We’re trying to walk him through the difference between a USB port and a DisplayPort connector, and you wanna lead him off into NVMe land??
C’mon man.
I thought he was joking earlier about the USB port… Clearly (now) he was not.
Let’s keep this on target, and as BASIC as possible please.
I was hoping that others (such as your good self) might be there for him, regarding the accompanying rigors. Was being a bit sarcastic (about the NVMe SSDs), I suppose. Regards to your kind expertise. I think that I have provided some meaningful information on this thread. That’s all. Good luck to you all !
@Dan_the_Man
Watch this video please!
The part about DisplayPort starts at 2m50s.
You really should watch the whole thing though. 
The DisplayPort is what you’re mistakenly calling USB.
@Dan_the_Man Display Port is the newest video out connection from your GPU. Typically, can support higher refresh rates, typically HDR, etc.
In the order of the food chain from LOWEST to HIGHEST performance:
DVI
HDMI
Display Port
Well to be fair @Sprkslfly, shit HAS gotten MORE complex, than the old “Any Old VGA will do” plug ins.
@Dan_the_Man, you’re doing good. Take a CLOSE look at the connections on the back. May LOOK like a USB, but …
All good Dan.
@Sprkslfly
@SessionDrummer
@Raven-Knightly
Yes, I went and looked it up and watched the video. LOL, it is basically common sense, which it seems I don’t have much of. Well, I got that part figured out anyway.
I finally figured out how to hook up my stereo to the PC audio using the GPU
As for the NVMe, I don’t have the cash for that yet. A question though, the MB has two ports for an NVMe, does that mean I can use two of them or do they have two ports for convenience?
Dan what MB you running ?
Asrock B450M Pro4
I think playstation just came out with a remastered Descent if I am not mistaking.
Need some advice my friends and maybe even more than advice. 
Ok, got it built. I have 2 fans in the from pulling in air bunt nothing in the back blowing the air out. There is a place for one (apex 4.5in x 4.5in). If you could recommend a decent fan that isn’t expensive ($20-$30).
What I really need to know is how to make sure my PC is running efficiently. Do I need to overclock? or do anything with the GPU?
I just learned about overclocking. Some say don’t need to and others say yes you should.
Dude, I’m just in awe that you are building a computer. I can’t even fix minor things
I watched and read a LOT of material and still need help and am grateful that I can get it.
Don’t worry about the air getting out of the enclosure if you’re pumping it in wit 2 fans. Just install a program to watch your temperatures but I’m sure it will be fine if you don’t have 110 degrees in the room.
With the efficiency and overclocking… I would first make sure it runs on the specs it’s supposed to. So make sure it runs on the Mhz it’s supposed to and that the RAM is set correctly in the bios. As long as you don’t have a killer application which is hungry for more power then you can think about it but to be honest, your cpu is not bad at all so I’d give it a go first and monitor the temps. That’s a good indicator for the work it’s doing.
Dont worry about overclocking for now if I were you. Just make sure everything running smoothly.
Agree - OC not necessary - but if you want, here is a review where they go through overclocking that particular CPU:
I would definitely install an exhaust fan ASAP - it plays a role in cooling (Although you want a positive pressure inside the case)
I would get something like this:
Newegg:
https://www.newegg.com/noctua-nf-a14-pwm-case-fan/p/N82E16835608044?&quicklink=true
Or
https://www.newegg.com/p/1YF-001D-00017?&quicklink=true
Amazon:
https://www.amazon.com/Noctua-NF-A14-PWM-Premium-Cooling/dp/B00CP6QLY6/
Or
https://www.amazon.com/quiet-BL071-SILENTWINGS-1600RPM-77-57CFM/dp/B01JME13SW/
It’s usually a 140mm fan in the rear… What case are you using?
I’d check the temperature first if an exhaust is necessary. In my experience cooling is not such a big thing anymore. And then I’d rather use one of the two existing ones as an exhaust before I buy another one.
@daath Thank you sir. much appreciated.
@Bad_Influence that’s a good idea. So far the CPU has gotten to 35 degrees Celcius which is about 80 Fahrenheit but I don’t know if that is hot or not. When I look at the master it looks ok