OXVA Vativ Full Kit will brings the vape experience of the Mod Kit to a new level. It can losslessly switch between Box and AIO, is compatible with both Unione tanks and cartridges. What’s more, it contains both Unione PnM Tank and Vativ Pod in the package. Designed with built-in 510 connector and boost chipset, Vativ will achieve the most stable power output. It is easy to use, you can replace batteries in seconds and switch the coils in seconds. The chip can intelligently match the variable values with new VPC mode. Vativ Mod Kit supports single 18650 battery, adopts Uniplus coils. The Unione PnM Tank has 4ml capacity with straight glass and 5ml capacity with bubble glass. And the Vativ Pod has 4.5ml capacity.
Details:
Lossless switch between Box and AIO
Built-in 510 connector (+Power/Flavor)
Boost chipset (+Power)
100W output comparison chart
So much easy to use
4 modes: Smart & Power & Volt & VPC
Compatible with Uniplus coils
Compatible with both Unione tanks and cartridges
Super fast fire: speed＜0.002s
Convenient magnetic battery door
Vapelustion Hannya II 2 Mod
Vapelustion Hannya II Mod is the upgraded version of original Hannya Mod with more lightweight and exquisite appearance. It has 2 colors and 4 replacement art panels that features surface metal relief and scratch-resistant coating. Powered by overally upgraded chip and dual 18650 batteries, Hannya II Mod has 230W max output and 0.015s instant ignition. With the 510 stainless steel interface, Hannya II Mod is compatible with most atomizers. In addition, the bypass/power/TC mode (TC mode supports Ni/Ti material atomizer) available here. It also adopts the full digital DC/DC converter with synchronous rectification to provide high power conversive efficiency and maximize the battery life.
Details:
Upgraded version of original Hannia Mod
More light to carry & exquisite in appearance
2 colors, 4 different replacement art panels
Metal panel design, easy to use and durable
510 stainless steel interface to fit for most atomizers
Overall chip upgrade,0.015s instant ignition & 230W max
Two external 18650 batteries with Type-C charging
Supports bypass/power/TC mode (TC mode supports Ni/Ti material atomizer)
Adopts full digital DC/DC converter with synchronous rectification
Vapelustion Hannya Nano Pro Kit is powered by a built-in 700mAh battery with 13.6W output power and Type-C charging. It features 0.8Ω coil resistance, 2ml e-juice capacity and 2 different airflow. It also has four different replacement panels with metal panel design. In addition, the air switch design allows you to smoke directly by inhaling without pressing any button.
Details:
Built-in 700mAh battery with compact size
USB Type-C charging
2ml e-juice capacity, 2 different airflow
New design atomizer, 0.8Ω coil resistance
Four different replacement panels
Metal panel design, easy to replace and durable
Air switch design to smoke directly by inhaling
GeekVape Wenax K1 SE Kit
GeekVape Wenax K1 SE Kit is a super-light starter kit. It is constructed with amazingly silky body with breathtaking lightness. Wenax K1 SE Kit can delivery stable and consistent power. It not only brings you tight draw experience, but also features adaptive power tech (12-14W) to elevate the MTL flavor to new heights. It is equipped with the 1.0ohm refillable pod of 2ml capacity, which has 300~400 puffs, and is equal to 10 disposables. In addition, it is also compatible with Wenax K1 cartridge.
OXVA Unione PnM Tank is the next generation Sub Ohm Tank. The PnM means pyrex tube and magnetic connection. Made by highend pyrex glass, it will bring pure flavor and high end vaping experience. Unione PnM Tank features bottom airflow design, and you can switch coils in seconds. It is compatible with Uniplus Coil. It can hold 4ml e-juice with straight glass, and 5ml e-juice with bubble glass. Besides, you can rotate anywhere in the upper part to adjust the airflow.
Details:
Highend pyrex glass design
Magnetic connection
Bottom airflow design
Compatible with Uniplus Coil
Rotate anywhere in the upper part to adjust the airflow
Open the silicone plug to refill
Vapelustion Hannya Nano Pro S Kit
Vapelustion Hannya Nano Pro S Kit is powered by a built-in 700mAh battery with 13.6W output power and USB Type-C charging. It features 2ml e-juice capacity, 0.8Ω coil resistance, and 2 different airflow. Hannya Nano Pro S Kit also has 2 different replacement panels with metal panel design. In addition, the air switch design allows you to smoke directly by inhaling without pressing any button.
Details:
Built-in 700mAh battery, compact and powerful
The new design atomizer, 2ml e-juice capacity
0.8Ω coil resistance, 2 different airflow
Smoke gray appearance, stylish and fashionable
Two different replacement art panels
New metal panel design, easy to replace and durable
V3 MTL RTA is designed with new base and convenient filling system. It has 2 types of capacity: 2ml with short tube, 6ml with long tube. The package contains 3 MTL drip tips. Berserker V3 MTL RTA can be easily installed and fully disassembled device for beginners. In addition, you can change airflow without disassembling the device. There are three airflow pipes in the package.
Vandy Vape Berserker V3 MTL RTA is designed with new base and convenient filling system. It has 2 types of capacity: 2ml with short tube, 6ml with long tube. The package contains 3 MTL drip tips. Berserker V3 MTL RTA can be easily installed and fully disassembled device for beginners. In addition, you can change airflow without disassembling the device. There are three airflow pipes in the package.
Details:
New base design, convenient filling system
Two types of capacity: 6ml and 2ml
3 MTL drip tips
Easy installation and fully disassembled device for beginners
Charge airflow without disassembling the device
SMOK Nfix Pro Kit
SMOK Nfix Pro Pod Kit can be elegant in the palm of your hand with the simplistic body design and high-gloss finish. It is powered by a built-in 700mAh battery with 25W max and Type-C charging. And it can be fully charged within 70 minutes via 0.7A charging current. With the 0.69 OLED screen, Nfix Pro Kit can provide you with more clear and intuitive vape data. It also offers an adjustable airflow control to customize your vaping experience. In addition, Nfix Pro also features 2ml e-juice capacity, easy side filling and leak-proof technology. It can work with the SMOK Nfix Pro Pod and LP1 Coil series to bring you smooth and abundant flavor.
Details:
Simplistic body design, high-gloss finish
Built-in 700mAh battery with 25W max
0.7A charging current, 70 minutes full charge
Adjustable airflow to customize your vaping experience
0.69 inch OLED screen for more intuitive data
Draw-activated mode, inhale through the mouthpiece
Move the slider to adjust the amount of air intake
2ml e-juice capacity, easy side filling, leak-proof tech
OXVA Xlim SE Pod Kit is the extension of XLIM series. It is built with 900mAh battery with 5-25W power range, and continue to bring X-TREME flavor & strong throat hit. Xlim SE is equipped with the 0.6ohm Xlim V2 cartridge, which is highly leak-resistant and will offer great MTL vaping. Besides, Xlim SE Kit is also compatible with Xlim V1 cartridge and the others of Xlim V2 cartridges to satisfy the different needs of vaping. Smart detection design enables Xlim SE to match the recommended wattage for the cartridge. You can control the airflow to find your best draw precisely with ergonomic AFC design.
Details:
Delivery X-treme flavor & strong throat hit
Offers both RDTL and MTL vaing
900mAh internal battery
Compatible with Xlim V1 & V2 Cartridge
Highly leak-resistant
25W max output power
Auto-draw activation
Side filling system
Automatic resistance detection
Breathing LEDs to indicate the state of battery
Ergonomic AFC: airflow control on the side
Auguse ERA RDA
Auguse ERA RDA of 22mm diameter is made of SS316 material. It features 5.7mm deep juice well, adjustable airflow and 510 connection. With the 7 pcs air pins, it can support both MTL or RDL vaping (Blind/0.8mm/1.0mm/1.2mm for MTL vaping, 1.5mm/1.8mm/ 2.0mm for RDL vaping). ERA RDA also features suspended cooling fin for better heat dissipation and 180 degree juice circulate to balance moist for both cotton.
Details:
22mm diameter, adjustable airflow
SS316 material, 510 thread connection
7 pcs air pin to support MTL/RDL vaping
Design with 5.7mm deep juice well
Comes with bottom feeder/BF/squonk pin
Quad-pole deck, single/dual coil building
Suspended cooling fin for better heat dissipation
180 degree juice circulate to balance moist for both cotton
Steam Crave Hadron RDSA is designed with innovative and simple postless deck for both parallel and series builds. You can build 3.0mm to 5.0mm ID coils. It features side and bottom adjustable airflow. Hadron RDSA also supports medium to high wattage vaping. In addition, you can squonk juice to 12ml consistently and accurately with Steam Crave Pump (sold separately).
Details:
Brings medium to high wattage vaping
Supports parallel and series builds
3.0mm to 5.0mm ID coils
Innovative and simple postless deck
Side and bottom adjustable airflow
Squonk juice consistently and accurately with Steam Crave Pump
Steam Crave Hadron Mesh RDSA
Steam Crave Hadron Mesh RDSA of Φ30mm is a dual mesh rebuildable dripping or squonking atomizer from Steam Crave. It is designed with dual mesh deck and is perfect for high wattage vaping. Hadron Mesh RDSA also features top to side airflow, 510 connection and 810 drip tip. It is compatible with Steam Crave Pumper of 12ml capacity & easy side filling system. With 510 connection, it is also fit for most of mods.
Nfix Pro Kit can be elegant in the palm of your hand with the simplistic body design and high-gloss finish. It is powered by a built-in 700mAh battery with 25W max and Type-C charging. And it can be fully charged within 70 minutes via 0.7A charging current. With the 0.69 OLED screen, Nfix Pro Kit can provide you with more clear and intuitive vape data. It also offers an adjustable airflow control to customize your vaping experience. In addition, Nfix Pro also features 2ml e-juice capacity, easy side filling and leak-proof technology. It can work with the SMOK Nfix Pro Pod and LP1 Coil series to bring you smooth and abundant flavor.
SMOK Nfix Pro Kit Giveaway, 1 winner, ends on April 12th, 2022
Uwell Kalmia Pod Kit comes with 400mAh battery capacity with 13W max power. It is paired with a 1.2ohm magnetic cartridge of 1.6ml capacity. The design of elegance and tightness gives Kalmia charming appearance. It features air-activated auto draw, vibration interaction and type-c fast charging. The drip tip can fit your lip fully. Just get it to amazing vapaing experience!
Details:
Air-activated auto draw
Packed with magnetic cartridge
Fully lip-fit drip tip
Flower-shaped LED indicator
Vibration interaction
Type-c fast charging
Elegant and compact design
Patented PRO-FOCS technology
Solid magnetic connection
Aspire Flexus Blok Kit
Aspire Flexus Blok Kit is powered by a 1200mAh built-in battery to bring you satisfying all day vape. Equipped with the Aspire ASP chip, it can boost your vaping experience by offering 3-level power modes. Flexus Blok Kit also has dual activation modes for you to choose: auto draw and button triggered. With the precise airflow control, it can customize your vaping experience from MTL to RDTL. Flexus Blok features 3ml e-juice capacity, easy side filling system and top adjustable airflow. It is fit for Aspire AF (Aspire Flexus) Coil Series (AF Mesh 0.6Ω/1.0Ω Coil are included in the package).
Details:
Redefines palm sized vaping, elegant but mighty
Built-in 1200mAh battery for all day vape
Equipped with Aspire ASP Chip, 3-level wattage settings
Dual activation modes: auto draw & button triggered
3ml e-juice capacity, easy side filling, top adjustable airflow
Precise top adjustable airflow, from MTL to RDTL
Fit for Aspire AF (Aspire Flexus) Coil Series
Vaping over-time/overdischarge/overcharge/short circuit/overheat/low voltage protection
Kalmia Kit comes with 400mAh battery capacity with 13W max power. It is paired with a 1.2ohm magnetic cartridge of 1.6ml capacity. The design of elegance and tightness gives Kalmia charming appearance. It features air-activated auto draw, vibration interaction and type-c fast charging. The drip tip can fit your lip fully. Just get it to amazing vapaing experience!
Uwell Kalmia Pod System Kit Giveaway, 1 winner, ends on April 20th, 2022
Aspire Flexus Stik Kit is powered by a built-in 1200mAh battery to last 2 days vaping. It has 3 level power adjustment modes to satisfy your preference and 2 activation modes (auto draw and button activated) for your option. With the hassle-free design, it can effectively prevent false triggering in your pocket. Flexus Stik features 3ml e-juice capacity, easy bottom filling system and adjustable bottom airflow. It also has ASP Chip to guarantee the safe use of the Kit. Flexus Stik is compatible with Aspire AF Mesh 0.6Ω/1.0Ω Coil & AF 0.6Ω Coil to bring you unrivalled flavor.
Details:
Cost-effective, durable, and portable
Anodized aluminum finish, sturdy and stylish
1200mAh built-in battery, Type-C charging
3 level power adjustments
Adjustable bottom airflow
Auto draw & button activated
Old-school bottom firing to prevent false triggering
ASP chipset for safety protection
3ml capacity, bottom filling
Fit for AF Mesh 0.6Ω/1.0Ω Coil & AF 0.6Ω Coil
Vapefly Alberich MTL RTA
Vapefly Alberich MTL RTA of Φ22mm diameter is specially designed for MTL vapers. With bottom airflow design, it can bring you flavorful taste and strong throat hit. It has 6 airflow pins to optimize vapor experience: 0.8mm/1.0mm/1.3mm/1.6mm/2.0mm/2.5mm. The 4 screws design and improved cotton slot can make the coil building easier. Alberich MTL RTA also features 3ml/4ml PEI & glass tube (3ml/4ml glass tube are sold separately & 3ml/4ml PEI tube are included) and easy top filling system.
Alberich MTL RTA of Φ22mm diameter is specially designed for MTL vapers. With bottom airflow design, it can bring you flavorful taste and strong throat hit. It has 6 airflow pins to optimize vapor experience: 0.8mm/1.0mm/1.3mm/1.6mm/2.0mm/2.5mm. The 4 screws design and improved cotton slot can make the coil building easier. Alberich MTL RTA also features 3ml/4ml PEI & glass tube (3ml/4ml glass tube are sold separately & 3ml/4ml PEI tube are included) and easy top filling system.
Vapefly Alberich MTL RTA Giveaway, 2 winners, ends on April 14th, 2022
%20MTL%20RTA%20Giveaway%E8%AE%BA%E5%9D%9B.jpg)
