i´ll take som pictures 
upload soon just need to take it apart again 
4 Likes
6 Likes
I ordered 5 bottles from FT. I’m sure everyone did and the guys at FT are like “WTF, we should charge more for these bottles”
3 Likes
Hey @Nappen do you know what size Torx screwdriver that is ? I have all but that one
I’m going to try to use my rod from a old DB 160 ( but cut it down )
The battery door broke off after I dropped it several times
1 Like
yeah i know the size?
buth i cant tell u it´s a secret
Buth the tube is not the same on the Db 160 and the Gbox.
Torx 06 
is the number on my screwdriver
3 Likes
Way cool Thank You 
2 Likes
Thanks @Nappen for finding the right bottle and @SthrnMixer for sending me a bottle because FT lost my order somewhere in transit. Added some 3mmx3mm magnets in the screw holes and recessed 3mmx1.5mm into the posts. Came out pretty nice I think.
10 Likes
Way cool good job
Do the magnets hold the cover on tight ?
2 Likes
Yes, so tight in fact that I cut a slot in the cover with a file to help get it off. The door doesn’t rattle at all even. The door itself is fairly light, so 4 pairs of n50 magnets have no trouble keeping it there, especially combined with the groove it sits in.
4 Likes
did you have to do any drilling for the magnets to fit? Also, did you glue them in? Where did you get your magnets from?
thanks for reading and sorry for all the questions lol
1 Like
Do you or anyone else here know if there’s a USA based company that carries these bottles?? I need to get this done ASAP before I go on vacation 
1 Like
I don’t know any US vendors but here’s an Ebay listing that would probably work. Just judging by the photo it looks right. Can’t say for 100% sure though. Kinda pricey too but this or something similar may be your only chance of getting one before your holiday.
1 Like
@NMEONES Broscience is us vendor for modmaker, they have em but not sure which are softer
http://brosciencevapes.com/mm-squonker-bottle-kit/
Kidneypuncher has one and a refill bottle
https://www.kidneypuncher.com/search.php?search_query=squonk§ion=product
vapehappy has a few and the geekvape flask but always sell out fast
https://www.vapehappy.com/search?q=squonk&type=product
@Emerald_Void
https://supermagnetman.com/pages/magnet-types
2 Likes
Yes, drilled the posts to receive the magnets. 1/8" / 3mm twist drill, gently, by hand, to fit so the magnet is flush with the rim the drill will leave.
Yes, CA / super glue
Body D21B-N52 - Neodymium Disc Magnet | K&J Magnetics
Door D22-N52 - Neodymium Cylinder Magnet | K&J Magnetics
The magnets grab just right, it might be fine with all 8 magnets being the 1/8"x1/16", but I can’t say.
5 Likes
Way cool Thanks for the links
2 Likes
No man, whatever you have in that drawer full of junk in your kitchen does fine usually.
1 Like
The crazy kind w/ the pennies and paper clips stuck to it
1 Like
Thank you guys… I bought the MM squonk bottle and it’s awesome!!! Waiting for my refill bottle to come so I don’t have to keep taking off the battery door to refill . I really don’t want to start drilling any holes in the mod so I’m taking this approach!
1 Like
Unable to find the same size bottles on fasttech.