Looking for some good links

General The Pub
27

Well speaking of f ups lol, knocked my mod over making you this vid @Oldguynew2diy hehe…

These weren’t bad, and had minor dark spots, pinched, stroked, and nice and even firing.

7 Likes
28

Yep. It a plyers with padded jaws. It is used to straighten twists in tri-core Clapton’s.

Download a coil calculator. For building wire. Always helps to have a plan before you start building. Free for download.

4 Likes
29

Cool thanks.

3 Likes
30

Well said @rcleven!!

Interesting… Not aure if this is a “Good” or “Bad” thing. :rofl:

00:43 :face_with_peeking_eye:

2 Likes
31

What rda are you looking for a tutorial on?

4 Likes
32
3 Likes
33

Eas gifted a Dead Rabbit 3 RDA. Have searched and watched a few vidoes. None so far has actually explained anything as well as here.

5 Likes
34

I always run by RDA’S with only one coil @Oldguynew2diy. Juat make sure she’s in the center of the atty- and away you go.

5 Likes
35

Cut the coil legs at 5 mm, drop them in, position them so the airflow is hitting the coils smack dab in the middle of the coil or a smidge lower. All the DR RDA’s builds are similar. Make sure your cotton is tight within the coil, but not too tight or you’ll loose flavor. Tight enough that if you pull on your cotton it’ll pull your mod over while doing it. Too loose and you’ll get spit back. Thin your cotton at the ends, cut to the top o-ring and tuck it in. Make sure to dry burn your coils at a low wattage at first (15-20 watts) to get hot spots out. You can raise the wattage slowly and strum using ceramic tweezers. It’s a nice rda!

7 Likes
36

Thank you for that detailed tip. Appreciated.

4 Likes
37

Are you good @Oldguynew2diy ?! I can do a quick Zoom meeting if you need?!

4 Likes
38

I think I am good with enough information to move forward. Likely a tomorrow project as tonight is a cosplay project. :smile:

4 Likes
39

Thanks for those links

4 Likes
40

Thanks for that. Makes things make more sense when i understand what going a bit more. Hopefully nothing buggered on the mod.

4 Likes
41

in the future let people know what RTA RDA or any other device you want help with, ideally in the title

lots of things are specific to your gear

4 Likes
42

That was probably the smallest crash that mod has seen @Oldguynew2diy, :).

5 Likes
43

Lol…yeah mine has taken some really big hits/falls.

3 Likes
44

oh yea make sure you wash your hands right before you wick or you’ll be sorry

7 Likes
45

Oils from the hands?

5 Likes
46

Yessiree Bob. Oils and salts from hands, and same for coils (another reason for the dry burn)

5 Likes