Uwell Caliburn G Pod System Kit 690mAh, the upgrade version of Caliburn, works with 690mAh built-in battery and can fire up to max 15W output. Uwell Caliburn G Pod kit can vape directly through air pressure sensor or manual button to start vaping. Uwell Caliburn G cartridge comes with 2ml capacity with top-fill and leakproof design. Uwell Caliburn G pod supports two different airflows: restricted DTL vaping (when the air inlet of the pod and the air inlet of the device are close to each other) and MTL vaping (when the air inlet of the pod and the air inlet of the device are far away from each other).
Parameters:
Size: 108.3* 22.5* 12.6mm
Battery: built-in 690mAh battery
Output: max 15W
Charging: 1.5A
Capacity: 2ml
Features:
Internal 690mah battery with max 15W output
Quilckly lock/unlock by 5 clicks
Direct vape or button vape
Top filling design
1.5A USB Type-C charging
2 different airflows, ingenious airway design: restricted DTL and MTL vape
Packages:
1* Uwell Caliburn G Kit
1* Uwell Caliburn Pod Cartridge
1* USB Type-C Cable
1* User Manual
Geekvape Zeus Nano Sub Ohm Tank, the new member of Zeus series, is a 22mm diameter and 2ml capacity( 3.5ml spare glass tube included) tank. Geekvape Zeus Nano Tank features adjustable top airflow design to provide top-to-bottom airflow to support MTL/DTL vaping. Geekvape Zeus Nano utilizes new Geekvape B Series Coil for better flavor.
Parameters:
Size: 22* 56.55mm
Capacity: 2ml/ 3.5ml
Resistance: Geekvape B Series Coil 0.4ohm(25-33W)
Geekvape B Series Coil 0.6ohm(15-25W)
Drip tip: 510 drip tip
Thread: 510
Features:
Top-to-bottom airflow, adjustable top airflow
Leakproof top airflow system
New Geekvape B Series Coil for better flavor
Top filling design
Support MTL/ DTL vaping
Packages:
1*Geekvape Zeus Nano Tank (2ml)
(Pre-installed: Geekvape B Series Coil 0.40, 25-33W)
Vaporesso FORZ TX80 Starter Kit, consisting of Vaporesso FORZ TX80 mod and Vaporesso FORZ Sub Ohm Tank 25, is all-round rugged vaping device with stylish design and Water-proof, Shock-proof, Dust-proof. Vaporesso FORZ TX80 Starter Kit features AXON Chip 2.0 Chipset with F(t) Mode and 0.69 inch OLED Screen to show detailed vaping data. Vaporesso FORZ TX80 Starter kit is powered by single 18650 battery with max 80W output. FORZ TANK 25 adopts 4.5ml capacity with screw to top filling design and 0.4ohm/ 0.15ohm GTR mesh coil for purer flavor.
Parameters:
Size: 84.6* 41.7* 30.1mm
Material: Zinc Alloy & Fiberglass plastics & Soft-rubber
Battery: single 18650 battery(Not included)
Output: 5-80W
Screen: 0.69 inch OLED Display
Resistance Range: 0.03-5Ω
Charging Current: DC 5V/2A
Chipset: AXON Chip 2.0
Capacity: 4.5ml
Resistance: GTR 0.4Ω MESH Coil (40-60W)
GTR 0.15Ω MESH Coil (60-80W)
Thread: 510
Features:
Stylish design
All-round rugged vaping device
Water-proof, Shock-proof and Dust-proof
Powered by single 18650 Battery with max 80W output
AXON Chip 2.0 Chipset with F(t) Mode
0.69 inch OLED Screen
Screw to top filling design
GTR Coil, antibacterial organic cotton and leak-proof
Adjustable bottom airflow system
Pull & push coil installation
Packages:
1* Vaporesso FORZ TX80 MOD
1* Vaporesso FORZ Sub Ohm Tank 25
1* GTR 0.15Ω MESH Coil (pre-installed)
1* GTR 0.4Ω MESH Coil (in box)
1* Glass Tube
4* O-rings
1* Screwdriver
1* USB Silicone Plug
1* FORZ Badge
1* Silicone Drip Tip Cover
1* Type-C USB Cable
1* User Manual
1* Warranty Card
Asvape Hita Ink Pod Mod Kit inherits the classic style of Asvape strider, the illustration style of Michael 200W and the innovative cartridge structure of Hita. Asvape Hita Ink Pod Kit is powered by built-in 1500 battery with adjustable wattage of 5-40W. Asvape Hita Ink features self-developed ReekBox chip to identify the coil resistance and match the power automatically and OLED screen to display the detailed vaping data. Asvape Hita Ink cartridge has 5ml capacity and 0.3ohm mesh coil for DTL vaping, 1.0ohm for MTL vaping.
Parameters:
Battery: 1500mah built-in battery
Output: 5-40W
Output voltage: 0.5-4.0V
Input voltage: 3.3-4.2V
Resistance range: 0.15-2.5ohm
Charging voltage: 5V±0.2V
Charging current: max 1.4A
Standby current: <120uA
Capacity: 5ml
Resistance: 0.3ohm/ 1.0ohm
Features:
Internal 1500mah battery with max 40W output
Self-developed ReekBox chip, identify the coil resistance and match the power automatically
OLED screen
0.3ohm for DTL vaping, 1.0ohm for MTL vaping
Adjustable airflow
Packages:
1* Asvape Hita Ink pod mod kit
Eleaf iStick S80 Starter Kit, the new iStick series, is composed of Eleaf iStick S80 box mod and Eleaf GZeno Tank. Eleaf iStick S80 mod adopts exquisite metal design with texture for aesthetics and ergonomic dimensions. Eleaf iStick S80 is powered by 1800mAh built-in battery with max 80W output and can be charged by Type-C. iStick S80 is also equipped with 0.96 inch TFT screen to show the vaping information. Eleaf GZeno Sub ohm Tank maintains 3ml capacity with top filling design and 510 drip tip. Eleaf GZeno features five-level bottom airflow control and Eleaf GZ Coils 1.2ohm to support MTL vaping.
Parameters:
Size: 113.5* 33.5* 25.5mm
Battery: built-in 1800mAh battery
Output: 1-80W
Mode: VW(variable wattage)
Resistance Range: 0.1-3ohm
Screen: 0.96 TFT Display
Capacity: 3ml
Drip Tip: 510 Drip Tip
Resistance: Eleaf GZ 1.2ohm Coil
Thread: 510
Features:
Internal 1800mAh battery, max 80W output, Type-C fast charging
0.96 inch TFT screen
Top-filling design
Five-level bottom airflow control
Compatible with Eleaf GZ Coils 1.2ohm
Support MTL vaping
Packages:
1* Eleaf iStick S80 battery
1* Eleaf GZeno Tank
2* GZ 1.2ohm Coil
1* USB Type-C Cable
1* User Manual
Hello guys
Here is combo from Augvape: Augvape Druga 2 BF RDA 24mm +Augvape VX217 VW/TC Box Mod, do you like it? Let`s check details now!
Augvape Druga 2 BF RDA 24mm Augvape Druga 2 BF RDA features upgraded Clamp Snag System(CSS) for easy dual coils building and many adjustable side airflow combination for flavor and cloud. Augvape Druga 2 maintains 24mm diameter, 810 drip tip and squonk pin, compatible with squonk mod.
Parameters:
Size: 24* 39mm
Drip Tip: 810 Widebore Drip Tip
Build Deck: Gold Plated Dual Post Build Deck
Airflow: Side Adjustable
Thread: 510 Gold Plated Contact Pin
Features:
Low profile
Deep juice well
Many adjustable side airflow combination for flavor and cloud
Upgraded Clamp Snag System(CSS) for easy dual coils building
Gold plated SS squonk pin included
Gold plated SS contact pin installed
18K Gold plated posts on black deck
Packages:
1* Augvape Druga 2 RDA
1* BF Pin
3* O-rings
Augvape VX217 VW/TC Box Mod Augvape VX217 VW/TC Box Mod, upgraded from VX200, is first mod that can reach 12V, suitable for high ohm coil. Augvape VX217 TC box mod, made of Zinc alloy, is powered by dual 18650/20700/21700 batteries and can reach up to max 217W output. Augvape VX217 box mod features 1.3 inch color screen with 240*240RGB resolution to offers hundreds of color theme options. The UI simulates the car dashboard can show vape time, mode, wattage, voltage, resistance, batteries life. Augvape VX217 mod supports VW/ VV/ Bypass/ TC modes to meet vapers’ needs.
Parameters:
Size: 80* 49* 42mm
Material: Zinc Alloy
Battery: dual 18650/20700/21700 batteries(not included)
Output: 5-217W
Voltage range: 0.5-12V
Display: 1.3 inch color screen
Modes: VW/ VV/ Bypass/ TC modes
Resistance range: 0.05-3ohm
Charging current: 1.2A quick charge
Thread: 510
Features:
First mod that can reach to 12V, suitable for high ohm coil
Powered by dual 18650/20700/21700 batteries with max 217W output
Minimalist design with spin button and big fire button
1.3 inch color screen with 240240RGB resolution to offers hundreds of color theme options
Excellent UI simulates the car dashboard to show vape time, mode, wattage, voltage, resistance, batteries life
Supports VW/ VV/ Bypass/ TC modes
Simple circuit design and less wire, last much longer
Packages:
1Augvape VX217 Mod
1* Type-C cable
1* Battery adaptor sleeve
1* User manual
Vapx Geyser S 50W POD System Kit is a slide-in pod device. Vapx Geyser S 50W POD Kit works with built-in 1500mah battery with Buck-Boost function to provide stable output. Vapx Geyser S cartridge maintains 3.2ml see-through e-juice tank with top filling design and 0.25ohm single Air mesh coil, which is compatible with Geyser dual AFC 45W pod. Vapx Geyser S pod features stepless AFC airflow control mechanism with 3D airflow to support Loose MTL and Restricted DTL vaping.
Parameters:
Package Size: 102* 151* 51mm
Battery: 1500mAh built-in battery
Capacity: 3.2ml
Resistance: 0.25ohm single Air mesh coil(35-45W)
Features:
Internal 1500mah built-in battery
Buck-Boost, stable output to deliver consistent vaping
Single Air Mesh coil for dense flavor
Stepless AFC airflow control mechanism, 3D airflow, medium cloud
Support Loose MTL and Restricted DTL vaping
Slide-in pod switching action
Top-filling design with 360° see-through e-juice tank
Compatible with Geyser dual AFC 45W pod
Packages:
1* Vapx Geyser S POD
1* Geyser S mod
2* model 10 coils
1* Type-C cable
Dear Customers,
2020 Chinese National Day & Mid Autumn Festival is coming! Everzon will be on holiday from 1st to 8th Oct 2020. Everzon offers special prices and coupon codes for you to get better price.
Sales time:2020.9.28-2020.10.12 (Clearance is excluded)
During the holiday, customer service(online chat, emails) will be on break, you are welcome to place orders as usual. Shipment and customer service will resume on 9th Oct! We will try our best to arrange shipment and reply emails asap once we back to work. It will take 3-4 days to ship out backlogged orders(except pre-orders & stockout order) when we back to work. Thanks for your understanding and patience.
Hope you enjoy shopping at EVERZON!
SMOK Thallo S Pod Mod Kit SMOK Thallo S Pod Mod Kit also adopts Brand-new IQ-XS chip with 0.001s fire speed. SMOK Thallo S Pod Kit is powered by single 21700 battery with max 100W output(single 18650 battery with max 80W output). SMOK Thallo S features 0.96 inch screen to display the detailed vaping data.
Parameters:
Size: 129.1* 37.5* 31.4mm
Battery: single 18650/21700 battery(not included)
Output: 5-100W(21700)/ 5-80W(18650)
Output voltage: 0.5-4.0V
Input voltage: 3.3-4.2V
Resistance range: 0.15-2.5ohm
Charging voltage: 5V±0.2V
Charging current: max 1.4A
Standby current: <120uA
Capacity: 5ml
Resistance: RPM 2 Mesh 0.16Ω Coil
RPM 2 DC 0.6Ω MTL Coil
Features:
Single 18650 battery
Adjustable wattage of 5-100W
Brand-new IQ-XS chip with 0.001s fire speed
0.96 inch screen
Packages:
1* SMOK Thallo S Device
1* Thallo RPM 2 Pod(5ml)
1* RPM 2 Mesh 0.16Ω Coil
1* RPM 2 DC 0.6Ω MTL Coil
1* Type-C Cable
1* User Manual
SMOK Thallo 80W Pod Mod Kit 3000mah SMOK Thallo 80W Pod Mod Kit decorated with a leather matching for comfortable hand feeling. SMOK Thallo 80W Pod Kit features Brand-new IQ-XS chip with 0.001s fire speed and 0.96 inch screen to display the vaping information. SMOK Thallo Pod Mod Kit is powered by built-in 3000mAh battery with max 80W output. SMOK Thallo pod adopts 5ml capacity, RPM 2 Mesh 0.16Ω Coil and RPM 2 DC 0.6Ω MTL Coil.
Parameters:
Size: 123.65* 37.7* 30mm
Battery: 3000mAh built-in battery
Output: 1-80W
Output voltage: 0.8-4.0V
Input voltage: 3.3-4.2V
Resistance range: 0.15-2.5ohm
Charging voltage: 5V±0.2V
Charging current: max 1.2A
Standby current: <100uA
Overcharge voltage: 4.3±0.05V
Overcharge current: 2±0.6A
Overdischarge voltage: 2.4±0.05V
Capacity: 5ml
Resistance: RPM 2 Mesh 0.16Ω Coil
RPM 2 DC 0.6Ω MTL Coil
Features:
Internal 3000mah battery
Adjustable wattage of 1-80W
Brand-new IQ-XS chip with 0.001s fire speed
0.96 inch screen
Packages:
1* SMOK Thallo Device(3000mah)
1* Thallo RPM 2 Pod(5ml)
1* RPM 2 Mesh 0.16Ω Coil
1* RPM 2 DC 0.6Ω MTL Coil
1* Type-C Cable
1* User Manual
Everzon will be on holiday from 1st to 8th Oct 2020. Everzon offers special prices and coupon codes for you to get better price.
Sales time:2020.9.28-2020.10.12 (Clearance is excluded)
Lost Vape Grus 100W Box Mod is powered by single 21700/ 20700/ 18650 battery with max 100W output. Lost Vape Grus mod features 0.96 inch color screen to show the vaping data clearly. Lost Vape Grus Box Mod can support VW/TC modes and is compatible with up to 30mm diameter tanks.
Parameters:
Size: 94.6* 40.5* 30.5mm
Battery: single 21700/ 20700/ 18650 battery(not included)
Output: 5-100W
Output voltage: 0.8-7V
Mode: VW/ TC
Resistance Range: 0.12-5ohm
Screen: 0.96" color Display
Thread: 510
Features:
Powered by single 21700/ 20700/ 18650 battery
Max 100W output
Support VW/TC mode
0.96 inch color screen
Compatible with max 30mm diameter tanks
Packages:
1* Lost Vape Grus 100W Mod
1* 18650 adapter
1* Type-C Cable
1* User Manual
1* Warranty Card
Everzon will be on holiday from 1st to 8th Oct 2020. Everzon offers special prices and coupon codes for you to get better price.
Sales time:2020.9.28-2020.10.12 (Clearance is excluded)
Hugo Vapor Boxer AIO 40W Pod System Kit 1500mAh Hugo Vapor Boxer AIO 40W Pod System Kit is made of Aluminum alloy & PCTG & PC & ABS with pocket size for easy on the go. Hugo Vapor Boxer AIO 40W Pod Kit is powered by built-in 1500mAh battery with max 40W output. Hugo Vapor Boxer AIO 40W Pod Kit is equipped with 0.91 inch screen to show you the vaping information. Hugo Vapor Boxer cartridge maintains 3.5ml capacity with side fill design and 0.4ohm Mesh coil for better flavor. Hugo Vapor Boxer AIO 40W Pod utilizes special Pod-Rotating airflow system to access a restricted DL or
MTL vaping.
Parameters:
Mod Size: 105* 26.5mm
Material: Aluminum alloy & PCTG & PC & ABS
Battery: 1500mAh built-in battery
Output: 5-40W
Output voltage: 3.0-4.2V
Screen: 0.91 inch display
Type-C Charging: 5V/1A
Pod size: 25* 34mm
Material: PCTG
Capacity: 3.5ml
Resistance: 0.4ohm Mesh Coil
Features:
Pocket size, easy to carry
Internal 1500mah battery with max 40W output
0.91 inch screen
1A Type-C quick charge
3.5ml PCTG food-grade pod, safe vape
Side fill design
Pod-Rotating adjustable airflow for MTL/DL vape
Packages:
1* Hugo Vapor Boxer AIO 40W Battery
1* BOXER AIO 40W Pod
1* BX 0.4Ω Mesh Coil(Pre-installed)
1* Extra 0.4Ω Mesh Coil
1* USB Cable
1* User Manual
1* Warranty Card
IJOY Aria Pod System Kit 900mAh IJOY Aria Pod System Kit, made of Zinc alloy & PCTG, works with built-in 900mAh battery. IJOY Aria Pod Kit features 3 output voltages: Low 3.4V / Medium 3.5V / High 3.6V with intelligent auto-match technology. IJOY Aria cartridge has 3ml capacity with side filling design and 0.6/1.0Ω coils to support DL/MTL vaping. IJOY Aria transparent pod can show e-liquid levels in real-time.
SMOK Scar-Mini 80W Starter Kit is composed of SMOK Scar-Mini mod and TFV9 Mini Tank. SMOK Scar-Mini box mod is equipped with top battery slot to be powered by single 18650 battery with 1-80W adjustable output. SMOK Scar-Mini 80W box mod features IP67 Waterproof, dustproof, shockproof. And 0.69 inch OLED screen can show real-time detailed vape data. SMOK TFV9 Mini Tank adopts redesigned airflow system to adjust by rotating the airflow ring. With Child-resistant lift-and-open top cap, TFV9 Mini Sub ohm Tank can revent accidental opening and leakage. SMOK TFV9 Mini has 3ml capacity with top filling design and V9 Meshed 0.15ohm Kanthal Coil for strong power & huge vapor.
Parameters: SMOK Scar Mini Mod
Size: 75.15025.5mm
Battery: single 18650 Battery(not included)
Output: 1-80W
Output voltage: 1-6.4V
Input Voltage: 3.3-4.2V
Screen: 0.69 inch OLED Display
Resistance Range: 0.15-2.5ohm
Standby Current: <300uA
Charging voltage: DC5V ± 0.2V
Charging current: Max 1.5A
TFV9 Mini Tank
Size: 23* 55.8mm
Material: Stainless steel & glass
Capacity: 3ml
Resistance: V9 Meshed 0.15ohm Kanthal Coil(40-90W)
Thread: 510
Features:
Unique design combining leather and metal, moderate size
Powered by single 18650 battery with max 80W output, top battery slot
0.69 inch OLED Screen, show real-time detailed vape data
IP67 Waterproof, dustproof, shockproof
Redesigned airflow system, adjusted by rotating the airflow ring
Bottom Upgraded Airflow Adjustable System
Child-resistant top cap, lift-and-open to prevent accidental opening and leakage
V9 meshed 0.15Ω coil, strong power & huge vapor
Top filling design
Type-C quick charging
Intelligent atomizer recognition
Puff monitoring system
8s Cut-off
Short circuit protection
Over-heating protection
Low battery warning
Packages:
1* SMOK Scar-Mini Mod
1* TFV9 Mini Tank(3ml)
1* V9 Meshed Coil 0.15ohm(Pre-installed)
1* V9 Meshed Coil
1* Extra Straight Glass Tube
1* Type-C Cable
1* User Manual
https://www.everzon.com/wotofo-manik-80w-pod-mod-kit.htmlWotofo MANIK 80W Pod Mod Kit is constructed of Zinc Alloy & leather with nano-coating for anti-wear, anti-corrosion and extra-smooth surface. https://www.everzon.com/wotofo-manik-80w-pod-mod-kit.htmlWotofo MANIK 80W Pod Kit has a flawless mirror finish option(Prism Gunmetal). Wotofo MANIK 80W Pod Mod features nexCHIP with 0.001s fire speed and is equipped with 0.96 inch TFT screen with 6 color themes. Wotofo MANIK Pod Mod Kit is powered by single 18650 battery with max 80W output. Wotofo MANIK cartridge has 4.5ml capacity with top filling design. Wotofo MANIK is compatible with Vaporesso & Voopoo Devices by GTX Coils or PnP Coils.
Parameters:
Size: 33* 27* 126mm
Main Material: Zinc Alloy & leather
Battery: Single 18650 Battery (not included)
Output: 5-80W
Output Voltage: 0.5-4.2V
Display: 0.96 inch TFT Screen
Charging Current: DC 5V/1.5A
Capacity: 4.5ml
Coils & Resistance: D15 Clapton Mesh Coil 0.2Ω(45-55W)
D14 A1 Conical nexMesh Coil 0.2Ω(35-40W)
D11 Net Mesh Coil 0.2Ω(45-55W)
D13 A1 nexMESH Coil 0.2Ω(37-43W)
Features:
Shining metal with premium leather
Nanotech, nano-coating to avoid wear and corrosion, extra-smooth surface
Flawless mirror finish(Prism Gunmetal)
Newly-developed nexCHIP, 0.001s fire speed
Powered by single 18650 battery with max 80W output and pass-through charging
0.96 inch TFT display with 6 color theme by pressing power button and + button together
Lock and unlock adjustment by pressing + button and - button together
Compatible with Vaporesso & Voopoo Devices Using GTX Coils or PnP Coils
Top filling design
Low voltage warning
PCBA temperature safety shutoff
Short circuit protection
Low resistance protection
Overheating protection
Packages:
1* Wotofo Manik Pod Mod
1* Empty Pod Cartridge
1* D15 Clapton Mesh Coil (pre-installed)
1* D14 A1 Conical Mesh Coil
1* Charging Cable
1* User Manual
SMOK Vape Pen V2 60W Starter Kit is a new pen-shape AIO kit. SMOK Vape Pen V2 60W Kit works with built-in 1600mah battery and can fire up to 60W output. SMOK Vape Pen V2 Kit features 3 LED indicator to show the realtime battery life and charging state and one button design. SMOK Vape Pen V2 has 3ml capacity with top filling design and can adjust airflow by twisting the AFC ring.
Parameters:
Size: 22* 117.7mm
Battery: 1600mah built-in battery (not included)
Output: 1-60W
Output voltage: 3.0-4.0V
Input voltage: 3.3-4.2±0.2V
Resistance range: 0.14-3.0ohm
Charging current: max 670mah
Charging voltage: 4.2±0.2V
Overcharge voltage: 4.3±0.05V
Overdischarge voltage: 2.4±0.05V
Standby current: <50uA
Overcharge current: 1.7±0.6A
Capacity: 3ml
Resistance: 0.15ohm meshed coil(30-50W)
Features:
Pen shape, portable
Internal 1600mah battery with max 60W output
One Button, easy to operate
3 LED indicator, show the realtime battery life and charging state
3ml capacity, top filling design
Twist the AFC ring to switch airflow
Lithium battery protection
Atomizer detection
8s cut-off
Short circuit protection
Low voltage protection
Packages:
1* SMOK Vape Pen V2 device(3ml)
2* Vape Pen Meshed 0.15ohm Coil
1* USB Charging Cable
1* User Manual
Geekvape Mero AIO Starter Kit comes with stylish and simplistic appearance. Geekvape Mero AIO kit is powered by 2100mAh built-in battery with Type-C charging. And Mero AIO kit features 3 adjustable output: Low white, Med blue, High green. Geekvape Mero AIO maintains 0.4ohm/ 0.6ohm Geekvape B Series Coils and adopts adjustable bottom airflow intake to provide MTL & DTL flavor.
Parameters:
Battery: built-in 2100mAh battery
Three output: Low White, Med Blue, High Green
Capacity: 3ml
Resistance: Geekvape B Series Coil 0.4ohm(25-33W)
Geekvape B Series Coil 0.6ohm(15-25W)
Features:
Internal 2100mAh battery with USB Type-C charger
Three power output adjustment: Low white, Med blue, High green
Stylish and simplistic appearance
Geekvape B Series Coil
Adjustable bottom airflow intake
Support MTL & DTL flavor
Packages:
1* Geekvape Mero AIO Kit 2100mAh
Artery Cold Steel AK47 50W Pod Mod Kit 1500mAh（NP Version/HP Version/XP Version） Artery Cold Steel AK47 50W Pod Mod Kit adopts a compact zinc case with militaristic and ergonomic style. Artery Cold Steel AK47 50W Pod Mod features innovative dual airflow adjustment system and patent E-juice detachable tech to avoid dry burn. Artery Cold Steel AK47 works with built-in 1500mAh battery with max 1.5A Type-C charging and can reach up to 50W output. Artery Cold Steel AK47 pod maintains 4.3ml capacity with bottom filling design. Artery Cold Steel AK47 cartridge is compatible with eight different types of coils in four series and can adjust airflow. The first option is the rotating ring at the bottom of the coil. The second option is the round Gear button fixed on the side of the mod. Cold Steel AK47 also can replace top drip tip with two drip tips for DTL and MTL vaping.
Parameters:
Size: 30.5* 22* 111mm
Materials: Zinc alloy & PCTG
Battery: 1500mAh built-in battery
Wattage: Max 50W
Output Voltage: 8V
Resistance Range: 0.4-1.2ohm
Charging current: max 1.5A
Capacity: 4.3ml
Resistance: 0.7ohm mesh HP coil(15-18W)
1.2ohm HP coil(9-12W)
Features:
Internal 1500mah battery with max 200W output
Innovative dual airflow adjustment system
Patent E-juice detachable tech, avoid dry burn
Changeable MTL/DTL 510 Drip Tip
Bottom filling design
Short-circuit protections
Over heat protection
Over current protection
Weak battery protection
8S cut off protection
Low voltage protection
Battery over-charge protection
Packages:
HP Version:
1* Artery Cold Steel AK47 MOD
1* Cold Steel AK47 POD (HP POD)
1* Extra Coil
1* Drip Tip
1* Type-C Cable
1* User Manual
1* Warranty Card
NP Version:
1* Artery Cold Steel AK47 MOD
1* Cold Steel AK47 POD (NP POD)
1* Extra Coil
1* Drip Tip
1* Type-C Cable
1* User Manual
1* Warranty Card
XP Version:
1* Artery Cold Steel AK47 MOD
1* Cold Steel AK47 POD (XP POD)
1* Extra Coil
1* Drip Tip
1* Type-C Cable
1* User Manual
1* Warranty Card
2.Artery Cold Steel AIO 120W Pod Mod Kit Artery Cold Steel AIO 120W Pod Mod Kit is the most versatile pod mod in the market which includes RBA deck & 510 adapter & XP Cores. Artery Cold Steel AIO Pod Mod Kit, the second member of the new Cold Steel Series, is powered by single 18650/ 20700/ 21700 battery with max 120W output and Type-C Charging. Artery Cold Steel AIO Pod kit is equipped with screen to show vaping date. Artery Cold Steel AIO RBA Version comes with 510 adapter to be a box mod. Artery Cold Steel AIO Pod Mod maintains two pods: Artery Cold Steel AIO RBA Pod 2ml and Artery Cold Steel AIO XP Pod 4ml. COLD STEEL AIO XP Pod is compatible with 0.15Ω/ 0.4Ω XP coils. COLD STEEL AIO RBA Pod is compatible with XP RBA for DIY fun. COLD STEEL AIO pod features slide-top filling design and adjustable airflow by removable silicone inserts.
Features:
Powered by single 18650/ 20700/ 21700 battery with max 120W output
Best Performance RBA Deck
510 Adapter to be a box mod
Patent E-juice detachable tech
Multiple Work Mode
Slide-top filling design
RBA Pod & XP Pod
Type-C Charging Port
Numerous protection functions
Short-circuit protections
Over heat protection
Over current protection
Weak battery protection
Reverse battery protection
8S cut off protection
Low voltage protection
Battery over-charge protection
Packages:
XP Version:
1* Artery COLD STEEL AIO MOD
1* COLD STEEL AIO XP POD (0.15ohm XP Core Including)
1* 0.4ohm XP Core
1* 18650 Battery Adapter
2* O-rings
4* Air Reduction Silicon Part
1* User Manual
1* Warranty Card
RBA Version:
1* Artery COLD STEEL AIO MOD
1* COLD STEEL AIO RBA POD (RBA Including)
1* COLD STEEL AIO MOD 510 Adapter
1* Pre-made Coil (Ni80 Triple Fused Clapton)
1* 18650 Battery Adapter
1* RBA 510 Adapter
1* Screw Driver
2* Hex Screws
2* O-rings
4* Air Reduction Silicon Part
1* User Manual
1* Warranty Card
Hello @Everzonvapewholesale …, I’m checking on an order # 100066160…, any updates?, haven’t received confirmation #, tracking # or anything… placed order 10/02/20
VOOPOO Argus 40W Pod Mod Kit 1500mAh VOOPOO Argus 40W Pod Mod Kit is constructed of Alloy & Leather & PCTG with lightweight and exclusive hook. VOOPOO Argus 40W Pod Mod features GENE.AI chipset and 0.96 inch OLED screen to show the vaping information. VOOPOO Argus 40w Pod Mod Kit works with built-in 1500mAh battery with max 40W output. VOOPOO Argus has two pods: 4.5ml PnP Pod & 2ml PnP MTL Pod to provide half-DL and MTL vaping. VOOPOO Argus cartridge adopts infinite airflow system and bottom filling design. VOOPOO Argus pod is compatible with PnP coils.
Parameters:
Size: 108(with PnP Pod)/ 107(with PnP MTL Pod)* 33* 30mm
Material: Alloy & Leather
Battery: 1500mAh Built-in Battery
Output: 5-40W
Output Voltage: 3.2-4.2V
Chipset: GENE.AI Chipset
Resistance Range: 0.3-3.0ohm
Charging: Type-C, 5V/1A
Screen: 0.96 OLED Display
Capacity: 4.5ml(PnP Pod) / 2ml(PnP MTL Pod)
Pod Material: PCTG
Resistance: 0.3ohm PnP-VM1(DL, 32-40W)
1.0ohm PnP-R2(MTL, 10-15W)
Features:
Metal Leather Craft Design, Lightweight Design
Internal 1500mAh Battery, Adjustable output 5-40W
GENE.AI Chipset
0.96 inch OLED Screen
Infinite Airflow System
Magnetic Pod Connection, Dual Pod: PnP Pod & PnP MTL Pod
Compatible with PnP Coils
Upgraded Half-DL and MTL Vaping
Bottom Refill Design
Exclusive Hook
Packages:
1* Voopoo ARGUS 40w Device
1* PnP Pod (4.5ml)
1* PnP MTL Pod (2ml)
1* PnP-VM1, 0.3ohm
1* PnP-R2, 1.0ohm
1* Type-C Cable
1* User Manual
VOOPOO Argus Pro 80W Pod Mod Kit 3000mah VOOPOO Argus Pro 80W Pod Mod Kit, made of Zinc Alloy, is powered by built-in 3000mAh battery with adjustable output of 5-80W. VOOPOO Argus Pro 80W Pod Mod kit features the GENE.TT chipset with Double ignition mode/ Smart mode/ RBA mode/ Manual mode. VOOPOO Argus Pro Mod is equipped with OLED Screen. VOOPOO Argus Pro cartridge has 4.5ml large capacity with bottom fill design. VOOPOO Argus Pro pod adopts dual slotted sliding airflow adjustment.
Parameters:
Size: 124* 35* 31mm
Mod Material: Zinc Alloy
Battery: 3000mAh built-in battery
Output: 5-80W
Output Voltage: 3.2-4.2V
Resistance Range: 0.1-3.0ohm
Chipset: GENE.TT Chipset
Screen: OLED Display
Capacity: 4.5ml
Features:
Internal 3000mah battery with max 80W output
GENE.TT chipset
OLED screen
Double ignition mode/ Smart mode/ RBA mode/ Manual mode
4.5ml large capacity with bottom fill design
Dual slotted sliding airflow adjustment
Magnetic pod nonnection
Atomizer Short Circuit Protection
Low Resistance Protection
Temperature Protection
Overcharge Protection
Output Over-Current Protection
Overtime Protection
Packages:
1* Voopoo Argus PRO Pod Mod
1* 4.5mL PnP Pod
1* Silicone Pod Sleeve
1* 0.3ohm PnP-VM1 Coil
1* 0.15ohm PnP-VM6 Coil
1* MicroUSB Cable
1* User Manual
