Such as Titan, Atlantis and Delta 2. Also on my evic-vt is it normal for the temp to hit temp protection almost right off the bat with a room temp coil? http://youtu.be/q7MhVnl5j8E
Any of those should work if they have the right wire and are spaced wrapped and can wick fast enough.
Anything you can rebuild is okay for Ti\Ni200 and on some TC mods SS, as long as you have a mod that will handle very low ohms.
Using cleaned Ti\Ni200 wire build a standard wrapped spaced coil and mount it in your tank/rba…
check your connections to make sure they are tight…
when wicking be sure the entire inner diameter of your coil is making contact with your wick…
dampen your wick, assemble and fill your tank…
put it on your mod…
At this point you should power up your mod and lock in your resistance when coil is at room temp.
Read your instruction book for the right way to set your resistance.
If these steps are followed you should have a properly functioning TC build / mod.
3 Likes
Ok thanks!
1 Like
I received my titanium today. Now I just have to figure out what ohm I want to vape and which Attie I want to use. I rally like around .5 ohms.