Vapesourcing.com - The Latest Vape Devices & E-liquid

Vapesourcing · December 30, 2019, 5:09am

Myle Mini Disposable Pod - A Real Alternative to Cigarettes

Hey guys, if you are looking for an easy-to-use simple pod system, the Myle Mini Disposable Pod is for you! It is an all-in-one disposable vape at a nicotine salts content of 5% or 2% by volume, requires no maintenance, charging or refilling. Once it has been used, just throw away. Salt-based nicotine absorbs into the bloodstream at a faster rate than free-base nicotine, the faster absorption rate causes you to experience a rush more quickly with similar satisfaction to a cigarette.

Each box packages two 1.2ml disposable e-cigs that are fully charged to provide you with approximately 320 puffs per pod, equivalent to 20 cigarettes. Myle Mini is only as small as a lighter whose weight is negligible, easy to carry and use. With no buttons, it is controlled and activated when you inhale. Featuring all of the tradition Myle flavors along with some new ones, it provides a total of nine flavors, you can make diverse choices according to your favorite taste.

Parameters:
Size: 2.96 × 0.77 × 0.42 inch
Device Color: Black
E-liquid Capacity: 1.2ml built-in
Nicotine Content: 5% or 2% nicotine by volume/unit
Puffs: 320 puffs/pod (approx.)
Flavor: Iced watermelon/iced apple mango/iced mint/iced quad berry/sweet tobacco/pink lemonade/red apple/lemon mint/peach

More information you can see https://vapesourcing.com/myle-mini-disposable-pod.html

You may also like:
vinci x mod pod fr

Vapesourcing · January 11, 2020, 2:26am

Eleaf iStick Rim C Mod Preview | Elegance Is An Attitude

Hey guys. Are you in looking for a decent box mod? If so, you shouldn’t miss out on the Eleaf iStick Rim C Mod I’m gonna share. Eleaf released it recently and I like it very much. Just buy from the vapesourcing online store if you like it too.

Eleaf iStick Rim C Mod basically continues the ergonomic design elegant appearance of the iStick Rim Mod. However, the back cover of the mod is detachable this time and under it is a battery compartment. Powered by a single 18650 battery, the mod can fire from 1-80W and supports a range of working modes such as VW mode, TC mode, and Bypass mode. Charges are done by way of a 5V/2A Type-C USB port near the bottom of the mod, which results in fast charging, firmware upgrades are also finished there.

The design of the control face is nearly the same as the Rim C, a glossy panel hides an oversized fire button, a monochrome OLED screen, and two adjustment buttons, which makes the mod very easy to operate. For safety, there are a plethora of safety features including over-charge protection, over-discharge protection, over-current protection, over-time protection, short circuit protection, and reverse polarity protection. Anyway, you won’t go wrong with the iStick Rim C Mod.

Where to buy: https://vapesourcing.com/eleaf-istick-rim-c-mod.html

Parameters
iStick Rim C Mod
Size: 35mm x 29.5mm x 82mm
Output Wattage: 1-80W
Battery: 1 x 18650(Not Included)
Resistance Range: 0.05ohm-3ohm
Thread: 510
Charging type: USB Type-C

You may also like: falcon 2 tank near me

Vapesourcing · January 11, 2020, 5:19am

Voopoo Vinci Air Mod Pod Kit – Inheritor of Voopoo Vinci

Hey guys, a new version of Vinci has been released called Voopoo Vinci Air Pod Kit. Drawing on the success of its predecessor, the Vinci Air is rich in features. It utilizes an exquisite and compact design, the whole body is 20% lighter and 30% thinner than Vinci. Made of zinc alloy material, it uses the same matte metal painting process as cars with a further texture. It has two firing methods: manual mode and automatic mode, both can bring surging smoke in the first time.

Despite its compact size, the Vinci Air integrades a 900mAh battery, capable of reaching a max output of 30 watts. It has built a GENE.AI chip inside, which may be the smartest chip in electronic cigarettes, standing out by intelligent coil matching, puff mode and other functions. On the front side, it has a beautiful monochrome screen to display parameters and the number of puffs in real time.

The 4ml pod cartridge adopts magnetic connection, providing the simplest and most sanitary way of filling e-juice. It comes with two dedicated coils: PnP-VM4 0.6ohm coil for massive vapor, and PnP-R2 1.0ohm coil for excellent MTL vape. It is also compatible with several PnP coils such as PnP-VM3, PnP-R1 and PnP-RBA, which can be easily replaced via the pull-and-push design. Vinci Air mod pod retains the innovative dual airflow system with airflow inlets on both sides, try turning the cartridge 180-degree and inserting it, you will get two completely different mouthfeel experiences.

Parameters:
Size: 100.9 * 27 * 18mm
Weight: 80g
Material: Zinc Alloy + PCTG
Battery: Built-in 900mAh
Power Range: 5-30W
Output Voltage: 3.2-4.2V
Capacity: 4ml
Resistance Range: 0.1-3.0ohm
Standard Coils: PnP-VM4 0.6ohm, PnP-R2 1.0ohm
Compatible Coils: PnP-VM3, PnP-R1, PnP-RBA
Protections: Overtime, short-circuit, overcharge, output over-current, over discharge, over-temperature, max power

More information you can see https://vapesourcing.com/voopoo-vinci-air-kit.html

You may also like:
aegis boost pod mod fr

Vapesourcing · January 13, 2020, 2:35am

MOJO Or MYLE Mini? Which Disposable Pod Is More Worth Buying?

Lately, there seems to be a wave of disposable pod devices on the vape market. The two devices I’ve noticed are MOJO and MYLE Mini. Next, we’ll make a comparison between them, and you can see which one you like better.

Starting with the MYLE Mini Disposable Pods, they provide the same satisfying flavors and silky smooth draws as full-size devices, but minimized into a convenient pocket size! Thus, they’re great for on-the-go, at a concert or at the park because there’s no fussing with detachable pods – it’s just easy, quick and worry-free. Each MYLE Mini pack comes with 2 sealed pods, just 3 inches long and one inch wide. To cater to different tastes, MYLE Mini Pods are totally available in nine pleasing flavors. All flavors are outstandingly smooth, flavorful and provide satisfying throat hits, so there is always one that resonates with your personality.

Operating-wise, MYLE Mini Pods are activated by inhaling and pre-filled with 1.2ml (approximately 320 puffs) of 50mg salt-based E-Liquid. Salt-based nicotine absorbs into the bloodstream at a faster rate than free-base nicotine. The faster absorption rate causes the user to experience a rush more quickly with similar satisfaction to a cigarette. At last, these individual MYLE Mini Pods come fully charged and should be properly disposed of after its life cycle.

Moving on to the Mojo Disposable Vape, they are color-coordinated and themed to their flavors. Constructed from plastic, Mojo Pods are about the size of a traditional USB-stick drive and almost as light as a feather. Plus a flattened octagon form-factor that tapers into a bullet-like shape at the mouthpiece, you can easily carry them around or hold them between lips while hands are occupied. Powered by a built-in 260mAh battery, these pods are draw activated. Once you pull out the tiny mouthpiece plug and remove the seal tape from the bottom, you’re good to go.

When you draw on a Mojo Pod, a light on the bottom will illuminate to let you know that it’s working. Each Mojo Pod is pre-filled with 1.2ml of 5.0% nic salt (50mg) and designed to give about 250+ puffs. Once the puff life cycle is finished and the battery is dead, you’re done with the device.

Given the above, which disposable vape would you choose?

Vapesourcing · January 13, 2020, 5:07am

CoilART Blazar MTL Kit - Childproof Function & 6 Level Airflow

CoilART Blazar Vape Pen is a pocket sized device with pen style design, made of high-quality stainless steel and resin material, consists of Blazar Mod and Blazar RTA. It is powered by an external 18350 battery, deliveres adjustable voltage from 3.0V to 4.2V. There is a side mounted firing button, which permits easy operation and fast firing. With the top proprietary chipset, it offers some safety protections to keep the device stable and avoid any mishaps, such as low/high resistance, overheating, short circuit, and reverse polarity.

The RTA tank possesses 4ml large e-juice capacity with childproof and leakproof top refilling design, assures a easy refilling without any leaking. Using the single coil building deck with dual posts, you can install the pre-built coil on it easily. The battery cap at the bottom is adjustable with a twisted-style lock button, it makes the airflow adjustable in six levels, providing a pure flavor with great clouds in a mouth-to-lung manner.

Parameters:
Dimensions: 98 × 24mm
Material: Stainless steel + resin
Battery: Single 18350 battery
Voltage Range: 3.0 - 4.2V
Operating Mode: Power
Tank Capacity: 4ml
Supported Resistance: 0.15 - 3.0ohm
Protection: Low/high resistance, overheating, short circuit, reverse polarity
Connector Type: Steel 510, pin gold plated, spring loaded

More information you can see https://vapesourcing.com/coilart-blazar-kit.html

You may also like: fetch pro near me

Vapesourcing · January 16, 2020, 7:11am

Ohm Vape MP60 Mod Pod Kit Preview

Hey guys, after Ohm AIO Kit, the manufacturer Ohm Vape lanched their new product MP60 Kit to join the competition of pod system. Maybe this brand has not yet attracted your attention, you can better understand them through this new pod device.

Despite its small size, the MP60 Kit implements a 1300mAh built-in battery to meet your long-time vape need, delivering a variable power range with maximum output wattage of 60W. It integrates an innovative chipset inside, shortens the firing time to 0.001s. Better than most vape pod systems with similar shapes, it is also equipped with a screen on the front to show you the necessary paramaters.

The MP60 Kit comes with two types of pods, one is the MP standard pod with pre-installed MP mesh 0.4ohm coil for the best flavor and excellent vapor production, another is the MP pod with pre-installed 0.6ohm coil. Both pod cartridges have a capacity of 3.7ml and features side filling design, you can inject the liquid simply by pulling out the rubber plug on the side slot.

Parameters:
Size: 109.5mm * 33mm * 18mm
Weight: 76.5g
Battery: Built-in 1300mAh
Output Mode: Watt
Output Wattage: 5W-60W
Output Voltage: 0.5V-4.1V
Input Voltage: 3.2V-4.2V
Charging Current: Max 600mAh
Charging Voltage: 5V
Overcharge Voltage: 4.3V
Overdischarge Voltage: 2.4V
Standby Current: <50uA
Firing Time: 0.001s
E-liquid Capacity: 3.7ml
Resistance Range: 0.4ohm-3.0ohm

More information you can see https://vapesourcing.com/ohm-vape-mp60-kit.html

You may also like:
myle mini disposable pods fr

Vapesourcing · January 18, 2020, 2:38am

VINCI AIR Or VINCI X? Which Kit Fits You Better?

Hey guys. This time we’ll be covering the VINCI AIR and VINCI X. You can just make a comparison between them to see which one is more suitable for you. Ok, here we go.

Starting with the VOOPOO VINCI AIR. It basically continues the form factor of its predecessors but 30% thinner and 20% lighter. Moreover, it adopts the same matte metal painting process as cars and has a further texture. Powered by a built-in 900mAh battery and driven by a GENE.AI Chip, VINCI AIR can be activated either by inhaling or via a fire button and features a wide output range from 5-30W. Charging is done via a 5V/1A micro USB port on the side of the device, and there is a beautiful, inward-looking screen that displays parameters and the number of suction ports in real-time.

As for the pod, it has a maximum capacity of 4ml and is still refilled via a side filling port. With purchase, you can get two dedicated coils from the kit, 0.6Ω PnP-VM4 for massive vapor, and 1.0Ω PnP-R2 for excellent MTL experience. In addition, the pod is compatible with several other PnP coils, just pull and push and then enjoy different vaping experience, fast and affordable. Airflow-wise, VINCI AIR retains the innovative Dual Airflow System. Try turning the atomizer 180° and inserting it, you will get two completely different mouthfeel experiences. Lastly, the airway design has been specially optimized, bringing unparalleled comfort to MTL and Half-DL.

Moving on to the VOOPOO VINCI X. Powered by a single 18650 battery and driven by the new-generation GENE.AI chip, it has a wide power range from 5-70W and can automatically match the power depending on the coil resistance, to a large extent avoiding coils besing burned out. Moreover, the GENE.AI chip will record your vaping habits through a puff curve, it displays your accumulative puffs in realtime on the screen and keeps those records for two weeks. For safety, VINCI X is also armed with a myriad of safety features.

As for the pod, it has a capacity of 5.5ml and is refillable via a side filling port. Heating elements included in the box for VINCI X are a 0.3ohm PnP-VM1 mesh coil and a 0.6ohm PnP-VM4 coil, both of them can be replaced effortlessly thanks to the “PnP” design. Besides, the pod is also widely compatible with all the other PnP coils by VOOPOO. Lastly, there are two airflow options to choose from, simply rotate the pod 180° will allow you to switch between them.

So which kit would you like to grab?

Vapesourcing · January 18, 2020, 5:31am

New Release - DripMore Switch Mods Disposable Pod Device

Hey guys, have you or anyone around you used the popular Candy King, Cookie King, Milk King, and Tropic King e-juices? They are created by DripMore, one of the most recognizable e-juice brands in the vape industry. With the increasing popularity of disposable devices, the manufacturer just released the Switch Mods Disposable Device to cater to this trend. This is an all-in-one device that requires no charging or refilling, featuring a slimline profile with draw-activated firing mechanism, you can simply inhale to enjoy the delicious tastiness of mouth to lung vape.

Switch Mods integrates a 280mAh internal battery and contains pre-filled 1.3ml of e-liquid with 5% nicotine salt content, is ready to use right out of the package. Nicotine salt vape devices are excellent alternatives to traditional cigarettes as you can get a smooth throat hit with high nicotine content. Each disposable pod kit is able to provide around 300 plus puffs, equivalent to approximately one pack of cigarettes. With 15 different flavors including tasty fruits and menthol, and counting, you will always have a new flavor to tickle your fancy and never get flavor fatigue.

Parameters:
Battery Capacity: Internal 280mAh
E-liquid Capacity: Pre-filled 1.3ml
Nicotine: 50mg (5%)
Puffs: 300+ puffs per pod
Quantity: 1pc/pack
Ingredients: Vegetable Glycerin, Propylene Glycol, Nicotine, Natural & Artificial Flavors
Flavors: Blue Razz, Berry, Grape, Peach Ice, Pink Lemonade, Grapefruit Guava, Watermelon Ice, Strawberry Banana, Strawberry Lemonade, Mango, POG, Green Apple, Cucumber Lime, Melons, Mint

More information you can see https://vapesourcing.com/switch-mods-disposable-pod.html

You may also like:
myle disposable kaufen

Vapesourcing · January 19, 2020, 1:15am

2020 Spring Festival Vacation Schedule

The Chinese New Year is just around the corner. During the Spring Festival vacation, we will stop shipping packages and customer service. Once the vacation is over, we will try our best to deliver the orders soon. It may take about 3-5 working days to send out backlog orders (except pre-orders). Thank you for your understanding and attention.

Please check our vacation schedule:

Spring Festival vacation: Jan. 20 to Jan. 31, 2020
The customer service team will still handle emails, but only address and item changing and order cancellation, other emails will be responded when they back to work on Feb. 01.
The USA Warehouse will be working normally, except weekends.
Only the orders of the USA Warehouse will be shipped normally.
The orders of the Hong Kong Warehouse and the CN-SZ Warehouse (except pre-orders) paid before Jan. 19 can be shipped before the vacation. It’s recommended to place your orders ASAP. It will take 3-5 working days to ship out backlogged orders when we come back on Feb. 01. Thanks for your understanding.

Best Wishes
VapeSourcing Marketing Dept.

Vapesourcing · February 1, 2020, 1:25am

Clearance Product $11.99 : Buy Geekvape Frenzy Kit With Free Geekvape NS Coil
Hello, everyone. Today I will introduce you a clearance product which just sell $11.99, it is Geekvape Frenzy Kit, what’s more, you can get a free geekvape NS Coil in th package, Random KA1 Mesh 0.7ohm or SS316 1.2ohm, 5pcs/pack. Can you beat that?

The purchase link is https://vapesourcing.com/geekvape-frenzy-kit.html

Vapesourcing · February 13, 2020, 8:07am

The Differenec between IJOY Jupiter 3000 and IJOY Jupiter Kit

Hey, guys. A few days ago, we have introduced the IJOY Jupiter Kit for you. Today, I will intro to another one which is similar to it, it named IJOY Jupiter 3000 Kit.

Ijoy Jupiter 3000 is powered by a 3000mAh built-in battery with max 70W power output. It is compatible with regular e-juice and nic salt for your choices which will release the best flavor and big clouds. With a smaller size, simpler operation and safer use, Jupiter 3000 is widely suitable for 0.2ohm, 0.6ohm mesh coil and RBA coil. You can choose one for your daily use among the 7 colors optional. New member from iJoy – iJoy Jupiter 3000 Kit which is combined with two materials of metal and leather with elegant and modern outlook. The Jupiter 3000 is powered by a 3000mAh built-in battery with max 70W power output. It is compatible with regular e-juice and nic salt for your choices which will release the best flavor and big clouds. With a smaller size, simpler operation and safer use, Jupiter 3000 kit is widely suitable for 0.2ohm, 0.6ohm mesh coil and RBA coil. You can choose one for your daily use among the 7 colors optional.

The picture you can see the difference between them.

Purchase link: https://vapesourcing.com/ijoy-jupiter-3000-kit.html