NEW: Uwell Caliburn G Pod System Kit
Product introduction
Uwell Caliburn G is an upgrade version of Caliburn, with a pocket-friendly single button layout design provides a
simple interface, plus an easy-to-use open pod system,it is flavor-focused Pod System kit,which powered by 690mAh
built-in battery and can fire up to max 15W output.Caliburn G cartridge can hold of 2ml capacity with top-fill and
leakproof design supports two different airflows,one is restricted DTL vaping and another one is MTL vaping.Making it
a perfect start for beginner vapers
Parameters:
Size: 108.3 x 22.5 x 12.6mm
Pod Capacity: 2ml
Output: Max 15W
Charging: 1.5A
POD Capacity :2ml
Battery: 690mAh battery built-in
Features:
-5 clicks to lock/unlock
-Efillable pod and removable coil, cost-effective to use
-Type-C port
-Different airflows, ingenious airway design
1）if the air inlet of the pod and the air inlet of the device are close to each other, the airflow is suitable for
restricted DTL；
2）if the air inlet of the pod and the air inlet of the device are far away from each other, the airflow is suitable
for MTL vape.
-Direct vape or buttom vape, easy to use
-690 mAh battery With 2ml capacity
Package includes:
1 x Uwell Caliburn G Kit
1 x Uwell Caliburn Pod Cartridge
1 x USB Type-C Cable
1 x User Manual
NEW: IJOY PikGo 23W starter kit & IJOY PikGo D18 Starter 23W KIT
IJOY PikGo 23W starter kit 1300mah
Product introduction
iJoy PikGo is a real starter kit for easily operation and safe to use.Ultra portable and lightweight,powered by bulit-in 1300mAh battery,with Type-C fast charging.It equipped with Univ.mini chipset,and intelligent auto-match technology,3 output modes optional.Transparent mesh pod sealed by ultrasonic technology for leaking-proof,easy top-fill and side adjustable airflow valve design.
IJOY PikGo D18 Starter 23W KIT 1000mah
Product introduction
iJoy PikGo D18 is a real starter kit for easily operation and safe to use.Ultra portable and lightweight,bulit-in 1000mAh battery with max 23w output long-lasting.Univ.mini chipset inside with intelligent auto-match technology.Transparent mesh pod sealed by ultrasonic technology for leaking-proof,easy top-fill and adjustable airflow design.Easy top-fill design.
$10.99: Cool Vapor Takit Mini V2 Mech Mod
Product introduction
Cool Vapor Takit Mini V2 Mechanical Mod, a durable and beautiful mech mod which is crafted from superior stainless steel and resin. Included an extension tube that is compatible with 18650 or 18350 battery(Batteries are excluded), the max power is 60W and 30W. The lanyard and adapter loop can match 22mm or 24mm atomizers in the market.
Parameters:
Size: 24x 78 mm
Input voltage: 3.3-4.2V
510 threading connection
Material: Stainless steel+ resin
Power: 18350 Max. 30W/18650 Max. 80W
Powered by single 18350 or 18650 battery (Excluded)
Resistance range: 0.5-3ohm (18650) / 0.3-3ohm (18650)
Features:
-Compatible with 22 or 24mm atomizers
-Powered by 18350 or 18650 battery (Excluded)
-Durable and beautiful SS and resin construction
Package includes:
1x Takit Mini V2 Mod
1x Extension Tube
1x Beauty Ring
1x SS Lanyard
SPECIAL OFFER: ULTRONER X DJV MECHA HYBRID STABILIZED WOOD MECH MOD
Product introduction
Ultroner x DJV Mecha Hybrid Mech Mod is the latest collaboration between Ultroner and Dejavu. Constructed from premium quality brass and stabilized wood chassis, the Mecha is a single 18650 battery tube mod with beautiful color. Including spring and magnet switch for different hand feel and the hybrid 510 threading connection match most atomizer in the market.
Parameters:
Size: 25x 87mm
510 thread connection
Material: Brass+ stabilized wood
Single 18650 battery (Not included)
Fire button: Stainless Steel or acrylic
Features:
-Combination of Ultroner and Dejavu DJV
-Spring or magnet switch for different hand feel
-Premium quality brass and stabilized wood chassis
Package includes:
1x DEJAVU DJV Mecha Mech Mod
1x Alloy Knurling Sleeve (Assembled)
1x DJV Camouflage Bag
1x Polyacetal Sleeve
1x Spring (Assembled)
1x Accessories Pack
2x Stickers
1x Magnet
Launched! GeekVape Aegis Hero Pod Mod Kit 1200mAh
Product introduction
Geekvape Aegis Hero is a sub ohm pod mod kit which is powered by a 1200mAh battery with a 45W max output, users can adjust the power of the device to correspond with their ideal vaping preference.A lightweight box mod construction provides a durable, yet pocket-friendly design with an ergonomic leather patch grip providing comfort when in use. Equipped with IP67 waterproof and shockproof capabilities, the Aegis Hero is a resilient device.4ml Hero replacement pods feature a practical top fill method which reduces the chance of leakage. The sleek adjustable airflow features gives users complete control over inhalation, whilst the push fit coil installation makes inserting and replacing coils an easy, hassle free process.A removable coil method allows for an eco-friendly and cost-effective method of vaping.Geekvape Aegis Hero compatible with the G coil series, with a 0.4 Ohm mesh coil and 0.6 Ohm mesh coil included, we recommend pairing these with high VG e-liquids of 50% and above for best performance.A 0.42 Inch OLED screen displays essential vaping data and output modes, with the operational buttons adjacent to the screen allowing users to navigate variable wattage and bypass mode.
Parameters:
Dimension: 48.15 x 25.4 x 82.9mm
Capacity:4ml
Output Power:5-45W
Display Screen: 0.42 Inch OLED
Filling: Top Fill
Battery: 1200mAh Built in
Airflow: Adjustable Airflow
Drip Tip Type: 510 Drip Tip
Resistance Range: 0.1-3ohm
Coil Resistance:0.4ohm, 0.6ohm
Mode:Power/Bypass
Charging Voltage: 5V/1.5A
Features:
-Sturdy Box Mod Design
-0.42 Inch OLED Display Screen
-Compatible with G Coil Boost Series
-Powered by 1200mAh Built in
-Removable Coil Method
-Adjustable Airflow,Top Fill
-IP67 Waterproof & Shockproof Capabilities
Package includes:
1 x Geekvape Aegis Hero Pod Device(4ml)
1 x Geekvape Aegis G Coil Boost 0.4 Ohm Mesh(25-33W)
1 x Geekvape Aegis G Coil Boost 0.6 Ohm Mesh(15-25W)
1 x Drip Tip
1 x Coil Tool
1 x User Manual
1 x USB Charging Cable
Launched! Geekvape Zeus Nano tank 3.5ml
Product introduction
Geekvape Zeus Nano tank incorporates a high dynamic top-to-bottom airflow with excellent leakproof design,combined with Geekvape B series Coil engineerd to provide the flavor satisfication you deserve.Geekvape Zeus Nano Tank is the most reliable leakproof tank, provides MTL and DTL vaping experience for vapors,with 510 drip tip.
Parameters:
Size: 22 x 56.55mm
Pod Capacity: 3.5ml(Spare tube glass 3.5ml)
Coil: Geekvape B series Coil 0.4ohm(25-33W)
Geekvape B series Coil 0.6ohm(15-25W)
Filling Method: Top filling design
Drip Tip: 510
Features:
-Top-to-bottom airflow
-Eexcellent leakproof design
-Combined with Geekvape B series Coil
-MTL and DTL vaping experience
-510 drip tip
Package includes:
1 x Geekvape Zeus Nano Tank (Pre-installed:Geekvape B series Coil 0.4ohm.25-33W)
1 x Geekvape B series Coil 0.6ohm.15-25W
1 x Drip Tip
1 x Coil Tool
1 x User Manual
1 x Spare parts pack
1 x Spare Glass tube(3.5ml)
Coming soon! Vaporesso FORZ TX80 Box Kit with FORZ Tank
Product introduction
Vaporesso FORZ TX80 Kit is waterproof, shockproof, and dustproof with all around protections.Powered by a 18650 battery that features adjustable output power range from 5 to 80W.Combined with the unmatched capabilities of the AXON 2.0 chipset,provide up to 80 watts of output power,adopts the unique F(t) mode,which can change the output voltage and heating rate within a certain period of time, covering a wider temperature range to ensure that the e-liquid is highly decomposed,achieve an unprecedented leap in flavor release. Vaporesso FORZ Tank 25 holds 4.5ml juice capacity with replaceable coil system,provides threaded top filling,dual filling ports, screw to fill, safer e-liquid filling way.In addtion,FORZ Tank 25 is compatible with GTR 0.15ohm Mesh Coil and GTR 0.4ohm Mesh Coil, which are designed with anti-bacteria organic cotton, a larger airway, and an updated leak-proof structure, making each puff an impressive one.The Pull & Push coil replacement brings easiness to the user’s operation.
Parameters:
Size: 84.6mm x 30.1mm x 41.7mm
Capacity: 4.5ml
Battery:Single 18650(not included)
Output Power: 5-80W
Resistance: 0.03-5.0ohm
Charging : DC 5V/2A Type-C
Display: 0.69’’ OLED Screen
Coils: GTR 0.4ohm MESH Coil (40-60W)/ GTR 0.15ohm MESH Coil (60-80W)
Chipset: AXON Chip 2.0
Thread: 510
Features:
-Water-proof, Shock-proof, and Dust-proof
-AXON CHIP 2.0 with innovative F(t) MODE
-5V/2A Type-C charging port,0.69-inch OLED screen
-Brand New Sub-ohm Tank - Forz Tank 25
-Powered By Single 18650 Battery with adjustable output power from 5 to 80W
-4.5ml Tank, covered by fiberglass plastics & high tenacity soft-rubber, with a silicone Drip Tip Cover
-GTR Coil Platform with Antibacterial Organic Cotton and Leak-proof Structure
-Top refill with large airways for DL vape
Package includes:
1 x FORZ TX80 MOD
1 x FORZ TANK 25 (4.5ml)
1 x GTR 0.15Ω MESH Coil (pre-installed)
1 x GTR 0.4Ω MESH Coil (inbox)
1 x Screwdriver
1 x USB Silicone Plug
1 x Silicone Drip Tip Cover
1 x FORZ Badge
4 x O-ring
1 x Glass Tube
1 x Type-C USB Cable
1 x User Manual
1 x Warranty Card
NEW! Voopoo DRAG MAX Vape Kit 177W Dual 18650 Pod Mod Kit
Product introduction
DRAG Max is an epoch-making dual-battery device with magnetic atomizer.Powered by two external 18650 batteries to provide long-term standby energy and maximum 177W power output provided by GENE.FAN 2.0 chip which has stronger
explosive power, more stable output and richer intelligent functions than the previous generation…With the durable zinc alloy structure and the surface covered the soft and gentle leather element to give you a luxurious and comfortable holding experience.Equipped with a fast-charging system, 5V/2A Type-C fast charging can increase the charging speed by 50%.
Parameters:
Size:122mm x 50.25mm x 25mm
Capacity: 4.5ml
Mod Material: Leather + Zinc Alloy
Pod Material:PCTG
Battery: Dual 18650 batteries(not included)
Output Power: 5-177W
Resistance range: 0.1-3.0ohm
Display: 1.08" TFT Color Screen
Charging Type: Type-C 5V/2A
Resistance:0.2Ω (PnP-VM5,40-60W), 0.15Ω (PnP-VM6,60-80W)
Output voltage: 6.4-8.4V
Filling : Bottom Fill
Features:
-5V/2A Type-C Fast Charging
-Dual UI Theme Interfaces
-Create Magnetic Vape Moment
-Stay Powered for All-day Long
-Powered by Dual 18650 Batteries with Max 177W Output
-GENE.FAN 2.0 chip which has stronger explosive power, more stable output and richer intelligent functions
-Supports the easy-to-use SMART mode and the power-free RBA mode
-1.08’ TFT color screens, which are practical and beautiful
-Compatible with all PnP coils including RBA
-Suitable for Multiple PnP Models(PnP Pod/PnP MTL Pod/PnP RTA Pod)
Package includes:
1 x DRAG Max Device
1 x PnP Pod (4.5ml)
1 x PnP-VM5, 0.2ohm
1 x PnP-VM6, 0.15ohm
1 x Type-C Cable
1 x User Manual
Pre Order: SXK Supbox Sevo 70W Box Kit
Product introduction
SXK Supbox Sevo 70W Box Kit compatible with more than 90% of original accessories of Billet Box Pod Kit,comes with a 510 connector allowing standard tanks up to 24mm in diameter to be fitted as well as being able to be used with either an 18650 or 18350 battery which gets rid of the tube giving the device quite a different look.SXK Supbox Sevo 70W Box Kit have 5 modes of operation,Pod Mode,Tank Mode, Universal Mode,18650 mode,18350 mode.The Supbox Pod Tank which is compatible with RPM coils and the Uni Tank.The Display is bright and gives the most important information.SXK Supbox Sevo 70W Box Kit supports on-board charging and firmware upgrades via the micro USB port using the supplied cable.
Parameters:
Size: 53 x 31 x 96mm
Chipset: Sevo 70w
Capacity: 5ml
Resistance: 0.6/1.1ohm
Resistance range 0.8-3ohm
Display:Screen: 0.96 "
Output: 1-70W
Battery :Single 18650 (Not Included )
Modes:Modes: Mode: VW / Mech (Bypass) / TC (NI-TI-SS)
Features:
-Powered by single 18650 battery with Max 70W output
-0.96inch OLED screen on the top, detailedly show you the operation data
-Compatible with more than 90% of original accessories of Billet Box Pod Kit
-5 different forms: Pod Mode, Tank/RDA Mode, Universal Mode, 18650 Mode, 18350 Mode
-Supbox pod tank compatible with SMOK RPM Coils
-Supports on-board charging
Package includes:
1 x SXK Supbox(pre-installed Supbox Pod Tank and Sleeve)
1 x USB Charging Cable
2 x Coils(0.6Ω/1.1Ω)
1 x User Manual
1 x Outer Case for Atomizer
1 x 510 Connector
Special Offer: Ultroner Victory 60W Box Mod
Product introduction
Victory Box Mod is a beautiful stainless steel and stabilized wood chassis box mod from Ultroner. Powered by single 18650 battery , the Victory delivers 5W to 60W wattage output. Equipped with the advanced SEVO-60 chipset, the Victory allows the minimum resistance is 0.1ohm. Together with the OLED display screen, you can know the atomizer resistance, voltage output, puff counter, and battery life at a quick glance.
Parameters:
Size: 88x 55x 35mm
Material: Stabilized wood + SS
Chipset: SEVO-60
Modes: VW/ Bypass
Wattage output: 5- 60W
Maximum voltage output: 8V
Coil resistance range: 0.1- 3.0ohm
Screen: OLED display screen
Charging: Micro-USB charge port
Powered by single 18650 battery (Not included)
Features:
-Convenient OLED display screen
-The minimum resistance is 0.1ohm
-Powered by advanced SEVO-60 chipset
-Premium quality SS & stabilized wood chassis
Package includes:
1x Victory Box Mod
1x User Manual
1x Cleaning Cloth
1x USB Cable
Pre Order: Vaporesso FORZ TX80 Box Kit with FORZ Tank
Product introduction
Vaporesso FORZ TX80 Kit is waterproof, shockproof, and dustproof with all around protections.Powered by a 18650 battery that features adjustable output power range from 5 to 80W.Combined with the unmatched capabilities of the AXON 2.0 chipset,provide up to 80 watts of output power,adopts the unique F(t) mode,which can change the output voltage and heating rate within a certain period of time, covering a wider temperature range to ensure that the e-liquid is highly decomposed,achieve an unprecedented leap in flavor release. Vaporesso FORZ Tank 25 holds 4.5ml juice capacity with replaceable coil system,provides threaded top filling,dual filling ports, screw to fill, safer e-liquid filling way.In addtion,FORZ Tank 25 is compatible with GTR 0.15ohm Mesh Coil and GTR 0.4ohm Mesh Coil, which are designed with anti-bacteria organic cotton, a larger airway, and an updated leak-proof structure, making each puff an impressive one.The Pull & Push coil replacement brings easiness to the user’s operation.
Parameters:
Size: 84.6mm x 30.1mm x 41.7mm
Capacity: 4.5ml
Battery:Single 18650(not included)
Output Power: 5-80W
Resistance: 0.03-5.0ohm
Charging : DC 5V/2A Type-C
Display: 0.69’’ OLED Screen
Coils: GTR 0.4ohm MESH Coil (40-60W)/ GTR 0.15ohm MESH Coil (60-80W)
Chipset: AXON Chip 2.0
Thread: 510
Features:
-Water-proof, Shock-proof, and Dust-proof
-AXON CHIP 2.0 with innovative F(t) MODE
-5V/2A Type-C charging port,0.69-inch OLED screen
-Brand New Sub-ohm Tank - Forz Tank 25
-Powered By Single 18650 Battery with adjustable output power from 5 to 80W
-4.5ml Tank, covered by fiberglass plastics & high tenacity soft-rubber, with a silicone Drip Tip Cover
-GTR Coil Platform with Antibacterial Organic Cotton and Leak-proof Structure
-Top refill with large airways for DL vape
Package includes:
1 x FORZ TX80 MOD
1 x FORZ TANK 25 (4.5ml)
1 x GTR 0.15Ω MESH Coil (pre-installed)
1 x GTR 0.4Ω MESH Coil (inbox)
1 x Screwdriver
1 x USB Silicone Plug
1 x Silicone Drip Tip Cover
1 x FORZ Badge
4 x O-ring
1 x Glass Tube
1 x Type-C USB Cable
1 x User Manual
1 x Warranty Card
Pre Order: Vaporesso Luxe 2 II 220W Starter Kit with 8ML NRG-S Tank
Product introduction
Vaporesso LUXE II Kit is an upgrade of the original Vaporesso LUXE, combining elegant aesthetics with powerful output for an unparalleled vaping experience,consists of Vaporesso LUXE II 220W Mod and Vaporesso NRG-S Tank.LUXE II VW Vape Box mod is equipped with the transformative AXON CHIP and a thoroughly upgraded UI.The Pulse Mode constantly satisfies you with throat hits. By adopting the NRG-S tank loaded GT MESH coils, LUXE II empowers a flavorful and powerful vaping experience.Vaporesso LUXE II Kit Powered by the AXON Chipset, the LUXE II 2 Box Mod can deliver up to 220W of powerful output, fueled by the dual 18650 batteries .The most eye-catching 2.0 inch TFT color screen and the elegant design, making the LUXE II an impressive one from the first sight.NRG-S Sub Ohm Tank adopts upgraded MESHED technology to maximize interaction between e-juice and cotton for turbo heating performance,comes with mesh GT coils for excellent flavor which can be easily replaced through the pull & push design and 8ml capacity with slide to top filling design.
Parameters:
Size: 47.8 x 29.5 x 145.8mm
Capacity: 8ML
Chipset: AXON Chip
Battery: 2 x 18650 Battery (Not included)
Screen: 2.0 inch TFT color screen
Charging Current: 5V/2.5A
Output Wattage:5-220W
Resistance: GT 0.18ohm Meshed Coil (50-85W)
GT4 0.15ohm Meshed Coil (50-75W)
Filling:Top Slide To Filling
Features:
-Powered by dual 18650 batteries and support 220W power
-8ml Large Capacity Tank with Slide To Filling
-Support Pulse/Power ECO/Smart TC/DIY Modes, Powerful All The Time
-Equipped with the transformative AXON CHIP and a thoroughly upgraded UI
-2.0 inch TFT color screen to monitor the device easily
-Multiple security protection
Package includes:
1 x LUXE II Mod
1 x NRG-S Tank (8.0ml)
1 x GT Meshed Coil (Pre-installed)
1 x GT4 Meshed Coil (In the Box)
1 x Glass Tube (5ml)
4 x O-ring
1 x User Manual
1 x Warranty Card
In Stock: Stratum Balance Style 60W Box Mod
Product introduction
Stratum Balance Style 60W TC VW Box Mod powered by single 18350 / 18650 battery (not included),Long side by side version with 18650 battery or short version with 18350 battery,supports max. 60W output.Compatible with 24mm diameter vape atomizer.The activation button and the adjustment button are perfectly integrated into the attractive design and can be adjusted laterally.Stratum Balance Style is made from POM/PC and Stainless Steel.
Parameters:
Battery:18350 / 18650(not included)
Power Output:1-60W
Display: 0.91"
Thread Type: 510
Input Current: 0.5A-30A
Output Voltage: 0.5V-8V
Resistance: 0.1ohm-3.0ohm
Coil Material Supported: Ni / SS / Ti
Efficiency: 91%
Temperature control range: 100’C-315’C / 200’F-600’F
Features:
-Powered by 1 x 18350 / 18650 battery (battery not included)
-Compatible with 24mm diameter atomizer
-Made from POM/PC and Stainless Steel.
Package includes:
1 x Stratum Balance Style 60W Box Mod
In Stock: Smok SCAR-P3 Pod Kit 2000mAh
Product introduction
Smok SCAR-P3 Kit is a waterproof, shockproof, dustproof pod kit. It is powered by an internal 2000mAh battery and can be charged by the convenient type-C charge port. Equipped with the advanced IQ-80 Chipset, Smok SCAR-P3 has enhanced the performance which will be a more stable output and has all-round protection.
Parameters:
Size: 27x 32.3x 110mm
Pod capacity: 5.5ml
Output wattage: 5-80W
Charge: USB Type-C port
Output wattage: 0.5-4.0V
Resistance range: 0.2-2.5ohm
Screen: 0.96 inch TFT display
Battery: Built-in 2000mAh battery
Features:
-5w to 80w adjustable power
-Convenient type-C charge port
-Sophisticated design in and out
-Waterproof, shockproof, dustproof
-IQ-80 Chipset for enhanced performance
Package includes:
1x Smok SCAR-P3 Device
1x Scar-P3 RPM 2 pod
1x Scar-P3 RPM pod
1x USB charge cable
1x User manual
NEW: SMOK THALLO 80W Pod Mod Kit 3000mah
Product introduction
SMOK Thallo Pod Mod Kit powered by integrated 3000mah battey, holds of 5ml capacity,provides fast charge VIA a type-c port,decorated with a leather matching,the brand-new IQ-XS chip accompanies the 80W max output,instant 0.0001s firing time and multiple safety protections,Reshuffles the standard pod mod series with extender standby time and heightened happiness when you are vaping.Dual applicable pod(RPM 2& RPM) for doubled experience,sold separately.There are 2 types coils included,RPM 2 Mesh 0.16ohm and RPM 2 DC 0.6ohm MTL,respectively focus on producing a plumper taste and tight flavor.DIY the airflow to expose more or less space of the air slot on either side to strengthen or weaken the flavor to suit your taste preference.
Parameters:
Size: 123.65 x 37.7 x 30mm
Capacity: 5ml
Battery: 3000mah built-in
Output Voltage: 0.8-4.0V
Input Voltage:3.3-4.2V
Standby current: <100uA
Overcharge voltage: 4.3±0.05V
Overcharge current: 2±0.6A
Overdischarge voltage: 2.4±0.05V
Power Range: 1-80W
Charging Current: Max 1.2A
Resistance Range: 0.15-2.5ohm
Resistance: Mesh 0.16ohm(25-50W,Best:40W)
DC 0.6ohm MTL(12-25W)
Features:
-Metal matching leather with the dreamy fluid patterns
-Powered by integrated 3000mah battey with the 80W max output
-Provides fast charge VIA a type-c port
-Driven by brand-new IQ-XS chip,instant 0.0001s firing time
-RPM 2 Mesh 0.16ohm and RPM 2 DC 0.6ohm MTL,respectively focus on producing a plumper taste
-DIY the airflow
-Dual applicable pod for doubled experience
-5 protections guard a realiable vaping
Package includes:
1 x SMOK Thallo device(3000mah)
1 x SMOK Thallo RPM 2 Pod(5ml)
1 x RPM 2 Mesh 0.16ohm coil
1 x RPM 2 DC 0.6ohm MTL coil
1 x Type-c Cable
1 x User Manual
New Batch: OXVA X Pod System Kit 1600mAh
Product introduction
OXVA X Pod System Kit is the first RDA-flavor pod system. It is powered by an internal 1600mAh battery with 40W max output. Equipped with the advanced Photon chip, OXVA X features auto-detect function, five power options, burnt proof, and multiple protections. The OXVA X Pod is compatible with the UNI coils, includes two mesh coils, one regular coil, and the RBA coil (Sold separately).
Parameters:
Size: 31x 18x 107mm
Pod capacity: 2.0ml
Output wattage: 5-40W
Charger: 2A, Micro USB port
Battery: 1600mAh internal battery
Compatible coils: 0.3ohm mesh coil,
0.5ohm mesh coil, 1.0ohm regular coil, RBA coil
Protections: Switch timeout/ short-circuit/
overcharge/ over-discharge/ over current protection
Features:
-Support DTL and MTL vaping
-Five power options and burnt proof
-Advanced Photon chip with auto-detect function
-Compatible with UNI sub-ohm coils and RBA coil (Not included)
Package includes:
1x OXVA X device
1x OXVA X pod
1x OXVA unicoil 0.3ohm (Mesh)
1x OXVA unicoil 0.5ohm (Mesh)
1x USB cable
1x Warranty card
1x Attention card
1x User manual
In Stock: Asvape Hita Ink Pod Mod 1500mah Kit 5ml
Product introduction
Asvape Hita Ink Pod Mod Kit is powered by built-in 1500 battery with adjustable wattage of 5-40W.Asvape Hita Ink Pod Mod Kit inherits the classic style of Asvape strider, the illustration style of Michael 200W and the innovative cartridge structure of Hita.Asvape Hita Ink Pod cartridge has 5ml capacity and 0.3ohm mesh coil for DTL vaping, 1.0ohm for MTL vaping.Featuring self-developed ReekBox chip to identify the coil resistance and match the power automatically and OLED screen to display the detailed vaping data.
Parameters:
Battery: 1500mah built-in battery
Capacity: 5ml
Output: 5-40W
Resistance: 0.3ohm/ 1.0ohm
Output voltage: 0.5-4.0V
Input voltage: 3.3-4.2V
Resistance range: 0.15-2.5ohm
Charging voltage: 5V±0.2V
Charging current: max 1.4A
Standby current: <120uA
Features:
-Powered by 1500mah built-in battery with max 40W output
-0.3ohm for DTL vaping, 1.0ohm for MTL vaping
-Adjustable airflow
-OLED screen display vaping data clearly
-Self-developed ReekBox chip
Package includes:
1 x Asvape Hita Ink Pod Mod kit
Eleaf iStick S80 Starter Kit with GZeno Tank 3ml
Product introduction
Eleaf iStick S80 Kit provides a firm grip and aesthetics, with ergonomic dimensions.It consists of the Eleaf iStick S80 box mod and Eleaf GZeno Tank.Powered by installed 1800mAh integrated battery,can output up to 80 watts in variable wattage mode and has a resistance range of 0.1 to 3ohm,equipped with a 0.96 inch TFT display to display output power, remaining battery power, and other parameters.iStick S80 provides the three-button control, including an intuitive fire button and two adjustment buttons.Eleaf GZeno Tank holds 3ml capacity with top filling design.Eleaf iStick S80 Kit contains two matched GZ coil heads with a resistance of 1.2ohm, designed for MTL vaping.
Parameters:
Size:113.5 x 33.5 x 25.5mm
Capacity: 3ml
Battery: Built-in 1800mAh
Output: 1-80W
Resistance Range: 0.1-3ohm
Display: 0.96" TFT Screen
Filling: Top Fill
Drip Tip:510 Drip Tip
Thread: 510
Output Mode: VW(Variable Wattage)
Charging : USB Type-C
Coil:Eleaf GZ 1.2ohm Coil
Features:
-Support MTL vaping
-Powered by Internal 1800mAh battery, max 80W output
-Five-level bottom airflow control
-Type-C Fast Charging
-0.96" TFT Screen to display Parameters
-Compatible with Eleaf GZ Coils 1.2ohm
Package includes:
1 x Eleaf iStick S80 battery
1 x Eleaf GZeno Tank
2 x GZ 1.2ohm Coil
1 x USB Type-C Cable
1 x User Manual
Rincoe MANTO AIO XR 80W Kit or Rincoe Manto Beast 228W RDA Kit
Rincoe MANTO AIO XR 80W Kit
Product introduction
Rincoe MANTO AIO XR 80W Kit powered by 18650 Battery(not included), can work in the Passthrough mode, the response speed of the current flow to the evaporator is 0.001 seconds.0.69 " OLED Screen,Type-C port for charging.The cartridge holds 3ml capacity. you will get a transparent plastic case with two large holes at the bottom and top for installing the evaporator and the airflow adjustment mechanism. Replacement coils are almost unique and only compatible with the first version of the Manto AIO. Inside there can be either a regular coil (with a resistance of 1.2 Ohm) for an MTL assembly, or a mesh (with a resistance of 0.3 / 0.15 Ohm) for a DTL assembly. On the upper end there is a 510 drip tip (the diameter of the bore is 6 mm - we forget about the correct MTL right away), and at the bottom there are three tricky ventilation holes, the name of the mod and a couple of obligatory badges.
Rincoe Manto Beast 228W RDA Kit
Product introduction
Rincoe Manto Beast 228W RDA Kit which composed of newly designed Manto Beast 228W box mod and Metis RDA,comes with 810 drip tip to provide you with a beast cloud.The Rincoe Manto Beast Kit box mod is made of a lightweight PC, powered by dual 18650 batteries, and has a maximum output power of 228W which supports 2A Type-C quick charging and 5 levels adjustable output voltage to meet different demands.Magnetic panel, firm connection, and easy battery replacement make Manto Beast much more eye-catching.With a simple deck, designed for dual coil builds, Metis RDA is easy to build and wick, bringing dense flavor as well.
NEW: SMOK THALLO S Pod Mod Kit
Product introduction
SMOK THALLO S Pod Mod Kit is powered by a single 18650 or 21700 battery,enhanced convenience and longer lifespan,completely fixes the issue of troublesome wire-charging while outside,SMOK THALLO S Pod Mod Kit with 100W maximum output.It is more easy-to-complete than one-to-one design and durable than the rated power.Driven by brand-new IQ-XS chip is pleased with 0.001s firing speed,0.96 inch screen display the vaping duration time,puff counting,selected power,battery life and so on. SMOK THALLO S charging by Type-C port.The THALLO S Pod features 5ml large capacity, Two included coils are designed to enrich the diversity of the taste.
Parameters:
Size: 129.1 x 37.5 x 31.4mm
Capacity: 5ml
Battery:Single 18650 or 21700(Not Included)
Output Voltage: 0.5-4.0V
Input Voltage:3.3-4.2V
Charging voltage: 5±0.2V
Power Range: 5-100W
Charging Current: Max 1.4A
Resistance Range: 0.15-2.5ohm
Chipset: IQ-XS chipset
Screen: 0.96inch
Charging Port: Type-C
Resistance:0.16ohm RPM 2 Mesh Coil/0.6ohm RPM 2 DC MTL Coil
Features:
-Driven by brand-new IQ-XS chipset
-0.001s firing speed
-Poweredby a single 18650 or 21700 battery(Not Included)
-0.96 inch screen display the vaping duration time,puff counting,selected power,battery life and so on
-Two included coils are designed to enrich the diversity of the taste.
-5ml large capacity
Package includes:
1 x Thallo S Device
1 x Thallo RPM 2 Pod(5ml)
1 x RPM 2 Mesh 0.16ohm Coil
1 x RPM 2 DC 0.6ohm MTL Coil
1 x Type-C Cable
1 x User Manual