Wel we will find out. I got one coming. Billow V2 fir me lol. Plus 18 new flavors coming as well lol
2 Likes
I’ve come realize this is a much better tank without the coil barrel. Without the coil barrel it freeze up much needed space to build whatever you like in a tank that restricted your build options before. With the use of lowerer gauge wire it also resolved the issue of snapping wires that I had using .5mm soft Ti. Using a larger ID coil also allows for more cotton that eliminate dry hits. Now there is no compression on the wicking. It’s really free flowing… much better than before. I can crank this sucker up and get mad vapor and flavor. If anyone is concerned about leaking when it’s in a horizontal position, I haven’t had any issues at all with leaks.
1 Like
Am i reading this right. You have a 0.5mm coil? What gage. Thats a big coild diameter
Prior to removing the coil barrel I only used .5mm Ti wire, 2.5mm ID. Very soft wire and it easily snapped when I tightened the screws.
Without the coil barrel I use 22g Ti, 2.5mm ID contact coils. No wire snapping anymore and other advantages too.
The best part of is if you don’t like it you just put the coil barrel back in continue as before.
1 Like
Oh ok. Now im on the same page. I was thinking .5 ID lol. Well i get mine Friday or Saturday. Thats cool you don’t need the barrel. That would give lots of play room to build with. Lots of cotton i asume so it won’t flood
This is how I wicked it…
1 Like
Sweet. The biggest ti i can find is 24g. That looks good.
A lot of us have been gettin our wire from here with no problems so far.
1 Like
Since my leak is from the oring seal between the AFC side of the housing and the tank I guess i’m going to need your help in figuring out what the hell that has to do with the wick. It’s a small leak, more of a weep. It doesn’t prevent me from carrying it, but it’s a tad annoying.
Also been meaning to tell you that your description of the perique is spot on with the ‘rotten jalepenos.’
Do you mean where the tank screws onto the base?
Yup, the only thing you undo for a refill. It weeps probably 1.5 drops a day; just enough to be annoying.
That’s unfortunate. I can say, none of mine have ever developed a leak such as you are describing. Perhaps you have a damaged O-ring at that seal?
The leaking in which I was referring to would be juice coming out of the air intake holes or the mouthpiece.
I want to replace the screws on my Billow v2…any suggestions??
I just got mine today. And yup they super super small. Even my smallest Philips wouldn’t fit lol. So good question
1 Like
For me it’s the build quality that I like best and since I took out the coil barrel it opened up the ability to use low gauge wire. [quote=“sillyrabbit, post:2386, topic:14178”]
The deck had screws in it that i couldn’t hardly even see.
[/quote]
It’s a definite con for this tank. Some has overhyped it. Once you get use to building it, it’s solid tho. I use my white crown screw driver for those little screws.
1 Like
I will say this. For the build i have in here. And the wicking. This thing is doing really good. At . 0.26ohms at 45 watts. Its got great flavor and decent vapor. And no matter how long i draw on it. Its never a dry hit.
It’s definitely a step in the right derection. I will see how the crown is. What is your favorite tank right now ?
Sounds like you nailed it on the first try. It only gets better from here. It’s really a good tank. It lacks some of the latest features, but it’s still good none the less.
For me, I like building super low ohm coils with low gauge Ti… which I couldn’t do before. Now without the coil barrel, I really can build low and it’s better than ever.[quote=“sillyrabbit, post:40, topic:37284”]
What is your favorite tank right now ?
[/quote]
For simplicity and all around vapeabilty, (new word), I still love the TFV4 with the dual rba. Some has issues with it, but I give it 10 out of 10. Still on top for me.
1 Like
If they could just do this atty without the barrel to begin with. Put some bigger screws lol. It would be the shit. But i like it for now lol. I hate it when i can’t sleep. And i know i have to get up early in the morning lol
1 Like
A Velocity style deck would help tremendously and top fill. I hope they incorporate this in the v3.
2 Likes