As long as you’re happy with what you’re vaping on, good for you.
Personally I don’t care for squonking. It just introduces another factor that has its pros and cons (e.g. cleaning even more bottles). RDA’s & RTA’s are the way to go for me. There’s also not a great selection of squonking mods with great battery capacity (I’m also not allowed to buy hardware online so I have to stick to vape shop selections which are miserable at best).
I don’t really agree with your issues with RTAs though, there are more than enough choices that are easy to wick and have great flavor. To each his own though…
As long as you’re happy with what you’re vaping on, good for you.
Never heard of Steamcrave? You should really join the train
I also got the Profile Unity and if it’s any consolation the glass broke on mine right after unboxing. Was attempting to remove the base so I could give it a quick cleaning and glass split in half.
I still was able to get it going though using the spare glass. Wotofo needs to start including more robust glass for the Unity. My sense is that they are aware of the issue, but rather than upgrade the Pyrex they provide their vendors with overpriced spares.
@natbone please don’t be quick to judge the merits of RTA’s based on this one bad experience. The Unity and many other brands are excellent atomizers even though I’ve never used one that was 100% perfect.
Oh I’ve heard of Steamcrave my friend and I’m already on the train (well sort of). I’ve actually got an Aromamizer Supreme RDTA V2 here at home. Started off OK but I found it hard to get the wicking just right, even after exhaustive mining of information from my family here on ELR and countless video tutorials online. For some reason I just couldn’t get the wicking down. To make matters worse I started getting leaking issues (yeah, unheard of I know) so I just put it down to user error/incompetence.
All is not lost though! I now use it in dripper mode. Took out the chimney section and glass and use it with the single coil deck. Read some comments on Reddit where they considered it a sub-par dripper but I find it pretty nice actually. Loving the flavour it gives me and it looks sexy as all hell in my opinion. Close the airflow half way down and toke away on a 0.35 ohm single coil at 30-35 watts and I’m a happy camper indeed. Each to their own eh? Thanks for looking out for me though. You’re a good bloke.
Not the best of photos but here he is ready to give me some “Butterscotch Roll” goodness. One of my own concoctions (somewhat average I must say) with Butterscotch, Caramel, Cream, Sweetness and Cinnamon Roll (all Flavorah). It’s not too bad but definitely needs re-working. Cheers brother…
Your preaching to the choir, simplicity will win out over unneeded complexity every time.
That is why I LIKE em. To each their own I suppose.
To each their own. I use both. But you have just stated exactly why I don’t buy anything from WOTOFO. Never had anything but a problem with them.
Well, I finally got the thing working. I have to say I’m impressed. It’s the first RTA I’ve tried that rivals the flavor production of RDAs, including my favorite, the Profile.
As someone above mentioned, it is easier to switch out flavors with an RTA and that’s what I intend for its use, as an easier way to try multiple recipes.
I have to disagree with that statement. RDA’s, to me, are much easier to swap flavors due to their simplistic design. Rinse, re-wick, drip.
RTA’s are a bit more involved because they generally have more pieces so disassembly, rinse, re-wick, reassemble and refill. Requires more time.
If I’m dripping, I agree. It’s the squonk bottle issue that I find a pain. I can put multiple lemon recipes into a bottle but that’s the extent of it.
Never say never @natbone. I have a lot of nice gear. Squonks,rda’s,rdta’s,rta’s, and still occasionally use a genny for nostalgia.
Recently I had been in mostly squonk mode along with my KF5’s
Before I came across an rta I thought looked good. After I tried the clone I bought a couple more since I was really diggin this one.
At the end of the day I have not squonked in 2 months now.
Vaping is ever changing and you don’t know what tomorrow may bring so keep your mind always open!
Since I have no squonk experience, I always wondered about it… when swapping distinctly different flavor profiles (e.g. a custard after a mint), do you clean the connecting parts from the mod as well? Does the flavor remain?
Seems like a bit of a nightmare to me. Dripping is so much easier: rinse, wick, done. Most times I don’t even screw the RDA off my mod.
That is so spot on. I’ve moved through a number of phases in vaping. It does keep it interesting, doesn’t it?
Dripping is by far the easiest way to vape. I tend to drip at night when I try new flavors and recipes.
With squonk mods I always clean them out when swapping flavors, unless it’s the same profile. It’s tedious more than anything else. I get around it by having 4-5 squonks setup at a minimum at all times.
Wow … I had no idea. OK, now I’m really convinced this is seriously not for me
I’ve been vaping on 1 RDA for the last week, 1 mod, 2 sets of batteries. I’ve got 2 Aromamizer Plus’es if I’m on the road and I barely ever have both of them with me.
What on earth do you do when you travel, have an extra piece of luggage just for your vape gear?
Lol, I carry 4 generally. I drive for a living, just local for the last 10yrs. But there is always the possibility of being stuck overnight somewhere so I choose to have both enough battery life, juice and variety to get through just in case.
Never want to put myself in a position to consider buying the stinky’s in a bad situation.
Lol…last summer I went to Thailand and Sri Lanka. I brought two beater mods with two tanks and two clone RDAs. It was ok, but I did miss my squonks. I was really concerned about having it all confiscated in Thailand. When I go to the US, I bring my squonks.
Glass piece on my Unity shatered as soon as I put it on (the smaller one)
I ordered two replacements.
Didn’t get any issues unscrewing anything tho. But I had juiced up most of my tank to try and lube a bit.
Also, have you ever tried using latex gloves to unscrew shit? It works wonders on my stuff anytime something is too tight.
I’m hoping you don’t give up on this RTA as it’s an amazing one. I have multiple RDAs now and this one sits on top of my drag2 permanently (unless I’m cleaning this or rewicking)…
Btw, to anyone having issues wicking getting bad flavor:
I wrote this a while back:
Well I got my own one now with a glass tank and all, and I I can say is its absolutely amazing, I dont know how I ever did without it. the wicking is INCREDIBLE. My cotton is SOAKED all the time, and its got an 8ml tank. Im only telling you because this is my first one with glass, I know youre a single coil guy and this is double, Vapefly Brunhilde… I doubt I will ever go back to my others. And you can drip it
Duh!!! No, I never thought of using gloves. I will now.
I contacted Wotofo about getting spare parts. The glass tubes can be had on FT for cheaper, but you can get everything else from Wotofo. The piece I need is called the “upper cover fixing seat” and it costs $1, plus $8 shipping, lol. I bought 3 just to ease the sting.
Mine has been on my Drag for a few days now. I was having a hard time wicking it with rayon which is all that I use in my Profile RDAs. So I used cotton and it’s been working great. I’m very impressed with the flavor and the airflow, which I think is better than the RDA.
Nice write up on the wicking. I think I was overdoing the rayon now that I’ve seen what you do. I’ll give it a try your way when I get my lazy butt around to it.