Vapesourcing.com - The Latest Vape Devices & E-liquid

[Vapesourcing]

A Vape Or A Survival Tool? Innokin MVP5 Kit 120W Preview

Guys, good day! Have you ever imagined a vape device that doubles as a Flashlight, a Power-bank, or a Sensor Tool? In the following, we’ll be covering such a vape mod kit named Innokin MVP5 Kit. Just buy from the vapesourcing online shop if you like it.

Innokin MVP5 Kit is not only a vape device but also a valuable survival tool for the outdoors and emergencies. Powered by a built-in 5200mAh, it can fire from 6-120W and features 3 Wattage Modes, temperature control, TCR, 4 memory slot programmable curve and optimized ‘Easy Select’ wattage pre-sets for Ajax or Z-coil Tanks. For amazing DTL vaping, just attach the Ajax tank, and then the MVP5 will automatically set the wattage and range to prevent accidental coil damage. While for MTL Vaping, simply attach a Z-coil Tank (Zenith or Zlide not included) and select Z-coil. The optimal range for all Z-coils will be set automatically. The MVP5 in MTL has the power that lasts all week.

The MVP5 Flashlight is an essential tool for survival in the outdoors or emergencies. Push the Flashlight button to instantly activate the ‘far-beam’ LED Flashlight. Featuring 6 modes, the Flashlight can be operated with one hand and remembers the last mode used. In an emergency, you need to know how much ‘light-time’ you have left. The MVP5 flashlight operation screen displays how much ‘light time’ remains on the current mode. The Power-bank function is a life-safer! Plug the Micro USB cable into the base to charge your phone and the operating screen shows Amp out, total mAh charged and the amount of charge time remaining. When you need to know more about where you are, the MVP5 has and a Sensor suite with a Compass, Thermometer, Barometer, and Altimeter.

For more information: https://vapesourcing.com/innokin-mvp5-kit.html

Parameters
Size: 141mm(H) * 53mm(W) * 27mm(D)
Battery capacity: Built-in 5200mAh
Wattage Range: 6W-120W
Three Wattage Modes: Normal, Boost, and Soft
Tank Resistance: 0.16ohm(50-80W) / 0.35ohm(30-55W)
Tank capacity: 2ml / 5ml(Ajax tank)
Max Output current: 35A
Resistance range: 0.1ohm-3.5ohm
Thread Type: 510
Fill method: Sliding Top Fill
Charging Current: 5V 2A

You may also like: smok rpm40 pod mod kit cena

[Vapesourcing]

Myvapors Roak Box Pod Kit Preview | Innovative Hidden Pod Design

Hey guys. Still worrying about what vape devices to carry when going out? The Myvapors Roak Kit will solve your problem perfectly.

Myvapors Roak Kit is mainly constructed from aircraft-grade aluminium material, and the special hidden pod design makes it truly pocket-friendly. Powered by a built-in 1000mAh battery, it can fire up to 8W and allows for a long vaping time as the output power is not very high. To charge the device, just slide the cover on the top to the right, and a Type-C USB port will reveal. Moreover, there’s a LED indicator light at the top left, with it you can easily monitor the condition of your device.

As for the pod, it can hold up to 1ml of e-juice which can be refilled via a side filling port. And it is definitely a highlight of the whole device as you can conceal it in or push it out of the mod by simply sliding the key on the side of the device. This design not only makes the pod cleaner but also makes the whole device more portable. The coil inside the pod has a resistance of 1.0 ohm, very suitable for nicotine salt or high nicotine e-liquids. Plus a hanging chain that can be carried around, the Roak is no doubt a must-have for vaping on the go!

Where to buy: https://vapesourcing.com/myvapors-roak-kit.html

Parameters
Size: 66.6 * 46.6 * 14.7 mm
Battery: Built-in 1000mAh
Output Power: 8W
E-juice Capacity: 1.0ml
Coil resistance: 1.0ohm
Charging: Type-C Port

You may also like: find s trio near me

[Vapesourcing]

Comparison of SMOK Fetch Mini and SMOK MAG P3

SMOK Fetch Mini and SMOK MAG P3 are two breakthrough kits that have been popular worldwide since their launch. They each have their own advantages, which one do you prefer? Now I will put them together for a comparison.

Fetch Mini pioneered the introduction of 2.5D arc-edge and PVD surface treatment technology in the industry to achieve integrated body screwless design, which represents the industry’s top industrial design and manufacturing capabilities. It has breath-holding beauty in hand, the crystal jade shell makes its body glittering and bright on both sides, causing the audience to exclaim when it appeared at the conference.

The Fetch Mini features a 1200mAh internal battery capacity and supports variable wattage up to 40W. The cartridges holds about 3.7ml of e-liquid and has a bottom refill system similar to other Smok pod kits. The Fetch Mini Kit utilizes SMOK’s new RPM coil series, which is an enlarged version of the SMOK Nord coil series that focuses on the use of Mesh heating elements to offer fantastic flavor and optimization for either mouth-to-lung or direct-to-lung vaping. The chamber of Fetch Mini is dustproof and waterproof, makes it to be safely and easily used in a dusty or rainy environment while easier to clean.

As we all know, SMOK’s classic vape product MAG is an industry legend. MAG P3 comes with the gene of MAG, and upgrads to a brand-new three-proof product on the basis of MAG. MAG P3 forgoes the use of the magazine-style battery compartment in favor of a new hinged door to accommodate the new waterproof design. It continues the classic MAG series, adding more stunning features, such as waterproof, dustproof and shockproof.

Driven by external dual 18650 batteries and a smart IQ-M chipset, MAG P3 can fire up to the max output of 230W with 0.001s flash firing speed. It owns a super responsive 1.9 inch HD touch screen to offer useful data information for easier operation. In addition, it comes with an input keyboard that provides password protection to unlock the device and a full temperature control suite.

This two breakthrough products are as bright as Hollywood Star Avenue. Fetch Mini is marked as one of the sleekest designs SMOK has released, while MAG P3 caters to all your needs. So which one do you prefer? For what reason? Appearance, power or performance?

You may also like:
lost vape orion plus

[Vapesourcing]

Aegis Squonker Mod Or Topside Dual Carbon Mod? Which Is Better?

Guys, good day! Are you looking for decent squonk devices? In the following, we’ll be covering two reliable squonk mods. You can just make a comparison between them to see which one you like better.

We first look at the GeekVape Aegis 100W Squonker Mod that maintains many of the protective features that are signature to the AEGIS lineage. Reporting an IP67 rating, it is shockproof against falls and drops that would otherwise irreversibly damage other mods, while providing a strong sealed exterior to protect against water damage.

Furthermore, this mod calls on the advanced AS-100 Chipset, accurately identifying any attached atomizers, rapid and responsive firing times, and allowing the use of atomizers with a resistance as low as 0.05ohm. At the back of the mod, an interchangeable squonk section can be swapped to change the squonk backing into a non-squonk piece, preventing potentially leaky juice to be stored in the back.

Then is the DOVPO Topside Dual Carbon Mod which features a surprisingly compact and ergonomic design. Housed in the aluminum alloy and carbon fiber body is a signature 10ml squonk bottle and two 18650 batteries (sold separately). The 10ml silicone bottle can be removed for easy cleaning, and cross-compatible with the entire Topside line up. Users can fill the bottle by simply unscrewing the spring-loaded, dual plug top cap; revealing two large fill ports.

Moreover, this mod adopts an intuitive YiHi chipset featuring a wattage range of 5-200W, a full temperature control suite, a 5 line 0.96" TFT color display, integrated protections, a 2A micro USB charging and data port, and four-button control interface. With an atomizer resistance range of 0.08-3.5 ohm, the mod is ideal for both cloud chasing and flavor chasing. Unlike the original Topside, this one is fully capable of temperature control that can support the use of nickel, titanium, or stainless steel wire; and has a TCR mode for advanced users.

You may also like: vinci voopoo cena

[Vapesourcing]

Eleaf iJust S Kit for $19.99 & SMOK G-PRIV 2 Kit for $67.99

Are you looking for cheap vape kits? Here’s your chance to score some good vape deals! The two products covered - Eleaf iJust S and SMOK G-PRIV 2 are highly acclaimed. These items are discounted for a limited time, so if you just want to buy them recently, don’t wait too long, stock up on your favorites and take advantage of the special prices while you can.

1. Eleaf iJust S Kit - Discounted Price: $19.99

Features:
● 3000mAh higher long-lasting battery.
● Top e-juice filling for convenient refilling.
● Single button for easy operation.
● New ECL 0.18ohm head with larger e-juice inlet holes.
● Detachable structure for convenient cleaning.
● Direct output voltage, the higher the battery level is, the higher the output voltage is.
● Softwear and hardwear dual circuit protections.

Where to buy: https://vapesourcing.com/eleaf-ijust-s-starter-kit.html

2. SMOK G-PRIV 2 Kit - Discounted Price: $67.99

Features:
● 2.0 inch touch screen with upgraded UI.
● Easy-to-read main menu and sub-menu, easily manage the vaping data.
● Powered by dual 18650 battery, with dual battery life indicator.
● Independent screen locking button simplifies the operation.
● Multiple protections: intelligent atomizer recognition, puff monitoring system, 10 seconds cut-off, short circuit protection, over-heating protection, low-battery warning.
● Compatible with X-Baby coil family.
● Delrin drip tip brings increased airflow.
● Adjustable top airflow system.

Where to buy: https://vapesourcing.com/smok-g-priv-2-with-tfv8-x-baby-kit-230w.html

[Vapesourcing]

New Release | 200W Uwell EVDILO Kit

Hey guys. Are you a fan of Uwell Co.? If so, you may like the Uwell Evdilo Kit we’ll be covering in the following as it is the latest vape mod kit by Uwell to date. Ok, let’s check for more details.

Uwell Evdilo Kit comprises of the Evdilo Mod and the Valyrian II Tank. Powered by two 21700 batteries (compatible with 20700 or 18650 batteries) and integrated with the new BEIN chip, the mod can fire from 5-200W at an ultra-rapid firing speed of 0.008S. The available modes are variable wattage and temperature control with nickel, titanium or stainless steel. On the control face, there is a fire button, an OLED screen, two adjustment buttons, and a Micro USB port from top to bottom. With them, you can operate and monitor the device effortlessly.

As for the Valyrian II Tank, it can store up to 6mL of e-liquid with an easy flip-to-open top filling structure. Thanks to the licensed Self-cleaning technology, Valyrian II can absorb the e-juice in the condensation holder through regular usage and vaporize it, which reduces juice leakage and lessens the cleaning frequency. Aside from the self-cleaning technology, this tank also features the advanced Pro-FOCS Flavor Testing Technology, providing vapers with the ultimate vaping experience by properly controlling the heating temperature, strictly managing the material quality, and completely restoring the e-juice flavor. Anyway, the Evdilo is definitely a must-have for cloud chasers.

Where to buy: https://vapesourcing.com/uwell-evdilo-kit.html

Parameters
Mod Size: 47.4 * 32.5 * 83.7mm
Power Range: 5W-200W
Standby Current: ＜100μA
Voltage Range: 0.7V-8.0V
Mod Material: Zinc Alloy, PC & Stainless Steel
Resistance Range: 0.1-3ohm (VW), 0.1-1ohm (TC)
Temperature Range: 200-600℉/100-315℃

Tank Size: 29 * 60.6mm
E-juice Capacity: 6ml
Thread: 510 thread
Tank Material: Stainless Steel & Pyrex Glass
Coil Type: FeCrAI Quadruple Coil 0.15ohm; FeCrAI UN2 Single Meshed Coil 0.32ohm; FeCrAI UN2-2 Dual Meshed Coil 0.14ohm; FeCrAI UN2-3 Triple Meshed Coil 0.16ohm

You may also like: aegis mod near me

[Vapesourcing]

Hugo Vapor Planet Pod Kit Preview

Designed with an excellent pattern, the Hugo Vapor Planet comes with various colors and pocket-friendly size. It is made of 6063 aluminum, making it durable to use. Powered by single 18650 battery, which can be charged via the Type-C charging port, it can reach a max output of 45 wattage. The Hugo Vapor Planet comes with 0.4ohm mesh coil, 1.4ohm dual regular DC coil, and DIY RBA coil for DTL and MTL vaping to satisfy all your vaping needs and bring you an outstanding vaping experience. Plus the 3ml pod cartridge with easy refilling design and 510 drip tip, the Hugo Vapor Planet is definitely a wonderful pod vape device.

Parameters:
Size: 97 × 46.5 × 24.5mm
Battery: Single 18650 battery (not included)
Juice Capacity: 3ml
Pod Material: Food grade PCTG
Coil Resistance: 0.4ohm mesh coil, 1.4ohm dual regular DC coil, DIY RBA coil
Output Wattage: 45W
Drip Tip: 510

More information you can see https://vapesourcing.com/hugo-vapor-planet-kit.html

You may also like:
fetch smok cost

[Vapesourcing]

Chinese National Day Sale | Code “70TH” For 12% OFF

Hey guys. Chinese National Day is coming. To celebrated the grand festival, vapesourcing online store has launched the Vape National Day Promotion. Now is the best time to get what you want at the lowest prices. Promotion period: 9/30-10/08.

Entrance: https://vapesourcing.com/national-day-vaping-sale.html

Main details:

1. Discount code “70TH” for 12% OFF(Not valid with other promotions)
2. Promotion of hot items, up to 63% OFF
3. Promotion of vape kits and e-juices, up to 73% OFF
4. Clearance sale, up to 66% OFF

[Vapesourcing]

Advken Wanderlust Lite Pod System Kit Preview

After Wanderlust, Advken create a new personalized pod – Wanderlust Lite, which sets itself apart from the typical pod vape kit due to its unusual shape. This angular shape is not only very stylish, but also ensures a good grip. Smaller and more portable, the Wanderlust Lite Pod Kit is easier to put into your pocket, or hang on your neck by a lanyard. The kit features a flat-nosed mouthpiece that is very comfortable for your lips and suitable for tight MTL suction. It relies on a draw-activated firing mechanism and can be activated with minimal suction through its cartridge tip, no need to press any button.

Wanderlust Lite integrates a built-in 1000mAh rechargeable battery, making it a considerable contender in the battery life department, eliminating the need for frequent charges. To predict unexpected conditions, Advken has equipped the Wanderlust Lite Kit with a LED power indicator light, different light color informs different battery status, so you can keep an eye on its battery.

The Advken Wanderlust Lite comes with a 2ml replaceable cartridge with 1.4ohm ceramic coil inside, which is highly compatible with regular juice, nicotine salt and CBD e-juice, allowing you to switch tastes freely. Moreover, it adopts 5 circuit protections to ensure safety during use and charging, including low voltage protection, short-circuit protection, overheating protection, overcharge protection, and 8s over-time protection.

Parameters:
Size: 80.5 × 21 × 21mm
Battery Capacity: Built-in 1000mAh
E-liquid Capacity: 2ml
Coil Resistance: 1.4ohm
Coil Material: Ceramic
Output Voltage: 3.5V
Fill: Bottom fill system
Port: Micro USB
Charging Specification: 5V/800mA

More information you can see https://vapesourcing.com/advken-wanderlust-lite-kit.html

You may also like:
smok priv n19 kit cost

[Vapesourcing]

First Look | Hippovape Papua Box Mod 100W

Hey guys. I’m back! Today let’s first check out the Hippovape Papua Mod. Mainly built with Zinc Alloy, it is well crafted to present a striking look. Ok, here we go!

Hippovape Papua Mod is collaboratively designed by Hippovape & Railyway Vapers. Inspired by Papua culture, its appearance is shrouded in primitiveness and mystery. Equipped with an advanced waterproof chipset, it can fire from 3-100W and supports three levels of output power including low, middle, and high. On the side control panel, there is an intuitive fire button, under it are four LED indicator lights.

Further below, you can see an adjusting knob and a Micro USB charging port. With all these components, you can easily operate and monitor the whole device. For safety, there are a plethora of safety features such as low voltage protection, reverse polarity protection, overheating protection, short circuit protection, 10S cut-off protection, and low/high ohm protection. Anyway, the Papua Mod is definitely worth a shot!

Where to buy: https://vapesourcing.com/hippovape-papua-mod.html

Parameters
Dimension : 91mm * 37mm * 26mm
Battery Type: 18650/20700/21700 single battery
Color: Black, Silver, Bronze
Material: Zinc Alloy
Output Power Range: 3W-100W
Output Voltage: 1.0V-8V
Resistance Range : 0.1-3.0ohm

You may also like: suorin air plus kit cena

[Vapesourcing]

Hippovape Papua Kit - Inspired by Papua Culture

Designed by Hippovape and Railyway Vapers, the Hippovape Papua is inspired by Papua culture in Indonesia, and consists of a VW mod and a RDA atomizer. The Papua mod is made of zinc alloy and powered by external 18650/20700/21700 single battery. It is equipped with the advanced waterproof chipset to achieve a power range from 3W to 100W, and produces an outstanding power output accuracy by 21700 battery (over 15c) which fires extremely fast.

The mod also adopts a feeder tube lock system and slide-to-refill system to prevent from leakage problem. It has 6 protections: low wattage protection, reverse polarity protection, overheating protection, short circuit protection, 10s cut off protection and low/high ohm protection. Included in the kit is the Papua RDA atomizer, which is optimized by the ultimate airflow that providing large vapor production. With a Pom single coil adapter attached, it is a single coil RDA to bring you better flavor.

Parameters:
Size: 91mm × 37mm × 26mm
Material: Zinc Alloy
Output Power Range: 3W-100W
Output Voltage: 1.0V-8V
Resistance Range: 0.1-3.0ohm
Battery Type: 18650/20700/21700 single battery
Atomizer Size: 24mm

More information you can see https://vapesourcing.com/hippovape-papua-kit.html

You may also want to view:
drag nano pod cost

[Vapesourcing]

What Are The Selling Points Of Advken Manta V2 MTL RTA?

Guys, good day! This time we’ll be covering the Advken Manta V2 MTL RTA. It may be a good pick if you like MTL vaping and are looking for a decent MTL atomizer. Ok, here we go!

Advken Manta V2 MTL RTA is the latest member in the Manta line up. Measuring 22mm in diameter, it can hold up to 2ml of e-juice and is refilled via the top fill cap, this is not very bad for a MTL RTA. The main selling point of this RTA is the four airflow options. You can select from side intake airflow, bottom intake airflow or a combination of both using the airflow ring on the base.

When turned there is a symbol to indicate which mode is selected: “B” presents bottom airflow, “H” presents bottom and side-half open airflow, “A” means bottom and side – fully open airflow, and “S” means side airflow. The build deck is for a single coil with two posts and a clamp screw layout. The airflow as mentioned above either comes up from below the centre mounted coil or in through the side of the deck. All in all, you can’t go wrong with the Manta V2.

Where to buy: https://vapesourcing.com/advken-manta-v2-mtl-rta.html

Parameters
Size: 22*41mm
Material: 304 stainless Steel
Thread: 510
Positive Post Pin: Brass Gold-Plated
Capacity: 2ml
Drip Tip: PEI drip tip
Colors: Black, SS

You may also like: novo smok near me

[Vapesourcing]

OVVIO Series X Disposable Pod Kit - Focuses on Every Detail

If you’re a fan of small pod system vapes, it’s time to grab the OVVIO Series X Kit, which is powered by a built-in 350mAh battery and free of any buttons or screens to extend the battery life. There is a brand logo in the middle of the fuselage, which can double as a smart LED indicator. When the cartridge and battery are connected, the brand logo LED indicator will be always on.

Included in the OVVIO Series X Kit is a 1.8ml replaceable pod with unfillable pre-filled disposable pod cartridge and has a variety of flavors. You can determine the taste according to the color of the base, the Nicotine content of each flavor is different to meet your different demand for vaping. Unplug the silicon stick on the pod first before use, then wait 5sec and enjoy it. Moreover, the OVVIO Series X Kit has multiple protection for your safe vaping.

Parameters:
Size: 115 * 20.4 * 10.1mm
Battery: Built-in 350mAh battery
Output Power: 8-10W
E-juice Capacity: 1.8ml
Charging: Type-C port
Protection: Short-circuit protection, atomizer protection, low-voltage protection

More information you can see https://vapesourcing.com/ovvio-series-x-kit.html

You may also like:
orion plus for sale

[Vapesourcing]

New Release | Steam Crave Aromamizer Lite RTA V1.5

Hey guys. Today let’s first look at the Steam Crave Aromamizer Lite RTA V1.5. You shouldn’t miss it if you are looking for a high-end RTA versatile for kinds of vaping. Ok, let’s dive in.

Steam Crave Aromamizer Lite RTA V1.5 is the updated version of Aromamizer RDTA V2 and Supreme Lite. Measuring 23mm in base diameter, it can store up to 3.5ml or 4.5ml with different glass tubes. Base on end users’ feedback and suggestions, a 4mm chimney adaptor and 2×1mm air inserts are added as accessories to make the airflow be right for MTL.

For those who are not very skillful at coil building, this RTA is not hard to use as it comes with an easy single coil build deck. At last, the special side airflow system allows air to directly hit the coil, providing you with perfect flavors. Anyway, the Aromamizer Lite RTA V1.5 is an ideal device for MTL or restricted DTL vaping! 3 colors to choose from.

Where to buy: https://vapesourcing.com/steam-crave-aromamizer-lite-rta-v1-5.html

Parameters
Diameter: 23mm
Capacity: 3.5ml (a 4.5ml extra glass tube included)
Tank Type: Single Coil RTA
Airflow peek: 2×1mm
Chimney adaptor high: 4mm
Thread: 510

You may also like: zeus sub ohm cena

[Vapesourcing]

Which Pod System Is Better? Lost Vape Orion Plus Or Nikola Antares?

In kinds of vape devices, which kind do you like best? If you’re looking for a new pod system that utilizes replacement coils and offers multiple output modes, then you’ll definitely want to check out the two devices in this article.

Firstly is the Lost Vape Orion DNA Plus Kit, it is the updated version of the Orion DNA GO. Powered by a built-in 950mAh Li-po battery, it can fire from 10-22W depending on the different coils used. For better performance, the chipboard inside has been upgraded. As a result, Orion Plus now has 5 alternate power settings and patent-pending temperature control technology. Additionally, there’s a new 40W boost system that permits for a brief increase of power upon initial firing for faster vapor production.

As for the pod, it can hold up to 2mL and features an easy top filling port. At the bottom of the mouthpiece is an airflow control ring, you may rotate it to set a MTL or DTL style vape or somewhere in between. Both the pods and coils of the DNA GO are compatible with the Orion Plus, but the previous pods and coils are recommended to be used only on the level 1 or level 2 power setting. Besides, Orion Plus has two new coil options. The first is a 0.25ohm mesh coil which would be best with standard e-liquids. Or, you may prefer the 0.5ohm regular coil which is more suitable for nicotine salt or other high nicotine e-liquids.

Then is the Nikola Antares Price. Powered by a huge 1200mAh internal battery, it can fire from 14-18W with three different voltage settings including Soft, Norm, and Hard. The LED indicator light around the fire button will let you know which mode you’re currently in. Changing the mode is done effortlessly by simply clicking the firing button 3 times.

As for the pod, it has an e-liquid capacity of 2ml and adopts a top filling design. Heating elements included in the package are two 0.6 ohm mesh coils, they can be replaced easily thanks to the “plug in and play” structure. Moreover, the airflow is adjustable to provide either a MTL or DTL vape experience, so you can freely use both nicotine salt vape juice and regular free base e-liquids. All in all, you won’t go wrong to choose the Antares Kit.

[Vapesourcing]

Moti One Pod System Kit - Enjoyment Beyond Just Flavor

Each element works together to flavor your lifestyle with state-of-the-art elegance, the Moti One uses zinc alloy materials to create a durable and wear-resistant body. Smooth and polished in an appropriate way, the streamlined design makes it sleek and modern. With the extremely simple filling mechanism, you just need to insert the nozzle and use a little pressure to open the seal to fill. Adopting innovative Meta Tech Heating Technology, each drop of e-liquid is heated evenly so every hit is delicate and sufficient. Moti One is powered by a built-in 350mAh battery and can be charged with a USB cable. It offers more control and flexibility to fill your mood and nicotine needs so that you have more freedom to choose varied flavour.

Parameters:
Dimensions: 66.8 × 28 × 14.4mm
Case Material: Metal + plastic
Power: Built-in 350mAh battery
Cartridge Capacity: 1.85ml
Evaporator Resistance: 1.0Ω
Output Power: 9-12.5W
Operating Mode: Power
Protection: Low/high resistance protection, overheating protection, short circuit protection, overcharging/overdischarge protection
Connector Type: Magnetic
Charging: Micro USB port
Charging Current: 0.3A

More information you can see https://vapesourcing.com/moti-one-kit.html

You may also like:
rpm rba

[Vapesourcing]

Laisimo Forest Wolf Pod Kit with Innovative Vibration Function

Laisimo Forest Wolf Kit is an exquisite and portable pod system that can be easy to be put in bags or pockets. Wherever you go, it can be a good companion. It has a novel vibration function, each 15 inhales, one time vibration will occur. The device is powered by a built-in 1000mAh battery, which can be charged through the Type-C port with 1A charging current, greatly reducing the charging time. On the same side, there are three LED indicators to show the battery level.

Laisimo Forest Wolf features 2ml e-liquid capacity and convenient side-fill structure. Moreover, there are three cartridges available: MTL 1.3ohm ceramic, MTL 1.2ohm regular, and DTL 0.6ohm regular. To make a perfect tank for high viscosity oil, the kit adopts top notch materials with strong corrosion resistance and high temperature resistance to ensure cozy and safe vaping, and multiple protections to avoid potential risks.

Parameters:
Size: 66mm * 40mm * 15mm
Pod Size: 35.5mm * 20.5mm * 13.5mm
Weight: 70g
Cartridge Weight: 10g
Battery Capacity: Built-in 1000mAh
E-liquid Capacity: 2ml
MTL Pod: 1.2ohm regular, 1.3ohm ceramic
DTL Pod: 0.6ohm regular
Standby Current: <18uA
Output Voltage: 3.4V
Charging Current: 1.0A
Case Material: Metal + plastic
Mouthpiece Material: PCTG
Connector Type: Magnetic
Charging Port: Type-C

More information you can see https://vapesourcing.com/laisimo-forest-wolf-kit.html

You may also interested in:
dovpo topside dual carbon mod

[Vapesourcing]

What Are The Advantages Of UD Julia Pod System Kit 1300mAh?

Hey guys. Do you like personalized vape devices? Today let’s first look at such a pod system named UD Julia Kit. Ok, here we go!

UD Julia Pod Kit is extremely comfortable to hold in hand as it has a cozy rectangular body with rounded corners. Although developers from the start do not provide many color options for side panels, it is still suitable for both “serious” and personality users. Why? Because there is a version with a transparent removable panel, under which you can place any photos you like. Powered by a built-in 1300mAh battery, the device allows for three output power levels and can last quite a long time. Different power levels can be selected by pressing the side adjustment button.

Above the button are three LED indicator lights, they will light up according to different power levels, one light means the power is low, two for medium, and three for high. As for the pod of this device, it has a capacity of 2ml and can be refilled from top, the filling port is hidden under a slider. There are two types of replaceable coils in the kit, one with a resistance of 0.8 ohms and the other with a resistance of 1 ohm. Unlike coils in other pods, they are mounted horizontally, very unique. At last, the device has an airflow adjustment switch on the other side, you can slide it to your preferences for different vaping needs.

Where to buy: https://vapesourcing.com/ud-julia-kit.html

Parameters
Dimensions: 98 * 45 * 16mm
Case material: plastic + metal
Battery: built-in 1300mAh
Cartridge capacity: 2ml
Coil resistance: 0.8/1.2ohm
Connector type: magnetic
Port: Micro-USB
Protection: against low/high resistance, from overheating, from short circuit, from overcharge/over-discharge

You may also like: aegis x kit cena

[Vapesourcing]

Difference between OVNS JC01 Pod Kit and OVNS JC01 Pro Kit

Are you familiar with OVNS JC01 Kit? Now here comes its updated version - OVNS JC01 Pro Kit, which comes with slim card-shaped appearance that is portable and comfortable to hold in hand. The kit integrates a 400mAh built-in battery, which can be charged via Micro USB port, providing longer vaping time and more massive vaper. With three LED indicators, you can check the battery level clearly: high (70-100%), middle (30-70%), low (<30%).

Compared to JC01, the JC01 Pro adds a new voltage adjustment function. There are three voltage modes: high, medium and low, meeting your different vaping needs. It features developed ceramic coils, which produce the purest flavor and better throat hit feeling. Moreover, this pod provides the security of your vaping with six protection functions, including low resistance protection, output short-circuit protection, charging protection, high resistance protection, over-time protection.

JC01 Pro has three differences with JC01. The first is the difference in function: JC01 Pro comes with adjustable voltage, while JC01 has a constant voltage system. The second is the difference in size: JC01 Pro is a little larger. The third is the difference in E-juice capacity: JC01 Pro is 1ml, larger than 0.7ml of JC01, will bring longer vaping experience.

Parameters:
Size: 42mm * 67mm * 9.5mm
Battery: Built-in 400mAh
Cartridge Capacity: 1.0ml
Coil Resistance: 1.5ohm (Cotton)
Charging: Micro USB

More information you can see https://vapesourcing.com/ovns-jc01-pro-kit.html

You may also interested in:
smok novo 2 pods for sale

[Vapesourcing]

New Sale | Buy $25.69 SMOK Fetch Mini Kit With Code "Fetch40"

Guys, good day. Have you been waiting for a cheap SMOK Fetch Mini Kit for a long time? Here comes a piece of good news. From now on, you can get the Fetch Mini at the price of $25.69 with the discount code “Fetch40”. There is no time like the present, just snap it up!

Get it here: https://vapesourcing.com/smok-fetch-mini-kit.html

Main features

1. 1200mAh internal battery and 3.7ml Pod capacity
2. The panels on both sides feature 2.5D arc edge glass
3. Laser UV transfer texturing technique
4. Waterproof & Dustproof Chamber
5. Variable wattage support up to 40W
6. Fit for SMOK RPM Series and Nord Series Coils

You may also like this: novo 2 smok cena