I recommend you the new arrival disposable vape pen: Vapeman M2 850mAh Disposable Vape Pen (10-Pack) 6ml / approx.2000 puffs / 50mg. 10 flavors for you to choose.
New Arrival RTA Steam Crave Aromamizer Classic MTL RTA Atomizer
3.5ml / stainless steel / single coil deck / 23mm diameter
Aromamizer Classic MTL RTA is a full flavor engine that delivers excellent flavor, especially for MTL and RDL vapors. 3.5ml rebuildable tank with single-coil deck, very simple to build on. Top refilling makes it easy to refill the e-liquid. Side airflow is adjustable with customizable air pins from φ0.8mm2, φ1mm2, φ1.5mm2, φ2mm2, plus a blind air pin. Various choices of airflow make it amazing for both mouth-to-lung and restricted direct to lung vaping. Flavour is on point, perfect match with Mini Robot Tube, Hadron Lite Mod, and Hadron Mini Mod.
- For both MTL or RDL vaping
- 23mm diameter and the ability to fill 3.5ml vape juice
- Top filling system
- Air pins (φ0.8 mm, φ1.0 mm, φ1.5 mm, and φ2.0 mm)
- Single coil deck
- Deck slotted in the chamber
In the Aromamizer Classic MTL RTA box, you will find
- 1Aromamizer Classic MTL RTA (single coil deck and airflow pin φ1mm2 fitted on)
- 2*φ0.8mm Airflow Pins
- 2*φ1.5mm Airflow Pins
- 2*φ2mm Airflow Pins
- 1*Blind Air Pin
- 1*3.5ml Glass Tube
- 1*Spare 510 Delrin Drip Tip
- 1*Spare Bag of O-rings and Screws
- 1Coil (Clapton Ni80, 32 Ga2+38 Ga, ID 2.5mm, 5 Wraps)
- 1*Coil (K-A1, 28 Ga, ID 2.5mm, 7 Wraps)
- 1*Allen Key
- 1*Steam Crave Sticker
- 1*Manual
Today’s new arrival! Steam Crave Hadron Lite Mod + Aromamizer Supreme V3 RDTA Advanced Combo
6ml/7ml / 25mm diameter / 1*21700/18650/20700 / USB-C charging
Aromamizer Supreme V3 RDTA
Steam Crave Aromamizer Supreme V3 RDTA is an upgraded version of the original series. It follows the previous basic concepts and has some practical improvements, such as honeycomb airflow. Aromamizer Supreme V3 RDTA is a high-quality multifunctional Rebuildable Dripper Tank Atomizer. Aromamizer Supreme V3 RDTA is made of stainless steel + pyrex glass precisely processed, 25 mm diameter is smaller and easier to use than previous products. The Aromamizer Supreme V3 RDTA has a modular structure, so it can be designed individually, whether it is a 6ml or 7ml tank glass or an optional deck. It can be used very flexibly and can be converted immediately. It can be used as an RTA or RDA, or it can be equipped with another chimney. A single-coil deck is pre-installed, and fresh air is fed to it from below and from the side, thus ensuring an excellent taste and ample vapor. Compared to its predecessor, the Supreme V3 has an improved airflow, which offers even more options in the DL area and, together with the single-coil deck, gets everything out of the winding. The airflow is installed in a honeycomb design, which can be adjusted continuously in one row, two rows, or three rows. In addition to a single-coil deck, advanced versions also include a postless deck and mesh deck. Using the included chimney, you can also choose to use the Aromamizer Supreme V3 RDTA with the decks of the Aromamizer Supreme V2 RDTA. Discover the infinite possibilities of vapor with Aromamizer Supreme V3 RDTA.
- Drip Tip: 810 Drip Tip and comes with 510 drip tip adapter (510 drip tip not included)
- Material: Stainless Steel + Pyrex Glass
- Capacity: 2ml juice well in RDA mode / 7ml with bubble glass and chimney extension (included) / 6ml with straight glass
- Smooth: Smoother airflow from restrictive DL to airy DL
- Flexible: Better airflow adjustment in lower wattage 20+W
- Flip over the AFC ring to get more airflow options. Suggested for mesh deck and single coil deck
- Upgraded Juice Flow Control: Faster and accurate juice flow control. Perfect flow even in clod weather or high power vaping
- Easy Refilling: 1/4 open-and-close top cap
- Air supply: 80% side, 20% below
- Build Deck: well-designed single coil deck, advanced version with mesh deck and postless deck
- Compatible with Supreme V2 RDTA decks
- 510 threading connection
- 25mm overall diameter
Hadron Lite SBS Mod
Steam Crave Hadron Lite SBS Mod is powered by a single 18650/ 20700/ 21700 battery (not included), featuring direct voltage-based output and utilizing 100W max output, the adjustable battery door at the bottom is easy to replace your battery and is handy for less frequent charging. With its practical 0.96 inch OLED screen, it allows various levels of modes (VW/ VV/ TC/ Bypass modes). This side-by-side mod applies to a 25mm 510 tank for quick removal and replacement, ideal for a harsh hit with Steam Crave Aromamizer Supreme V3 RDTA. You have no hassle to lose and drop when in use. It incorporates a rigorously positioned fire button and is promised that fires with 10s limitation, which prevents the situation of relying on a sometimes tricky sensor for automation
- Material: Zinc alloy
- Battery: Single 18650/20700/21700 battery (battery sold separately)
- Output: 5-100W
- Output Voltage: 1-8V
- Temperature Range: 200’F-600’F / 100’C-315’C
- Resistance Range: 0.1-3ohm
- Output Current: 40A
- Modes: Power/Voltage/TC(Ni, Ti and SS)/Bypass
- Thread: Spring-loaded 510
In the Hadron Lite Combo box, you will find
- 1*Hadron Lite Mod
- 1*Type-C USB Cable
- 1*18650 Sleeve
- 2*21700 Battery Wraps
- 2*510 Protection Disc
- 1*User Manual
- 1*Steam Crave Sticker
- 1*Supreme V3 RDTA Advanced Kit
- 1*Supreme V3 Whole Unit(with single-coil deck and 5mm chimney installed)
- 1*7ml Bubble Glass
- 1*7mm Chimney
- 1*510 Drip Tip Adaptor(510 drip tip not included)
- 1*Mesh Deck Kit
- 1*Postless Deck
- 1*Spare Part Bag of O-rings and Grub Screws, Slotted Screws
- 1*Allen Key
- 1*User Manual
- 1*Steam Crave Sticker
Black Friday & Cyber Monday Sale 2021 - Sitewide 12% Off! Code: BFCM2021
Hey, guys!
Here comes the 2021 FastTech Black Friday & Cyber Monday Big Sale! FastTech offers a 5-days promotion that saves up to 15% on your order!
Blowout 1:
Black Friday & Cyber Monday Sitewide Coupon
Offer: Sitewide 12% off
Valid Date: Nov 25, 2021 - Nov 29, 2021 (UTC-6)
Coupon Code: BFCM2021
Blowout 2:
FastTech gift card limited offer: Get gift card 3% Free
Buy FastTech Gift Card Now →
Hot sale! Vandy Vape Pulse AIO 80W VW Box Mod Kit
3.7ml/5ml / VVC coil / DIY & coil both compatible / 1*18650/21700/20700 / USB-C charging
Vandy Vape Pulse AIO Kit gives all the DIY factors to bring you the fun of manual, which is boro compatible, and DIT RBA tanks work in most boro style modes. It is not much point in people who pursues a handy way to vape, yet if you prefer to build your kit, it is just the best way. The mesh pre-made coil tank has the curved airflow that is available for different sizes of the coil and supports both DIY and coil, press your coil into the tank, then open the plug to fill. The tank tends to be handier and lighter and set in the box-size kit. The adjustable positive pin can adjust the height of the positive table to fit the kit perfectly. Powered by a single 21700, 20700, or 18650 battery(not included) with a range of output that is up to 80W, it is admired that Pulse AIO considers all-around protection, such as temp control, voltage, bypass. Additionally, the USB type-c port provides reliable power and a faster speed to charge. Covering the sought-after texture, and matching your mood, DIY lovers should never miss it.
Features
- Boro compatible and tanks work in most boro-style mods.
- DIY RBA tank with curved airflow suitable for large or small coils.
- Easy to customize buttons and plates.
- 21700, 20700, and 18650 (w/adaptor) compatible. (battery sold separately)
- DIY RBA tank with curved airflow, suitable for large or small coils.
- Compatible with VVC coil
- Type-C Charging: Pulsa AIO Kit adopts USB Type-C, which can provide reliable power and faster transfer speed to achieve smooth charging.
- Power By An Upgraded Vandy Chip With Max Power 80W
- Open Circuit Protection
- Over-current Protection
- 10 Seconds Cut-off
- Short Circuit Protection
- Over-temperature Protection
- Low-battery Warning
Specifications
- Operating Voltage: 3.2-4.2V
- Power Range: 5-80W
- Maximum Output Current: 32A
- Charging Input Voltage: 5±0.25V
- Resistance: 0.05-3ohm
- RBA Pod Capacity: 3.7ml
- Pre-built Pod Capacity: 5ml
- Charging Current: 1000mAh
Standard Edition Contents
- 1*Pulse AIO Device
- 1*Pulse Vessel RBA Tank
- 1*Pulse Vessel Pre-built Tank
- 1*Wrench
- 2*VCC Coils
- 2*24ga Ni80 Coil 0.4ohm
- 1*Accessory Bag
- 1*Coil Lead Guide
- 1*QC Type-C USB Cable
- 1*Instruction Manual
- 1*18650 Battery Adaptor
New Arrival! ADVKEN OWL PRO Subohm Tank Clearomizer 5ml / 0.2ohm/0.4ohm / 29mm diameter
- 810 replaceable drip tip
- Material: Stainless steel
- Capacity: 5ml
- 0.2ohm and 0.4ohm mesh coil
- Airflow: top airflow system
- Refilling: Top refill
- 510 threading connection
- 29mm overall diameter
Another new arrival atomizer—GAS Mods Kree V2 RTA Rebuildable Tank Atomizer
stainless steel + glass / 22mm diameter
- Top filling system
- The dual terminal build deck
- The oil hole can be closed when you refill to prevent leaking
- There is no need to empty the juice before replacing the coil
- Comes with different replaceable airflow control accessories to bring you a plentiful vaping experience
- 510 threading connection
- 22mm overall diameter
Today’s new arrival! Smoant Charon Baby Plus 35W 1000mAh VW Pod System Kit
3.5ml / 0.6ohm / replaceable magnetic 3D panel / supports DL/RDL/MTL / auto-adjust wattage / air-flow control system / USB-C charging
Feature
- UV 3D Print: Charon Baby Plus uses new UV 3D Print and 2-layers protective UV films technology to provide bright color and high wear resistance but no fingerprint.
- Replaceable Magnet Panel: Charon Baby Plus adopts a strong magnet panel, you can change the panel as you like in just one step.
- Adjustable Air-flow Control System: Charon Baby Plus is equipped with an ingenious “U” type air-flow control system and a dual independent air-flow system. No matter DL, RDL, MTL, just enjoy your vaping time with no leaking.
- 3 Coils Compatible: Charon Baby Plus is compatible with all Santi coils, meets all your needs.
- S-1 DL
- Resistance: 0.4ohm
- Type: Mesh
- Range: 30-35W
- S-2 RDL (pre-install)
- Resistance: 0.6ohm
- Type: Mesh
- Range: 18-25W
- S-3 MTL
- Resistance: 1.2ohm
- Type: Mesh
- Range: 7-12W
- S-1 DL
- Innovative Ernicrmo: Charon Baby Plus creatively uses new wire material ernicrmo with a mesh structure, perfectly offering purification for e-liquid and extending the wire’s lifespan.
- Keep It Simple: 3.5ml cartridge with strong magnet, always provide simplest vaping experience.
- 1000mAh Built-in Battery & 1A Fast Charging: Charon Baby Plus is designed with a 1000mAh built-in battery that can provide your all-day use with maximum 35W output. With Type-C & 1A fast charging, it only takes 60 minutes to charge from 1% to 100%.
- AI Smart Ant-chip (Auto-adjust Wattage by Resistance): Charon Baby Plus adopts AI Smart Ant-chip, It automatically identifies coil type based on their resistance and chooses optimum power output.
- Lowe Voltage Protection
- No-load Protection
- Overtime Protection
- Short-circuit Protection
- Overcharge Protection
Specifications
- Power Output: 1-35W
- Voltage Range: 3.2-4.2V
- Charging: 5V/1A
- Charging Port: Type-C
- Cartridge Capacity: 3.5ml
- Battery: 1000mAh
- Output Mode: Auto-adjust wattage by resistance
- Resistance: 0.3-3ohm
- Material: Zinc Alloy + PCTG
New arrival pod kit—GeekVape Aegis 1FC 550mAh Pod System Kit 2ml / 0.8ohm/1.2ohm / MTL experience / 3-level adjustable power output / 15-min USB-C fast charging
Geekvape 1FC, get fully charged in 15 mins! Smooth MTL flavor with the optimized airway. Hallmarked drop performance. Leakproof top-fill pod. And a multi-purpose button. Get ready for the fast ONE.
Overview
Fast ONE, get ready in 15 mins: Fully charge 1FC in 15 minutes, time to take a nap!
The First Vape Pen with Aegis Design
Optimized Airway Design. All for a smooth MTL experience: A special ‘S-shaped’ design has been adopted on the airway to make airflow smoother and throat-hit stronger.
“Aegis” Hallmarked Drop Performance: To increase the durability of Aegis’ first vape pen, a stronger material Zinc Alloy was introduced on its shell, more resistant to shock and scratches.
ONE POD, the leakproof POD: The leakproof POD on Geekvape 1FC is designed to keep a clean situation after 2-3 rounds of vaping. And you can refill this pod via its top fill holes.
ONE Button, multi-use: Enjoy three different output levels by simply pressing the firing button three times. The LEDs will indicate the status of the battery and the output level. All operations within ONE button.
Power and Battery
Fast-charge capable: Fully charged in 15 minutes with USB-PD adapter
550mAh built-in rechargeable battery
Type-C DC 5V/2A
Pod
Geekvape ONE Pod
2ml Capacity
Top Fill System
Function
Draw Activation/Button Firing
3-level output adjustments
High – Green: 3.5V
Med – Blue: 3.3V
Low – Red: 3.1V
Specification
Output Mode: Constant Voltage Output
Output Voltage: 3.7V Max
Output Current: 5A Max
Battery Capacity: 550mAh
Display Method: 3LEDs
Atomizer Resistance: 0.8±0.1Ω/1.2±0.1Ω
Charging Port: Type-C DC5V/1A
Vaping: Draw Activation/Firing Button
Another pod kit from GeekVape—GeekVape Aegis One 780mAh Pod System Kit
2ml / 0.8ohm/1.2ohm / MTL experience / 3-level adjustable power output
Geekvape ONE, 2 days use after fully charged! Smooth MTL flavor with the optimized airway. Hallmarked drop performance. Leakproof top-fill pod. And a multi-purpose button. The long-lasting ONE is getting ready.
Overview
- Long-lasting ONE, 2 Days Use After Fully Charged: Fully charge for 2 days use, abundant power, always ready!
- The First Vape Pen with Aegis Design
- Optimized Airway Design. All for a smooth MTL experience: A special ‘S-shaped’ design has been adopted on the airway to make airflow smoother and throat-hit stronger.
- “Aegis” Hallmarked Drop Performance: To increase the durability of Aegis’ first vape pen, a stronger material Zinc Alloy was introduced on its shell, more resistant to shock and scratches.
- ONE POD, The Leakproof POD: The leakproof POD on Geekvape 1FC is designed to keep a clean situation after 2-3 rounds of vaping. And you can refill this pod via its top fill holes.
- ONE Button, Multi-use: Enjoy three different output levels by simply pressing the firing button three times. The LEDs will indicate the status of the battery and the output level. All operations within ONE button.
- Power and Battery
- 2 days use after fully charged
- 780mAh built-in rechargeable battery
- Type-C DC 5V/2A
- Pod
- Geekvape One Pod
- 2ml Capacity
- Top Fill System
- Function
- Draw Activation/Button Firing
- 3-level output adjustments
- High – Green: 3.5V
- Med – Blue: 3.3V
- Low – Red: 3.1V
Specification
- Output Mode: Constant Voltage Output
- Output Voltage: 3.7V Max
- Output Current: 5A Max
- Battery Capacity: 780mAh
- Display Method: 1LEDs
- Atomizer Resistance: 0.8±0.1Ω/1.2±0.1Ω
- Charging Port: Type-C DC5V/1A
- Vaping: Draw Activation/Firing Button
We recommend you the new arrival—ULTRONER KAMO 1400mAh AIO Pod System Starter Kit
4ml / 0.6ohm/1ohm / USB-C charging
- Lowest voltage: 3.3V
- Highest voltage: 4.2V
- Built-in battery capacity: 1400mAh
- Charging current: 700mA
- Resting current: <50uA
- Pod Cartridge capacity: 4.0ml
New colors of Vaporesso Sky Solo/ Solo Plus AIO Starter Kit
3.5ml / 0.8ohm / GT meshed / OMNI Board mini chip / Micro-USB charging
The SKY SOLO is the ideal starter kit for beginners - with only one button to get you started. With OMNI Board MINI inside, the SKY SOLO uses an advanced chipset, ensuring safety and ease of use. At the top of the device, you can change your flavor by simply twisting off the top cap and filling. Plus, the GT meshed coil enhances wicking, making the SKY SOLO super easy for you to take into the clouds!
Highlights
OMNI Board MINI: Stay Focused with Omni’s Advanced Chipset The OMNI Board MINI takes the most advanced features from Vaporesso’s OMNI Chipset and focuses it on safe and simple vaping.
GT Meshed: Get Satisfied with Flavor The GT Meshed coil maximizes interaction with the cotton, providing turbo heating performance and increasing the heating area, making for dense and flavorful clouds.
AIO: Featuring the all-in-one design, it’s simple, portable, and very affordable. Just press one button to start!
Built-in Battery: Adopting 1400/3000 mAh built-in battery to satisfy your all-day vaping.
Top Fill: Filling from the top, simply twist off the top cap and get SKY SOLO filled with your favorite e-juice.
Specifications
Tank Capacity: 3.5ml
Power range: ≤90W
Built-in battery: Power 1400mAh
Resistance range: 0.15ohm
New Arrival! VOOPOO DRAG S 60W 2500mAh VW Box Mod + PnP-X Pod Kit
5ml / 0.2ohm/0.3ohm / USB-C charging / GENE.TT chip / infinite airflow / intelligent wattage-matching
The new generation product not only continues the ultimate sensory experience of the previous generation but also derives five new appearances of Knight themes. Upgraded PnP-X pod with metal materials and convenient knob-filling on the top, every single detail is a salute to the knight!
Features
EVERY SINGLE KNIGHT CAN PERFECTLY PLEASE YOUR HAND: With ergonomic arc design, knight series products can perfectly fit the curvature of your fingers. When you are holding it by one hand, it will make you feel like holding spears to fight for honor. Enjoy your glorious moment.
UPGRADED PNP-X POD
POWERFUL MAGNET AS SIMPLE AS A KNIGHT: New upgraded 5ml magnetic suction pod, with konb-filling on the top, can provide the simplest, better sealing, and more hygienic E-liquid filling way. (Please let E-liquid stand for 3-5 minutes before vaping.)
AS FREE AS A KNIGHT: The knight series products bring an “Infinite Airflow System” that supports the adjustment of any airway. No matter which coil is used or what parameter is set, you can get the most comfortable experience through this system and enjoy the flavor freely!
DOUBLE CHOICE FOR BATTERY FEEL LIKE GUARDED BY A KNIGHT: Come with Type-C 5V/2A fast charging interface, the compact DRAG S PnP-X KIT & DRAG X PnP-X KIT fitted with 2500 mAh built-in battery and 18650 external battery respectively. Long-lasting battery life and fast charging make you feel like your belove vape mate is guarded by a Knight. (*18650 battery not included in the package)
AS SMART AS KNIGHT: The SMART model will automatically recognize the inserted coil and matches it with the best wattage. With an intelligent wattage memory function, even if you replug the atomizer, it can still remember your last setting after you adjusted the wattage.
GENE.TT AS BRILLIANT AS A KNIGHT: GENE.TT, the perfect combination of performance and delight, enables knight series products to ignite within 0.001s and provides multi intelligent functions such as PUFF recording, SCORE ranking, SMART mode, etc.
80W WATTAGE MAXIMUM AS POWERFUL AS A KNIGHT: DRAG S PnP-X KIT & DRAG X PnP-X KIT can achieve adjustable power of 5-60W and 5-80W respectively. It can bring you varying degrees of rich flavors and dense clouds in just 0.001 seconds.
BUTTON OR AUTO? BOTH FOR YOU: GENE.TT, the perfect combination of performance and delight, enables knight series products to ignite within 0.001s and provides multi intelligent functions such as PUFF recording, SCORE ranking, SMART mode, etc.
ONE PRICE, DOUBLE FLAVORS: DRAG S PnP-X KIT &DRAG X PnP-X KIT are equipped with two PnP coils of 0.2ohm and 0.3ohm. They will let you feel the PnP coils of big cloud with incredible flavors.
Mesh Coil PnP-VM1
Resistance: 0.3ohm
Power Range: 32-40W
Suggested E-liquid: Nicotine<=10mg
Mesh Coil PnP-VM6
Resistance: 0.15ohm
Power Range: 60-80W
Suggested E-liquid: Nicotine<=10mg
BIG THRILLS, SMALL BILLS: PnP-X pod is compatible with all PnP coils including RBA coils. By pulling and pushing easily, you can enjoy different vaping experiences fast and affordable.
EIGHTFOLD KNIGHT SECURITY GUARD
Overtime Protection
Short-circuit Protection
Overcharge Protection
Max Power Protection
Output Over-current Protection
Over-Discharge Protection
Over-temperature Protection
Battery Reverse Protection
Specification
Pod Parameters
Capacity: 5ml
Material: PCTG
Resistance: 0.2ohm(PnP-VM5) / 0.3ohm(PnP-VM1)
Mod Parameters
Material: Alloy + Leather
Output Power: 5-60W
Output Voltage: 3.2-4.2V
Resistance: 0.1-3ohm
Battery Capacity: 2500mAh Built-in Battery
I would like to share with you the new arrival vape kit----Eleaf iStick Pico Le 75W VW Box Mod + GX Tank Kit
5ml / 0.2ohm/0.5ohm GX coils / 1*18650 / USB-C charging
Eleaf iStick Pico Le Kit is one of the latest and greatest devices that makes itself perform and function flawlessly. The spliced leather and bright color contrast always hit your heart, you will immediately feel warm and like it, each one in a variety of colors to ensure that there is an offering for everyone. There are loads of features crammed into this remarkable device, first of all, the GX pod comes with 5ml vape juice capacity and utilizes its GX Coils, is born for clouds, and works for premium. According to AST tech inside the coil and the ability to fine-tune your airflow, which brings you the precise airflow control and super cloud, chasing a long-term use and desired result for the aftertaste.
It also delivers a thrilling adventure of vaping tech by its amazing iStick Pico Le Mod. In order to complement your own style of preferred vaping, it has the basic of powerful and exaggerated battery, powered by a single 18650 battery (not included) and max 75W output, it gives you a stable and carefree vaping experience. With its 510 connection, it is fit for all 510 threaded base atomizers, best for 26mm diameter.
Highlights
- Own your style with the refreshing design: The iStick Pico Le established itself as a member of the well-known Eleaf Pico series for its single 18650 structure with characteristic screw cap, as well as for its compactness and simplicity, while updated with a refreshing elegant leather look. Paired with the powerful GX tank that utilizes coils powered by AST tech, the iStick Pico Le kit delivers an enhanced flavor with denser clouds.
- Elegant, sleek, and lightweight: Featuring the stylish color block design, iStick Pico Le is the beauty in your hand. The use of leather material also offers ultimate portability for iStick Pico Le because of its lightweight.
- GX Coils, born for clouds: Supporting for higher watts, the GX coils with mesh structure bring denser clouds and better flavor, maximizing your vaping satisfaction.
- GX-K 0.2ohm Coil
- Wattage Range: 50-80W
- Coil Material: Kanthal
- GX 0.5ohm Coil
- Wattage Range: 25-45W
- Coil Material: Austenite (AST)
- GX-K 0.2ohm Coil
- Feel the difference: Feel the ultra-rich and pure flavor brought by the innovative AST-steel inside the GX coil which heats up evenly in an instant and supports a long lifespan.
- Heating up in 0.001s
- Boosting flavor
- Longer coil lifespan (2000 puffs)
- Reliable material
- Smart coil protection: The AST-steel of GX Coil coupled with the chip-set inside iStick Pico Le brings the smart coil protection. The device stops output when it detects a lack of e-liquid, protecting the coil from the dry hit.
- GX TANK: Combining simplicity and versatility
- Concentrated, directed, and smooth airflow
- Easy refilling without leakage
- Easy-to-use pod tank
- Signature Pico style: iStick Pico Le retains Pico’s signature battery cap design and single 18650 battery structure.
- High adaptability: iStick Pico Le supports for various tanks up to 26mm with a wider platform.
- Always ready to go: With USB Type-C and 2A fast charging, iStick Pico Le greatly shortens the waiting time for charging. And you could carry spare 18650 batteries to keep it always powered up.
- Compact as always: iStick Pico Le still retains compact in size, allowing you to carry it around with ease.
Specifications
- Battery: 1*18650 (battery sold separately)
- Tank Capacity: 5ml
- Output Wattage: 1-75W
- Charging Current: 5V/2A (USB-C)
New Arrival! BP Mods Pioneer MTL / DL RTA and Accessories
authentic / 3.7ml / 22mm diameter
The Pioneer MTL RTA is a collaboration with Dovpo and BP Mods, featuring a 3.7ml capacity, conical flavor chamber, and an interchangeable bottom 510 pin airflow system. Constructed from superior stainless steel, the Pioneer RTA can hold up to 3.7ml of eJuice within PCTG or ULTEM glass. Equipped with a single coil build deck, the Pioneer RTA vents directly below the coil structure with a threaded 510 pin airflow intake that can be changed without removing any coils, eJuice, or cotton. Covering the dual post build deck is a conical top cap, funneling vapor and flavor directly to the tongue, allowing the Pioneer RTA to extract the best flavor from your favorite e-liquid.
- 3.7ml capacity
- Dual Airflow Control Design: DTL & MTL
- 3-level of Innovative Airflow Control Pin: 1.5mm / 1.2mm / 0.8mm
- Hidden Airflow Control: Beauty rings affect airflow for a regular bottom airflow tank, it won’t happen to the Pioneer due to the hidden airflow design.
- Easy Fill Top Cap
- Chimney Straight Design: The Pioneer RTA was designed to have a bore from the top of the chimney straight up to the drip tip, we leave no room for vapor to gather and condense.
- 510 threading connection
- 22mm overall diameter
Today’s new arrival! Cthulhu 520 Tank for Boro Device & Cthulhu AIO
authentic / 4.2ml / w/0.8mm / 1.0mm / 1.5mm / 2.0mm / 2.5mm / 3.5mm air pins
- Special design to reduce L-shaped airflow effect
- The smooth and quiet vape experience
- Airflow: 0.8mm, 1.0mm, 1.5mm,2.0mm,2.5mm,3.5mm, 4.5mm(without air pin)
- 4.2ml capacity
Another new arrival! Wotofo Gear V2 RTA Rebuildable Tank Atomizer authentic / 3.5ml / stainless steel + PCTG / 24mm diameter
Enter coupon code MAP on the shopping cart page to see our unbeatable price.
Authentic Wotofo Gear V2 RTA Vape Atomizer has been engineered to make a whole with its top cap for expanding the depth of flavor path and vape experience. It creates its own performance to enlarge the working space, offers the best opportunity for every drop of your e-juice, the compressed chamber can produce massive flavor. The advantage it has is its flexed side airflow control ability, which can calculate your air consumption and decrease e-liquid condensates. Come with its 3.5ml vape juice capacity and top filling system, it works best between 40W and 55W output. It measures 24mm in diameter and acts the next level in your vaping journey. Not only is it’s functional, but look at this fine glass artwork, made by German PEEK for its insulator, Stainless Steel, and PCTG for its appeal, simple but stylish.
Product Feature
- Gear V2 RTA is much more than a compact single coil RTA. The essence of this upgrade starts with the idea of taking its original simplicity to a new level while boosting its performance enormously.
- To further shorten its ultra-short air passage for rapid flavor delivery, the drip tip has been structured to make a hole with the top cap.
- We optimized the vaporization chamber to enlarge its working space. Now its compressed chamber can produce intense flavor like a monster, bringing out every note of your juice flavor to the most.
- The original pan head screws are kept on the deck for fast building. Two little airflow walls are added to the deck to smoothen the vapor.
- Gear V2 is a fixed airflow RTA, meaning the airflow is not adjustable. But you bet this is the best airflow design for this buddy. It has the optimal air amount calculated by our engineers. In the meantime, such a design eliminates condensates seeping down through the gaps when there’s a control ring.
Product Information
- Diameter: 24mm
- Height: 38.5mm (with drip tip & 510 pin)
- E-liquid Capacity: 3.5ml
- Filling Method: top filling
- Main Materials: SS + PCTG
- Coil Type: single wire coil
- Airflow Type: fixed side airflow
- Insulator Material: German PEEK
- Threading: 510 thread
- Coils Included: Framed Staple Clapton
- Material: Ni80
- Resistance: 0.33ohm
- Inner Core: 28G+38Gx9+28G
- Outer Wire: 36G
- Internal Diameter: 3mm
- Power Range: 5-60W
- Best At: 40-55W
