I got my billow v2 last week. Put a standard duel ss coil in her. And she has been performing perfect. I’ve filled it up like 10 times now. And still not one drop of leaking. And great airflow. Then i just got my crown yesterday. And it works flawlessly as well. Im happy with both.
1 Like
My v2 arrived today, a day early, again!
…now that’s the way to do it!!!
I’m not going to build this up until I’ve got a new juice made…and coils built.
BUT that hasn’t stopped me from tearing open the goods!
I like that it’s both bigger and smaller than v1. The build deck and barrel don’t intemidate me, it’s really no smaller than a Goblin mini deck, the oring up top just makes it look intemidating…nothing to be afraid of.
Looks like mine has a little machine oil in it, but not enough for the chimney and top cap to separate just yet lol
I’ve got 2 nudges (machine oil ain’t one of them)
1: come on eciggity…make a drip tip that somebody will wanna use!
2: the bottom of the chimney with the juice channels that you fill through, deburr that shit! I’m hoping that oring doesn’t come in contact(with those juice channels), but I’m not worried…I will smooth it out myself.
All that’s left is to build and vape it!
2 Likes
Mine came so clean it was unreal. But i still cleaned it. And no the build deck isn’t that bad. I just put a little juice on the chimney seal. Snd it stays. I’ve filled it up like 10 times already. Really love the product. No leaks what so ever. Got my crown in as well and I’ve been vaping it for the last 2 days, and the billow. I really like the crown as well. No leaks on it either.
1 Like
Corrections…that’s not oil I saw, it was burrs on the 4 juice channels, I hit it with a qtip to see…no big deal.
And the burr I felt previously is around the knurling at the bottom of the chimney/base.
Again, no big deal…I can handle it.
Also got the chimney, top cap, and glass apart with a rubber gripper.
I’m really liking the idea of these low profile (thin) oring seals in black…the clear ones discolor with some juices, and they really don’t hafta be huge seals anyways.
BUT, still loath the look of the drip tip…but it does have a nice bore.
2 Likes
Hey pro…
I just got the dual deck for the tfv4. I like it so far but I think it is somewhat hard to build on with the top screws. What is the easiest way to build in your opinion and how do you wick? I tucked the tails halfway down the juice channels and I have gotten some leaking.
It’s easy to build. You just raise the screws a bit and insert the coils. You’ll get it after a few builds.
3 Likes
Thanks brother.
I did a ss build and it it was much easier than the first build. But the my wife’s x cube reverts back to VW every time. My x cube stays in temp with the same build on the crius… Strange. Do you think it’s a connection problem?
That’s a common exCube problem. I wish I could help with that. Some has figured it out, but I finally retired my one that worked sometimes and the other I never got a single TC vape from it.
Yeah it’s a strange mod…
My next vape purchase will be a DNA 200 device… But it’ll have to wait until next year.
2 Likes
Try: Menu: Options - Adj. Ohms - then dial it as low as you can - see if that fixes the TC->VW problem.
1 Like
Just built this tank up tonight, can’t comment on flavor, but I’m really liking how stout it feels, hits nice (I don’t hate the driptip after all) and the airflow control is buttery smooth!
2 Likes
Worked like a charm brother 
Now I rebuilt the dual deck and she stays in tc without lowering ohms. Now she refuses to vape with kanthal 
only ss. I am also hooked on tc… Going to buy 24 and 22g ti after Christmas as I don’t like the 26 get ti I have. But the 24 ss is a dream:raised_hands:
1 Like
SS and Ti is so much better than kanthal and nickel 
Glad you got it to work properly! 
3 Likes
Wire Wars!!!
1 Like
Yeah so true!! Going to fit my old subtank with 24 g ss tomorrow and the mighty godzilla v2 might get triple ss contact coils. Just calculated the build and triple 3.0id 8 wrap should come in at 0.12 ohms. Going to be a fun day tomorrow
2 Likes
Didn’t do neither 
been busy cleaning my smoker but managed to fit my Kennedy with ss coils. Now I love it even more
2 Likes
I got my kennedy yesterday. And i live this rda. Its well made. But i got mine from gearbest. In the pics and the description and pics they have. There was no name on it, the bottom of the addy was blank. When i receved it 5 weeks later lol. It did have kennedy on both tops. And made in usa with the sariel number. Way better then i was expecting. This thing is amazing
3 Likes
Liked the Billow v2 so much that I ordered the v2 Nano as well…haven’t built it up yet, but notice the chimney looks not only shorter but wider as well.
4 Likes
I keep 4 of the V2 Nanos in my daily rotation! 
2 Likes
The nano with the @Pro_Vapes mod is pretty much my favorite atty. It has everything. I have two, may need a second bellus…it’s just so hard to build, so it could end up as a third nano.
2 Likes