Vapesourcing.com - The Latest Vape Devices & E-liquid

[Vapesourcing]

First Look on Oukitel Ravo Starter Kit

Hello everyone, in your impression, Oukitel may be just a company that produces mobile phones, but now they have marched into the e-cigarette market and have released the latest vape kit - Oukitel Ravo. It is powered by a 3000mAh external 18650 battery and can be charged by Type-C interface, which is safe and efficient. The power range of Ravo is between 10 watts and 40 watts, you can switch to your desired power output by pressing the wattage adjustment button. There is a high-definition LED screen on the body to show you the essential vaping information and a non-slip design on the side to provide excellent grip feeling.

Oukitel Ravo is equipped with two replaceable coils: 0.3ohm mesh steel coil and 1.4ohm dual wire coil. It also has two modes: nic salt mode and power mode, you can use 1.4ohm coil for nic salt mode or 0.3ohm coil for free base mode. The atomizer can hold 3.5ml of e-juice and with adjustable airflow, bringing you satisfied massive vapor and pure flavor. Moreover, Ravo provides multiple protections to avoid potential risks. Press the fire button, only 0.03s needed, you can start your vape.

Parameters:
Size: 80 * 45 * 24mm
Battery Type: 18650 battery
Material: Metal + plastic
Resistance: 0.3ohm/1.4ohm
Output Power: 10-40W
E-liquid Capacity: 3.5ml
Working Voltages: 3.3-4.2V
Charging Port: Type-C
Charging Current: 1A
Connector Type: Magnetic
Protection: Low/high resistance, overheating, short circuit, overcharging/over-discharge

More information you can see https://vapesourcing.com/oukitel-ravo-kit.html

You may also like:
geekvape aegis x kit la revue

[Vapesourcing]

Venvii Baby Ness TC Box Mod with Various Battery Options, Wattage Modes And TC Modes

Venvii returns with one of their classics - the Venvii Baby Ness, which is a mini version of the Loch Ness with a similar appearance and stunning features such as preheat mode, temperature control, magnet battery door, savable presets and upgradable firmware. Ergonomically designed for a comfortable grip, it is compatible with 21700/20700/18650 batteries, bringing a large range of battery selection. And it can fire up to 120W when using 21700 battery, perfect for advanced vapers to get astonishing clouds experience.

On the side of the body, Baby Ness utilizes a crisp 0.91 inch OLED screen to indicate the essential vape information, including wattage, coil ohms, battery life, and puff counter. For simple operation, it is designed with three buttons, and supports 2A quick charging via micro USB port. It is capable of different wattage modes: boost, smooth, curve and normal, as well as multiple temperature control modes: Ni200, Titanium, Tungsten, SS304, 316, 317, TCR, to meet your different vaping needs. Moreover, multiple battery protections are added to guarantee your vaping safety.

Parameters:
Dimensions: 90 × 42 × 30mm
Battery: 1 × 21700/20700/18650 battery
Temperature Range: 200–600℉/100–300℃
Wattage Range: 5-80W (18650/20700 cell), 5-120W (21700 cell)
Supported Resistance Range: 0.05-2.0ohm (recommended resistance 0.2ohm)
Voltage Output Range: 0.5-8.5V
TC Modes: Ni200/Titanium/Tungsten/SS304/SS316/SS317/TCR/TFR
Wattage Modes: Boost (preheat)/smooth/curve/normal
Thread: 510 thread

More information you can see https://vapesourcing.com/venvii-baby-ness-mod.html

You may also like:
geekvape aegis boost la revue

[Vapesourcing]

What Are The Selling Points Of Eleaf iJust 3 Pro Kit?

Hey guys. In kinds of vape devices, pod system kits and vape pen kits are undoubtedly the two main types. This time let’s look at the Eleaf iJust 3 Pro Kit, and it is the latest iJust product to date. Just buy from the vapesourcing online store if you like it.

Eleaf iJust 3 Pro Kit carries on with partial design elements of ijust 3, but more exquisite. Powered by a built-in 3000mAh battery, the mod can fire from 30-75W and permits a long vaping time. Charging the battery occurs via a 5V Type-C USB port on the bottom, and you can connect the port with your computer for firmware upgrades. For easy operation, iJust 3 Pro adopts an intuitive fire button which is also used to power on/off the device. And, the fire button is surrounded by a three-color LED indicator light, it will change colors depending on different battery levels, so you can know clearly when a recharge is required.

As for the ELLO Duro Tank, it has a maximum capacity of 6.5ml and is refilled via an easy slide-open top-fill structure. Heating elements included in the box are a pre-installed 0.2ohm HW-T2 Coil and a spare 0.15ohm HW-M Coil, which can meet your different vaping needs. Lastly, there is an adjustable airflow system at the bottom of the tank, with which you can adjust the airflow to your preference effortlessly. All in all, the iJust 3 Pro is worth a shot whether you are a fan of iJust range or looking for a portable and reliable pen-style kit.

Where to buy: https://vapesourcing.com/eleaf-ijust-3-pro-kit.html

Parameters
iJust 3 Pro Mod
Size: Φ25mm x 97.5mm
Output Wattage: 30-75W
Input Voltage: DC 5V
Battery Capacity: 3000mAh
Resistance Range: 0.1ohm~3ohm

ELLO Duro Tank
Size: Φ28mm x 54mm
E-liquid Capacity: 6.5ml
Coil Type: HW-T2 0.2ohm Coil Head (pre-installed);
HW-M 0.15ohm Coil Head

You may also like: Uwell Caliburn $16.69

[Vapesourcing]

Rincoe Manto AIO Kit Preview | 18650 Battery For Higher Cost Performance

Hey guys. This time let’s check out a new pod mod kit called Rincoe Manto AIO. I especially like the appearance design, and there are seven options to choose from. Ok, let’s dive in for more details.

Rincoe Manto AIO Kit has a rectangle body as with many other pod mods in the market. Powered by a single 18650 battery, it can fire from 1-80W and can automatically match the power depending on coil resistances to prevent coils from being burned out. When the battery is running low, you can either take it out to charge or directly charge it up via a 5V/1A Type-C USB port on the side. The control face of Manto AIO is located on the front, from the top to bottom there is an intuitive fire button, a 0.49" OLED screen, and two adjustment buttons.

As for the pod inside the mod, it can hold up to 3ml of e-juice and is refilled via a side filling port. To meet different vaping needs, Manto AIO comes with two coil options in the box, one is a 0.3ohm mesh head and the other is a 1.2ohm regular head. Accordingly, there are two types of 510 drippers, one for DTL vaping and the other for MTL vaping. At last, it’s effortless to tailor the airflow to your preference via the AFC ring at the base of the pod. All in all, the Manto AIO is really an impeccable device for daily vaping.

Where to buy: https://vapesourcing.com/rincoe-manto-aio-kit.html

Parameters
Material: Aluminum Alloy
Dimensions: 24.3 * 45 * 80mm
Firing Time: 0.001S
Charging Voltage: 5V/1A
Capacity: 3mL
Battery: 18650 Battery (CDC>25A)

You may also like: grimm kit cena

[Vapesourcing]

Innokin Proton Mini Ajax Kit with Many Advanced Functions

Hey guys, it’s time to update your mod kit! You can consider the Innokin Proton Mini Kit, which is the mini version of Innokin Proton Kit, also the latest reiteration in the Innokin Proton series. Constructed from strong zinc-alloy, it integrates a large 3400mAh built-in battery that can be charged with 2A quick charge system, and a full range of proven safety protections. It has a large and colorful 1.45 inch TFT screen and is easy to operate via the joystick and intuitive and full-featured menu system. Moreover, you can choose from 6 great theme colors and upload your own graphics or custom message to the screensaver displayed during dim-time or on a non-stop loop. Proton Mini is equipped with the advanced chipset, which can heats the coils nearly instantaneously, and achieves the output wattage up to 120W. There are many advanced functions power users will love, including temperature control, custom TCR, custom wattage curve, Bypass mode, 3 coil memory slots to save your favorite settings and more.

The Innokin Proton Mini Ajax can be paired with a myriad of vape tanks readily available on the market, and is packaged with the Innokin Ajax sub ohm tank - a large capacity tank with bubble glass and mesh coil options to create tasty clouds of dense vapor that will please all vapers, no matter novice or advanced. The Innokin Ajax Tank with convenient top e-juice refill design and bottom airflow adjustable slots can hold 5ml e-juice, is compatible with Ajax coils and Plex3D Matrix coils. The Plex3D Matrix coils with mesh wire inside is covered with organic cotton, and has a large heating area, will heat the e-liquid fastly and evenly, deliver the incredible bursts of flavor and cloud of vapor.

Parameters:
Size: 120 × 45 × 30mm
Battery Capacity: 3400mAh/3.7V
Wattage Range: 6-120W
Max Output Voltage: 7.5V
Tank Resistant: 0.16ohm (50-80W)/0.35ohm (30-55W)
Tank Capacity: 2ml/5ml (Ajax Tank)
Cut Off Time: 3-18s
Max Output Current: 35A
Resistance Range: 0.1-3.5
Thread Type: 510
Charging Current: 2.0A

More information you can see https://vapesourcing.com/innokin-proton-mini-ajax-kit.html

You may also like:
horizontech falcon 2 la revue

[Vapesourcing]

Gas Mods Mars Pod Kit of The Cutest Size Ever

Hey guys, do you like big pods or small pods? What size is the smallest pod you have used? Today we will introduce you to the Gas Mods Mars that measures 81 × 33.5 × 17mm, which can be said to be the cutest pod system ever.

Advocating the aesthetics of minimalism, Gas Mods Mars has a simple appearance, lacks flashy decoration, and has a quite interesting form factor. It is powered by a built-in 750mah battery, and features 2ml refillable cartridge with side filling design. Adopting a special tiny chip, Mars provides four adjustable power levels and constant output voltage for smooth flavor. The control panel only contains a small fire button that is surrounded by an LED light, which indicates the remaining battery capacity and the selected output voltage mode. It comes with two kinds of replaceable cartridges: 1.5ohm SS316L and 1.8ohm NI80, which differ in resistance and material of the built-in evaporator, you can choose them to to match different ejuice.

Parameters:
Dimensions: 81 × 33.5 × 17mm
Case Material: Metal plastic
Power: Built-in 750mAh battery
Cartridge Capacity: 2.0ml
Evaporator Resistance: 1.5/1.8Ω
Output Power: 10-15W
Operating Mode: Power
Protection: Against low/high resistance, from overheating, from short circuit, from overcharge/overdischarge
Connector Type: Magnetic
Charging: Micro USB Port

More information you can see https://vapesourcing.com/gas-mods-mars-kit.html

You may also like:
aegis boost fr

[Vapesourcing]

VapeOnly Mind Pod Pro Kit Preview | Suitable For Both MTL & Restricted DTL

Hey guys. Are you an MTL lover or a DTL enthusiast? Do you like devices that are competent for both styles of vaping? Why not take a look at the VapeOnly Mind Pod Pro Kit? Maybe it will satisfy you.

VapeOnly Mind Pod Pro Kit features an ergonomic body with rounded edges and corners. Powered by a built-in 1500mAh battery, it can fire from 5-36W and supports three output modes including Simple Mode, Power Mode, and Voltage Mode. When power is low, the battery can be fully charged in 45mins via a 5V/2A Type-C USB port on the bottom of the device. On the front, there is a 0.91" OLED screen which will show the essential data clearly. The control face is located on the side of the device, from top to bottom you can see a fire button and two navigation keys.

As for the pod, it can hold up to 2.7ml of e-liquid and can be easily refilled via a top filling port. From the two viewports in the mod, you can easily know how much juice is left in the pod. Heating elements included in the box are a pre-installed 1.2ohm coil and a 0.6ohm coil, which can meet your different vaping needs. At last, there is an AFC ring at the bottom of the pod, right under the coil, so you know it’s effortless to tailor the airflow to your preference. All in all, the Mind Pod Pro is really compact and convenient for daily vaping.

Where to buy: https://vapesourcing.com/vapeonly-mind-pod-pro-kit.html

Parameters
Materials: Zin Alloy/PCTG/RGB LED
Size: 45.5 x 16.0 x 96.6 mm
Battery Capacity: 1500mAh
Power Range: 5W-36W
Voltage/Current Input: 5V/2A
Support Resistance: 0.4ohm/0.6ohm/1.2ohm
Tank Volume: 2.7ml
Voltage Output: 0.2V-3.8V
Screen Size: 0.91 Inch
USB Port: Type-C

You may also like: orion q pro cena

[Vapesourcing]

Innokin Podin Mod Pod Kit - Interchangeable Coils for Reusable Pod

Hey guys, when you want to update your pod kit, you definitely feel that it is wasteful to throw away the entire pod directly, and it would be better if you could just replace the coil. Don’t worry, today’s new product will help you solve your troubles.

As Innokin’s latest venture into the burgeoning interchangeable coil pod kit market, the Innokin Podin Kit is an intuitive device intended for users of all experiences. It boasts a distinct aesthetic, coupled with a sturdy yet lightweight construction, ideal for vaping on the go. There are two way to start vape, through the large firing button operation or inhale activation. It features a 800mAh built-in battery, which can be charged via the micro USB port, and the battery life can be displayed by the tri-color LED indicators.

Innokin Podin mod pod kit employs the proprietary 2ml pod, which can be refilled via the silicone stopper plug for a quick and mess-free process. Adjust the switch on the side of the pod, you can fine tune the airflow to your ideal draw. It also comes with 1.3ohm kanthal coils, which offer rich flavor with long lasting. The pod is reusable! With an interchangeable coil system, simply replace the coils once flavor deteriorates instead of the whole pod itself, saving on money and plastic consumption.

Parameters:
Battery: 800mAh
Pod Capacity: 2ml
Coil Resistance: 1.3ohm
Filling Method: Side filling
Charging: Micro USB

More information you can see https://vapesourcing.com/innokin-podin-kit.html

You may also like:
artery nugget aio kaufen

[Vapesourcing]

Rincoe Mechman Nano Kit Preview | Born For More DIY Fun

Hey guys. Do you like the Mechman range by Rincoe? Next, I’m gonna introduce the latest member from the Mechman lineup – Rincoe Mechman Nano Kit. Differing from the Mechman 228W and 80W, Mechman Nano adopts an RDA instead of mesh tanks, so you can just build coils as you want.

Rincoe Mechman Nano Kit continues the form factor of the Mechman 228W to large extent. Constructed from the PC and Leather, the mod is light enough to carry easily and features a good hand feeling. Powered by a single 18650 battery, it can fire up to 90W and supports a resistance range from 0.08-5.0ohm. Charging the battery occurs via a micro USB port on the side of the device. Above the USB port, there is an “X” shaped LED light which will show the battery level clearly. For safety, the mod was designed with a plethora of safety features as well.

Paired with the mod is the Metis RDA. It is 24mm in diameter and comes with a wide bore 810 drip tip. Inside the RDA, there is a simple deck with two posts, which is suitable for both single and dual coil building. And the juice well is deep enough for several decent puffs. At last, the barrel has two airflow slots on the side, simply twist the top cap will allow you to tailor the airflow to your preference. All in all, the Mechman Nano is definitely worth a shot.

Where to buy: https://vapesourcing.com/rincoe-mechman-nano-kit.html

Parameters as below
Mechman Nano Mod
Material: PC & Leather
Size(total): 115.5 x 41.4 x 30mm
Battery: single 18650 battery(not included)
Output: 1-90W
Resistance range: 0.08-5ohm
Charging: Micro-USB port
Color: Indonesia Flag, Full Black, Philippines Flag, Malaysia Flag, Camo

Metis RDA
Material: SS304 & Aluminum
Diameter: 24mm
Drip tip: 810 Pom drip tip

You may also like: p3 kit near me

[Vapesourcing]

Famovape Tiko Pod Kit - New Ceramic Coil Delivers Real Flavor

Guys, are you following the latest pod devices? Then have you heard of Famovape Tiko? It is one of them, let’s take a look.

The Tiko Kit comes with replaceable and refillable pods, featuring an anodized aluminum body to provide durable yet modern finish. There is a single LED indicator light on the chassis, so you can know when the device is functioning. With no button design, it is easy to use and can be automatically activated with a simple draw of the mouthpiece. It is powered by a 350mAh internal battery, which can be fully charged via the micro USB port within 50 minutes. What makes this Tiko Kit stand out is the most important component - new ceramic coils, which guarantee amazing flavour and an overall longer coil lasting life. The included 2ml pod is fixed reliably by magnets and easy to interchange, while the translucent plastic allows you to track the level of refilled e-liquid.

Parameters:
Dimensions: 109 × 20.4 × 12mm
Material: Anodized aluminum + plastic
Battery: Built-in 350mAh
E-liquid Capacity: 2.0ml
Resistance: 1.2ohm
Charging Port: Micro USB
Connector type: Magnetic

More information you can see https://vapesourcing.com/famovape-tiko-kit.html

You may also like:
horizontech falcon 2 kaufen

[Vapesourcing]

Horizon Adamats Kit Preview | An Ideal Choice For Beginners

Hey guys. It’s well-known to us that HorizonTech is very good at manufacturing sub ohm tanks. However, their pod vape kits are great as well. This time I’m gonna introduce a pod system by them called Horizon Adamats Kit. Here are more details about it.

Horizon Adamats looks somewhat angular though in shape it resembles a bar of soap. Powering the kit is a built-in 930mAh battery, but the exact output power is unknown. Charging is done by way of a micro USB port at the bottom of the device, and there is an LED indicator light near the bottom which will show the battery level. Above the LED light, you can see an “expensively designed” fire button, click it 5 times in two seconds allows you to power on or power off the kit.

As for the pods, they are available in two versions. Both of them can hold up to 3.5ml of e-juice but the coil heads inside are different. One version houses a 0.6ohm mesh coil while the other version works with a 1.0ohm regular coil, which can meet your different vaping needs. At last, the airflow seems to be non-adjustable on this device. Anyway, the Adamats is a new try by Horizon for pod systems, and I think it’s ok for beginners to give it a shot. 5 colors to choose from.

Where to buy: https://vapesourcing.com/horizon-adamats-kit.html

Parameters as below
Material: metal + plastic
Size: 84.5 x 38 x 17.3mm
Battery: Built-in 930mAh
Pod Capacity: 3.5ml/2ml
Coil Type: 0.6ohm Mesh Coil, wood pulp+cotton, 21.5-17.1W for regular oil;
1.0ohm Round Wire, wood pulp+cotton, 15.2-10.2W for nic salt
Connector Type: Magnetic
Charging: Micro-USB port
Protection: prevent low/high resistance, overheat, short circuit, overcharge/over-discharge

You may also like: find trio kit near me

[Vapesourcing]

[Officially Launched]-Vapesourcing Black Friday & Cyber Monday Vape Sales

Hey guys. Vapesourcing’s Black Friday Vape Deals & Cyber Monday Vape Sales have officially launched. The sales will end on 2nd. Dec. Take your time!

Entrance: https://vapesourcing.com/black-friday-cyber-monday-sale.html

Main details:

1. Coupon Code “FRIDAY” For 12% OFF

2. Gifts With Purchase
   Free Uwell Amulet Kit For The Largest Order
   Free Joyetech Christmas Themed Canvas Bags Or Vaping Bags For Top 80 Orders On Black Friday

3. Free Shipping Over $56

4. Bargains Up To 50% OFF, Limited To 10 Sets
   SMOK RPM40 Kit $12.99, Starting On 22nd. Nov.
   SMOK NOVO 2 Kit $8.99, Starting On 24th. Nov.
   Myuz SSX Disposable Kit $1.99, Starting On 26th. Nov.
   SMOK NORD Kit $9.99, Starting On 29th. Nov.
   Joyetech ATOPACK DOLPHIN Kit $9.99, Starting On 1st. Dec.

5. Best Sellers Sale

6. New Arrival Sale

7. Special Offers

8. E-Liquids Sale
   

   

You may also like: G PRIV 3 Mod Cheap

[Vapesourcing]

Teslacigs Punk Pod System Kit - The Best Choice for Punk Lovers

Hey guys, is anyone here a fan of punk style? Then I think this Teslacigs Punk Kit is a great hit to you and should be exactly what you are looking for.

Continuing the style of Nano 120W launched previously, Teslacigs Punk Kit will catch your eye with its retro punk pattern and two transparent panels, which showcase some inner gears and cogs. Made of zinc alloy, ABS and PC, it uses hollow out processing completely, only one side works truly, the rest is adornment. Powered by dual 18650 batteries, it can fire up to 220W output and be charged via the micro USB port, which can be also used for firmware upgrades. Thanks to the slide-out battery door cover, battery replacement become easy and convenient. This punk kit sports RGB LED lights that can be set to five alternate lighting modes, and a bright OLED screen on the side of the mod to display the vaping data.

The Teslacigs Punk is equipped with the new TCR (temperature coefficient of resistance) mode to customize your temperature control coils (Ni200/Ti/SS316) on your own. It even features a taste mode with norm, soft, hard, and user options to fully control the taste of your vape e-liquid when using this vape pod. As for the pod, it employs 1.2ml e-liquid capacity and convenient filling structure. Together with 1.4ohm cotton coil, you will obtain great steam and excellent flavor. In addition, the Teslacigs Punk Kit contains a lanyard, so that you can hang it around your neck and carry it anywhere.

Parameters:
Size: 39 × 12.2 × 70mm
Battery: Built-in 620mAh
Capacity: 1.2ml
Resistance: 1.4ohm

More information you can see https://vapesourcing.com/teslacigs-punk-pod-kit.html

You may also like:
nord vape kaufen

[Vapesourcing]

Dovpo Odin DNA250C Mod Preview | Everything In Control!

Hey guys. This time let’s look at the Dovpo Odin Mod. It would be a good choice if you are looking for a decent vape sale. Here are more details.

Dovpo Odin DNA250C Mod is a collaboration by Dovpo, Vaperz Cloud and YouTube vape reviewer – the Vaping Bogan. The case is CNC machined from Aluminium and the open vents in both sides allow the battery colors to show through. Powered by dual 21700 batteries, the mod has a maximum output of 200W and you can select from variable wattage mode, temperature control mode, and replay mode. However, the mod can also be powered by batteries of other sizes if you already have some battery adaptor sleeves.

On the front of the mod, there is an intuitive fire button, a 0.96" full-color TFT screen, three navigation keys, and a micro USB port from top to bottom, driving all of this is the Evolv DNA250C chipset. Plus of course, you can always connect up to the Escribe software to tailor the settings to your preference. At last, the mod can work with atomizers up to 30mm, so you won’t have to compromise your setup. Anyway, the Odin DNA250C Mod will catch many eyes as dual 21700 mods with a DNA chip would be the ideal device for lots of vapers.

Where to buy: https://vapesourcing.com/dovpo-odin-dna250c-mod.html

Parameters
Material: Aluminum Alloy
Size: 90.0mm x 51.2mm x 42.8mm
Chipset: Evolv DNA250C
Battery: 2 x 21700/20700/18650 High-drain Battery
Output Voltage Range: 0.2V - 10.0V
Working Mode: Variable Wattage, Temperature Control(Ni200, Ti, SS), Replay
Wattage Range: 1.0W - 200.0W
Display: 0.96" Full Color TFT Screen
Charging: MicroUSB 5V/2A
Threading: 510 connection

You may also like: aegis x mod cena

[Vapesourcing]

Vaptio Cosmo Plus Kit - Simplifies Operations for Convenience

Hello everyone, here comes another update of the vape device - the Vaptio Cosmo Plus Kit. Can it reproduce the same brilliance as the first generation? Let’s have a look.

With an ergonomic one-piece body, Vaptio Cosmo Plus Kit features an ultra compact profile, fitting in your pocket perfectly to be carried around. Adopting an exquisite surface treatment process and framework curve detail process, it gives a strong three-dimensional visual impact with its filamentous surface textures, smooth hand feeling, and spectacular high-gloss color collocation. Powered by a 1500mAh internal battery, it releases a max output of 35W. It comes with a 0.69 inch OLED display and optional modes of VV/VW/Bypass, offers an extremely intuitive way to satisfy your needs.

There are two types of replacement coils included in the package: 1.6ohm coil for MTL and 0.7ohm coil for DL. Cosmo Plus vape kit frees you from any confusing options. Thanks to the plug-and-pull design, coil replacement become as simple as charging. It adopts the innovative airflow adjustment, rather than adjusting the airflow ring, you can just hold the whole tank and screw the glass tube to adjust the amount of steam, which is much more convenient and efficient.

Parameters:
Mod Size: 20.3 * 27 * 70mm
Tank Size: 18.5 * 56.9mm
Mod Material: Aluminum alloy + PC
Resistance: 0.7ohm/1.6ohm
Tank Capacity: 2.0ml/4.0ml
Battery Capacity: Built-in 1500mAh
Max Output Power: 35W
Charging Current: 5V/1A
Protections: Over-vaping protection, short-circuit protection, low-voltage protection, over-charging protection

More information you can see https://vapesourcing.com/vaptio-cosmo-plus-kit.html

You may also like:
vaporesso gen 220 kaufen

[Vapesourcing]

Uwell Caliburn KOKO Kit Review | Keep On Keeping On

Hey guys. This time we’ll be covering the Uwell Caliburn KOKO Kit. From its name, we can see that it is inextricably linked to the previous Caliburn. So may also like it if you like or have used the original Caliburn.

Uwell Caliburn KOKO continues the concise style of the Caliburn. Still built with Aluminium Alloy, it is lightweight enough to carry anywhere yet very durable for long term use. Powered by a built-in 520mAh battery, Caliburn KOKO adopts a draw-activated mechanism which can fire up to 11W. Charging is done via a micro USB port on the bottom of the device, and there is a little LED indicator light on the side, it will show the battery life clearly with different colors.

As for the pod of Caliburn KOKO, it has a maximum capacity of 2ml and can be easily refilled via two top filling ports, and there is a cut on the mod for you to observe the juice level of the pod. The coil inside the pod has a resistance of 1.2 ohms and the parallel design can fully atomize the e-liquid, giving you better flavor, bigger clouds, and a smoother throat hit. Moreover, Caliburn KOKO is also compatible with the pod used on Caliburn Kit. Anyway, Caliburn KOKO is definitely a good choice for MTL vaping.

Where to buy: https://vapesourcing.com/uwell-caliburn-koko-kit.html

Parameters
Material: Aluminum Alloy, PR, PCTG
Size: 67mm43mm12mm
Battery Capacity: 520mAh
Maximum Wattage: 11 W
Juice Capacity: 2ml
Coil Resistance: 1.2 Ω

You may also like: IJOY Diamond Tank $5.20

[Vapesourcing]

Uwell Nunchaku 2 Kit with Five Big Highlights

Guys, there must be many of you who have used or heard of Uwell Nunchaku, which has been loved by all since its release and has stood the test of time. Now Uwell brings you its upgraded version - the Uwell Nunchaku 2, consisting of Nunchaku 2 Mod and Nunchaku 2 Tank.

As a pen style vape kit, Nunchaku 2 is completely made of metal with hand polishing process, making it feel smooth and delicate. It is powered by single 18650/20700/21700 battery, delivers a maximum output of 100W, along with three modes available to choose, including VW mode, TC mode, and Mesh mode. There is a small OLED display on the top of the mod, clearly shows the basic vaping data.

The 6-axis motion sensor is one of the biggest highlights of the Nunchaky 2, simply flick your wrist to switch vape modes or adjust wattage. The sensor works with the Uwell BEIN chip, eliminating the “+/-” function keys, making the Nunchaku 2 even more compact. Safety is paramount, and the Uwell Nunchaku 2 covers them all. The PCBA is dust-proof and moisture-proof, effectively protects the core unit of the pen kit and prolongs product life.

The 5ml Nunchaku 2 tank features patented self-cleaning technology that absorbs the e-juice in the condensation holder through regular usage and vaporize it, reduces juice leakage and lessens the cleaning frequency. It has an optimized cap design and threaded top refill system, you can refill e-juice with minimal effort by rotating the top cap 90°.

The tank is compatible with UN2 series mesh coils, they heat evenly and fully atomizer the juice for great taste and huge clouds. Adopting plug and pull design, coil replacement becomes easier. At the bottom of the atomizer vape is a dual slotted airflow control ring, which is used to carefully meter the amount of airflow rushing through the internal coil structure. What’s more, the exclusive Pro-FOCS flavor testing technology properly controlling the heating temperature, strictly managing the material quality, and completely restoring the e-juice flavor.

Parameters:
Uwell Nunchaku 2 Mod
Size: Φ29.9mm × 100mm
Net Weight: 141g
Battery: 1 × 21700/20700/18650 (not included)
Power: 5-100W
User modes: Power(VW) mode, TCR mode, Mech mode(Bypass)
Standby Current: <100uA
Resistance: 0.1ohm-3ohm(VW), 0.1ohm-1ohm(TC)
Temperature: 200°-600°F /100°-315°C
Screen: OLED display screen
Material: Stainless steel, pyrex glass
Charging: Micro USB port, 5V/2A

Uwell Nunchaku 2 Tank
Size: Φ29 × 48.3mm
Net Weight: 60.6g
Tank Capacity: 5ml
Coils: FeCrAl UN2 Meahed-H 0.2ohm coil(50-60W), SS316L UN2 Meshed-H 0.14ohm coil(50-60W)
Material: Stainless steel, polycarbonate
Connection: Threaded 510 connection

More information you can see https://vapesourcing.com/uwell-nunchaku-2-kit.html

You may also like:
smok vape pen kaufen

[Vapesourcing]

Vapesourcing Cyber Monday Vape Sale Keeps On!

Hey guys. Failed to get beloved devices in Black Friday vape sale? Don’t worry, Cyber Monday Vape Deals keeps on. It will only last for 24 hours end on 2nd. Dec. Don’t miss out!

Entrance: https://vapesourcing.com/black-friday-cyber-monday-sale.html

Main details:

1. Coupon Code “Monday” For sitewide 12% OFF

2. Gifts With Purchase
   Free Uwell Amulet Kit For The Largest Order

3. Free Shipping Over $56

4. Bargains Up To 50% OFF, Limited To 10 Sets
   ATOPACK DOLPHIN $9.99, Starting On 1st. Dec.

5. Best Sellers Sale

6. New Arrival Sale

7. Special Offers

8. E-Liquids Sale
   

   

You may also like: iStick Rim C Mod Cheap

[Vapesourcing]

Cybervape CyberX AIO Pod System Kit Preview

Hey guys, today we want to introduce the first device from a new company - Cybervape CyberX. In response to current bandwagon demand, the company has tried to make efforts with this device in both Pod and AIO branches.

Showcasing the design philosophy of Cyberpunk, CyberX features a futuristic appearance with sharp lines and rubberized finish, feels light in the hand. It has two sides, one with a removable triangular door, where the Artery Pal styled pod slides in and the other where the fire button, adjustment buttons, and a small screen is placed.

CyberX pod vape is powered by a built-in 800mAh battery, and can be fully charged in about one hour via the USB Type-C port when completely discharged. The battery life will be displayed through a 4-bar battery indicator on the screen, along with three optional modes: variable power, variable voltage and temperature control.

The pod has a liquid capacity of 3ml, and can be easily filled through a rubber-covered port, which is large enough to support a dripper tube without leakage. In addition, there are two coil options of 0.5ohm mesh coil and 1.2ohm coil to meet different vape needs.

Parameters:
Dimensions: 83.6mm × 39.75mm × 20.7mm
Case Material: Metal + plastic
Battery Capacity: Built-in 800mAh
Output Power: 5 - 30W
Voltage Range: 1.0 - 6.0V
Pod Capacity: 3.0ml
Resistance: 0.5ohm/1.2ohm
Operating Mode: VW, VV, TC
Temperature range: 200℉ - 600℉
Connector Type: Non-magnetic
Charging Port: Type-C
Charging: 5V/1A
Protection: Low/high resistance, overheating, short circuit, overcharging/over-discharge

More information you can see https://vapesourcing.com/cybervape-cyberx-kit.html

You may also like:
vinci pod mod kaufen

[Vapesourcing]

Advken Oasis Pod System Kit Preview

Hey guys, a cheap pod system for you here - the Advken Oasis Vape Pod. It features a simple form factor without any decoration other than a fire switch and a LED battery life indicator surrounding the fire switch. It is designed in a slender pen style, fits comfortably between your fingers. The body is made of aluminum alloy, superior in the fadeless glossiness and lightweight, making it an ideal choice for carry-on device.

Advken Oasis is powered by a 360mAh build-in battery, and can be fully charged in about 40 minutes via the Type-C port located at the bottom of the device, shortening the charing time. It uses 2ml e-juice capacity replaceable cartridge with 1.2ohm A1 coil inside, making the taste more pure. Adopting side filling system and double leak-proof structure, it will give you convenient and comfortable vaping experience. Besides, it utilizes bottom airflow control to meet your individual demands better.

Parameters:
Dimensions: 111mm × 21mm
Material: Aluminum alloy & PCTG
Battery Capacity: Built-in 360mAh
Cartridge Capacity: 2ml
Filling: Side filling
Coil Composition: A1 wire + organic cotton (1.2ohm)
Operating Mode: Power
Connector Type: Magnetic
Charging: USB Type-C port, 0.5A charging current
Protection: Low/high resistance, overheating, short-circuit, overcharge/overdischarge

More information you can see https://vapesourcing.com/advken-oasis-kit.html

You may also like:
smoktech fetch kaufen