Yocan Hive 2.0 just released recently,for this all-in-one mod kit for Juice&Concentrate,many people may don’t know how to use it.
Today i’m going to tell you how to use the Hive 2.0.
How to fill/load your device ?
To fill the juice atomizer,unscrew the mouthpiece,take your syringe or juice vape refill bottle,tilt an angle along the side of the glass and squeeze out the juice (Do Not fill exceed 0.8ml).
To load the concentrated atomizer,unscrew the atomizer tube,using your dab tool to put your desired concentrates on the quartz coil.
Reattach the mouthpiece/atomizer tube by screwing it on when it is filled/loaded. Then insert the atomizer in the mod.
How to know the Hive 2.0 is on ?
As many other devices,click the power button 5 times quickly to turn on the Hive 2.0,then the 3 blue lights will flash 3 times in the meantime. That means your device is on.
How to adjust the voltage level ?
As you know Hive 2.0 has a new function,it’s voltage adjustable. The outpout voltage can be adjusted for different occasions,press the power button 3 times rapidly can adjust the voltage level.Only 1 light shows blue means it’s low voltage,2 light shows blue means middle voltage,3 light shows blue means high voltage. When your device is middle voltage,press the power button 3 times to switch it to high voltage,then press button 3 times again the voltage will turn to low voltage.
Hold the power button and enjoy vaping after adjust to your desired voltage level.
How to know your device needs to be charged ?
The Hive 2.0 battery capacity is 650mAh,when the 3 blue lights flash 10 times at the same time,it’s time to charge the battery.
When it’s on charging,the 3 bule lights will flash in loop. If the battery charged to 35%,the first blue light stay on,and the other two lights keep flashing in loop.
When it’s charged to 70% the first light and second light stay blue,the last light keep flashing.
When it’s full charged,the all 3 blue lights will flash 8 times in the same time,and then the lights go out.
How long can it work at one time ?
The Hive 2.0 supports 15 seconds continuous heating. If you suck it over 15 seconds at one time,the voltage indicator lights will flash 8 times,then the vape function will be disable this time.
Now do you know how to use the Hive 2.0 ? It’s important to know the indicator light,that will help you to use it better.
If you have any other question please feel free to contact us. We’re always here to help you.
Thanks for your support to Yocan and enjoy vaping!