Vapesourcing.com - The Latest Vape Devices & E-liquid

[Vapesourcing]

Guys, here comes one newest vape box mod - Hotcig R150S Mod 150W, which is a more exquisite TC Box MOD with high-end carving and interchangeable magnetic panel, compared to Hotcig R150. Let’s have a check below.

Powered by the external dual 18650 batteries, the Hotcig R150S MOD can fire up to the max output of 150W with VV/VW/User mode. It is mainly made of high quality aircraft aluminum alloy material and attached to the more exquisite embossed panels. The Hotcig R150S TC MOD also adapts the innovative advanced waterproof HM chip, which can make your vape more stable and powerful.

Parameters
Size: 90 x 55 x 25mm
Material: Aluminum Alloy
Output wattage: 1.0-150W
Battery type: 2 x 18650 cell (not included)
Screen size: 0.96 inch
Coil Resistance Range: 0.1-3ohm
Output mode: VW/TC(Ni/Ti/TCR)/User Mode
Temperature range: 100-300°C/300-600°F
Thread: 510 Spring Loaded Connection

Get one now: https://vapesourcing.com/hotcig-r150s-mod.html.

You may also like this below:
IJOY Shogun Univ Mod Review

[Vapesourcing]

Good news! Geekvape LUCID Mod Vape Kit are in stock now, so it’s the time to order this LUCID Geekvape. What’s more, it’s just costs you $29.90, so do you want this cheap Geekvape LUCID with high performance? Just order it without hesitation.

[Vapesourcing]

Guys, another new vape pod kit - SXmini Mi Class Pod System Kit is in stock now, which can bring you the powerful performance with the YiHi SX290 chipset, and the power range is from 7 to 13W. It’s a perfect pod system kit that you cannot miss.

Order one now: https://vapesourcing.com/sxmini-mi-class-kit.html.

[Vapesourcing]

How Does HellBeast Tank Work On The iStick Pico X Mod?

Hey guys. Today let’s check out another perfect match of box mod and sub ohm tank. In fact, I was blown away at my first inhale. Well, let’s dive down for more details.

We first look at the iStick Pico X Mod Review. It is ergonomically designed with a Rubber paint finish to provide a smoother and more comfortable hand feel. Embedded in the body, there is a clear 0.69 inch OLED display screen that shows essential information such as a battery life indicator, puff counter, voltage, and wattage. Powered by a single 18650 battery, variable wattage allows this device to reach up to 75W within output voltages of 0.5-9.0V and 0.1-3.0 ohm.

The Temperature Control suite is fully equipped for Ni200, Titanium, and Stainless Steel heating elements within 0.05-1.0 ohm. Aside from Temperature Control and Variable Wattage, the iStick Pico X Mod has Bypass mode and three memory modes. For your safety and coil longevity, this mod will automatically detect the resistance of your installed coil and recommend the best output settings for that coil. Other safety features include over-charge protection, over-discharge protection, overcurrent protection, reverse polarity protection, short-circuit protection, and a ten second cut off.

Where to buy: https://vapesourcing.com/eleaf-istick-pico-x-mod.html

Pairing with the mod is the Hell Beast Tank Review. It comes with a dual purpose airflow control system that includes MTL option and compatibility with a myriad of coils. The HellBeast measures 24mm in diameter, featuring a push-to-slide top-fill system for simple e-juice refills and a standard capacity of 4mL and a max of 4.3mL. The airflow system offers two types of style, implementing a dual cyclops AFC ring for cloud-chasing effect with MTL airflow option available for a greater amount of customization.

Furthermore, the HellVape is equipped with its own 0.15ohm H1 Mesh Coils and can accommodate a myriad of coils, such as SMOK TFV8 Baby Coils, Vaporesso GT CCoils, and even Aspire Nautilus Coils (Nautilus requires an adapter).

Where to buy: https://vapesourcing.com/hellvape-hellbeast-tank.html

[Vapesourcing]

Two SMOK Kits Flash Sale-$45.21 X-PRIV & $15.56 VAPE PEN 22

Hey guys. Here come new flash sale of SMOK Kits. Just check below:

$45.21 SMOK X-PRIV Kit

Buy here: https://vapesourcing.com/smok-x-priv-kit-with-tfv12-prince-225w.html

$15.56 SMOK VAPE PEN 22 Kit

Buy here: https://vapesourcing.com/smok-vape-pen-22-kit.html

[Vapesourcing]

Guys, now you can buy the Aspire Tigon Sub Ohm Tank only if you just want this vape tank to match another vape mod. Aspire Tigon Tank supports MTL and DL vaping by using different coils and drip tips. Now let’s get more information about this sub ohm tank below.

The Aspire Tigon Tank is a newly designed sub ohm tank from Aspire with 2ml/3.5ml capacity. It comes with two type of coils: a 1.2ohm coil suitable for MTL vape and a 0.4ohm coil suitable for DL vape. The Aspire Tigon adopts adjustable bottom airflow system, and you can adjust the airflow to meet your different vaping needs. Plus the easy top filling design, the Aspire Tigon makes refilling easier and can avoid leaking effectively. The TPD edition of Aspire Tigon has child lock mechanism to provide a safe vaping experience.

Parameters
Size: 24.5 x 52mm
Material: SS304
Capacity: 3.5ml
Coil: 0.4ohm Coil(23-28W), 1.2ohm Coil(10-12W)
Fill: Top Filling
Thread: 510

Order one now: https://vapesourcing.com/aspire-tigon-tank.html.

[Vapesourcing]

What We Need Know Before Buying 700mAh SMOK MICO Kit?

Hey guys. It’s almost the end of the Chinese Lunar Year. So I think the MICO may be SMOK’s last kit of this year. And it’s sure to be a perfect full stop.

SMOK MICO Kit measure at 56.3mm by 46.5mm by 14.8mm, which is compact enough to hold in hand and put in the pocket. A classic resin design with delicate texture and soft touch is adopted on the device, the unique multicolored fluid lines look just like abstract oil paintings, possessing a stylish and elegant high-gloss finish. Equipped with an exclusive lanyard and available in 7 colors, it’s easy to be matched with your everyday wear.

Powered by a built-in 700mAh lithium battery, it’s capable of 26W maximum output and is sufficient for vaping all day along. In terms of e-juice capacity, it comes with two 1.7ml pods, one with a 0.8Ω mesh coil and the other with a 1.0Ω regular coil which offers superb MTL vaping experience. And there is also an intelligent LED indicator to displays the battery status clearly. Plus the multiple protections, the MICO will effectively guarantee safe and stable vaping.

[Parameters]
Material: Zinc alloy
Size: 56.346.514.8mm
Battery: 700mAh Built-in Battery
Input Voltage: 3.3V-4.2V
Output Voltage: 3.0V-4.0V
Output Power: 10-26W
Pod Capacity: 1.7ml
Resistance Range: 0.6ohm-2.0ohm

Where to buy: https://vapesourcing.com/smok-mico-kit.html

You may also like this: cheap smok nord

[Vapesourcing]

Guys, good news! GeekVape Flint MTL Kit are on Flash Sale and now you just can spend $24.90 on this Flint GeekVape. There are just four days left for you to order it. There are multiple safety protections bringing you a clean flavor and longer lifespan, so do you want to order one? Just catch the chance!

Order one now: https://vapesourcing.com/geekvape-flint-kit.html.

[Vapesourcing]

Two Cost-effective Pod System You May Like

Hey guys. These days I’ve been a little hooked on two latest pod vape kits. Both of them are around 15W, very perfect for my nic salts. So I decided to share them here.

Firstly let’s look at the YiHi SXmini Mi Class Kit which is a portable and luxury pod system device. Constructed of Stainless Steel material, it’s very durable to use and the exquisite paisley design will provide a comfortable hand feel. Powered by a 400mAh built-in battery and YiHi’s latest SX290 chipset, the Mi Class is capable of a wattage range of about 7 to 13W. The micro USB charging port locates at the bottom of the device alongside a reset button for any troubleshooting.

Meanwhile, there is an intuitive OLED display to showcase the battery life, output power, and puff count. As for the pod cartridge, it integrates a 1.0ohm Ceramic Coil for a smooth recreation of flavors and is capable of threaded top-fill via resin MTL drip tip for the 1.8ml capacity reservoir. In my opinion, the Mi Class is really a marvelous masterpiece!

Where to buy: https://vapesourcing.com/sxmini-mi-class-kit.html

Then is the Eleaf Elven Pod System Kit. Formed from zinc-alloy, it is enveloped in a soft metallic satin finish, making for a strong and sturdy chassis that is moderately impact resistant while maintaining a visually striking design. Incorporated within the zinc alloy chassis is a 360mAh rechargeable battery, lending plenty of power to vaporize nicotine salt e-liquid within the 1.6ml pod with the integrated 1.6ohm coil.

In addition, the Elven upkeeps the sleek design with a button-free layout, unhampered by screens or buttons, instead relying on an advanced draw activated firing mechanism. And the detachable pods are refillable, accessible via side refill port that is stoppered by a leak-proof silicone plug. Dependent on how they are inserted, the Elven offers differing airflow restrictions for each side of the pod. Perfect for those on-the-go and looking for a discreet but practical pod system, the Elven is a potential candidate.

Where to buy: https://vapesourcing.com/eleaf-elven-kit.html

[Vapesourcing]

Today here comes a newest pod vape kit - SHUOPAI Revo Pod Kit, which is an extremely compact and portable pod device with ergonomic design. Now let’s take a close look at this SHUOPAI Revo Kit below.

SHUOPAI Revo comes with built-in 400mAh battery, which can bring you 120 puffs if fully charged. With the LED indicator light, it will be very convenient to know the battery status. And the SHUOPAI Revo Kit has a 0.7ml refillable SHUOPAI Revo pod cartridge with easy top filling design. Equipped with the 1.8ohm ceramic coil perfectly for CBD oil vaping, the SHUOPAI Revo can definitely provide purer and healthier vaping flavor.

Parameters
Size: 56.346.514.8mm
Material: Zinc alloy
Battery Capacity: 700mAh Built-in battery
Output Power: 10-26W
E-liquid Capacity: 1.7ml
Input Voltage: 3.3V-4.2V
Output Voltage: 3.0V-4.0V
Resistance Range: 0.6ohm-2.0ohm

Order one now: https://vapesourcing.com/shuopai-revo-kit.html.

This pod system kit you may like below:
Cheap Justfog Minifit

[Vapesourcing]

Guys, does the Yosta Livepor 100W Mod appeal to you? Now the Livepor Yosta 100W in 7-color are in stock. This vape mod is with unique shape and high performance, so do you want one?

[Vapesourcing]

Two 200W Squonk Worth A Shot-Smoant Battlestar & Luxotic DF

Hey guys. These days I found two regulated squonk kits on the market. Both of them are designed with the same power of 200W. But the performance was very different. Now let’s take a close look.

Firstly is the Smoant Battlestar Squonk Kit which is a new version of Battlestar Range. Powered by dual 18650 batteries, it can fire up to 200W. One great feature of it is the “Squonk Button”. Basically, the button pumps the liquid from the 7ml squonk bottle to the BF 510 pin in the RDA. This apparently helps prevent over squonking too.Below the button is a 0.96in OLED screen which clearly shows the vaping data. And you have Variable Wattage, Variable Voltage, DVW (Custom Wattage Curve), TCR and Temperature control user modes to choose from.

The full kit also includes the Battlestar Squonk RDA with a dual coil build deck and side adjustable airflow. The RDA already has the hollow bottom feed 510 squonk pin installed but the kit does include a solid 510 pin if you want to use this as a dripper.

Then is the Wismec LUXOTIC DF Kit. It continues the body shape and design similar to the RX GEN3, incorporating an oversized firing button over the 1.3" OLED Display Screen for an intuitive layout that is easy to access and use. Meanwhile, it hosts an internal 7.0mL silicone squonk bottle where the third battery used to go for older layouts, perfect for those that enjoy the ability to juice the dripper on-the-go without needing any auxiliary equipment.

The Guilllotine V2 RDA is a great rebuildable squonk dripper, measuring at 24mm and including a build-friendly quad terminal deck, bottom and side dual airflow control, and an optional gold-plated squonker pin for those that want to access the full potential of the Luxotic DF.

[Vapesourcing]

Guys, today I will still recommend you two pod system kits - Aspire Spryte AIO Kit & Vaporesso Renova Zero Kit, both of which have the built-in battery of 650mAh. Now let’s make a short comparison between the two pod vape kits.

The Aspire Spryte AIO Starter Kit is an all-new pod system kit with slim and stylish design. Powered by a built-in battery of 650mAh, it can fire up to 12W max output. The Spryte has an easy to fill 3.5 or 2ml pod, and it fits comfortably in the hand in use and is very discreet. You can also rotate the ring of the cartridge to adjust the airflow to suit your vaping preference. Moreover, there comes well known and trusted Aspire BVC coil including regular BVC coil for vape juice and BVC coil for Nicotine Salt, and both are easy to install.

Parameters
Size: 108mm *26mm *26mm
Pod Capacity:3.5/2.0ml
Battery Capacity: Built-In 650mah Battery
Output Wattage: 1-12W

Purchase one now: https://vapesourcing.com/aspire-spryte-aio-pod-system-kit-650mah.html.

So how does the Vaporesso Renova Zero Kit perform? Vaporesso Renova Zero Pod System Starter Kit comes with a new innovative filling system-Press to Fill, which prevent any leakage. Features a built-in 650mah battery is built in and 1.6ml juice capacity, it also comes with a quick charging system.

The Vaporesso Zero Pod utilizes the unique CCELL coil built-in that gives you better taste and optimizes high nicotine satisfaction than general cotton coil. Zero pod kit adopts the most advanced regulated chip integrates the auto temperature control to ensure excellent performance and product safety in a smart way for the best flavorful delivery and avoiding dry hit.

Parameters
Size: 31 Mm13.5mm80.2mm
Battery/Pod Capacity: 650mah/2ml
Power Range: 9-12.5w
Coil/Resistance: CCELL 1.0ohm
Material: Znic Alloy body+PCTG Pod

Order one now: https://vapesourcing.com/vaporesso-renova-zero-pod-system-kit-650mah.html.

[Vapesourcing]

Two Ideal Kits For Both MTL & DTL-Aspire Tigon & Nord AIO 22

Hey guys. Are you looking for some cost-effective pen style vape kits? The following two devices won’t let you down. Both of them come with two types of coils to fit for MTL and DTL vaping at the same time. Well, here we go!

We first check out the Aspire Tigon Review. It is an easy to use stick style device which houses an integrated 2600mAh rechargeable battery within the zinc-alloy chassis construction, remaining moderately resistant to drops and falls. With no extraneous buttons, the Tigon has a singular intuitive firing button that can fire for 10s before safety measures interrupt the excessive firing.

As for the Tigon Tank, it is built with many different features including a child-safe sliding top fill system that must be pulled upwards before sliding to fill. This tank is innovative due to the spring-loaded inner sleeve that drops down to seal the wicking ports during coil changes that are accessed via a threaded bottom chamber. Furthermore, it features a multi-optioned bottom airflow control ring, combining restrictive DTL and MTL vaping styles.

Where to buy: https://vapesourcing.com/aspire-tigon-kit.html

Here we come to the Smok Nord AIO 22 Kit which is an all-in-one pen-style kit equipped with top rotary cap and built-in glass tank. There is a press button on the top cap to avoid accidental leakage and plays a role of child lock as well. The tank puts the steel shell and glass tube into one, which is designed for easy installation and use. Powered by a built-in 2000mAh battery, the Nord AIO 22 is capable of 30W maximum output to ensure a carefree vaping life.

In the package, you have two coils included: 0.6Ω mesh coil and 1.4Ω regular coil. The 0.6Ω coil is specially designed for DTL vaping, it has a large mesh inside, with which you can get faster heating process and massive vapor clouds; and the 1.4Ω regular coil is designed for MTL vaping, you can enjoy throat hit with it. There is also an intelligent LED indicator can tell you various status. Press the power button twice within 1 second to show battery status. Overall, it’s worth a shot.

Where to buy: https://vapesourcing.com/smok-nord-aio-22-kit.html

[Vapesourcing]

Guys, today I choose some disposable pod kit for you - VGOD STIG Disposable Pod, Digiflavor Liip Disposable Pod, Maskking High Kit, and they are sold at the low price, so which one do you like best?

VGOD STIG Disposable Pod is a disposable pod system that features mouth-to-lung style vaping, 1.2ml prefilled pods with 60mg salt nic e-liquid and a pre-charged battery. The STIG comes with a fully charged battery that is guaranteed not to lose charge until e-liquid is fully enjoyed.

Parameters
Dimension: to be updated
Liquid Capacity: 1.2ml
Nicotine by volume: 6%
Quantity: 3pcs/pack

The Digiflavor Liip Disposable Pod Device comes with 4 flavors of Reddy, Tobacco, Berry, Orange for your selection. With 240mAh built-in battery, it will bring you fantastic vaping experience. The disposable pod is also lightweight to carry. The juice is made from natural material to guarantee a safe vape.

Parameters
Size: 73.3 x 20 x 12.9mm
Battery: Built-in 240mAh battery
Nicotine Volume: 48% for Tobacco, 36% for Berry and Orange, Non-nic for Reddy
Quantity: 3pcs/pack(Tobacco, Berry, Orange)

Maskking High Kit is a mini Disposable Pod System device with stylish colors. Equipped with 380mAh battery, it will offer you great vaping experience and support 600 puffs. The separate packing is convenient for customer to fill in e-juice by themselves. The bottom LED light displays electricity clearly. Without working button, it’s easy to operate.

Parameters
Size: 105mm15.7mm10mm
Material: PC + Stainless steel
Battery capacity: Built-in 380mah Battery(600puffs)
Resistance: 3.0 ohm
Surface finish: UV printing sticker

[Vapesourcing]

How To DIY A Powerful Starter Kit With Less Than 60$?

Hey guys. Today let’s first check out another perfect match of box mod and vape RTA. The best thing is the match only cost $53.8, even less than $60. Well, here we go!

We first look at the Hugo Vapor Rader ECO Mod, a new member of Hugo Vapor Rader range. Constructed of ABS and PC material, it comes with a light-weight body (71g only) and compact size. Powered by replaceable dual 18650 batteries, it’s capable of 200W maximum output with VV/VW/Bypass/Curve Heating mode. Meanwhile, a powerful chipset is integrated to make the firing speed really fast and direct and there is a 0.96" OLED screen to clearly show the vaping data. It also supports 5V/2A fast charging function and pre-heat function to offer a better vaping experience. All in all, the Rader ECO is really worth a shot.

Where to buy: https://vapesourcing.com/hugo-vapor-rader-eco-mod.html

Then is the Augvape Intake 24mm which is a 24mm atomizer with a quarter turn threaded top cap with top fill capability. It is also capable of holding 4.2ml of E-Liquid with the bubble glass tank section, and 2.5ml for the standard tank capacity. The build deck is a two post build deck that must be removed from the base of the RTA. There are two terminals in total, with each measuring at 3mm, corner wicking cutouts, and PEEK insulation.

Airflow enters the Intake via dual adjustable top airslots, measuring at 10mm by 3mm each and can be fully closed. An 8mm wide bore delrin drip tip allows the user to intake ample vapor, however, a 510 drip tip adapter is included for more versatility. Overall, the Intake is perfect for those looking for a regular or shorty sized RTA.

Where to buy: https://vapesourcing.com/augvape-intake-rta-4-2ml-rebuildable-tank-atomizer.html

[Vapesourcing]

Guys, Chinese Spring Festival is coming, so we will have a long vacation from Feb. 1, 2019 to Feb. 11, 2019 and will be back to work on Feb.12, 2019. During the holidays, only Vapesourcing US Warehouse is still shipping, but welcome to place your orders as usual. Don’t forget to use the coupon code: Spring for 12% price off.

Want to get more Vapesourcing online vape sales, please click here: https://vapesourcing.com/spring-festival-sale.html.

[Vapesourcing]

Is Vaporesso POLAR Better Than ESPION Tour In Vapor Production?

Hey guys. Are you looking for some decent and powerful vape mod kits? You may have interest in the following two devices I’m gonna share. One is from the Vaporesso Co. and the other is from the Joyetech Co. Ok, let’s check for more details.

Firstly is the Vaporesso POLAR Review. Powered by dual high-rate 18650 Batteries, it can fire from 5-220W with the resistance range of 0.03-5ohm. Combining temperature control abilities and various functions, Polar’s Omni Board 4.0 chip allows for Super Player Mode, a broad resistance range that is meant for most of the industry’s tanks. In addition, an “Insta-fire” mode cuts the activation speed to 0.001s, meaning rapid flavor and taste, from the first breath to the last.

Important data is displayed on the 2.0" TFT color screen, relaying info such as temperature or wattage, battery life, and voltage. Optimized with a 2.5A max charge capability, the Polar is sure to spend more time in use than charging. Pairing with the mod is the Cascade Baby SE Tank, it features 6mL maximum juice capacity, triple slotted airflow control, and the utilization of the GT Coil System, bringing you an unforgettable vaping experience.

Where to buy: https://vapesourcing.com/vaporesso-polar-with-cascade-baby-se-kit-220w.html

Here we come to the Joyetech ESPION Tour Kit Review. You’ll find it looks very like the suitcase, that’s where the idea comes from, just remember to bring it with you when on the tour. Powered by dual 18650 cells, it’s capable of 220W maximum output and 2A quick charge. With the top-fill and top-airflow system, you’re free of any leakage. And you can easily manage the kit as an intuitive 0.96" display is mounted on the front of the mod.

As for the CUBIS Max tank, it features the NCFilmTM heater which makes it a coil-less atomizer. The NCFilmTM heater can be easily cleaned thus supports a long lifespan. And you can replace the cotton when it pasts its best.

Where to buy: https://vapesourcing.com/joyetech-espion-tour-kit.html

[Vapesourcing]

Guys, now Widowmaker Vandy Vape are on Flash Sale, so it’s the best time to order it now. There are six different modes in usage and it supports single or dual coil build. Want this one? First order, first get.

Order one now: https://vapesourcing.com/vandy-vape-widowmaker-rda.html.

[Vapesourcing]

Good news! Today I will introduce you three vape kits are on Flash Sale in Vapesourcing online vape store - Vandy Vape Bonza Kit, and VOOPOO Rota Kit, which are on hot sale now. The pen vape kit, mech vape kit or pod vape kit, so which one do you need?

1. Vandy Vape Bonza Kit - Promotion Price: $50.90

Click here: https://vapesourcing.com/vandy-vape-bonza-kit.html.

2. SMOK Stick V9 Max Kit - Promotion Price: $30.90

Enter here: https://vapesourcing.com/smok-stick-v9-max-kit.html

3. VOOPOO Rota Kit - Promotion Price: $19.90

Order here: https://vapesourcing.com/voopoo-rota-kit.html.