SMOK Novo 2 Pod Starter Kit 800mAh (Air-intake Grooves)
Product introduction
SMOK Novo 2 Kit powered by larger 800mAh built-in battery with improved LED indicator, it supports longer vaping time with fires up to 25W max power. Plus the newly added air-intake grooves on both sides with redesigned sensing element, the Novo 2 brings more air in and produces huger vapor and purer flavor.
Parameters:
Charging Voltage: 5V
Overcharge Current: 1A
E-liquid capacity: 2ml
Size: 88.324.514.5mm
Output wattage: 6W-25W
Overcharge Voltage: 4.3V
Battery Capacity: 800mAh
Input voltage: 3.3V-4.2V
Output Voltage: 3.0V-4.0V
Over-discharge Voltage: 2.4V
Charging Current: Max: 0.55A
Resistance of Pre-installed Pod: 1.0Ω
Standby Current: <20uA(No-load) <50uA(Load)
Coil: 1.0ohm Mesh Coil(pre-installed); 1.4ohm DC MTL Coil
Features:
-Redesigned sensing element
-Two brand-new pod cartridges
-Newly added air-intake grooves
-Widely compatible with Novo pod
-Easily draw-activated design without button
-Larger 800mAh battery for longer vaping time
-Updated version of Novo with optimized details
-Improved LED indicator with accurate condition
Package includes:
1x NOVO 2 Mesh 1.0ohm Pod
1x NOVO 2 DC 1.4ohm MTL Pod
1x Manual
1x Usb Cable
1x Novo 2 Battery
IJOY AI EVO Resin Pod Starter Kit 1100mAh
Product introduction
IJOY AI EVO Resin Pod Starter Kit consists of a 1100mAh built-in battery and a redesigned 2.8ml refillable pod. It comes with 0.7ohm Mesh Coil and 1.4ohm Coil and engineered to support max 20W output.
Parameters:
Max power: 20W
Capacity: 2.8ml
Size: 94x 30x 18mm
Output Voltage: 3.3- 4.2V
Fill type: Bottom-pressing refill
Battery: Built-in 1100 mAh battery
Material: Zinc Alloy & stainless steel & resin
Coil resistance: AI EVO 0.7ohm Mesh Coil (15-20W pre-installed);
AI EVO 1.4ohm Coil (8-12W)
Features:
-Double-side resin panels
-Multiple battery protections
-1100mAh large capacity with 20W output
-1.4ohm regular coil and 0.7ohm Mesh coil
-Innovative bottom-pressing refill system
Package includes:
1x IJOY AI EVO Device
1x AI2 COIL 1.4ohm
1x AI2 COIL Mesh 0.7ohm (Pre-installed)
1x USB Cable
1x User Manual
1x Warranty Card
Damn Vape Doom Mesh RTA (Quad-Mesh & Hex-Mesh)
Product introduction
The Damn Vape Doom RTA, with perfect combination of mesh coil and RBA tank, is an innovative Mesh RTA that will bring purest flavor and hugest cloud. In addition, the Doom RTA comes with a unique build deck, users can easily cut off the cotton at the edge of the deck without any tricks.
Plus the unique 3D Liquid Flow System with sloped upward airflow through the chamber, the Doom RTA provides excellent liquid transmission, reduces overheating effectively and brings pure tasty flavor.
Parameters:
Size: 26x 31.6mm
810 POM drip tip
510 thread connection
E-juice capacity: 4.0ml
Material: Stainless steel
Mesh coil: Quad-Mesh 0.11ohm; Hex-Mesh 0.13ohm
Features:
-Unique 3D Liquid Flow System
-Pure Tasty Flavor and Huge Cloud
-Sloped Upward Airflow & Compact Chamber
-Unique Build Deck for Easy Coil Building and Wicking
-Special Mesh RTA with Two Mesh Coils and FOXTAIL-M Cottons
Package includes:
1x 4.0ml Doom RTA
1x Extra Glass Tube
2x FOXTAIL-M Cotton
2x Mesh Coil
1x Mesh Jig
1x User Manual
1x Spare Parts Bag
Oukitel BISON Pod System Kit 1000mAh (Adjustable Power)
Product introduction
The Oukitel BISON 30W Pod System Kit has a high-definition LED screen which will orderly show the battery life, vaping time, resistance, and power. This device powered by a built-in 1000mAh battery and features a power range of 10-30W. Combining a zinc-alloy chassis with strong durable kevlar, the Bison Pod System is geared for those that require strength and functionality from a vaping system.
Parameters:
Size: 93x 38x 15mm
E-liquid Capacity: 2.0ml
Working voltage: 3- 4.2V
Screen: LED screen display
Resistance: 0.6ohm/ 1.2ohm
Button: Press button to start
Material: Metal, Resin and Kevlar
Battery Capacity: 1000mAh Built-in Battery
Features:
-Top Refilling System
-Intelligent LED Screen
-1000mAh Power & 2ml Liquid Capacity
-Adjustable Power Degree From 10-30W
-Allows 0.6ohm Mesh Steel Coil And 1.2ohm Ceramic Coil
Package includes:
1x BISON Battery Body
1x BISON Pod
1x 0.6ohm Mesh Coil
1x 1.2ohm Ceramic Coil
1x User Manual
1x MicroUSB Cable
1x Lanyard
1x Outer Box
2Pcs/Pack IQS Replacement Pod (Orion DNA/Orion Q)
Product introduction
The IQS Replacement Pod is designed for Orion DNA and Orion Q with 3ml capacity.
Parameters:
Capacity: 3ml
Resistances: 0.3ohm, recommended for Orion DNA
0.8ohm, recommended for Orion Q
Features:
-Organic Cotton Wicking
-Fully Adjustable Airflow
-Threaded Metal Refill Cap
Package includes:
One pack of IQS Replacement Pod
CKS Junior Pod Starter Kit 1000mAh
Product introduction
The CKS Junior AIO Pod Starter Kit, with 3.0ml pod capacity, powered by an internal 1000mAh battery, is an inclusion of the best pod system features. Constructed of ABS and polycarbonate plastic, the CKS Junior is a light-weight pod system, but is jam-packed full of features.
Delivering a 3 power level voltage based output system, the CKS Junior can be tailored to the individual user, providing a soft, normal, or hard vaping experience.
Parameters:
Size: 84.3x 44.5x 19mm
Pod capacity: 3.0ml
Pod material: PCTG plastic
1000mAh internal battery
3 power levels: 3.2V/ 3.5V/ 3.8V
ABS & polycarbonate chassis construction
CKS Junior Coils: 0.6ohm KA Mesh Coil; 1.0ohm KA Mesh MTL Coil
Features:
-CKS Junior Coil Series
-Voltage Adjustment Button
-Coil Based Airflow Control
-LED Battery Life Indicator Light
-Side Fill System, Silicone Stoppered
-10s Cut-Off Protection, Overcharge Protection
-Low Battery Protection, Short Circuit Protection
Package includes:
1x CKS Junior Battery
1x 3.0ml Junior Pod
2x 0.6ohm Mesh Coil
1x Micro USB Cable
1x Standard Drip Tip
1x MTL Shorty Drip Tip
1x Spare O-Rings
1x User Manual
1x Warranty Card
Vapefly Brunhilde MTL RTA (Automatic e-juice transfer)
Product introduction
The Vapefly Brunhilde MTL RTA, perfectly compatible with mouth to lung vape with 1.0ohm 26GA Ni80 Coil, is an exquisite rebuildable tank atomizer that adopts unique bottom airflow system with six levels airflow control 0.9mm/ 1.2mm/ 1.4mm/ 1.8mm/ 2.1mm/ 2.5mm to bring optimal vaping flavor and tastes.
Moreover, the MTL RTA contains two premium Stainless steel wires wires from Germany which features continuous automatic e-juice transfer system. The deck of RTA supports easy single coils building, and it also comes with easy side refilling design.
Parameters:
Size: 23x 65.5mm
Juice capacity: 5.0ml
Single coil configuration
510 thread connection
Bottom adjustable airflow
Features:
-Automatic e-juice transfer
-Convenient side filling design
-Easy single coil building, best coil position
-Six levels airflow meet your different needs
-Premium Stainless steel wires from Germany
Package includes:
1x Brunhilde MTL RTA
2x Pre-built 1.0ohm 26GA (Ni80)
2x Stainless Steel Wires
1x T-type Screwdriver
1x Resin Long Drip Tip
6x Screw Airflow Sets
2x Firebolt Cotton
1x User Manual
1x Allen Key
1x Glass Tube
9x O-rings
8x Screws
Rincoe Tix Pod Kit 1000mAh (Adjustable airflow)
Product introduction
The Rincoe Tix Pod Kit, integrating a built-in 1000mAh battery and a 2.0ml pod cartridge, features ergonomic design with great hand feeling. The Tix features a breakthrough design with bold pattern, which makes it outstanding in the market. Moreover, utilizing the adjustable airflow system to satisfy both MTL and DTL vapers, you just twist the airflow ring to adjust airflow and enjoy the excellent vaping journey.
Parameters:
Size: 90.7x 43x 19mm
Power range: 10- 20W
Input: 3.2- 4.2V
Charging: 5V/ 1A
Pod capacity: 2.0ml
1000mAh built-in battery
Coil resistance: 0.3- 3.0ohm
Material: Zinc alloy +PC + IML
Features:
-3 modes to meet different vaping demands
-Available in two coil types for your options
-Portable size with lanyard & Fashionable appearance
-Housing a massive 1000mAh battery with type-c charge
-Adjustable airflow satisfies both MTL and DTL vapers
-Multiple protections applied to ensure devices stable
Package includes:
1x Rincoe Tix Pod Kit
1x Tix Regular 1.0ohm Coil
1x Type-C Charging Cable
1x Certificate Card
1x Warranty Card
1x User Manual
1x Lanyard
Yachtvape Meshlock RDA (Wotofo Profile RDA Killer)?
Product introduction
Yachtvape Meshlock RDA, with 24mm diameter, constructed of stainless steel and resin, is a super innovative rebuilda-ble atomizer specifically designed for mesh coils, this RDA features press-to-open terminals (no screwdrivers) for extremely easy and fast coil installation. Two of the holes direct to the juice wells on either side of the deck, and a third direct juice straight to the coil.
Parameters:
Size: 24x 26.6mm
510 threaded connection
Material: Stainless Steel & resin
Resistance: 0.13ohm Mesh Coil (60- 80W);
0.20ohm Mesh Coil (50- 70W)
Features:
-Top airflow
-Three juice inlet hole
-Easy and fast coil installation
-0.13ohm/0.2ohm Mesh coil for excellent flavor
-Press-to-open terminals for easy mesh installs
Package includes:
1x Yachtvape Meshlock RDA
1x Extra 810 Drip tip
1x Japanese cotton
2x Mesh Coils
1x Accessory
1x User Manual
Augvape Merlin Nano MTL RTA (3 Adjustable Airflow Inserts)
Product introduction
The Augvape Merlin Nano MTL RTA, with 2.0ml/3.5ml juice capacity, features a dual post single terminal build deck. Furthermore, to satisfy different requirements of vape lovers, the added 3.5ml bubble tank and 22mm beauty ring are included in the package as well. The three adjustable airflow inserts is genius to this RTA for your special needs dealing with flavorful trip.
Parameters:
Size: 18x 55.8mm
(Optional 22mm beauty ring)
Juice capacity: 2.0ml/ 3.5ml
Gold plated 510 connector
Drip tip type: 510
Features:
-Bottom refill system
-Compatible with MTL vaping
-Two post single coil build deck
-Adjustable airflow inserts for smooth flavor
-Dual post single terminal build deck with single coil system
Package includes:
1x Merlin Nano MTL RTA
1x Screwdriver
1x 22mm Beauty Ring
1x 3.5ml Bubble PCTG
1x Premade Kanthal Coil
1x Pre-made Nichrome Coil
1x Accessory Bag (O-rings, Screws)
2x Airflow Inserts (Diameter 1.2mm/2mm)
1x User Manual
Smok RPM40 Pod Mod Kit 1500mAh (New IQ-R Chip)
Product introduction
Smok RPM40 Pod Mod Kit, with 1500mAh long lasting battery, is an ultra-portable pod mod that shapes like a cuboid and is covered with glossy finish and characteristic material, making the whole device look fancy and stylish.
The internal IQ-R chip is a new one, shortening the firing time to 0.001S, and charging time to two hours. Different from normal tiny and slim pod devices, RPM40 is designed with a 0.96-inch screen, with which, detailed vaping data is clearly presented, like the wattage, resistance, voltage, screen color, puff number, and battery level.
Parameters:
Size: 25x 25x 99mm
Charging voltage: 5V
Output wattage: 1- 40W
Standby current: <140uA
Overcharge voltage: 4.3V
Input voltage: 3.3- 4.2V
Battery capacity: 1500mAh
Output voltage: 0.5- 4.1V
Over-discharge voltage: 2.4V
Charging current: 0.88A (Max)
Resistance range: 0.2- 2.50ohm
Features:
-New PRM Mesh 0.4ohm Coil
-5ml/4.3ml/4.5ml E-juice capacity
-Powered by 1500mAh built-in battery
-0.96-inch screen to display the vaping data
-Multiple protections: 8 Seconds Cut-off
-Short Circuit protection and Low voltage protection.
-Brand new IQ-R Chip, shortening the firing time to 0.001s
Package includes:
1x Smok RPM Device
1x RPM Standard Pod
(RPM Mesh 0.4ohm Coil Preinstalled, 4.3ml)
1x RPM Nord Pod
(Nord DC 0.6ohm Coil Preinstalled, 4.5ml)
1x USB Cable
1x User Manual
G-Taste Mimo Pod Kit 450mAh
Product introduction
G-Taste Mimo Pod Kit, with a light weight of only 24 grams, powered by an internal 450mAh battery, is an ultra portable system that features leakage free design. The Mimo pod holds 1.3ml e-juice and utilizes 1.8ohm coil.
Parameters:
Size: 14.5x 90.4mm
Pod capacity: 1.3ml
450mAh internal battery
Coil resistance: 1.8ohm
Material: Plastic & SS
Input voltage: 3.3- 3.7V
Charging: Micro USB 5V/ 500±50mA
Features:
-Ultra portable size
-Ergonomically designed
-Perfect balance with flavor and cloud
-Light in weight, convenient to carry around
Package includes:
1x G-Taste Mimo Battery
1x USB Charging Cable
1x Needle Tip Bottle
2x Pod Cartridge
1x User Manual
1x Lanyard
$39.99 Free Shipping Smok 225W X-Priv Kit with TFV12 Prince
Product introduction
The Smok X-Priv Kit comes with a new X-Priv Box Mod and a TFV12 Prince tank. Powered by dual 18650 batteries, the X-Priv is able to reach up to a maximum output power of 225W. The X-Priv also features glassy appearance with 2.0" massive HD display, bringing smooth touch with excellent texture to you.
As for the TFV12 Prince, it features a crown-style body, wild Cobra resin drip tip and convex glass tube up to 8.0ml. The adjustable bottom airflow with new Q4, X6 and T10 cores bring intense flavor and vapor production.
Parameters:
X-Priv Box Mod
Size: 88x 46.5x 30.4mm
Wattage Range: 6- 225W
Voltage Range: 0.5- 9V
Standby Current: ＜500uA
Batteries: 2x 18650 batteries (Not included)
Resistance: 0.1- 2.5ohm(VW)/ 0.05- 2ohm(TC)
Temperature Range: 200℉- 600℉/ 100℃- 315℃
TFV12 Prince
Thread: 510
Size: 63x 28mm
Capacity: 8.0ml
Coil: Compatible with Q4/ X6/ T10 Core
Material: Stainless steel and pyrex glass
Features:
-Glassy appearance with smooth surface
-Massive 2.0-inch HD screen
-Dual battery indicator
-Easy-installed battery cover
-Wild Cobra Drip Tip
-Convex Glass Tube 8ml
-Adjustable Bottom Airflow
-New V12 PRINCE Q4/ X6/ T10 Core
-Patented Locking Mechanism
-Top refill system
Package includes:
1x X-Priv Box Mod
1x 8.0mlTFV12 Prince Tank
1x V12 Prince Q4 0.4ohm Quadruple Core (pre-installed)
1x V12 Prince T10 0.12ohm Decuple Core
1x USB Cable
1x Replacement Glass Tube
1x User Manual
Spare Parts
$31.88 Free Shipping Eleaf iStick Pico 75W TC Kit
Product introduction
The iStick Pico 75W, just like its name, is preferable, innovative, compact and outstanding (PICO). With a compact size, you can hold it in the palm, much more convenient for usage and portability. Powered by single interchangeable 18650 cell, the iStick Pico also provides you with 75W maximum output and switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes.
Parameters:
Melo 3 Mini
Diameter: 22mm
Length: 55mm
Capacity: 2.0ml
Thread type: 510 thread
Material: 304 stainless steel
iStick Pico Mod
Size: 45x 23x 70.5mm
Voltage: max 9.0V
Wattage (maximum): 75W
Battery: High rate 18650 cell
(Continuous discharge current should be above 25A)
Mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR
Resistance range: 0.05- 1.5ohm (TC modes); 0.1- 3.5ohm (VW/Bypass mode)
Features:
-75W Max Output with compact size
-VW/Bypass/TC-Ni/TC-Ti/TCR Mode
-Replaceable 18650 Cell
-Elegant appearance in 5 colors
-Top filling and hidden adjustable airflow
-Unique bottom design
-Upgrade-able firmware
Package includes:
1x iStick Pico Mod (no cell)
1x MELO III Mini Atomizer
1x EC 0.3ohm Head
1x EC 0.5ohm Head
4x Seal Ring
1x USB Cable
2x User Manual
Orchid Pod System Starter Kit 950mAh
Product introduction
The Orchid, with 950mAh internal LiPo battery and 3.0ml e-juice capacity, is an extremely versatile and innovative Pod System Starter Kit. The Orchid utilizes a 0.8ohm ohm mesh to make the fantastic flavor and cloud production when used with freebase and salt nicotine e-Liquids. Apart from that, the Orchid Pod System delivers a maximum output of 30W, along with wattage, variable voltage, and SS temp control operating modes.
Parameters:
Juice capacity: 3.0ml
0.69 inch OLED screen
950mAh internal battery
Refilling: Knurled top fill cap
Chipset: Proprietary chipset
Power output range: 5- 30W
Voltage output range: 3.0- 4.8V
Temperature control range: 200- 500℉
Resistance: 0.8ohm mesh heating element
Material: Zinc alloy chassis & polycarbonate shell
Modes: VW, VV, and SS temp control operating modes
Features:
-Locking retention tabs
-Gold plated magnetic connection
-Airflow: Knurled airflow control ring
-High resistance, and low resistance protection
-Two adjustment buttons and Single firing button
-Micro USB pass-through charging and firmware update port
-Protection: Overheat, overtime, low voltage, over voltage, short-circuit, no-load
Package includes:
1x Orchid Pod System Kit
1x Orchid 0.8ohm Mesh Coil
1x USB Cable
1x User Manual
BOHR Flask Pod Kit 1150mAh (Mesh coil & Ceramic coil)
Product introduction
The BOHR Flask Pod Kit is powered by built-in 1150mAh battery with 2ml e-juice capacity, features mesh 0.4ohm coil and ceramic 1.2ohm coil. It comes with a high definition OLED screen with screen button, adjust button, and fire button which enable you can change its various mode to control wattage, voltage and play.
Parameters:
Capacity: 2.0ml
Wattage: 1- 20w
Battery: 1150mAh
Size: 90x 43x 15.5mm
Resistance: 0.4 ohm (Mesh)
1.2 ohm (Ceramic)
Features:
-Overcharge protection
-Short circuit protection
-Over temperature protection
-Powered by built-in 1150mAh
-With a high definition OLED screen
-With a intelligent SAGA player chip
Package includes:
1x Flask Pod System
1x Flask Cartridge
1x Flask 0.4ohm Mesh Coil
1x Flask 1.2ohm Ceramic Coil
1x USB Cable
1x User Manual
1x Warranty Card
510Vape SPAS-12 Resin Starter Kit 950mAh
Product introduction
510Vape SPAS-12 Resin Starter Kit has a built-in 950mah battery to support long time vaping. It support to refill 2ml juice capacity with replaceable coils.The included cartridge adopts 0.8ohm coil and 0.4ohm mesh coil bring you the better flavour.
Parameters:
Power: 8-16W
Voltage: 3.3V-4.2V
Charging: USB DC5V 500mA
Size: 95 x 40.5 x 17.5mm
Capacity: 2ml (refillable)
Battery Type: Built-in 950mAh
Material: Resin/Aluminum Alloy
Coil Resistance: 0.4ohm Mesh Coil;
0.8ohm Regular-MTL Coil
Features:
-Replacement coil
-2ml e-juice capacity
-Adjustable bottom airflow system
-PC material and magnet connection
-Non-button design, inset pod and vape
-950mAh built-in battery for all-day-long vape
-LED power indicator: Red 0-30%, Blue 31-50%, Green 50-100%
Package includes:
1x SPAS-12 Device
1x Empty Pod (2ml)
1x 0.4ohm Mesh Coil
(Non-Nicotine E-liquid)
1x 0.8ohm Regular-MTL Coil
(Nicotine E-liquid)
1x User Manual
1x Warranty Card
1x Micro USB Cable
Mechlyfe Ratel Pod Kit (Rebuildable & Single 18650 Battery)
Product introduction
Mechlyfe Ratel Rebuildable Pod Kit, with single coil configuration, is the first pod starter kit that supports single 18650 battery. With 80W max output, the Ratel features 6 working modes: Power/Voltage/Bypass/Ni/Ti and Temperature control. Not only is the Ratel features portable and palm-friendly design, it also has rechangeable panels on both side. Moreover, the Mechlyfe Ratel is compatible with both MTL vape and DTL vape.
Parameters:
Power: 5- 80W
TC mode: 200- 600℉
Output voltage: 0.5- 0.8V
Resistance: 0.05- 3.5ohm
Battery: Single 18650 (Not included)
6 modes: Power/Voltage/Bypass/Ni/Ti/TC
Easy rebuild-able single coil build deck
Features:
-Support MTL vape & DTL vape
-CNS carved aluminum main body
-Re-changeable panels on both side
-Portable and palm-friendly design
-Low-battery warning, overcharge protection
-Open circuit protection, over-current protection
-Overtime protection, battery anti-reverse protection
Package includes:
1x Ratel Rebuildable Pod
2x MTL Fused Clapton Coil
1x Organic Cotton
1x USB Charger
1x Screwdriver
1x Orings Bag
4x Screws
Augvape VTEC 1.8 Box Mod (Modes: Auto, Bypass, VV and V)
Product introduction
Augvape Vtec 1.8 Box Mod, powered by dual 18650 batteries with 200W max output, is an ergonomic mod that is decorated with leather strip to deliver great hand feeling. Besides, the Vtec 1.8 features a hidden firing mechanism integrated onto the 0.96 inch OLED display as well as a rotating adjustment button with the analog trigger for setting adjustments. The internal chipset is intelligent with three different output modes: Normal, Bypass, and V Mode.
Parameters:
Size: 87.5x 45x 29.2mm
Wattage range: 5- 200W
Material: Zinc alloy
Charging current: 12A
Input voltage: 0.5- 7.2V
510 thread connection
Standby current: ＜500 QA
Resistance range: 0.05- 3.0ohm
Working modes: Auto, Bypass, VV and V Mode
Powered by dual 18650 batteries (Not included)
Features:
-Strong & durable battery door
-4 working modes for different vaping needs
-Decorative leather strip with great hand feeling
-OLED screen to show accurate battery condition
Package includes:
1x Augvape VTEC 1.8 Mod
1x USB Charging Cable
1x Warranty Card
1x User Manual
YiHi SXmini X Glass Box Mod 200W (Yihi SX650J Chip)
Product introduction
YiHi SXmini X Class, powered by dual 18650 batteries with 200W max output, is an auto-squonk system that incorporates a myriad of output variations, exquisite visual detailing, and features the advanced YiHi SXmini X Class Reservoir with innovative ESS Technology.
Equipped with the brand new Yihi SX650J chip, the SXmini X Glass has control over more functions than earlier options, also has Bluetooth or Wifi connection. Manufactured from a beautiful zinc-stainless steel alloy chassis with carbon fiber accents, the X Class Box Mod carries an aura of the highest luxury.
Parameters:
Size: 89x 41.5x 31.5mm
Power range: 5- 200W
Output power: 5-100W
Display: TFT Color display 0.69"
Output voltage (Power Mode): 0.7-9.5V
Output voltage (Joule mode): 10- 100J
Temperature range: 212-572℃/ 100- 300℃
Powered by dual 18650 batteries (Not included)
Resistance range: 0.05-3.0ohm (Power mode/ Joule mode)
Temp control variable Joules: Ni/ Ti/ SS
TC Mode (Ni/Ti/SS): Anti-Dry Burning Technology Via Bluetooth App
Taste Modes: Powerful+, Powerful, Standard, Soft, Eco, and SXi-Q-S1-S5
Features:
-Buck-Boost & Boost, DC-DC Converter
-Centered 510 Connection and MicroUSB Port Type C
-SXi-Q control system - Customize your own taste
-ESS Driver Technology - Electronic Spray Squonker
-Zinc-Stainless Steel Alloy & Carbon Fiber Chassis Construction
-Intelligent Juice Level Monitoring and Intuitive Firing Button
-Multiple protection mechanisms for a better vaping experience
Package includes:
1x SXmini X Class Mod
2x Extra E-Liquid Bottle Plug
1x MicroUSB Cable
1x User Manual
1x Warranty Card