$2.99: Sense Blazer 200 Sub Ohm Tank
Product introduction
The Sense Blazer 200 Tank is the pinnacle of performance achievement offered by the illustrious designers of the Herakles series. It comes with a large juice well of 6ml capacity, filled via an innovative hinged top-fill slot. With the introduction of 0.2ohm Triple Tri Parallel Coil, it’s capable of outputting an impressive range of 60 to 200W. Also included within each kit is the 0.6ohm Ceramic Coil, combining three of the 1.8ohm dual parallel vertical structures into one unit, surrounded by cotton wicks and ceramic heating element.
Parameters:
Material: SS
Diameter: 25.5mm
E-Juice Capacity: 6.0ml
Airflow: bottom airflow
Refill: Top-refill system
Copper plated 510 connection
Drip tip: 12mm Delrin Drip Tip
Coils: 0.2ohm sextuple coil- rate for 60-200W
0.6ohm ceramic coil- rated for 50-100W
Features:
-Sextuple and ceramic coils are included
-Innovative flip top-fill design with hinge lock
-Superior SS construction with copper-plated 510 connection
Package includes:
1x Blazer 200 Sub Ohm Tank
1x 0.2ohm Sextuple Coil
1x 0.6ohm Ceramic Coil
Spare parts
NEW: $13.99 THC Tauren X Chip for Tauren Mod and Tauren Max Mod
Product introduction
The THC Tauren X Chip is the world’s 2 in 1 and removable design chipset. It controls the power output based on the current battery state and supports mech mode and smart protection mode. Compatible with Tauren Mod and Tauren Max Mod.
Note: It can’t use together with the THC Extension Tube.
Parameters:
Voltage Range: 3.2V - 4.2V
Resistance Range: 0.1- 2.5 Ohm
Fit for: THC Tauren Mod and Tauren Max Mod
Features:
-2 in 1 and removable design
-Supports two modes and many protections
Package includes:
1x THC Tauren X Chip
ONLY $25: VSTICKING VK530 200W TC Box Mod
Product introduction
VSTICKING VK530 Mod, powered by dual 18650 batteries, is able to reach up to a maximum output power of 200W. The VK530 comes with the TFT IPS HD screen that displays all the primary information for you reference, and it can customize 5-10 your own wallpapers.
Besides, the VK530 Box Mod utilizes the YiHi SX530 chip with SXI-Q control system to suit your own taste. There are multiple modes for you option including low voltage& resistance protection, high input voltage protection, temp overheat protection and so on.
The temperature control suite supports SS316L, Ni200, Ti01, SX Pure and Manual TCR Ni. VSTICKING VK530 adopts the new output mode is Joule mode that has an atomizer range of 0.05ohm to 1.5 ohm and standard resistance is 0.06 to 1.0 ohm.
Parameters:
TFT IPS HD Screen
Powered by YiHi SX530 chip
Output power: 5- 200W
Output voltage: 1.0- 9.5V
TCR value: 0.0005-0.007
Output joule: 212- 572℉/ 100- 300℃
Standard resistance: 0.15- 3.0ohm
Joule mode resistance: 0.15- 1.5ohm
Powered by dual 18650 batteries (Not included) Charging via USB cable
Temp Control with SS316L/ Ni200/ Ti 01/ SX Pure/ Manual TCR
Flavor mode: Powerful, Powerful+, Soft, Standard, and SXi-Q-S1
New innovative tech: SXi-Q control system–customize your own taste Customize your own wallpaper; Connected the SXi driver.
Protection modes:
-Low voltage& resistance protection
-High input voltage protection
-Temp overheat protection
-Output short circuit protection
-Reverse battery protection
Package includes:
1x VSTICKING VK530 Box Mod
1x User Manual
NEW: ThunderHead Creations Tauren Max Hybrid 2in1 Mech Mod (X Chipset)
Product introduction
ThunderHead Creations Tauren Max Hybrid Mech Mod (X Chipset) is equipped with the creative removable X-chip that power output based on the current battery state, supports mech mode and smart protection mode, and has many protections. Works with single 18650/20700/21700 battery (Excluded) and the unique “ball” construction firing switch of Tauren Hybrid mod realities the 360 degrees arcless constant contact design which is an expertly constructed mechanical mod.
Parameters:
Size: 26x 95mm
Chip: Removable X-chip
Voltage Range: 3.2V - 4.2V
Resistance Range: 0.1- 2.5 Ohm
Connection:Hybrid 510 Connection
Battery: Single 18650/20700/21700 battery (Excluded)
Protections: Short circuit/ High temp/ over-time/ low voltage/ reverse polarity
Features:
-2 in 1 design w/ removable X-Chip
-Mech mode and smart protection mode
-Liquid proof/ dustproof/ shockproof
-Creative “ball” construction firing switch
-Supports 18650/20700/21700 battery and many protections
Package includes:
1x Tauren Max Hybrid Mech Mod
1x 18650 Adapter
1x Tauren Wrench
1x Aluminum Case
1x User Manual
Really frustrated with your free shipping not functioning. Your CS didn’t react and now the YK530 in black is sold out and still no answer.
That’s frustrating.
In Stock: Asvape Hita Mech Pod Kit
Product introduction
Asvape Hita Mech Pod Kit is a new-design mech pod mod kit and it has a 510 adapter to match the 510 thread atomizer. Equipped with a smart chip and 1000mAh internal battery, Hita comes with colorful LED indicator lights to display the battery status and is charged by convenient type-C port. The refillable 3.0ml pod of Hita Kit supports two mesh coils and an RBA coil for DTL and MTL vaping.
Parameters:
Size: 91.5x 25mm
Chipset: Smart chip
E-juice capacity: 3.0ml
Refill: Side fill system
Charging port: Type-C port
Display: LED indicator light
Battery: 1000mAh internal battery
Coils: 1.0ohm mesh coil; 0.5ohm mesh coil; RBA coil
Features:
-Pocket-friendly design
-Convenient Type-C quick charge
-Available in DTL and MTL vaping
-Supports both Mesh coil and RBA coil
-Has 510 adapter to match the 510 thread atomizer
Package includes:
1x Asvape Hita Mech Pod Kit
Assecorries
New: Freemax AutoPod50 VW Pod Kit
Product introduction
Freemax AutoPod50 VW Pod Kit is the first dual mesh coil pod kit, features a powerful 2000mAh battery with adjustable output from 5w to 50w. The Freemax AutoPod50 Cartridge comes with 4.0ml capacity, adopts the latest COILTECH 4.0 coils for massive vape and great flavor.
Parameters:
Output Wattage: 5-50W
Size: 43.5x 24.5x 94mm
E-juice Capacity: 4.0ml
Output Voltage: 0.7-7.5V
Battery Capacity: Internal 2000mAh battery
Coil Material: FeCrAl/PCTG/SS904L/Tea Fiber Cotton
Coil Resistance: Autopod50 AX2 Mesh Coil 0.25ohm (30-50W, Best 40W)
Autopod50 AX2 Mesh Coil 0.5ohm (15-35W, Best 30W)
Features:
-The first dual mesh coil pod kit
-Adjustable output from 5W to 50W
-Advanced AX2 coil for massive vape and great flavor
-Powerful 2000mAh battery with 2A type-c quick charge
Package includes:
1x Autopod50 Device
1x Autopod50 Pod (Freemax Autopod50 AX2 Mesh Coil 0.25ohm)
1x Extra Autopod50 AX2 Mesh Coil 0.5ohm
1x Silicon Protection Case
1x Type-C USB Cable
1x Warranty Card
1x Warning Card
1x User Manual
Cheap Deal: Digiflavor Lunar Mod $6.59
Product introduction
Digiflavor Lunar Mod is a dual 18650 mod powered by the AS chipset and compatible with coils as low as 0.1ohm. Built with high grade ultra-lightweight ABS material which increases impact and heat resistance. Three power output modes are available to match your personal preference.
Parameters:
Material: ABS
Modes: Bypass (3.2- 3.5V)
Powered by dual 18650 battery (Not included)
Features:
-Adopts advanced AS chipset
-high grade ultra-lightweight ABS material
-Low voltage protection, Reverse protection
-Timeout protection, Low resistance protection
-Supports bypass mode (Green lights) & VW modes (3.5V blue lights, 3.2V red lights)
-RGB power indicators (two clicks on the fire button: Green lights 70- 100%, Blue lights 31 -69%, Red light 0- 30%
-Can work with dual 18650 batteries or Single battery (Single battery has to put in the A slot-under the atomizer)
Package includes:
1x Lunar Box Mod
1x User Manual
Spare Parts
Warning:
- Please install higher power battery in the Battery Slot A.
If battery power in Slot B is higher than Slot A,then Blue and Green light will shine alternately 4 times to remind you to exchange the batteries. - Lunar mod comes in parallel, so single battery can work in Slot A, but can’t work in Slot B!
- Please note that the Lunar mod can’t be charged by USB cable. So there is no USB cable included!
- The Mod will turn off whenever the fire button is being pressed for more than 30 seconds.
Cheap Deal: SXK Sword 50W mod Kit $9.99
Product introduction
The SKX Sword Kit is a new all in one kit (mod, tank, and internal battery) that is sure to wow you with its 1450mAh capacity with TC in its amazingly compact form factor. The SXK Sword Kit can read resistances down to 0.08 and with the included Scabbard tank, is sure to make a nice addition to any vapers collection.
The Sword stands in at an astonishing 63mm tall and incorporates an internal battery. Its battery is charged via an included micro USB and is the perfect size for vaping on the go. Aesthetically speaking, the Sword is a petite piece of art!
The mod can also be fired in the following modes: Watt Mode, Mech Mode, Temp SS (Stainless steel), Temp Ti (Titanium), and Temp Ni (Nickel). In temperature control mode, it can be fired at up to 600°F. 3 clicks of the fire button will get you into the menu which allows you to select which mode you fire in.
Included in this kit is the Scabbard Tank, the perfect companion for the Sword Mod! The Scabbard Tank features dual adjustable airflow inlets on the base of the tank which can be adjusted based on user preference. The Scabbard features a Delrin insulated drip tip to minimize any transfer of heat to your mouth.
Features:
-Maximum wattage output: 50.0 watts
-Internal battery capacity: 1500mAh
-Atomizer resistance range: 0.08- 3.0 ohm
-Input battery voltage range: 3.3- 4.2 volts
-Maximum output voltage: 8.4 volts
-Maximum output current: 15 amps
-Short circuit protection
-High temperature protection
Contents:
1x SKX Sword 50W Mod
1x SKX Scabbard Tank
1x 0.5 Scabbard Tank coil pre-installed
1x 0.5 Scabbard Tank coil spare
Micro USB for charging
$20.99: Ultroner Mini Stabilized Wood Stick Semi Mech Mod
Product introduction
The Ultroner Mini Stick Mod is a high end 18350 mechanical device that is constructed from stainless steel and beautiful stabilized wood. The fire button is made from Ultem. The mod comes with a lanyard that makes it easy to be carried.
Note: Each stabilized wood mod is made from genuine maple and will contain natural imperfections. Color difference from unit to unit and pictures are depicted for general visualization purposes.
Parameters:
Chip: DNA chipset
Ultem PEI fire button
510 thread connection
Resistance range: 0.1- 3.0ohm
Material: Metal & stabilized hybrid wood
Powered by single 18350 battery (Not included)
Features:
-Over-voltage protection
-Over-temperature protection
-Time protection, Negative polarity
-Stabilized wood, with the natural grain and super hardness
Package includes:
1x Mini Stick Mech Mod
1x Warranty Card
1x User manual
You should advise that you stopped offering free shipment as I was informed by your customer service.
And maybe you want to update your website accordingly.
Otherwise no hard feelings, you have nice products.
NEW: VOOPOO Drag Mini Refresh Edition Kit W/ PNP Tank
Product introduction
VOOPOO Drag Mini Refresh Edition Kit includes the Voopoo Drag Mini TC Box Mod and VOOPOO PNP Tank. Comes with the Gene Fit chip and powered by 4400mAh built-in battery, Drag Mini Refresh Edition Kit provides the high performance and multiple protections.
The PNP Tank is a 2in1 pod atomizer that is compatible with drag s and drag x pod mod and is a 510 thread sub-ohm tank. It features 4.5ml e-juice capacity with bottom refill system, bottom adjustable airflow, and is compatible with all PnP coils.
Parameters:
Drag Mini Mod
Output: 5- 117W
Output Current:0- 30A
Output Voltage: 0- 7.5V
Resting Current: ≤10uA
4400mAh built-in battery
Size: 81.5x 48.5x 25.5mm
Material: Zinc Alloy & Resin
Resistance Range: 0.05- 5.0ohm
Temperature Range: 100- 315℃/ 200- 600℉
VOOPOO PNP Tank
Diameter: 26x 50mm
Material: SS+ PCTG
E-juice Capacity: 4.5ml
Filling: Bottom filling
Airflow: Bottom airflow
Coils (Included): 0.3ohm PnP-VM1 coil/
0.15ohm PnP-VM6 coil
Features:
-OLED screen display easy to read
-Aesthetic specular finishing unique resin plates
-Innovative GENE.FIT chip with multiple protections
-Magnetic pod for Drag s/ x or 510 tank 2 in 1 design
-Compatible with all PnP coils and infinite airflow system
Package includes:
1x Drag Mini 117W Mod
1×PnP Pod Tank (4.5ml)
1×PnP-VM5, 0.2ohm
1×PnP-VM6, 0.15ohm
1x Micro USB Cable
1x User Manual
In Stock: Asmodus EOS II 180W Stablized Wood TC Box Mod
Product introduction
The EOS II Box Mod, a collaboration between Asmodus and ULTRONER, features the GX-180-UTC chip set that packs a punch and saves battery life. With the new chip set equipped, vapers can personalize their device according to their liking from changing the color of the screen.
Powered by dual 18650 batteries, the EOS II is able to reach up to a maximum output power of 180W. The EOS supports Soft, Normal and Hard firing modes, and is composed of beautiful stabilized wood, acrylic/resin on a lightweight aluminium frame to make a feather-like mode.
Note: Each stabilized wood mod is made from genuine maple and will contain natural imperfections. Color difference from unit to unit and pictures are depicted for general visualization purposes.
Parameters:
Chip set: GX-180-UTC
Wattage range: 5- 180W
Maximum wattage output: 7.5V
Coil resistance range: 0.1- 3.0ohms
Display: IPS captive touch screen
Accommodates atomizers up to 26mm
Material: Aluminium frame+ Stabilized wood
Powered by dual 18650 batteries (Not included)
Features:
-Constructed from aluminum and stabilized wood
-Powered by dual 18650 batteries with 180W max output
-USB Type-C power port for firmware upgrade and charging
-Full color IPS touch screen displays all pertinent vaping data in a clear, aesthetically pleasing way
Package includes:
1x EOS II Box Mod
1x Velvet Carrying Bag
1x Wood Buffering Tool
1x User Manual
NEW: Vapor Storm V-PM 40 Pod Mod Kit
Product introduction
Vapor Storm V-PM 40 Pod Mod Kit is the lightest weight pod mod in the current market which only 40g. It works with an external 18650 battery and provides 5 to 40W adjustable working voltage. The 0.96 inches colorful TFT screen will display the battery level, resistance, puffs, etc. Additionally, V-PM 40 Pod Mod kit also has various protections to ensure safe vaping.
Parameters:
Size: 119x 33x 28mm
Output mode: Power
Tank Capacity: 4.8ml
Output wattage: 5-40W
Resistance: 0.18-2.5ohm
Charge: 1A, Micro USB port
Screen: 0.96 inches of screen display
Battery: 1x 18650 battery (Excluded)
Protections: low/ high resistance, over-heating,
short circuit, over-charge/ over-discharge protection
Features:
-The lightest weight pod mod
-0.96 inch colorful TFT screen
-Single 18650 battery with 40W output
-Various protections to ensure safe vaping
Package includes:
1x V-PM 40 Pod Mod
1x V-PM 40 Pod Tank
1x 0.35ohm coil
1x 0.6ohm coil
1x Charge cable
1x User manual
NEW: Smok SCAR-P18 Box Kit with TFV9 Tank
Product introduction
Smok SCAR-P18 Box Kit is a new Box Kit from Smok tech which is consists of SCAR-P18 Box mod and TFV9 Tank, features a waterproof, shockproof, dustproof body, and is powered by dual 18650 battery with 230W max output.
Features:
-Waterproof, shockproof, dustproof
-Dual 18650 battery with 230W max output
Package includes:
1x Smok SCAR-P18 Box mod
1x Smok TFV9 Tank
1x User manual
NEW: VOOPOO Drag 2 Refresh Edition Kit W/ PNP Tank
Product introduction
VOOPOO Drag 2 Refresh Edition Kit includes the Voopoo Drag 2 TC Box Mod and VOOPOO PNP Tank. Comes with the Gene Fit chip and powered by dual 18650 battery (Not include), Drag 2 Refresh Edition Kit provides the high performance, multiple protections and with a maximum output power of 177W. The mod equips with a crystal OLED display to show parameters of device such as mode, resistance, voltage, and wattage.
The PNP Tank is a 2in1 pod atomizer that is compatible with drag s and drag x pod mod and is a 510 thread sub-ohm tank. It features 4.5ml e-juice capacity with bottom refill system, bottom adjustable airflow, and is compatible with all PnP coils.
Parameters:
Drag 2 Mod
Size: 88.3x 51x 26.5mm
510 thread connection
Highly Advanced GENE FIT Chip
Wattage Output Range: 5- 177W
Voltage Output Range: 0- 7.5V
Temperature Range: 200- 600°F/ 100- 315°C
Powered by dual 18650 batteries (Not included)
Resistance range: 0.05- 3.0ohm (Power Mode); 0.05- 1.0ohm (TC Mode)
Supports Ni200, Titanium, Stainless Steel Compatibility
VOOPOO PNP Tank
Diameter: 26x 50mm
Material: SS+ PCTG
E-juice Capacity: 4.5ml
Filling: Bottom filling
Airflow: Bottom airflow
Coils (Included): 0.3ohm PnP-VM1 coil/
0.15ohm PnP-VM6 coil
Features:
-Intuitive OLED Screen display data
-Dual external 18650 with TCR Adjustments Mode
-Innovative GENE.FIT chip with multiple protections
-Magnetic pod for Drag s/ x or 510 tank 2 in 1 design
-Compatible with all PnP coils and infinite airflow system
Package includes:
1x VOOPOO Drag 2 Mod
1×PnP Pod Tank (4.5ml)
1×PnP-VM5, 0.2ohm
1×PnP-VM6, 0.15ohm
1x Micro USB Cable
1x User Manual
$37.39: Smok SCAR-P3 Pod Kit
Product introduction
Smok SCAR-P3 Kit is a waterproof, shockproof, dustproof pod kit. It is powered by an internal 2000mAh battery and can be charged by the convenient type-C charge port.
Features:
-Convenient type-C charge port
-Waterproof, shockproof, dustproof
Package includes:
1x Smok SCAR-P3 Kit
1x User manual
NEW: Geekvape Boost Plus 18650 Pod Mod Kit
Product introduction
Geekvape Boost Plus Pod Mod Kit is the upgrade of the Geekvape Boost Pod Mod Kit. It is powered by an external single 18650 battery and features a triple system. The removable drip tip allows you to change to other drip tips you like. And it remains the shock-proof, water-proof, dustproof functions absolutely. The 0.96-inch TFT color screen will display the data you need.
Parameters:
Size: 114.2x 49.5x 28.6mm
Pod Capacity: 5.5ml
Firing Speed: 0.08s
Wattage Output Range: 5~40W
Resistance Range: 0.1~3.0ohm
Voltage Input Range: 3.2~4.25V
Longest Output / Vaping Time: 10s
Charger Voltage: Micro USB 5V / 2A
Temperature Control Range: 200~600’F
Screen: 0.96-inch TFT Color Display Screen
Material: Zinc Alloy + Plastic + Silicone + Leather
Battery Type: Single High-Amp 18650 Battery (Not included)
Features:
-Shock-proof, waterproof, dustproof
-0.96-inch TFT Color Display Screen
-Triple system and 0.08s Firing Speed
-Adjustable airflow and removable drip tip
-External single 18650 battery with 40W output
Package includes:
1 x Aegis Boost Plus Device
1 x Aegis Boost Plus Pod
1 x 0.4ohm KA1 Mesh Coil
1 x 0.6ohm KA1 Mesh Coil
1 x Drip Tip
1 x Coil Tool
1 x USB Cable
1 x Warranty Card
1 x User Manual
$39: OXVA X Pod System Kit
Product introduction
OXVA X Pod System Kit is the first RDA-flavor pod system. It is powered by an internal 1600mAh battery with 40W max output. Equipped with the advanced Photon chip, OXVA X features auto-detect function, five power options, burnt proof, and multiple protections. The OXVA X Pod is compatible with the UNI coils, includes two mesh coils, one regular coil, and the RBA coil (Sold separately).
Parameters:
Size: 31x 18x 107mm
Pod capacity: 2.0ml
Output wattage: 5-40W
Charger: 2A, Micro USB port
Battery: 1600mAh internal battery
Compatible coils: 0.3ohm mesh coil,
0.5ohm mesh coil, 1.0ohm regular coil, RBA coil
Protections: Switch timeout/ short-circuit/
overcharge/ over-discharge/ over current protection
Features:
-Support DTL and MTL vaping
-Five power options and burnt proof
-Advanced Photon chip with auto-detect function
-Compatible with UNI sub-ohm coils and RBA coil (Not included)
Package includes:
1x OXVA X device
1x OXVA X pod
1x OXVA unicoil 0.3ohm (Mesh)
1x OXVA unicoil 0.5ohm (Mesh)
1x USB cable
1x Warranty card
1x Attention card
1x User manual
$21.99: asMODus Rose Finch Mech Mod
Product introduction
asMODus Rose Finch Mech Mod comes with a full copper body and silver-plated contacts to provide maximized conductivity. The firing switch is powered by high-quality Earth magnets which provide a solid firing mechanism.
Parameters:
Diameter: 24.5mm
510 threading connection
Levitating Firing Button
Full brass body for maximized conductivity
Powered by 1 x 18650 sized battery (not included)
Firing switch is powered by high-quality Earth magnets
Floating top pin for easy accommodation and switching of atomizers
Package includes:
1x asMODus Rose Finch Mech Mod (no cells)
1x User manual
