Product introduction Nevoks Lusty AIO Pod Kit is powered by 1000mAh battery, featuring 3.3mL e-liquid pod capacity and 3 different kinds of coils to support both MTL and DTL to users. Moreover, the included three different coils can auto-recognize resistance and adjust the wattage. Parameters: Lusty Pod:
Material: Kanthal
E-Liquid Capacity: 3.3mL
Battery: built-in 1000mAh
Dimensions: 97mm x 33.7mm x 19.7mm
Lusty Battery:
Size: 402510(mm)
Output Power: 12-25W
Stand-by current: <40uA
Low Voltage Warning: 3.2V
Battery: Built in 1000mAh
PCBA Temperature alarm: 80℃
Maxium output duration: 10s
Working temperature: -10-45℃
Charging Specification: 750mAh-1000mAh
Battery life indicator:
Red light:0%-20%;
Blue light:20%-50%;
Green light:50%-100% Features:
-12W-25W power
-3.3mL e-liquid pod capacity
-Powered by 1000mAh battery
-Adjustable airflow for excellent flavor
-3 different coils to provide both MTL and DTL Package includes:
1x Lusty Device
1x Lusty 3.3mL Pod
1x Rubber Plug
2x Extra O-Rings
3x Coils (1x pre-installed)
(2x extra)
1x Micro USB Cable
1x Warranty Card
1x User Manual
Product introduction Think Vape ZETA Pod Kit, with the ergonomic and portable design, is powered by single 18650 battery with a maximum output power of 60W. In addition, the ZETA comes with 0.2/ 0.5ohm mesh coil, 1.0 ohm regular DC coil for DTL and MTL vaping to satisfy different vaping needs and bring you an outstanding vaping experience.
Plus the 3.0ml pod cartridge with easy refilling design, advanced chip with multiple protections and adjustable airflow, the Think Vape ZETA AIO Pod Kit is definitely a wonderful pod vape device.
Parameters:
Size: 86x 45x 25mm
Output wattage: 5- 60W
Juice capacity: 3.0ml
Drip tip type: 510
Pod material: Food grade PCTG
Modes: Power/ Bypass/ NI/ SS
Coil resistance: 0.2ohm mesh coil, 0.5ohm mesh coil,
1.0ohm regular DC coil, RBA coil (Sold separately)
Powered by single 18650 battery (Not included)
Features:
-Allow DTL and MTL vaping
-Support RBA coil for DIY lovers
-Advanced chip with multiple protections
-Multiple coils for your different demand
-Available four modes for different needs
-Powered by single 18650 battery with 60W max output
Package includes:
1x ZETA AIO 60W Pod Kit
1x 1.0ohm Regular DC Coil
1x 0.5ohm Mesh Coil
1x USB Cable
1x User Manual
Product introduction The Rebirth RTA, a follow-up project after the success of Rebirth RDA, is designed by Mikevapes and manufactured by Hellvape. It’s a 25mm RTA that accommodates dual coil build with honeycomb airflow system. Filling method on this Rebirth RTA is pretty simple that you just need to push and then lift the top cap, then you’re able to fill ejuice through the filling ports. Parameters:
25mm diameter
810 cobra drip tip
810 frosted drip tip
510 thread connection
Capacity: 2.0ml/5.0ml
Dual coil configuration Features:
-Quarter turn top fill
-7.5mm coil cutting tool
-Adjustable bottom airflow
-Dual post build deck with gold plated positive post
-14x 1mm and 2x 1.5mm honeycomb airflow holes on each side Package includes:
1x Hellvape Rebirth RTA
1x Spare 810 Drip Tip
1x Spare Glass
1x 510 Adapter
1x Accessory Bag
1x Rebirth Sticker
1x Coil Cutting Tool
1x User Manual
Product introduction Timesvape Keen Mech Mod, powered by single 18650/20700/21700 battery, features a unique floating contact pin with ball head for hard fitting. The Keen mod is beautifully crafted measuring in at 30mm at its widest point, tapering to 25mm or 27mm at the top, with KEEN embossed upon the central portion of the mod. Spec & features:
Built-in Delrin tube to protect wrap
30mm body tapered to 25mm/27mm diameter
Floating battery adjustment and hybrid 510 connection
Gold plated contact pin and flat smooth button spring
21700 / 20700 / 18650 compatible (with included 18650 adapter)
Innovative floating contact pin with ball head for hard hitting Package includes:
1x Timesvape Keen Mod
1x 18650 Battery Adapter
1x 25mm Adapter Cap
1x 28mm Adapter Cap
1x Accessory Bag
1x User Manual
Product introduction Ultroner x DJV Mecha Hybrid Mech Mod is the latest collaboration between Ultroner and Dejavu. Constructed from premium quality brass and stabilized wood chassis, the Mecha is a single 18650 battery tube mod with beautiful color. Including spring and magnet switch for different hand feel and the hybrid 510 threading connection match most atomizer in the market.
Parameters:
Size: 25x 87mm
510 thread connection
Material: Brass+ stabilized wood
Single 18650 battery (Not included)
Fire button: Stainless Steel or acrylic
Features:
-Combination of Ultroner and Dejavu DJV
-Spring or magnet switch for different hand feel
-Premium quality brass and stabilized wood chassis
Package includes:
1x DEJAVU DJV Mecha Mech Mod
1x Alloy Knurling Sleeve (Assembled)
1x DJV Camouflage Bag
1x Polyacetal Sleeve
1x Spring (Assembled)
1x Accessories Pack
2x Stickers
1x Magnet
Product introduction Innokin MVP5 120W Box Mod, with a large battery capacity of 5200mAh, is unique for serving as an outdoor survival kit with flashlight, compass, thermometer, barometer, altimeter readings. Meanwhile, the MVP5 can also be a power-bank and LED flashlight (with 6 modes: Max, Mid, Min, SOS, Beacon and Strobe).
It is available in 3 Wattage Modes (Normal, Boost and Soft), Temperature Control, TCR, 4 Memory Slot programmable curve and optimized “Easy Select” wattage pre-sets for different vaping flavor. Parameters:
Material: Zinc-Alloy
Wattage range: 6- 120W
Modes: Power/ TC/ TCR
Threading: 510 Connection
Screen: OLED Display Screen
Resistance range: 0.1- 3.5ohm
Charging: MicroUSB Type-C Port
Battery: Internal 5200mAh battery Features:
-5200mAh for long-lasting vaping battery
-Equipped with advanced Aetheon Chipset
-Various power modes for different vaping experience
-Survival features: Flashlight, Compass, Thermometer, Barometer, Altimeter Package includes:
1x MVP5 120W Mod
1x User Manual
1x USB Cable
Product introduction
The Dreamer Mechanical Mod was designed in the USA by Stan at TenaciousTXVapes, manufactured by Timesvape. The Dreamer Mech Mod is a hard-hitting single tube mech which runs on either a 18650, 20700 or 21700 cell (all sold separately), and has a unique multi-point contact pin for increased conductivity. The tube itself is 27mm at its widest point, tapering to 25mm at the top. The tube is reversible, so you can customize the grip to suit your preferences. The copper contact pin is also silver-plated for a perfect connection every time. Spec and Features:
27mm body tapered to 25mm diameter
Silver plated edge copper contact pin
Reversible tube for customizable grip
21700 / 20700 / 18650 compatible (with included 18650 adapter)
Innovative multi-point contact pin for increased conductivity
Automatic floating battery adjustment and hybrid 510 connection Package Contents:
1x Dreamer Mechanical Mod
1x 18650 Battery Adapter
2x Spare Springs
1x User Manual
Product introduction Smok MAG P3 Mod is the newest rendition of Smok MAG series. It features an advanced IQ-M Chipset and 1.9 inches highly responsive touch screen that provides a new user interface and offers useful data information for easier operation. MAG P3 comes with a new hinged door to accommodate the IP67 waterproof, dustproof (IP67) and shockproof design. Parameters:
Size: 72.3x 36x 91.6mm
Modes: VW/ TC modes
510 thread connection
Power range: 1- 230 (VW) / 10- 230W (TC)
Temperature range: 200- 600℉/ 100- 315℃
Powered by dual 18650 batteries (not included)
Resistance range: 0.1- 2.5ohm (VW)/ 0.05- 2.0ohm (TC) Features:
-IP67 waterproof, dustproof (IP67) and shockproof design
-Exquisite small fire key and Micro USB 1.8A quick charging
-Intelligent atomizer recognition and puff monitoring system design
-10s cut-off/ short circuit/ over-heating/ low battery protection Package includes:
1x SMOK MAG P3 Mod
1x USB Cable
1x User Manual
Product introduction Dovpo Topside Dual Carbon Squonk Mod, powered by dual 18650 batteries with 200W max output, is a premium edition of the innovative Topside Dual Squonk Mod that still equipped with a 10ml large e-juice silicone bottle with easy top filling design. Taking the device to a new level involves the integration of the YiHi chipset. Within the unit, the squonk bottle can be filled from the top, after unscrewing a knurled and threaded top cap.
What’re the differences between the Topside Dual Mod?
Premium improvements to aesthetics and performance.
Created by design visionary Brian Herb from The Vapor Chronicles YouTube channel.
Partnering with YiHi for the chip adds a level of precision and performance that is unrivaled in the industry.
The new Carbon material is impermeable, highly resistant to scratching, very lightweight, smooth to the touch and absolutely beautiful looking. Parameters:
Size: 54x 42x 88.5mm
Voltage range: 0.8- 8.0V
Wattage range: 5- 200W
Bottle capacity: 10.0ml
510 thread connection
Resistance range: 0.1- 3.0ohm
Screen: 0.96 inch OLED
Working Mode: VW/ TC/ Bypass
Charging Current: 5V/ 2A
Powered by dual 18650 batteries (Not included) Features:
-0.96 inch OLED screen
-10ml large squonk bottle
-Large fire button for easy operation
-Dual 18650 batteries with 200W max output
-Top-fill squonk Mod for effectively proof-leakage Package includes:
1x Topside Dual Carbon Mod
2x 10ml Squonk Bottle Kit
1x Carbon Fiber Plate
1x Micro USB Cable
1x Accessory Bag
1x User Manual
Product introduction
Made from zinc alloy and PCTG, the ATVS Xipod Starter Kit comes with light weight in a tiny size, and it is durable. ATVS Xipod utilizes cotton coil, has stable heat conduction of cotton coil which brings purer taste. Works with built-in 650mAh lithium battery, Xipod kit has long standby time for your daily vaping. Parameters:
Capacity: 2ml
Size: 88x 31x 14mm
Charging time: 90mins
Material: Zinc Alloy & PCTG
Resistance: 1.0ohm cotton coil
Battery: built-in 650mAh lithium battery
Temperature range: 200℃/ 240℃/ 270℃ Features:
-Cotton coil, purer flavor
-Zinc Alloy & PCTG construction
-Powered by built-in 650mah battery Package includes:
1x Xi Pod Battery
1x Xi Pod Cartridge
1x USB Cable
1x User Manual
1x Warranty Card
Product introduction Crudo Hally TC Box Mod, with a fashionable scientific design appearance, powered by single 18650 battery, is able to reach up to a maximum output power of 60W. Available in TC and Full power output mode for different vaping needs. Plus the 0.96 inch OLED screen for vivid display and multiple automatic protection for safe vaping, Crudo Hally is worth a shot! Parameters:
Power range: 1- 60W
material: Zinc Alloy
Size: 77x 43x 24.5mm
Thread: 510 Connection
Standby current: <200uA
Display screen: 0.96 inch
Modes: TC/ Full power output mode
Powered by single 18650 battery (excluded) Features:
-0.96 inch OLED screen for vivid display
-Available in TC and Full power output mode
-Multiple automatic protection for safe vaping Package includes:
1x Curdo Hally Mod
1x USB Cable
Product introduction The RUi Starter Self-fill pod kit adopts lightweight metal frame with slim body. This device is powered by built-in 350mah battery and comes with 2ml pre-filled cartridge. Parameters: Pre-filled Pod
Capacity: 2ml
Coil: Ceramic
Size: 20 x 11 x 45.1mm
Nicotine Strength: 50mg/ml
Puffs: 350-400 puffs each pod
Rui Battery
Charging Voltage: 5V
Charging: Type-C port
Size: 85.6 x 20 x 11mm
Charging Current: 350mA
Battery Capacity: Built-in 350mAh
Available Puffs: 250-300 puffs at full power Features:
-Disposable cartridge for easy vape
-Powered by built-in 350mah battery
-Pre-filled Classic Tobacco and Mung Bean pod Package includes:
1* RUI Device
2* POD
1* User Manual
1* Type-C USB Cable
1* Quality Certification
1* Warning Card
Product introduction Smok Marshal G320 Box TC MOD features an advanced intelligent chipset, works with triple or dual 18650 batteries (Excluded) that delivers the 320W maximum output. Available in TC (Ni/Ti/SS/TCR) and VW modes, support Ni200 Nickel, Titanium, and stainless steel heating elements. Plus the 0.96 inch large top-style OLED display screen will inform you of essential parameters you need and bring you convenient operation. Parameters:
Modes: TC/ VW
Size: 89.5x 61.5x 31mm
TC: Ni/Ti/SS/TCR modes
Charge: Micro USB port
Thread: 510 connection
Screen: 0.96" OLED display
Wattage Output: Max 320W(Triple)/ 220W (Dual)
Temperature Range: 200℉–600℉/ 100℃–315℃
Battery: Triple or Dual 18650 batteries (Excluded)
Resistance Range: 0.1 -3ohm (VW) / 0.06 -3ohm (TC)
Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements Features:
-Compact and ergonomic design
-Optional Triple or Dual 18650 battery
-Support firmware updates via USB cable
-0.96 inch large top-style OLED display screen Package includes:
1x Marshal G320 MOD
1x Micro USB Cable
1x User Manual
Product introduction Advken Artha V2 RDA, made from food grade 304 stainless steel, features a unique adjustable mid airflow system that has three types of airflow control style (one side/ half hole double side/ full hole double side) to provide different flavors. The quadruple post build deck with a big hole of Artha V2 is very easy to build the coils. In addition, it included both resin drip tip and PEI drip tip for your option. Parameters:
Size: 24x 29mm
Material: 304 SS
Thread: 510 connection
Drip Tip: 810 drip tip
Airflow: Mid-airflow control
Build Deck: Quadruple post deck
Coil Building: Dual coil building Features:
-24K gold plated contact pin
-Three types of mid-airflow control
-Resin drip tip & PEI drip tip included
-High-end fashion with diamond pattern top cap
-Quadruple post with a big hole for easy building Package includes:
1x Artha V2 RDA
1x Accessory Bag
1x Spare 810 PEI Drip Tip
1x Flat-head Screwdriver
Product introduction
The Uwell Caliburn Pod Kit, constructed of zinc alloy and with 520mAh internal battery, is a finely-crafted pod system kit that combines a dual firing mechanism and utilizes Uwell’s proprietary Pro-FOCS flavor technology to maximize the effectiveness flavors.
Each Caliburn refillable pod has a 2.0ml nic salt e-liquid capacity and an atomizer resistance of 1.4 ohm. Each pod can use salt nicotine e-liquid and can be refilled with the removable tip. The drip tip also serves as a juice fill cover. Parameters:
Size: 110x 21.2x 11.6mm
Wattage output: 11W
520mAh internal battery
Voltage output range: 3.2- 4.0V
Resistance range: 1.2- 1.5ohm
Aluminum alloy construction
Draw-Activated Fault Mechanism
Built in Protections, Low Power Alert
Short Circuit Protection, 10 Second Cut Off Protection Features:
-Pro-FOCS Technology
-LED Battery Indicator
-Fixed side airflow holes
-Draw-to-fire or Push-to-fire
-Gold-Plated Snap-in Connection Package includes:
1x Caliburn Pod System
1x Caliburn Pod Cartridge
1x Micro USB Cable
1x User Manual
Product introduction Vsticking VKsma DIY Mode TC Mod Kit, works with internal 1400mAh battery, supports auto and DIY modes. It is equipped with an automatic bottle filling system to make a great ease of vaping with 3ml the e-juice capacity of container. It comes with the precise E-liquid control system, the excess e-juice will return to the tank automatic with no leaking. The rebuildable automatic drip atomizer (RADA) supports DIY the coils and adjustable airflow control. Features:
-Auto bottom filling to keep fresh e-juice
-1400mAh Built-in battery and 2 power modes
-DIY the coils and adjustable airflow control
-Equipped with YiHi Chip for stable performance Parameters: VKsma Mod
Chipset: YiHi Chip
Display: 0.69" OLED
Material: Zinc Alloy
Size: 79x 47.5x 18.6mm
E-liquid Container Capacity: 3.0ml
Working modes: DIY Mode (10- 35J)
Auto Modes: 0.3QNi211 P1 (10- 15W)/ P2 (20- 25W)
1.0QSS316 P1 (5- 6W)/ P2 (10- 12W)
Battery Capacity: Built-in 1400mAh battery
Temperate Control Range: 180- 260℃ (356- 500℉)
Charging Voltage and Current: Standard DC 5V/ 1A
SMI ADA (Auto Dripping Atomizer)
Size: 28.1x14 mm
Material: Brass+ PP
Coil: 1.0ohm SS316 coil,
0.3ohm Ni211 Ni-Mn alloy coil
Modes: Auto mode + DIY mode
SMI RADA(Rebuildable Auto Dripping Atomizer)
Size: 33.5x 15.5mm
Material: SS+ PEI
Support working mode: DIY MODE ONLY
TCR Setting: Ni211=0.00600, SS316=0.00088;
Ti01=0.00350; Ni200=0.00680
(Support TC coils only and the resistance is 0.2-1.0ohm) Package includes: ADA Version:
1x VKsma Kit
1x USB Cable
1x User Manual
1x VKsma Auto Dripping Atomizer
RADA Version:
1x VKsma Kit
1x USB Cable
1x User Manual
1x VKsma Auto Dripping Atomizer
1x VKsma Rebuildable Auto Dripping Atomizer
Product introduction E Boss Unicorn 80 VW Box Mod is an innovative vape mod to be added to the box mod lineup, it has distinctive graffiti design on the body and ergonomic design which is comfortable to grip. Works with single 18650 battery (Excluded), delivers a maximum power of 80W, available in VW/NI/SS/TI/VB/CCW six Modes for you to choose. In addition, including the HD OLED display screen that offers user interface data with a high-tech look and design. Parameters:
Output Power: 5~80W
Screen: HD OLED display
Mode: VW/NI/SS/TI/VB/CCW
Resistance range: 0.06-3.0Ω
Battery: 1x 18650 battery (Excluded) Features:
-Distinctive graffiti appearance
-Six different modes for your option
-HD OLED display offers user interface data Package includes:
1x Unicorn 80 Mod
1x User Manual
1x USB Cable
Product introduction OBS Alter 70W VW Pod Kit is a new portable pod system from OBS vape, it comes with Subohm & Nic salt base for both high/low package and it is compatible with M1 M3 NX SX coils at the same time. Powered by internal 2300mAh battery and will hit 70W maximum, which can meet your whole day vaping needs. The 2.5D toughened glass and zinc alloy construction makes Alter durable and delicate. The pod of Alter comes with 5ml/3.5ml E-juice and top-filling design which effectively avoids leakage problems.
Parameters: Battery:
Size: 44x 110x 25mm
Voltage range: 3.3-4.2V
Output wattage: 70W Max
Charge: USB Type C Port
Resistance range:0.1-3ohm
Material: zinc alloy + plastic
Battery: 2300mAh internal battery
Pod:
Capacity: 5ml/3.5ml
Airflow: adjustable airflow
Refilling: Top filling system
Connection: Magnetic connection
Subohm base:
E-juice capacity: 2ml & 3.5ml
Coil type: M1 coil 0.2ohm (50-70W), M3 coil 0.15ohm (50-70W)
For high power package
NicSalt base:
E-juice capacity: 5ml & 2ml
Coil type: NX coil 1.4ohm (8-12W), SX coil 0.15ohm (20-25W)
For low power package
Features:
-2.5D toughened glass
-2300mAh large battery capacity
-For both Nic salt and subohm coil
-Compatible with M1 M3 NX SX coils
-Economic design & 2.5D toughened glass
Package includes:
1 x Alter Mod
1 x Cartridge 5ml
(NX 1.4Ω Coil Pre-installed)
1 x Cartridge 3.5ml
(M1 0.2Ω Coil Pre-installed)
1 x Extra SX coil
1 x User Manual
1 x Type C cable
Product introduction Geekvape Lucid Kit, equipped with advanced AS chipset, is composed of a Lucid Box Mod and a Lumi Sub Ohm Tank. The Lucid Mod, powered by single 18650 battery, is able to reach up to a maximum output power of 80W. As for the Lumi Tank, it utilizes the innovative super mesh coil to produce outstanding flavor and vapor production. In a word, the Lucid Kit is suitable for both beginners and veterans. (Kindly note that the Mesh X1 Coil is pre-installed in the Lumi Tank, which is non-replaceable.) Parameters:
Power range: 5- 80W
Tank capacity: 4.0ml
Atomizer size: 24x 44.3mm
Kit size: 110(H)x 53(L)x 26(W)mm
Coil: 0.3ohm Mesh X1 (30- 45W)
(KA1 material, best 35- 40W)
0.69 inch OLED screen
Resistance range: 0.05- 3.0Ω
Charging current: 5V/ 1.5A
Modes: TC (Ni200/ Ti/ SS/ TCR)/ VPC/ Bypass
Temperature range: 100- 315℃/ 200- 600℉
Powered by single 18650 battery (Not included) Features:
-Easy top refilling design
-Adjustable bottom airflow
-Equipped with advanced AS chipset
-Powered by single 18650 battery with 80W max output
-USB cable for charging & firmware upgrade
-Lumi tank is built with FDA certified medical grade polycarbonate Package includes:
1x Geekvape Lucid Mod
1x Lumi Disposable Tank
(0.3ohm Mesh Coil Pre-installed)
1x USB Cable
1x User Manual
1x Spare Parts Pack
