ATVS Selene Pod Starter Kit 300mAh
Product introduction
The ATVS Selene Pod Starter Kit, with 300mAh internal battery and 1.0ml pod capacity, is a slim and elegant kit that utilizes ceramic heating coil and features temperature control technology. Also, it only takes a short time of 50 minutes to fully charge the Selene Pod Kit.
Parameters:
Size: 100x 19x 11mm
Pod capacity: 1.0ml
Ceramic heating coil
300mAh built-in battery
Charging time: 50 minutes
Battery life: 400 cycles
Output power: 10- 12W
Features:
-Small yet elegant
-Temperature control technology
-LED indicator for showing voltage
(Red light: Under 3.5V)
(Blue light: 3.5- 3.7V)
(Green light: 3.7- 4.2V)
Package includes:
1x Selene Pod Starter Kit
1x USB Cable
1x User Manual
STARSS Bravo Pod System Kit 1000mAh
Product introduction
The Starss Bravo, with 1000mAh built-in battery and 2.0ml juice capacity, is an ultra portable stylish pod system kit that has long duration and supports maximum output power of 15W. The Bravo pod device features the intuitive refillable Bravo Cartridge System that allows users to utilize up to 2.0ml of salt-based nicotine e-liquids or regular e-liquids with three output modes (low, middle and high), that shall be indicated by two RGB light by green, blue and red.
Parameters:
Size: 86.8x 39.3x 16.9mm
Cartridge material: PCTG
Main body material: Zinc alloy
Mesh coil: 0.8ohm, 15W
Charging current: 1A
Power range: 7- 15W
Cartridge capacity: 2.0ml
Charging port: Micro USB
Battery capacity: 1000mAh
Ceramic coil: 1.4ohm, 10W (pre-installed)
Operating voltage range: 3.0～3.5V
Features:
-Durable battery: produce massive clouds
-3 adjustable output: meet different needs
-Ceramic coil: fresh flavor without burning
-Unique design with high quality metal decoration
Package includes:
1x Starss Bravo Device
1x Refillable Cartridge 2.0ml
1x Micro USB Cable
1x User Manual
Joyetech Exceed Grip Starter Kit 1000mAh
Product introduction
Joyetech Exceed Grip Starter Kit, an upgraded version of the Joyetech Exceed, is powered by an internal 1000mAh battery to bring you durable and stable vaping experience with 20W max output. Apart from the intelligent variable voltage output, the Exceed Grip Starter Kit also features with innovative dry burning protection. Included are 2 types of cartridge, a 4.5ml standard cartridge with a pre-installed 0.4ohm EX-M coil and a 3.5ml pod cartridge with an integrate 0.8ohm mesh coil.
Parameters:
Size: 40x 21x 74mm
1000mAh built-in battery
Output wattage: max 20W
Output mode: variable voltage output
Standard cartridge: 4.5ml, EX-M 0.4ohm coil (changeable)
Pod cartridge: 3.5ml, 0.8ohm integrate mesh coil (fixed)
Features:
-Easy to refill
-Innovative dry burning protection
-Intelligent variable voltage output
-3.5ml pod cartridge with an integrate 0.8ohm mesh coil
-4.5ml standard cartridge with a pre-installed 0.4ohm EX-M coil
Package includes:
1x Exceed Grip Battery
1x Standard Cartridge 4.5ml
(EX-M Coil Pre-installed)
1x Pod Cartridge 3.5ml
(Integrate 0.8ohm Mesh Coil, Fixed)
1x Spare EX-M 0.4ohm Mesh Coil
1x USB Cable
1x User Manual
1x Warranty Card
Geekvape Frenzy Pod Kit 950mAh (As Micro Chipset)
Product introduction
Geekvape Frenzy Pod Kit, with 2.0ml juice capacity and 950mAh in-built battery, is designed with pure elegance and beautifully crafted with zinc alloy & Resin, making every single piece a unique masterpiece. Equipped with the most advanced AS Micro chipset, the Frenzy will provide vapers with stable vaping experience. Also, it’s compatible with the replaceable NS coil system.
Parameters:
Pod capacity: 2.0ml
Size: 86.1x 37x 15.7mm
Battery capacity: 950mAh
PCBA temp alarm: 80℃
Working temp: -10- 45℃
Charging time: 45minutes
Coil resistance: 0.7- 3.0ohm
Charging specification: 5V/ 1A
Maximum output duration: 10s
Maximum output voltage: 4.2V
Low voltage warning: 3.3V±0.1V
Standby current: Less than 10uA
Features:
-Convenient airflow adjustment
-Equipped with most advanced AS Micro chip
-Magnetic connection pod for quick accessibility
-Easy access bottom-refill with leakage free technology
-Precise temp control to avoid dry heat (420℉/ 440℉/ 460℉)
-Battery life indicator (Red: 0-30%, Blue: 31- 69%, Green: 70- 100%)
Package includes:
1x Frenzy Pod Kit
(0.7ohm NS Mesh Coil Pre-installed)
1x 1.2ohm NS Coil
1x USB Cable
1x User Manual
OBS KFB2 AIO Starter Kit 1500mAh (MTL & DL)
Product introduction
OBS KFB2 Starter Kit, an upgraded version of the OBS KFB AIO Kit, features unique appearance with colorful patterns. Powered by an internal 1500mAh A+ level battery with low power output and constant voltage at 3.5V, the OBS KFB2 will bring you stable vaping experience with multiple intelligent protections.
As for the KFB2 atomizer, it has 2.0ml e-juice capacity with slide top refill design. Its’ bottom airflow system can support both MTL and DL vaping. Plus the advanced S1 mesh coil and N1 coil, the OBS KFB2 is perfectly compatible with regular e-liquid vaping and nicotine salt vaping.
Parameters:
Size: 20x 112mm
Tank capacity: 2.0ml
510 thread connection
1500mAh internal A+ level battery
Coil: 1.2ohm N1 coil(best for nicotine salt)
Pre-installed: 0.6ohm S1 mesh coil
(best for e-liquid or low concentration nic salt)
Features:
-One button for simple operation
-Multiple intelligent protections
-Slide top filling with 2ml capacity
-Advanced S1 mesh coil and N1 coil
-Bottom airflow for MTL and DL vaping
-Exquisite AIO Kit with colorful patterns
Package includes:
1x OBS KFB2 AIO Kit
1x S1 Mesh Coil(Pre-installed)
1x N1 Coil
1x USB Cable
1x Extra Glass Tube
1x User Manual
Artery Baton Kit with Hive S Tank
Product introduction
The Artery Baton Kit, combined of an Artery Baton Mod and a Hive S Tank, supports 3 battery types: 18650, 20700 and 21700. Constructed of brass and aluminum alloy, the kit is comfortable to grip with. Besides, the tank is equipped with 0.3ohm coil (30- 50W) for satisfying vape. And the Artery Hive S Tank comes with 2.0ml/3.0ml e-juice capacity, featuring the unique mesh coil for great flavor and huge clouds.
Parameters:
Artery Baton Mod
Dimension: 27x 93.15mm
510 thread connection
Material: Brass, Aluminum alloy
Resistance range: 0.1- 3.0ohm
Output voltage: 3.0V- 4.2V
Battery capacity: External battery(≥20A)
Battery: Single 21700 /20700/18650 (Not included)
Hive S Tank
Dimension: 24.5x 39.8mm (2.0ml);
27x 39.8mm (3.0ml, with an extra bubble tube)
Coil resistance: 0.3ohm±0.03ohm
Material: SUS, Aluminum alloy
Filling way: Top filling
Features:
-Outstanding mesh coil for great flavor
-Portable semi-mechanical vape pen kit with one button design
-Powered by single 21700/20700/18650 battery
-Easy top filling and adjustable bottom airflow
Package includes:
1x Artery Baton Mod
1x Hive S Tank
1x Replacement Glass Tube
1x A Pack of O-rings
2x User Manual
1x Warranty Card
1x Certification Card
Dovpo Nickel 230W TC Box Mod (Modes: VW/ TC/ Preheat)
Product introduction
The Dovpo Nickel Mod, powered by dual 18650 batteries with 230W max output, is a high-performance vaping platform that features a durable Zinc Alloy w/ PC binding construction, high output capabilities, and a fully equipped user control suite. User control suite features Temperature Control Mode (accommodating Ti, Ni, and SS heating elements, and TCR. Preheating Mode (Soft, Normal, Hard) also featured.
Parameters:
Material: Zinc alloy
Size: 90.6x 56.6x 28mm
Power range: 10- 230W
Temp range: 100- 310℃/ 200- 600℉
0.96 inch TFT color screen
Output voltage: 1.0- 7.5V
Powered by dual 18650 batteries (Not included)
Features:
-230W max output with dual 18650 battery
-Full Zinc body with PC material on both sides
-Variable options of normal, soft, hard and user preheat for choose
-Wattage mode, Titanium, Nickel, Stainless Steel and TCR in Temperature Control Mode
Package includes:
1x Dovpo Nickel Mod
1x USB Cable
1x User Manual
Rincoe Mechman Mesh TC Kit 228W (Dual 18650 & Mesh Coil)
Product introduction
Rincoe Mechman Mesh Kit is combined of a Mechman Box Mod and a Mechman Mesh Tank. The Mechman Mod, powered by dual external 18650 batteries,is able to reach up to a maximum output power of 228W with TC/ VW and Bypass modes. Constructed of zinc alloy & leather, it’s comfortable to hold in hand. As for the Mechman Mesh Tank, it features 4.5ml juice capacity, utilizes single/ dual mesh coils for optimal flavor. In general, the unique and ergonomic design makes the whole kit attractive and outstanding in the market.
Parameters:
Mechman Box Mod
Size: 53.8x 29.2x 90mm
Output: 1- 228W
Charging: 5V/2A
Max output current: 50A
Max output voltage: 8V
Input voltage: 6- 8.4V
Screen: 0.96 inch display
Material: Zinc alloy & leather
Temperature range: 200- 600℉/ 100- 315℃
Powered by dual 18650 batteries (Not included)
Resistance range: 0.05-3.5ohm (TC/ TCR modes), 0.08- 5ohm (VW/ Bypass modes)
Mechman Mesh Tank
Size: 28x 36mm
Capacity: 4.5ml
810 drip tip
510 thread connection
Material: SS & quartz bubble glass & resin drip tip
Resistance: 0.25ohm single mesh coil (40- 60W)
0.2ohm dual mesh coil(50- 80W)
Features:
-Easy top refill design
-Adjustable bottom airflow
-Single/ dual mesh coils for optimal flavor
-Compact high power kit with excellent appearance
-Reverse battery protection, Over-heating protection
-Equipped with 0.96 inch screen to show vaping detail
-Low voltage protection, Overload/ short-circuit protection
Package includes:
1x Mechman Box Mod
1x Mechman Mesh Tank
(0.25ohm Single Mesh Coil)
1x Extra Dual Mesh Coil 0.2ohm
1x Extra Bubble Glass Tube
1x Certificate Card
1x Warning Card
1x USB Cable
1x Accessory
1x User Manual
VOOPOO Drag Nano Pod Kit 750mAh (GENE Chip Born for Flavor)
Product introduction
Drag Nano Pod Kit, the first pod system kit from Voopoo family is consisted of a 750mAh internal battery and a 1.0ml refillable pod with pocket-friendly size with beautiful resin panel. What’s more, the Drag Nano Pod kit inherits the classic and advanced GENE pod chip which is born for best flavor. Plus the brand-new 1.8ohm coil, the DRAG Nano is optimized for nic-salts e-juice.
Parameters:
Battery size: 54.5x 35x 11mm
Pod size: 36.3x 15x 7.0mm
750mAh internal battery
Pod capacity: 1.0ml
Coil resistance: 1.8ohm
Quiescent current: ＜15uA
Charge voltage: 5V/ 0.5A
Output voltage: 3.2- 4.2V
Resistance range: 1.5- 3.0ohm
Battery material: Zinc alloy & aluminium alloy
Features:
-Smart Indicator Light
-Various Safety Protection
-Patented Refilling Design
-Multiple Colors for Selection
-GENE Chip Inside Born for Flavor
-New 1.8ohm Coil Optimized for Nic-salts
-Portable Size with Beautiful Resin Panel
-750mAh Recharge battery for long-last vaping
Package includes:
1x Drag Nano Battery
1x Pod-S1 (1.8ohm)
1x USB Cable
1x User Manual
1x Warranty Card
1x GENE CHIP Card
Oumier x VapnFagan Bulk RTA 6.5ml
Product introduction
The Bulk RTA, a collaboration between Oumier and the Youtube reviewer VapnFagan, is a rebuildable tank atomizer with 6.5ml large juice capacity and features post-less deck for easy dual coils building. The Oumier Bulk also features a unique adjustable bottom airflow system, which will bring you huge cloud and excellent flavor without leakage.
Parameters:
Size: 28x 39.7mm
Capacity: 6.5ml
Type: Dual coils RTA
510 thread connection
Features:
-Easy dual coils building
-Designed by Oumier & VapnFagan
-Unique adjustable bottom airflow system
-Leak-proof structure with top filling design
Package includes:
1x Oumier Bulk RTA 6.5ml
2x Shoelace Cotton
2x Tricore Fused Clapton Coil
1x Glass
1x Spare Kit
1x Extra Drip Tip
Moti Vape Pod System Kit 500mAh (Honeycomb Ceramic coil)
Product introduction
Moti Vape Pod System Kit, with 500mAh internal battery and 1.8ml juice capacity, adopts Meta Tech heating technology to offer stable and excellent flavor while preventing from being burnt. Moreover, it only takes a short time of 50 minutes to fully charge the Moti battery.
Parameters:
Size: 11.4x 19x 91.5mm
Pod capacity: 1.8ml
Charging time: 50min
500mAh built-in battery
Resistance range: 1.2- 1.5ohm
Features:
-Magnetic design
-Leakage free cartridge
-Adopts Meta Tech heating technology
-Sixth Generation Honeycomb Ceramic coil
-Available Ports in Full Power State: 600 Puffs
-Number of available ports per cartridge: 650 - 800 Puffs
Package includes:
1x Moti Pod device
1x Pod Cartridge
1x User Manual
1x USB Cable
Vivismoke Leather Pocket Case for Pod Kit $4.15
Product introduction
Vivismoke Leather Pocket Case, made of eco-friendly fiber leather, is a ultra-thin and slim fit pocket case that specially designed for carrying pod kits and replacement pods. The leather pocket case features with creative stretch-pulling design, which enables easy usage.
Parameters:
Size: 120x 10x 85mm
Material: Eco-friendly fiber leather
Features:
-Extra slot for cash/ card/ pod/ charger
-Creative stretch-pulling design, easy to use
-Organize and store up 1 pod devices, 2 extra pods
-Magnets secure the closure, keeps pod devices safely in place
-Premium composite leather exterior and soft microfiber interior
-Ultra-thin,Slim fit, light weight, ideal for travel & outdoors
Package includes:
1x Vivismoke Leather Pocket Case
Asmodus Minikin 3S 200W Kit (New GX-200-UTC chipset)
Product introduction
Asmodus Minikin 3S Kit, including a Minikin 3S Mod and a Viento Tank, is powered by dual 18650 batteries with 200W maximum output power. The Minikin 3s features a fingerprint sensor, an aesthetically pleasing carbon fiber strip as well as wireless charging capabilities.
On top of the meticulously crafted comfortable exterior lies the all new GX-200-UTC chipset, the most advanced Asmodus board yet. The chip offers the most accurate temperature control mechanics to date with full support for Ni200 Nickel, Ti Titanium, SS316, SS317, and SS304 with fully adjustable TCR and TFR functionality right out of the box.
As for the Viento Sub Ohm Tank, it takes a beating that is comprised of premium stainless steel and pyrex glass and offers enhanced durability in the form of a stainless steel ring that is doubles as an accent as well as an impact protector for the glass section of the tank.
Parameters:
Minikin 3S Mod
Zinc alloy construction
510 thread connection
Advanced GX-200-UTC Chipset
Temp range: 212- 572℉/ 100- 300℃
Atomizer resistance range: 0.1- 3.0Ω
Power output range: 5- 200W (VW/ Curve Mode)
5- 120W (Temp Control Mode)
User programmable wattage curve mode
Adjustable TCR and TFR functionality
Powered by dual 18650 batteries (Not included)
Temperature control presets for Ni200, Titanium, SS316, SS317, and SS304
Viento Tank
26.9mm diameter
4.0ml juice capacity
510 thread connection
SS & pyrex construction
Removable protective ring
Features:
-Upgrade-able Firmware Support
-Low-Resistance & ESD Protection
-Haptic Feedback Indicates Error Message
-Integrated Fingerprint Sensor & Accelerometer
-USB Type-C Firmware Upgrade and Charging Port
-Crisp High Definition Full-Color Touchscreen
-Reverse Polarity & Short-Circuit Protection
-Low-Voltage & High-Resistance Protection
-Over-Charge, Overheat & Overtime Protection
-Sliding Hinged Top Fill Mechanism
-Compatible with Smok Baby Beast Coil Heads
-Snakeskin Patterned Wide Bore 810 Delrin Drip Tip
Package includes:
1x Minikin 3S Box Mod
1x Viento Sub Ohm Tank
1x 0.2ohm Mesh Coil
1x Replacement Glass
1x Spare Parts Bag
1x USB Type-C cable
1x Battery Warning Card
1x User Manual
Engeston Hela II 200W RDTA Kit (Dual 18650 & Dual Coils)
Product introduction
The Engeston Hela II RDTA Kit, combined of the Hela II Mod and an RDTA, is powered by dual 18650 batteries with a maximum output power of 200W. Equipped with a 0.96 inch OLED screen, the Hela II Mod will simply showcase all the vaping details. As for the included RDTA, it supports both single and dual coils building to meet different needs.
Parameters:
Size: 82x 43x 37.41mm
Output: 5- 200W
0.96 inch OLED screen
Charging: DC 5V/1.5A
Max Current range: 50A
Output voltage: 6.4- 8.4V
Single/ dual coils configuration
Temperature rang: 100- 315°C/200- 600°F
Powered by dual 18650 batteries (Not included)
Support coil types: Kanthal, Ni200, Ti01, SS316 etc.
Resistance: 0.06 - 3ohm (Power mode),
0.06- 0.5ohm (Ni200), 0.06-1ohm (Ti01 & SS)
Features:
-Support VW/TCR modes
-0.96 inch screen, displaying vaping details
-Unique appearance for good visual experience
-Powered by dual 18650 batteries with max 200W output
Package includes:
1x Hela II Box Mod
1x RDTA
1x RDA Adapter
1x Cotton & Coils Bag
1x USB Cable
1x User Manual
1x Accessory Bag
Asmodus Flow Pod System Kit 500mAh (Buttons Free)
Product introduction
Asmodus Flow, the first pod system kit from Asmodus, is integrated with a rechargeable 500mAh battery and comes with a 2.0ml refillable pod. Constructed of a lightweight aluminium, it’ll reduce the weight when put in pocket and is convenient to carry around. The Asmodus Flow is free of buttons and utilizes a draw-activated firing mechanism to activate the vaporization making for a much more luxurious vape system.
Parameters:
Size: 110x 22x 11.5mm
2.0ml juice capacity
Coil resistance: 2.5Ω
Cycle life: 200 charges
500mAh built-in battery
Micro USB charging port
Features:
-Ergonomic & slim design
-Draw-activated firing mechanism
-Proprietary gold-plated magnetic connection
-Low-voltage/ short-circuit/ over-charge & over-time protection
Package includes:
1x Asmodus Flow Pod Kit
1x USB Charging Cable
1x User Manual
Ehpro x Vaping with Vic Kelpie RTA (2.0/3.5ml, Single Coil)
Product introduction
The Kelpie RTA, a collaboration between Ehpro and Vaping with Vic, is a well made rebuild-able tank atomizer with 2.0ml capacity and can be extended to 3.5ml larger juice storage with an extra bubble tube. With the honeycomb air slots and the airflow hits coil directly, the Kelpie will bring pure flavor for you. In addition, the Ehpro Kelpie RTA also adopts dual-post build deck for easy coil installation.
Parameters:
Size: 25x 40mm
Capacity: 2.0ml/ 3.5ml
510 thread connection
Single coil configuration
Material: Stainless Steel& Glass
Features:
-Simple cotton wicking
-Easy slide top refilling design
-Honeycomb air slot for great flavor
-Dual posts for easy coil installation
-Designed by Ehpro & Vaping with Vic
-Innovative two ways to build the coil
Package includes:
1x Ehpro Kelpie RTA
4x Philips Head Screws
1x 3.5ml Glass Tube
2x Pre-made Coils
1x Screwdriver
3x O-rings
1x Cotton
1x User Manual
Asmodus Pumper 20/21 Stabilized Wood Squonk Mod
Product introduction
Asmodus Pumper 20/21 Mod, as you can tell from the name (20/21), is powered by a single 20700/21700 battery and integrated with stabilized wood construction with a proprietary pump mechanism. The cut-out section is with a 7.0ml squonk bottle for convenient utilization with bottom feeding atomizers. Meanwhile, the Asmodus Pumper BF output level depends on the current state of the battery, and shut off when the battery reaches 3.3V.
Note: Each stabilized wood mod is made from genuine maple and will contain natural imperfections. Color difference from unit to unit and pictures are depicted for general visualization purposes.
Parameters:
7.0ml squonk bottle
510 thread connection
LED battery light indicator
Superior SS316L construction
High-End stabilized wood panel
Output voltage range: 3.3- 4.2V
Minimum atomizer resistance: 0.1ohm
Powered by single 20700/ 21700 battery (Not included)
Features:
-Low Voltage Protection
-Oversized Circle Firing Mechanism
Squonk-Ready Bottom-Feeding Section
-Negative Polarity, Overheat Protection
-Work Overtime Protection, Atomizer Short Protection
Package includes:
1x Pumper 20/ 21 Mod
1x 7.0ml Squonk Bottle
Pioneer4you IPV V-IT 200W Box Mod w/ YIHI SX540 Chip
Product introduction
Pioneer4you IPV V-IT Box Mod, equipped with the advanced Yihi SX540 chipset, powered by dual 18650 batteries with 200W max output, comes with instant ignition function and 1.3 inch TFT IPS HD screen that displays quality with better and truer colors. With slight inward ergonomic curvature, the V-IT box mod fits neatly into the natural shape of the hand, making the intuitive firing button easy to reach.
Parameters:
Size: 92.5x 48.3x 35.9mm
Two fonts available
TFT IPS 1.3" HD screen
510 thread connection
Bypass mode: Mechanical mode
Standard resistance: 0.05- 3.0ohm
Temp. control with SS316L/ Ni200/ Ti01
Powered by dual 18650 batteries (Not included)
Flavor mode: Soft/ Standard/ Powerful, Powerful+ and SXi-Q-S1
Features:
-Powered by YIHI SX540 chip
-Customize your own wallpaper
-Short circuit/ overheat Protection
-Low resistance/ low voltage protection
-Reverse/ battery overcharge protection
Package includes:
1x IPV V-IT Box Mod
1x Micro USB Cable
1x User Manual
1x Giftbox
New Colors of Think Vape Thor 200W TC Box Mod
Product introduction
Thinkvape Thor Mod, powered by dual 18650 batteries, with attractive& unique patterns and ergonomic design which is comfortable to grip, supports a maximum output power of 200W. With the most advanced ST200 Chip, the Thor 200W Mod provides a stable and high performing VW/ TC modes with a 0.96" OLED screen. Together with comfortable operation buttons and easy USB charging, the Thor 200W TC Mod will bring you an extremely powerful vape with simple operation.
Parameters:
Size: 88.5x 46x 32mm
Screen: 0.96 inch OLED Screen
Wattage range: 5W- 200W
Chip: ST200
Material: ABS
Thread: 510 thread
Temperature range: 93℃-315℃/200℉-600℉
Working modes: VW/VT(Ni/Ti/SS)/TCR/Bypass
Resistance range: 0.05-3.5ohm
Battery: 2x 18650 Battery (Not included)
Features:
-0.96" OLED Display
-High Performance VW/ TC Modes
-Dual External 18650 Batteries
-Comfortable Operation Buttons
-Portable TC Box MOD with Attractive Patterns
-200W Max Output with Advanced ST200 Chip
Package includes:
1x Think Vape Thor 200W Mod
1x User Manual
1x Micro USB Cable
Desire More Pro Pod System Kit 1000mAh
Product introduction
The Desire More Pro Pod System Kit, powered by an internal 1000mAh long lasting battery for whole-day vape, aims to provide the most amusing vaping experience. Included in the package is also a 2.0ml juice pod with 1.2ohm coil resistance, which is best for nic salts. Bedises, the More Pro Kit has a self-designed chipset by Desire, bringing various protection and ensuring a safe vape too.
Parameters:
Size: 19x 103mm
Capacity: 2.0ml
Resistance: 1.2ohm
Voltage range: 3.0- 4.2V
1000mAh built-in battery
Long press the button to vape
Features:
-Last a whole day without charging
-New chipset with various protections
-Small and lightweight for easy carrying
-2.0ml cartridge can be refilled 4- 6 times
Package includes:
1x More Pro Battery
1x More Pro Cartridge
1x USB Cable
1x User Manual
1x Warranty Card
