Thanks for the link. I’m actually a registered nurse and I am for THC because of all of the healing qualities!! My parents for example have severe breathing problems and the THC has saved their lives! The past few years my Dad was in the ER so many times we lost count! Now this year he started taking hits when he gets short of breath and it immediately helps him breath easier!!! Now I’m not saying go do this but how can I ever be against something that has thousands of scientific evidence based resources that support that it has therapeutic results. I think as time goes on people will start to realize that their health is more important than anything! Do the research. Pubmed is a good place or NORML :). Thanks for the post!
7 Likes
You can already get it for your ejuice. However, you will not get that “high” feeling.
Personally I just prefer to drop a few buds in a dry herb vaporizer. Or just hash, hash is good. The effects are much better this way.
I think you are confusing THC extract for cbd oil, which contains no THC thus won’t get u high. If you have done dabs or hash, that is quite literally what I will be disolving straight into the juice basically. I promise you it gets you high. Lol.
1 Like
This came from Colorado idk exactly what it was.
The first thought I ever had when I found out about vaping was how well it will work with hash. Get you an rda and put hash in it.
Hash is not extract, it won’t vape on an rda, too much plant material still in it, it’ll just burn. Can do that with dabs tho, I have done that plenty…
1 Like
Idk, your slang must be different than mine. Any hash I have seen drops right on.
I bet you could put keif in the juice…maybe.
You are not understanding the difference between extract and concentrate.
Extract pulls the oils out of the plant material so that it can be vaped without any plant left to burn with it. Hash is just compressed kief. Not separated from the plant material yet.
Kief in juice would not work for multiple reasons. 1) the THC needs to be decarboxylated first. 2)straight kief is far to big a thing to pass with the juice thru the wick to coil. It would just clog almost right away and none of the kief would reach coil.
2 Likes
you are welcome
mikelej14
THC for me replaces taking 6-7 pills a day. Good deal in my book, but not the government’s.
in Italy it is even worse …you can get the doctor to prescribe it ,but it ll cost three times more than the market common price and having impact on job card and driving license !
So sad … with politicians we have, before it passes a blessed law on tolerance / legalization I will be ‘already’ become fertilizer …
TKOL
You can already get it for your ejuice. However, you will not get that “high” feeling.
For all those who still think that the psychoactive effects are to be avoided … there are many other products and uses … as suppositories . xDD
Personally I just prefer to drop a few buds in a dry herb vaporizer.
me too…who dont ??? but vaping it not produce much smell, this method provides for maximum stealth and discretion without impacting those around you
1 Like
Kief is mechanically separated Trichome heads from the cannabis plant also known as dry sift. Hash is the compressed form of Kief.
Adding 190-151 proof Everclear to Kief-Hash shaking and then squeezing out the alcohol will give you a high grade alcohol tincture you can add to your DIY or off the shelf E juice for a very stealthy way to get your legal meds at all hours and places smoking-vaping is permitted with no one the wiser as my juice smells exactly like a dozen others being vaped around me. Better in fact but I never tell my secrets. A few hits off my first dispensary supplied cannabis High THC vape pen and later my own modified juice and it was nearly impossible for me to go back to smoking-combusting weed-hash-plant materials in general…
I don’t always vape modified juice but when I do it’s. LMAO I can’t figure out how to meme that one on here yet.
Bob
4 Likes
If I wanted to make some decently potent juice from some bho, how much would I need to make 25ml of ejuice?
I don’t expect one hitter quitter strength but something I can take like 3-5 puffs off and have a solid noticeable buzz on.
Would a gram of bho dissolved in a couple ml of pg400 be enough to add for a 25ml mix?
1 Like
mikelej14
I do a gram of kief in 2ml of 190 proof and squeeze out the alcohol with a coffee filter. I’ve got PEG200-PEG400 and PG blended in thirds I use like (EJmix) as transfer juice too… Both methods work with the kief I have. I don’t have any first hand working with BHO but the kief tincture works out to 10% of the mix to get a 3 or 4 hit high from. Best I’ve been able to achieve is about half as strong as smoking raw flowers is. I’ll take it as raw flowers is brutal to me now.
I’d try both methods on BHO, Heat blending PEG like many youtube vids on EJ or Puffmajic work and the old school ethyl alcohol tincture transfer since it lends so well to vape juice having alcohol in so many flavors anyhow.
Bob
4 Likes
Although I don’t have much to add on the subject of BHO and extracts (I’m in the UK so getting this kind of extracts can be harder), I have used a few QWISO methods to get something like what you describe and it does work quite well. It depends a lot on how you prepare it to how quick it all separates back out into individual components though, more cleaner extracts and methods may have better results!
I found this thread a while back when looking for similar things https://www.reddit.com/r/vaporents/comments/1sjj1r/four_different_methods_for_making_ecig_juice_in/ and ended up going the breaking bad route, a combination of method 1 and 3 works quite well too.
Oh, and no need to pre-decarboxylate THC, this happens when you vape it. Decarboxylated product is only needed when digesting it as the digestive system doesn’t trigger the process. Vaping does, so unless you are looking to sip your juice too, yeah, no need.
[edit]
One thing to add, when hitting these liquids, I find that anything over 20w just burns the mixture and gives a bad taste and I generally just use them in a little MTL tank with a 1.5 ohm coil at around 10 w. I bought a cheap eLeaf iStick 20w just for this purpose. Whichever tank you use will end up gummy and no matter how clean you get the mixture it will gum up even the best wick after a few tank fulls. I bought a load of the GS Air tanks to use like the pre-fill carts you guys can get; just fill them up a few extra times then throw them out with the coil.
1 Like
Well hey there @mikelej14. Long time no see man.
This is an interesting discussion. I don’t smoke weed, but here lately I have been paying more attention to it due to its anti-inflammatory abilities. I have a condition I can’t take meds for as I am allergic to ibuprofin, advil, and other nsaids, etc. They can’t do surgery, so I am basically a walking pin cushion of pain some days.
The fact that I am on disability makes me too scared to try weed illegaly and risk losing my disability. If it wasn’t for that, fuck yeah, pass me a spliff. So I hope they legalize it quickly, or at least make it easier for those that may benefit from using it have access to it as an alternative med.
I think the non THC cbd cartridges here are legal, so I am looking into that.
2 Likes
I made some 10mg/ml delta 8 in hot water bath but after I let it set it unmixed. some trying water soluble delta8 next.
1 Like
I dabbled for a while, after watching many youtube videos and researching the web, and was very successful placing a gram of distillate (budder, shatter, wax, etc) into a borosilicate glass beaker and putting it in the oven at 250 for long enough to melt (about ten or 15 minutes) and then dropping in peg400 and stir, put back in the oven for 5 more minutes, and you have approximately 700 to 800 milligrams of thc in liquid. The amount of peg400 that you use dictates the strength per milligram.
I was putting it in those pod units like the the Smoke Nord, and found them effective.
However, now I just go to the dispensary and buy THEIR vape carts and its all done.
Much simpler.
3 Likes
I’ve used a silicone container on a stovetop with PEG400 like this with good results also. In the head shops they had a ‘magic mix’ IIRC which was PEG
1 Like
I started buying the vape carts at the local dispensary. More of a selection than the flower they offer and I’m quite happy with the product. But on to my question…
Wouldn’t putting your concentrate in the oven at 250 further affect the decarboxylation? I have to assume the the decarb process is one of the first steps in the overall process, but applying additional heat is not an issue, in terms of the end result? 
1 Like
Heating it up to 250°F is what decarboxylates it. I make my own carts with this process. It’s very simple.
•Melt concentrate in borosilicate vial in oven at 250° for 20-30 min, until bubbling stops. (At the end I stir with a needle just to agitate the last bubbles out)
•Use eye dropper to transfer to carts. •Depending on concentrate/weather adding a drop or two of terpenes may be necessary for correct viscosity (added into vial just before melting).
That’s all. Then it’s merely fine tuning your preferences. Your specific process will vary based on your tools/atomizers. You’ll find the array of various concentrates also presents variations.
There are also rda-like devices that use unaltered concentrate. That’s what I use daily because it’s much simpler.
2 Likes
Nope! Works fine!
Now I do the same process, but with MCT oil for edibles.
Dont vape MCT oil!
Melt a gram of distillate in mct oil, stir into brownies from a box.
Do the math:
40 brownies, 800 mg of thc, 20 mg per brownie.
Prepare brownies as directed on box.
Dont eat too much, they’ll knock you into space.
2 Likes
Sounds like only 4 brownies at my house. You eat small brownies! Lol
3 Likes