Ok 26g SS chain link… this looks pretty but might be a bit too low for my tastes lol ohms out at .10 and .14 after dry burn and corrections
Might have to try 28 or 32 which I do have…
9 Likes
I’m pretty versed using a drill lol slow and steady when twisting the 2 twisted wires together counter clockwise
6 Likes
So was it you that sent me my little package? Been out on vacation, so busy on return that I haven’t figured out who to thank…I did vape 25% of the juice included by the “unknown” person. Apple Fritter, nice vape and a departure from my rut.
…and if so, duh, THANK YOU SIR! I have just the dripper to put this in!
6 Likes
Or me… 
3 Likes
Yes it was, and yes it was in a hot pink bubble mailer!
4 Likes
Thanks again! It’s nice to get such a surprise!
4 Likes
Your welcome bro, let me know how you like that wire.
5 Likes
Yes, they where cheaper than the white ones, and I don’t care what color they are.
5 Likes
Ok folks here goes the main attraction lol
Redid my chain link with 28gauge SS got it juiced up with some glazed B.B. donut with rayon wick… time to have a vape!
5 Likes
And yes that’s home made pizza in the background and the beer is out of sight to the left lol
6 Likes
What are you ohming out at per coil on that 7 (I guess) wrap?
4 Likes
.2 ohm on that and yes it’s a 7 wrap 
still a bit low for me but that’s a good spot on the Goon RDA… I’m not sure I got the wick right using rayon… I might re wick with my normal cotton just to do a good flavor comparison then come back to rayon and retry it might not be snug enough or I have too much down in the drip well
3 Likes
Gonna try another build with 32g SS
5 Likes
Ok for the record… twisting and using only 32g wire SUCKS!!! Way too springy. I got a build done finally but it’s ugly and can’t get them to be contact coils lol I put it in one of my wife’s tanks and gave her some new juice I made for her and she seems happy with it but I’m not. So tomorrow I will work on a different strategy and will let you all know how it turns out. Oh and yes the ohms are higher but it started at .29 and as I dry fired it got up to .56 and some place in between… that was a 6 wrapdual coil 3mm ID
3 Likes
@jayrell do you have a little butane torch? If you heat the wire to red before you coil the spring will be nonexistent.
5 Likes
I do and I tried that lol it didn’t help… but to be fair I did not heat it very long… I was tired and ready to be done with it so it was a half assed attempt at heating it up… so maybe tomorrow I will have better results
3 Likes
