Ambition Mods Bishop³ Cubed RBA Bridge Tank
authentic / 5ml / 316 stainless steel + PCTG
GeekVape Wenax M1 16W 800mAh Pod System Starter Kit
authentic / 2ml / 0.8ohm(14-16W) or 1.2ohm(10-13W) / 34g lightweight / tight & mellow MTL flavor / USB-C charging
Details:
A cigar-shape vape pen with breathtaking lightness. Steady output performance, vaping always ready.
A 2ml clear-view pod with lip-comfy drip tip, free your hands. Tight and mellow flavor chills you in every piece of air. Wenax M1 makes the air within reach.
Overview
Cigar-shape, Handy Vape, Light in Palm: Shaped like a cigar, Wenax M1 is incredibly light, weighing only 34g.
Clear-view Pod with Lip, Comfy Drip Tip
A clear view for the liquid level. The ideal reminder to refill your 2ml pod.
The rubber encircled drip tip makes bite-vaping possible. Together with auto-draw, you may free your hands while still enjoying an outstanding MTL experience.
Consistent Power: The power output of Wenax M1 keeps its pace in any case and its steady performance makes vaping always ready!
Tight & Mellow MTL Flavor
The combination of tight draw experience and adaptive power tech elevates the MTL flavor to new heights.
Tight draw brings gentle yet filled-in-the-mouth cloud experience.
12-16W adaptive power tech will automatically match with the pod and deliver the vapor mellow flavor.
Refinedly-made Aluminium Shell: Wenax M1 is crafted from anodized aluminum, a smooth-to-the-touch material that strikes the optimum mix between aesthetics and hand comfort, yet is solid to shock and scratch, and uneasy to slip from hands.
Parameters
Output Power: 9-16W
Resistance Range: 0.4-3ohm
Battery Capacity: 800mAh
Low Voltage: 3.2±0.1V
Charging Specification: USB-C
Charging Port: 5V/1A
Longest Vaping Time: 10S
Stand-by Current: ≤15uA
Capacity: 2ml
Coil Resistance: 0.8ohm(14-16W) or 1.2ohm(10-13W)
Hellvape SERI RDA Rebuildable Dripping Atomizer
authentic / stainless steel / series coils / supports up to 200W / honeycomb AFC / 26mm diameter
Details:
Authentic Hellvape SERI RDA Vape Atomizer will bump you up, measuring a diameter of 26mm, pioneered a new parallel structure of coil combination, available for max 200W output, and delivering combo vapor for cloud trick. The series coil design accepts the sum of all coil resistance, one main point is meticulously considered for your coil resistance, it should be used to supper low resistance, this RDA emphasize both dual and triple coil for option, when you choose dual coil configuration, it should install the short circuit connection. It creates the biggest clouds possible with max 200W output. Configuration of the airflow settings is very paramount; SERI RDA offers restricted airflow with honeycomb airflow. Along with its 6mm deep juice well, it supports more e-juice consumption.
Series Coils Design: A new coil connection way is different from the parallel connection, the final resistance is the sum of all coil resistances.
Up to 200W Super Power: Allow using 3 pcs of super low resistance coil, generate huge and dense vapor, match your high power mod perfectly.
Dual series coil (Install the short circuit connector) and triple series coil for option
Adjustable Honeycomb Airflow: SERI RDA will bring you super huge cloud and delicate flavor with honeycomb airflow.
6mm deep e-juice well
510 threading connection
26mm overall diameter
YDDZ & PSDBD Dispersion MTL GTA Vape Atomizer
Authentic / 2.3ml / stainless steel / 22mm diameter
Details:
Authentic YDDZ & PSDBD Dispersion MTL GTA 22mm is a high quality MTL GTA with comfortable handling. Dispersion MTL GTA comes with 22mm single coil deck and 2.3ml capacity with top filling design. Dispersion MTL GTA features a pair of air pins with a diameter of 1mm and replaceable air pin for setting the airflow directly below the coil in 5 steps (0.8, 1.0, 1.2, 1.4, and 1.6mm) to offer better flavor.
Stainless steel construction
Capacity: 2.3ml
Height with drip tip: 58.6mm (without drip tip 41mm)
Bottom airflow size: 0.8 / 1 / 1.2 / 1.4 / 1.6 mm
Side airflow: 2 x 1mm
Independent airflow adjustment (side / bottom)
Classic design
510 threading connection
22mm overall diameter
HCigar AKSO 420mAh Disposable Kit
Authentic / 2ml Capacity / 1.8ohm Resistance / Approx.500 puffs / 5% Nicotine
DOVPO Clutch X18 Dual 18650 Mechanical Mod
Authentic / locking system / fits up to 28mm atomizers
Details:
DOVPO Clutch X18 Mod is another great mod created by Signature Tips, Mike Vapes & DOVPO! It is the most anticipated parallel mechanical mod created by the top leaders of the industry. It has tons of safety features first for any parallel type mechanical mods! This mod is not for new starters or beginners. Customers need to obey the battery safety principles. Only used by experienced vapers who are fully familiar with Ohm’s Law! The equipment is made of solid aluminum billets and then finely sandblasted. The anodized body is realized in a simple style, ergonomic, compact in appearance, and monotonous in color. A rectangular fire button is mounted on the top of the narrow curved side. Two adjustable brass contacts are placed on the bottom. In order to increase the landing diameter from 25 mm to 28 mm, a pair of extra side panels are provided. Behind the wide side, walls are silver-plated contact blocks and battery compartments for two external 18650 batteries. Dual 18650 parallel installations. To adjust the steel connector to fit the height of the battery, you need to twist the contacts on the bottom of the case. Inside the device, you notice a small protruding pin which if you remove the rear battery cover, allows you to lock the fire button on and off. Perfectly hidden behind the rear battery door. Up top is the hybrid 510 connection, hybrid simply means that your chosen RDA or RTA will screw directly onto the positive pin of the battery, meaning there is less of a volt drop between contacts. The most interesting feature of this product is the “fuse”. The unique fuse protection ensures safety. It is located at the bottom of the module and is specially designed for currents not exceeding 37A. It is replaceable and 5 extra included.
- Hybrid 510 connection
- Solid silver contacts
- Unique locking system for safety
- Fine Shot Blasted & Anodised
- Machined from Solid Billet Aluminium
- Commercial Grade 3D Printed Internal Sled
- Dual 18650 Parallel
- Fused Protection For Battery Safety
- Locking Mechanical
- Two Sets Of Doors 25mm & 28mm
- Solid Fuse Bridge (Separate Purchase)
- Fits Up To 28mm Atomizers
Warning :
The Clutch X18 is a Parallel Mechanical Mod.
Use a pair of identical married batteries that are always charged and discharged together. MUST have experience with using these types of products. MUST know Ohm’s Law and battery safety. Use at your own risk.
Auguse Era RDA Rebuildable Dripping Atomizer
Authentic / 316 stainless steel / 22mm diameter / w/BF pin / RDL & MTL flavor
Enter coupon code MAP in the shopping cart page to see our unbeatable price.
Details:
The Authentic Auguse Era RDA Rebuildable Dripping Vape Atomizer is made from 316 stainless steel in 22mm diameter. The Auguse Era RDA is with 180 degree juice circulation design to balance moist for both cotton. Comes with PCS Air Pins: 0.8mm / 1.0mm / 1.2mm / 1.5mm / 1.8mm / 2.0mm / Blind, for MTL and RDL vaping. Comes with Bottom Feeder / BF / Squonk Pin.316 Stainless steel construction
Comes with Bottom Feeder / BF / Squonk Pin
Quad-pole deck, single / dual coil building
7 PCS Air Pins: 0.8mm / 1.0mm / 1.2mm / 1.5mm / 1.8mm / 2.0mm / BlindBlind / 0.8mm / 1.0mm / 1.2mm for MTL vaping (mouth to lung)
1.5mm / 1.8mm / 2.0mm for restricted DL Vape (RDL)
Suspended cooling fin for better heat dissipation
5.7mm deep juice well
180 degree juice circulate, balance moist for both cotton
510 threading connection
22mm overall diameter
Authentic / 4ml & 5ml / 0.15ohm & 0.3ohm UniPlus coil / 24.5mm diameter
Enter coupon code MAP in the shopping cart page to see our unbeatable price.
Details:
OXVA Unione PnM Tank, the next generation subohm tank. PnM (Pyrex Tube and Magnetic Connection) combines the performance of the Subohm tank with the convenience of pod tank, allowing you to switch coils in seconds while enjoying the clean flavor provided by pyrex glass.
Features
Highend Pyrex Glass Design: Pyrex glass gives your pure flavor and high end vaping experience.
Change Coils in Seconds: Magnetic connection makes you change coils super easily.
RDA-Style Bottom Airflow: Bottom airflow gives you top flavor.
Uniplus System: Tiny beasts also have top performance.
Parameters
Capacity: 4ml(Straight Glass) & 5ml(Bubble Glass)
Spec of Coils: Uniplus 0.15ohm Mesh Coil (70-80W A1 ) & Uniplus 0.3ohm Mesh Coil (35-40W A1 )
Material: Pyrex Glass & SS
FastTech Sitewide Spring Sale 10% Off
Dear valued customers,
Spring is when life’s alive in everything. Let’s give a big cheer and join our 10% off Sitewide Spring Sale!
Sitewide Spring Sale
Offer: Sitewide 10% off
Valid Date: Mar 29, 2022 - Mar 31, 2022 (UTC-6)
Coupon Code: SPRING2022
Customers can pay via Paypal or credit card for the gift card to get an extra 3% free value instantly.
YIHI SXmini MK Pro Air 700mAh Pod System Starter Kit
Authentic / 2ml / 0.8ohm / MTL & RDTL flavor / USB-C charging
Details:
Authentic YIHI SXmini MK Pro Air Pod System Vape starter Kit signatures a 2ml refillable vape juice capacity that is visible to check your e-liquid. The ergonomic mouthpiece creates a tight friction sleek that brings a comfortable feeling when you are vaping, satisfying both MTL and RDTL vaping needs. No more sticky thread to screw on or off, it offers a magnetic connection for time-saving and delivering power. Associated with the MK Pro Air Pod Cartridge, it boasts a 700mAh internal battery that is ready for a longer session and can be rapidly charged with a Type-C connection, which ensures you all-day use, never worry about the outdoor occasion. It takes advantage of the YiHi SX366M chipset to support the kit. With its LED Indicator lights, it can remind you to charge your kit. The Anodized Aluminum material made a skin-like tough feel on the fingertips and a streamlined body for its wonderful appearance. The pod fits for MK Pro & MK Pro Air kit only and can meet your imaginable sense of vaping and the unprecedented experience of mind and the tip of the tongue.
YiHi SX366M chipset
700mAh internal battery
Capacity: 2ml
LED indicator lights
Type-C charging
Anodized aluminum construction
Satisfy Both MTL And RDTL Vaping Needs
Plug ‘n’ Play Manner
Steam Crave Hadron RDSA Atomizer
Stainless steel / 30mm diameter / With BF pin
The authentic Steam Crave Hadron RDSA vape atomizer is made of high-quality stainless steel, the Rebuildable Dripper Squonker Atomizer convinces with its great workmanship and absolutely comfortable operation. Depending on the installed 510 pin, the Hadron RDSA can be used as a classic dripper or for squonking.
- Ergonomic 810 wide-bore resin drip tip
- Material: stainless steel
- For absolute top taste and huge clouds
- Modern and compact design
- Comfortable postless deck for dual coil setups
- For windings with an inner diameter of 3 to 5mm
- Parallel or serial coil setups
- Suitable for high-performance windings
- Generous liquid tub
- Infinitely adjustable bottom AFC and honeycomb side AFC
- For DL and RDL vapor behavior
- Compatible with Pumper Kit (not included)
- 510 threading connection
- 30mm overall diameter
In the Hadron RDSA Box You Will Find
- 1*Hadron RDSA (Postless Deck Fitted)
- 1*Spare Bag of O-rings & Screws
- 1*Squonk Pin
- 2*Coils
- 1*Allen Key
- 1*Steam Crave Sticker
- 1*Manual
The authentic Steam Crave Hadron Mesh RDSA vape atomizer is made of high quality stainless steel and combines comfortable operation with an outstanding vaping experience. The Hadron Mesh RDSA can be used both as a classic dripper and for squonking (with the including 510 squonk pin). The Hadron Mesh RDSA is equipped with a comfortable and spacious dual mesh deck with space for 2 mesh strips.
- Ergonomic 810 wide-bore resin drip tip
- Material: Stainless Steel + PEEK
- Supports medium to high wattage vaping
- Side and bottom adjustable airflow
- Comfortable dual mesh deck for 2 mesh strips
- Practical mesh fixation using clamps and side screws
- Generous liquid tub
- Infinitely adjustable top to side airflow with honeycomb air inlets
- For DL and RDL vapor behavior
- Compatible with Pumper Kit (not included)
- 510 threading connection
- 30mm overall diameter
In the Hadron Mesh RDSA Box You Will Find
- 1*Hadron Mesh RDSA (Mesh Deck Fitted)
- 1*Spare Bag of O-rings & Screws
- 1*Squonk Pin
- 2Mesh Strips(SS316L, 1616.8, 0.15ohm)
- 2Mesh Strips(Kanthal A1 Square, 1616.8, 0.15ohm)
- 2*Mesh Shoelace Cotton
- 1*Mesh Tool
- 1*Allen Key
- 1*Steam Crave Sticker
- 1*Manual
YIHI SX Nano S 900mAh Mod + SX-ADAv2 Atomizer Kit
Authentic / 2ml / 0.6ohm / MTL flavor / ESS driver / USB-C charging
Details:
Highlights
Better MTL Experience: With the market filled with bland repeated products, an innovative device is like a fresh breath of air. The MTL experience is highly demanded yet most products deliver inferior taste and outdated technologies.
SX Nano S introduces a new approach to deliver e-liquid into the coil, together with a highly sophisticated temperature control eliminates dry hits while keeping a relatively higher power to increase flavors.
Upgraded Technology: Since we first introduced the ESS Driver in the X class and SX Auto, SXmini has taken past issues seriously, the new generation of ESS-Driver is smarter, more reliable, and stable. Occasional reported issues in past models such as overflooding got taken care of by upgrades in 3 aspects: Material used, Atomizer design, and full year of thorough software refinements.
Electronic Spray System (ESS): ESS Driver - the heart and soul of the SX Nano S automatically transfers liquid from the reservoir into the coil.
ADAv2 Disk Coil & Deck
Simplicity & Automation: Although it packs advanced technologies inside, we made sure to develop an effortless and intuitive UI. 3 simple presets to choose from: Cold, Normal and Warm. The ESS driver will do all the work in the background. Delivering a seamless enjoyable and most importantly safe vape session.
Specifications
Powered by the YiHi SX681J
ESS Driver
Battery capacity: 900mAh
Reservoir capacity: 2ml
Reservoir material: PETG
Max Charge: 5V/1A
~60 min to full charge
Quiescent Current <3uA
ADA mode supported coils: SX ADA v2 0.6ohm
In Stock! YiHi SXmini SL Class V2 100W TC VW VV Box Mod
Authentic / 1*18650/20700/21700 / USB-C charging / YiHi SX730 chipset
Details:
YiHi SXmini SL Class V2 Box Mod is powered by a single 18650/20700/21700 battery with max 100W output. YiHi SXmini SL Class V2 Mod features YiHi SX730 chipset and VW, VV, TC work modes & Soft, normal, Strong, SXi-EQ1, SXi-EQ2, SXi-EQ3 flavor modes to meet different needs. SXmini SL Class V2 is equipped with 0.96-inch IPS-Farb-Display to show vaping information.
Features:
YiHi SX730 chipset
Powered by a single 18650/20700/21700 battery (battery sold separately)
Soft, Normal, Strong, SXi-EQ1, SXi-EQ2, SXi-EQ3
0.96-inch IPS-Farb-Display
Multiple Protection
Reverse Polarity Protection
Output Short Protection
Low Resistance Protection
Battery Low voltage Protection
Battery overcharge protection
Steam Crave Hadron Plus DNA250C Mod + Hadron Mesh RDSA + Pumper
authentic / 12ml / dual mesh deck / w/BF pin / 30mm diameter / 1-200W VW / 200-600’F TC / 2*21700/20700/18650
Details:
Features:
· DNA 250C Chipset
Replay Mode: Capture the flavor and satisfaction of the “perfect puff”, and provide the same level of performance and consistency for all subsequent puffs.
Watts Boost: Briefly increase the power delivery at the start of firing to reach your desired vapor output faster.
Accurate Temperature Control: By directly measure and limit the temperature of the heating coil, the Hadron Pro DNA250C is able to prevent the coil becoming too hot and provide a much stable performance.
· Firmware Upgrade
· Multiple Protections
Atomizer Protection
Low Resistance Protection
Onboard Reverse Polarity Protection
Short Circuit Protection
Overheat Protection
Low Voltage Step Down Protection
· Max 200W Output: Hadron Plus is able to offer a tremendous range with the maxmium wattage output 200W
· USB Charging
Built-in Onboard Charger
Fast Charging
Pass Through
· Dual 21700 for Long Lasting, Open/Close the Battery Door Easily
Basic Parameter
· Battery: 2*21700/20700/18650 (Battery Sold Separately)
· Input Voltage: 6-8.4V
· Battery Voltage: 3-4.2V
· Output Voltage: 0.2-8V
· Power Range: 1-200W
· Current Range: 0.5-30A
· Max Charging Current: 3A (2A Suggested)
· Temperature Range: 200-600’F
· Coil Resistance Supported: 0.1-3ohm
· Coil Material Supported: Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90
· Screen Pixel: 0.9’’ (80*160 pixel) full color TFT
· Body Material: Aluminum Alloy
Hadron Mesh RDSA
The authentic Steam Crave Hadron Mesh RDSA vape atomizer is made of high quality stainless steel and combines comfortable operation with an outstanding vaping experience. The Hadron Mesh RDSA can be used both as a classic dripper and for squonking (with the including 510 squonk pin). The Hadron Mesh RDSA is equipped with a comfortable and spacious dual mesh deck with space for 2 mesh strips.
· Ergonomic 810 wide-bore resin drip tip
· Material: Stainless Steel + PEEK
· Supports medium to high wattage vaping
· Side and bottom adjustable airflow
· Comfortable dual mesh deck for 2 mesh strips
· Practical mesh fixation using clamps and side screws
· Generous liquid tub
· Infinitely adjustable top to side airflow with honeycomb air inlets
· For DL and RDL vapor behavior
· Compatible with Pumper Kit (not included)
· 510 threading connection
· 30mm overall diameter
Pumper
The authentic Steam Crave Pumper Kit will support Squonking without a squonker mod. The Pumper Kit is perfectly fitting for the in-house hadron and hadron mesh RDSA vape atomizer, but also suitable for all other RDSAs with the corresponding diameter, Steam Crave’s chic pumper with a diameter of 30mm presents itself in the characteristically elegant Steam Crave design made of stainless steel and glass and in two elegant color variants. The Pumper tank holds 12ml and can be filled quickly and easily via a side opening with a tight-fitting metal screw plug. On the opposite side is the pump button, which is also made of stainless steel and which activates the manual pump function.
· High-quality pumper kit for “squonking”
· Developed for the Steam Crave Hadron / Hadron Mesh RDSA Vape Atomizer
· Compatible with a variety of other RDSAs
· Elegant Steam Crave design
· Material: stainless steel + glass
· Diameter: 30mm
· Standard 510 overhead connector for RDSA
· Standard 510 thread on the bottom for mod
· Compatible with almost every mod with a 510 connection
· 12ml tank capacity
· Comfortable side fill
· Manual pump function via metal button on the side
· Fast and safe liquid delivery
Smoktech SMOK Nfix PRO 25W 700mAh VW Pod System Kit
Authentic / 2ml / 0.9ohm/1.2ohm LP1 MTL coils / airflow adjustable / leakproof / USB-C charging
Details:
The Nfix PRO couples exceptional performance with a classic, minimalist design. It adopts a simplistic body design with high-gloss finish, accompanied by refined sandblasting oxidation technique for decent luxury. Powered by a 700mAh built-in battery, it features an adjustable power from 5W to 25W. It offers an adjustable airflow control allowing you to adjust the intake volume and customize the draw. Innovation keeps changing the vaping experience.
Features
- Elegance In The Palm Of Your Hand: With its outstanding color scheme, the Nfix PRO presents dazzling colors, for a better look and more comfortable hand feel. Get the look to fit your style, helping you to shine in any occasions.
- An Exciting Slide: Simply move the slider to increase or decrease the amount of air intake, so every inhalation is completely satisfied.
- Fuel Your Life: Be ready to go after just 70 minutes for a full charge via the 0.7A charging current.
- Always Keep Going: The 700mAh battery lets you perform well in every puff while allowing you to enjoy your favorite flavors.
- A 0.69inch Display Of Clarity: The 0.69inch OLED screen grants you more clear and intuitive vape data.
- 25W Max Power Output: Press the power button 3 times to enter the power setting interface. Press the power button to adjust the power from 5W to 25W.
- Draw-Activated Mode: Inhale through the mouthpiece to enjoy the real taste of every puff, and check the time of each puff via the screen display, with the while light on.
- Go Smoothly, Perform Powerfully: The LP1 coil series, whether the dual coil or meshed coil, seamlessly cooperates with the Nfix PRO pod ensure the abundance of flavor and vapor in the pod.
- Rich & pure taste
- Abundant & smooth clouds
Specifications
- Battery Capacity: 700mAh
- Resistance Range: 0.6-3ohm
- Power Range: 5W-25W
- Standby Current: <50uA
- Input Voltage: 3.3-4.2V
- Output Voltage: 2-4V
- Charging Voltage: 5±0.2V
- Charging Current: Max 0.7A
- Overcharge Voltage: 4.3±0.05V
- Over-discharge Voltage: 2.4±0.05V
- Overcharge Current: 1.75±0.6A