going into something!!!
the second up from the bottom is stainless gonna try the Goliath on my ipv4???
1 Like
Hasn’t @NewDrip found that SS is TC usable in TC devices??
Wicked wires!!
J
1 Like
I’ve been raving a lot about SS and how it enhance the flavor of eliquid. Have you noticed a difference since you been using yours?
Oh yes definately but it builds too low a lot of the time when I’m building fused etc.
It’s great in a standard 9 wrap dial coil or once I get my regulated!
J
1 Like
By low do u mean less than .1 ohm. What gauge do you have?
I could only get 25awg 5 wrap fused comes in at .18 and my battery gets seriously warm.
7 wrap fused and it takes a while to ramp up for a .21 build
I have made some claps using the SS and 36g but haven’t mounted anything using it yet.
J
On a side note.
Picked this up in my super market today for £1.50 for 50ml.
Will be making a 10% in VG sample later.
1 Like
My guess is that it will be weak, despite the color… 
I figured at £1.50 for 50ml it was worth a try.
But from a dab on my finger I think you may be right. And that was before being added to VG lol.
J
It was also the only flavouring on the shelf without rapeseed oil as a carrier.
J
Just put a build in my Petri
It’s using the following.
25g 317L with 36g Clapton. 5 wraps in parallel with
26/28 twisted fused Clapton with 36g wrapper using 4 wraps
On a 2.5mm ID clocking in at .21ohms.
@NewDrip finally started using the 317L again lol. Flavour is on point with this build.
4 Likes
Good Looking build @Jondamon aka CMJ aka CoilMaster J!!! You have definitely graduated the school of hard wraps.
3 Likes
Lol. Thanks for the compliments.
It’s a flavour beast to be fair.
Thanks to the small amount of single core 317 in the Clapton it ramps up super quick.
Thanks again @NewDrip aka MM aka Metal Master!
J
1 Like
2x Twisted Fused Clapons in parallel with Standard Clapton
Parallel Spaced Fused and Standard Claptons
Three wire types and four wire gauges.
Crazy clouds from this build. Thick Vapor!
4 Likes
You crazy SOB lol.
Bet that hits like a freight train and slaps you silly with flavour!
J
2 Likes
A sleeper build that I’ve just thrown in the Mutation X.
6 wraps per coil on a 2mm ID coming in at .27ohms.
It’s using the twisted 28g 2 strand that’s been reverse twisted around .5mm ribbon wire for a kind of tidal wire. (Pic earlier in the thread of the wire in question.)
1 Like
You guys are really talented. You should give some thought to marketing these beastly metal conundrums so untalented schleps like me can try 'em out.
Absolutely fantastic.
4 Likes
If I remember rightly @NewDrip has already offered out a graveyard of coils and a member accepted @Ken_O_Where was the member who snapped them up.
Where are you from @Lostmarbles?
I’m quickly building up a graveyard of coils and wouldn’t mind gifting some to people who either don’t have the time to create them or can’t create them.
J
4 Likes
@NewDrip
I’ve got some 38g Nichrome80 on order not sure what I’m going to do with it yet lol
J
1 Like
That will make some beautiful Fused Claptons.
1 Like