I just lol’d to myself lol!!! fitting!!!soooo fitting!!!
1 Like
Just watched a vid where someone was coiling Ni200 for a temp control mod and used a threaded bolt to be able to get the spacing perfect; this was for single wrap type coils. Looked fairly easy and exact.
5 Likes
I actually tried this when I first got my flask . It seemed to work perfect until I went to pull it off and it just wanted to keep stetching . Maybe I’ll revisit it and be more careful .
3 Likes
The guy just unscrewed the bolt away from the coil so the coil stayed in perfect shape.
1 Like
I’ve seen this done too for rebuilding Nautilus BVC coils.
@MixedUp1 try unscrewing the bolt out of the coil instead of trying to get the coil off the bolt.
J
1 Like
Just fitted a 5wrap 2mm ID 28/28/32 fused Clapton @.49ohms into my SS plume Veil.
It’s a lovely cool dense vape.
Really makes my banana and coconut shine!
J
2 Likes
I’m killin the Goliath w no spaces
Very nice Zipper coil there @hoob
You should get in on the coil building show offs thread here.
http://forum.e-liquid-recipes.com/t/coil-building-show-offs?source_topic_id=13470@Jondamon There’s some really nice looking builds on there ain’t there .
That Newdrip fella is something else .
Have you ever Google build mode some amazing builds on there
1 Like
Im on a Clapton trip right now, standard, fused, parallels and I tried a stapled stag fused Clapton tonight but it didn’t turn out right. Lol.
I’ve been watching Squidoode on YouTube and trying to replicate his build with outside claptons with a ribbon centre then wrapped together to staple.
I’ll get there as tonight was my first try.
Yeah the thread is mostly @NewDrip and myself with a few others posting occasionally.
I find myself wrapping a different coil almost every night. Then every few days making wire lol.
Your zipper is sweet though man!
J
1 Like
Thanks .I didn’t have flat jawed pliers so I pinched it with some wet n dry paper was a real pain in the prick though so I only gave it about 5 passes .
The friction Got a bit much on my finger tips .
At the moment tho I’m liking just three strands of 0.25 mm (no idea what that is in awg) for an easy flavoursome build
2 Likes
.25 is around 30awg.
Most pliers these days have a flat section on them near the grips.
When smoothing the twisted wire it helps a lot if you rub some juice on the flat section of the pliers.
J
Iv still not tried my hand at a Clapton yet .
Should I belive the hype?
If you’re looking for a flavour build then yes believe the hype.
Claptons produce so much flavour it’s just stupid!
Then when you begin to wrap them in parallel with other thicknesses of wires/other claptons then you get staged heating occurring and because of the different temperatures of wires at different stages of heat up you get much fuller and differing flavours coming through.
J
1 Like
Competition Coil Builds… I found these builds on Instagram. These are some of the best coil builds I’ve ever seen. Hats off to these guys and gals.
5 Likes
Jesus!
…there are no words…
2 Likes
Looks realy cool. How it the flavor.Look like BVC tank ,but on a RDA. I have always like the BVC they just seam to have great flavor. That one thing I’m miss useing a RDA. Might tray a sub ohm tank. But it your “The Olympic Rings”. work great and Have flavor, I’m going to try this.What a great job, thinking out side of the box. Please let me know. about the flavor.
2 Likes