you again. The new kit is named Stick V9 Max, as the name shows, it’s a new upgraded version of Stick V8 series. Ok, let’s dive down for more information.

Smok Stick V9 Max Kit consists of built-in 4000mAh battery and Stick V9 Max tank, it is the latest pen-style vape with the largest battery capacity to date, the eye-catching outlook and excellent performance make it stand out among stick series. The unprecedented built-in 4000mAh battery will provide you with powerful and durable vaping experiences. With its large capacity, you can enjoy a longtime vaping; whats more, it will bring you a massive cloud of vapor. There is also an LED indicator to tell you the accurate conditions of itself. If pressing the Power Button twice in a row within one second, youll see the current battery power status. And three kinds of indicator colors on the lower part of the pentagon represent various battery levels. For instance, Green Light: above 70% battery power remaining, Orange Light: 30%-70% battery power remaining, and Red Light: below 30% battery power remaining. Besides, the LED indicator will flash 15 times when the voltage is lower than 3.3V.


As for the tank, it is the largest one ever designed by SMOK. Comes with a gigantic e-juice capacity of 8.5ml, its specially designed for Stick V9 Max. By adopting the custom-made Mini V2 S1 coil and Mini V2 S2 coil, it works at lower wattage but with intense clouds and flavor; Mini V2 S1 coil has mesh inside making a good balance of cloud and flavor, Mini V2 S2 coil has more restricted airflow, and it processes longer lifespan due to extra direct wicking channels. The specially made drip tip has a perfect diameter to fit your mouth, and it doesnt need to screw, only with simply press you can finish the install work. Without a doubt, it will bring increased airflow and provide more powerful draw effects. Holding Stick V9 Max in the hand, youre just the one who can conquer the giant!

Wanna try it? Buy from the online vape stores now.


#30

Guys, here comes a newest pod vape kit named Hava One Pod System Kit, which features a compact profile and comfortable texture, adopting high-density zinc alloy material. There are more features about this all-in-one metal vape pod system kit below.

With 2.85mm intake width, Hava One Pod System Kit ensures the optimal amount of air mixes with the e-liquid, allowing you to enjoy huge clouds, strong flavor and immediate vaping experience. Its refillable 2 ml pod hidden in the magnetic front cover allows you to easily refill e-liquids or replace a pod. HAVA ONE boasts 3 power output modes, you are not restricted to only one vapor taste. Easy to use and with dense clouds and natural taste, HAVA ONE completely fulfills your vaping needs.

Parameters
Pod Size: 0.96 × 0.89 × 0.4 in (24.5 × 22.5 × 10.2 mm)
Size: 3.64 × 1.42 × 0.55 in (92.5 × 36 × 14 mm)
Battery Capacity: 350 mAh (Built-in)
Input Voltage: 3 Optional Power Output Modes
Charging Time: 90 mins
Charging Current: 200-400 mAh
Pod Capacity: 2 ml
Pod Material: Food Grade Plastic
Coil Type: Ceramic Coil
Coil Resistance: 1.2 Ω
Cover Material: Stainless Iron + UV Varnishing
Rim Material: Zinc Alloy + UV Varnishing

The Eleaf iCare 2 Pod Kit features an exquisite rubber paint finish, giving you a softer and smoother feel in hand than ever. Equipped with a removable 2ml tank and an internal 650mAh battery, the iCare 2 is another ultra compact e cigarette starter kit. The tank can be refilled with ease simply by removing the mouthpiece. To activate the device simply press the button and vapor will be produced instantaneously. The intuitive four color LEDs are for ease of checking battery status. By using a higher strength e-liquid, the iCare 2 with its new IC 1.3ohm Head perfectly recreates the sensation you are accustomed to.

Parameters
E-juice Capacity: 2ML
Size: 31mm x 13mm x 86mm
Battery capacity: 650mAh
Maximum output wattage: 15W
Resistance range: 0.6-3.0ohm


#31

Good news! You must love the Wismec Reuleaux Tinker Kit, and now the Wismec Reuleaux Tinker Kit are in stock now, so do you want one? First order, first get. This is the best vape starter kit designed for you with charming appearance.


#32

A Perfect RDA Match For 100W Asmodus Amighty TC Mod

Hey guys. Recently the Asmodus Amighty is becoming popular, but many people don’t know which RDA atomizer can match well with the mod. So I searched some online shops and finally found the Geekvape BARON. If you’re planning to get some new devices, I think they are very suitable. Ok, let’s check for more details.

1. Geekvape BARON RDA


The BARON RDA by Geekvape is an innovative rebuildable dripping atomizer, coming with a 24mm dual post deck with the flathead screws on top for easy dual coil building. Plus the unique inner barrier with long stripes airholes and mesh type airholes, the Baron RDA can control airflow system accurately. The Baron RDA is also compatible with Squonk mods by Bottom Feeder Pin. Moreover, the one-piece airflow cap can ensure airflows in the correct position and prevent leakage. Just take the exquisite RDA home.

[Parameters]
Size: 24(D) x 28.8mm
Type: Dual Coils RDA
Juice Well Depth: 6mm
Drip Tip: 810/510(with adapter)
Thread: 510 thread(BF Pin included)

Like it? Just buy from the vape shops online now.

2. Asmodus Amighty Mod


The Amighty Mod by Asmodus is an ergonomically designed box mod, featuring firing at wattages up to 100W, utilization of the GX100-UTC Chipset, and a touch screen operation for a highly advanced box mod that pairs nicely with most atomizers available on the market. The asMODus Amighty box mod is a single battery mod using a single high-amp 21700 or 20700 cell battery or a single 18650 cell battery with the included adapter to allow the Amighty to achieve its reputed 100W maximum. In addition, the battery cells power the proprietary GX100-UTC chipset within, opening up a comprehensive temperature control suite that accommodates the entire span of wire material options. The GX100-UTC chipset also allows for varying taste settings on how fast the coil heats up, entertaining soft, normal, and hard settings to allow the user to configure the desired vaping output. In addition, the display screen is touch sensitive and can be utilized to change the firing settings and other various settings, without the need for adjustment buttons.

[Parameters]
Dimensions - 87.5mm by 52mm by 31mm
Single High-Amp 21700/20700 Battery - Not Included
Single High-Amp 18650 Battery - Adapter, Optional
Wattage Output Range - Power Mode: 5-100W
Wattage Output Range - TC Mode: 5-60W
Maximum Voltage Output: 7.5V
Atomizer Resistance Range: 0.1-3.0ohm
Temperature Control Range: 212-572°F / 100-300°C


#33

Guys, today let me recommend you the newest AIO vape kits - GeekVape Flint MTL Kit with quick slide fill system for convenience, and now let’s see more features about this vape kit below.

GeekVape Flint Kit is an all in one portable device which use for Nicotine salt. Powered by built-in 950mAh battery, features available output mode for personal preference, simply press the firing button three times to switch between modes to optimize flavor and vapor production.

The Flint Tank comes with five different airflow size, the adjustable MTL airflow with perfect restrictions. What’s more, the multiple safety protections will brings a clean flavor and longer lifespan. The special coil and top filling system will bring a best flavour possible. 4 colors for you to choose.

Parameters
Size: 93.95* 22mm
Battery Capacity: 950mAh
Filling: Top filling
Thread: 510 thread

Order one now: https://vapesourcing.com/geekvape-flint-kit.html.


#34

Latest Smok SLM Kit-Extremely Slim Body But Thick Vapor

Hey guys. Have you already been attracted by the unprecedented Stick V9 Max? This time I’m gonna bring you a pen-style pod kit named SMOK SLM. As the name shows, it comes with extremely slim and light body which make it convenient to hold and carry. Now let’s learn more about details.


SMOK SLM Kit is powered by a built-in 250mAh battery which can fire up to 16w. Equipped with an intelligent LED indicator, it’ll show the battery status clearly. Features the air-activated design, you can enjoy the puffs without any buttons. The cartridge has a capacity of 0.8ml, which is a decent amount to really indulge in flavors of vape juice. It combines the advantages of traditional cigarettes and advanced air-driven technology, which makes you easily enjoy thick vapor and avoid leakage. As for me, it’s really worth buying.

Vape juice perfect matched for SMOK SLM: Naked 100 Salt Hawaiian Pog


#35

Guys, here comes the newest vape starter kit - Kanger Ranger Kit, which comes with a compact size body, ergonomic shape, giving you a smooth hand feeling. Powered by dual 18650 batteries and it can run up to 200W maximum output.

Kanger Ranger Kit has a large OLED display that you can easy to operation and it also supports variable voltage, variable wattage, and temperature control. The unique custom modes provide you with a wide series of vaping options. As for the Ranger Tank, this tank is made of aluminum alloy. It comes with 3.8ml e-jucie capacity. It is compatible with Milli Mesh Coil and Milli Coil (NiCr 0.4ohm) for the purest flavor.

Parameters
Size: 28.5mm *48mm *83mm
Power Range: 5-200W
Battery type: 2 * 18650 Batteries (not include)
E-juice capacity: 3.8ML
Display: With OLED Display
Resistance: 0.05 - 3.0Ω Coil
Temperature: 100℃ - 315℃
Output Modes: VW/TC NI/TC TI/TC SS/M1/M2
Charging: Micro-USB, DC 5V/2A
Thread: 510

Purchase one now: https://vapesourcing.com/kanger-ranger-kit.html.


#36

Two Classical Voice Control Kits-SMOK I-PRIV & IJOY Avenger 270

Hey guys. Good day!

With the development of technology, the voice control function is becoming more and more popular in vape devices. Cause it’s not only very cool but also frees our hands, making vaping more comfortable. Many vapers want such a device, but sometimes they’re not sure how to choose. So this time I’m gonna introduce two vape kits for options.

1. SMOK I-PRIV Kit


When a mod comes with AI, what will happen? The SMOK I PRIV Kit will show you! It can clearly hear you, respond you and execute your commands. The mod shaped like a warrior, full of muscles, combining with 1-230W output power, it can guarantee powerful vaping effects. From its round TFT screen, you can see a newly designed dynamic user interface. And the ergonomically designed lateral fire key is extremely convenient to operate. There’s also a LED light at the bottom, you can set to see a flickering light. It’s equipped with TFV12 Prince tank, which has revolutionary strip coil and 8ml capacity. Besides, this mod is compatible with 21700, 20700 and 18650 battery. Advanced technology, multiple functions, your warrior is coming!

It’s available in the online e cigarette shops if you like.

2. IJOY Avenger 270 Kit


The Avenger 270 Kit by IJOY epitomizes the technological advances in the industry, featuring a dual 20700 platform capable of Voice Control System with futuristic design elements to pair with the Avenger Sub-Ohm Tank. Creatively crafted with modernization in-mind, the Avenger 270 234W Box Mod implements futuristic lines and a large RGB firing bar with intuitive LED Light-Up functionality. The utilization of dual 20700 batteries (sold separately) provides the combination of range and flexibility to create a longer lasting output technology with optional support for 18650 batteries for added versatility. The crowning achievement lies within the Voice Control System, allowing users to make adjustment with the device through a voice recognition mechanism. The Avenger 234W features a maximum output rating of 234W with comprehensive temperature control mode with effective fine-tuning adjustments as well as Unique Custom User Mode. The new Avenger Sub-Ohm Tank integrates a high-end 25mm chassis design with dual bottom airflow system and improving the X3 Coil System with innovative wood pulp materials and mesh designs. The 0.15ohm X3-Mesh is made with mesh design wand a centralized core made from wood pulp and cotton. Meanwhile, the X3-C1S retains similar material construction within a traditional coil design.


#37

Today I recommend you one best seller box mod vape - Vsticking VK530 Mod, painted with graffiti, and now many vapers are attracted by its high performance and charming cool appearance.

Vsticking VK530 200W TC Box Mod is a dual 18650 200W(max) Box Mod equipped with a watch-like TFT IPS HD screen. It’s a dual 18650 vape device with 5-200W output range, supporting VW, Temp, TCR, Joule and Flavor Modes and having customized wallpapers for options. Above the screen is the power button, while under the screen stands the joystick, thus it’s controlled through two buttons. Powered by YiHi SX530 chip, VK530 plays high performance under various modes, and multiple protections are added.

Parameters
Battery type: 2* 18650 Batteries(Not Included)
Wattage Output Range: 1-200W
Display: 1.3" TFT IPS HD Screen
Maximum Voltage Output: 7.5V
Maximum Joule Output: 10-120J
Temperature Range: 212-572°F/100°-300°C

Vandy Vape Pulse 80W box mod has a cool and colorful appearance. The fast, stable and safe built-in chip will give you a better experience. Variable Wattage and Temperature Control modes is a unique design, you can gain better use effect through it. Besides, the BF bottle is used to feeding e-juice for a supplementary e-juice bottle.

Parameters
Size: 5425.982mm
Max Wattage: 80W
Connection Threading: 510


#38

OUMIER Rudder Mod-Pointing In The Right Direction To Vaping

Hey guys. This time I’m gonna introduce a latest vape box mod from Oumier named Rudder. And I hope it’ll steer you in the right direction to vaping. Ok, fasten your seatbelts, here we go!

The Oumier Rudder Mod is a new release from Oumier who generally make great atomizers such as the Wasp Nano RDTA and the well-loved VLS RDA. It will output up to 200W and requires 2×18650 batteries which are not included in the kit. The front of the mod houses the large OLED colour screen and the fire button. Below the screen is a “knob” which is your adjustment dial-turn this to make adjustments. There are Carbon fiber (or “Style”) grip panels on either side of the mod. The rear of the mod pulls off for access to the batteries. The 510 connector is central on the top of the mod and being 31mm wide you should be able to fit most atomizers on there without overhang. You have various user modes to choose from – Variable Wattage, Temperature Control (Ni, Ti, SS) and Bypass plus you can lock the dial and choose colour display options. There are 4 colours to choose from – Blue & Purple Shades, Brushed Silver, Red, and Black.


[Parameters]
Size: 44 x 31 x 88mm
Output: 200W max
Battery: 2×18650 (not included)
Resistance range: 0.05-3ohm
Temperature range: 100-300°C / 200-600°F
Modes: VW /TC – SS, Ni, Ti, Bypass, Colour Selection, Lock, Knob off
Display : OLED
Rotating adjustment button

Wanna have try? Get it here:https://vapesourcing.com/oumier-rudder-mod.html


#39

Guys, do you like the latest GeekVape Flint MTL Kit? Order the GeekVape Flint Kit, you must also need Geekvape NS Coil together for this perfect kit. This is some introduction about GeekVape Flint Replacement NS Coil below.

The GeekVape Flint Replacement NS Coil is constructed from N80 heating material and food grade organic cotton, with 1.6ohm resistance. It features pure and clean flavor, high delivery of nicotine, longer lifespan and efficient wick to prevent dry hits. It is great for Nic salt liquid.

Parameters
Resistance: 0.16ohm
Quantity: 5pcs/pack
Fit for: Geekvape Flint Kit


#40

$10.9 VOOPOO UFORCE Replacement Coils(5pcs/pack) In Stock-10 Devices Compatible

Hey guys! The $10.9 VOOPOO UFORCE Replacement Coils (5pcs/pack) are in stock now. Just choose the right one for yourselves.
Apply to:
VOOPOO Drag 2 Kit 177W
VOOPOO Drag Mini Kit 117W
VOOPOO TOO Kit 180W
VOOPOO Caliber Kit 110W
VOOPOO VMATE Kit 200W
VOOPOO TOO Resin Kit 180W
VOOPOO BLACK DRAG Kit 157W
VOOPOO MOJO Kit 88W
VOOPOO UFORCE Tank
VOOPOO UFORCE T1 Tank

Where to buy: https://vapesourcing.com/voopoo-uforce-replacement-coils.html