Thanks man! lol 
Itās not sarcasmā¦itās pure genius innit @Pugs1970 
2 Likes
well you knowā¦one doesnāt like to bragā¦
but yesā¦yes it isā¦
7 Likes
If anyone is interested, I could do a quick raffle on this little piece:
Itās a pwm mod, dual 18650, and itās really tiny.
I could do 30 spots at $5 each or 15 spots at $10 each. Anybody interested?
2 Likes
Let me/us know when to buy a ticket.
1 Like
Letās do itā¦
30 spots or 15 spots?
Iām good either way
Wanna tag some people and gather some contestants? Weāll knock out a 15 spot, $10 each raffle.
1 Like
How low does it fire for ohm and how high for āwattageā. Wattage in theory?
My coil sweet spot is dual ss316L 24g 10 wrap and ohms at 0.19
i can answer these questions, Mr Chris.
first of all, you need to understand how PWM boards work. PWM stands for pulse width modulation. These boards fire the entire capacity of the batteries over and over in really quick short burstsā¦or pulses. There is a potentiometer, or pot, that controls the duty cycle. Turn the pot down, you get shorter pulsesā¦turn the pot up, you get longer pulses. The batteries are ran in series, so thats 8.4 volts at full strength. You should run a coil build with resistence that your batteries can handle. For this info, refer to your batteries amps. I prefer Sony VTC5A or Sony VTC4 batteries, because they have 25 and 30 amps respectively. Now to get your ohms that you can fire down to, use the Ohms Law Calculator. For the rest of your equation, i believe its W=VxA. But all this info can be found here:
http://rapidtables.com/calc/electric/watt-volt-amp-calculator.htm
I will tell you this: with the proper build and the proper 18650s, you can get over 200 watts.
For lower builds and higher watts, like 0.18 and well over 300 watts, you would use a lipo battery.
The boards i use can handle 60 amps safely, but have been stress tested far beyond that.
And one last thing: This method of power, the PWM, using the high power pulses, does something magical to juices. It makes them taste better. Its hard to explain, but just ask someone who owns a PWM mod.
Any questions? Hit me!
2 Likes
Only 2 people have shown interest.
Iāll need more excitement than that.
How about flooding this post right here with likes?
4 Likes
Iād love to, but Iām spent out for another week! Sorry. Next time though fer shur.
2 Likes
Are you able yet to build a DNA220 dual 18650 mod yet?
2 Likes
I am able with a simple enclosure, for sure
1 Like
I am always interested in a raffle and daddyās feeling lucky!
@Pugs1970 @MisterSinner @Grubby @Josephine_van_Rijn @Lolly
3 Likes
Hell yeah interested
2 Likes
why the f&*k not
If I win donāt lynch me 
3 Likes
Okā¦thatās enough for me!
15 spots, $10 each. Effective now!
One entry per person!
1 Like
Iām building tonight, so please post payment pic and follow how many so we donāt go over!