That doesn’t stop you from playing Amy… The whole idea here is to make a tasty and SMOOTH ejuice. Could be quite possible it can only be done with FA, Inawera, or the like…By all means, Go Blend Happy…(New Vape Term)
3 Likes
Do you have a premium juice line or is all the same price?
Click then click again on picture to enlarge
1 Like
I did figure it out ! Thank you lol
1 Like
I’m no expert by any means to making my juices so take this as a grain of salt coming from a beginner and this being my second post here.
I was doing some digging about a week back and I seen a recipe( I can’t say the brand or where I seen it) that was 85% vg, 10% pg, and 5% Dw. I have vapped tons of this brand that’s uses these numbers and just can’t get enough of the stuff.
Let me know if this works out and is what everyone is looking for.
1 Like
Ringling have you ever used TPA’s caramel cappuccino? It is the strongest flavor I have ever used nothing comes close to how strong it is. Well I am experimenting with this as well also I believe the DW was at 2.5% on this one. Made them last night will check on them in a few days when I’m off work again and let ya know how the progress is goin !
Hi Amy;
The Mexican Liqueur I have I believe would flavor a 99% DS mix with no problem. Just would rather see what can be done with flavors we use more on a normal basis. Make sense?
1 Like
Yes, that is a good mix. Probably some very concentrated flavors are being used. I have made two recipes with 5% DS that worked. Now trying to stretch that DS to 8% which might be difficult. Also my PG is higher because the flavors available to me are not as concentrated. There’s your difference.
1 Like
Guess I missed this question. Yes, I do a MaxVG line in 30ml amber bottles of my absolute best flavors. About a dozen flavors. …
2 Likes
I was thinking if you didn’t have a Premium line to test a small line using FA / INW / FV and price according to your extra expense. I’m thinking batches with these vendors should taste better and customers may pay the extra price for the top quality flavors. I was looking at @SirRisc latest review Flavourlab.de started a line with only 4 flavors. Something like this may work with premium vendors flavors. Me personally, I don’t mind paying extra for top quality.
4 Likes
I diluted the caramel cappuccino like 2 drops in 10ml pg …it was only then usable
2 Likes
I diluted the over all mix at 2% DW. In times past I have taken like 1 ml and paired it with 3 ml pg but have not considered using DW when diluting it as a flavor concentrate hmm maybe I will do this in a small 4 ml glass vial and set it aside ! Thanks
1 Like
@ringling I tried the 2.5 % DW mix today it had 28% flavor some of the roughest toughest flavored out there like TFA cappuccino and it actually tastes smooth no harshness like if I’d taste if I dare to vape this w/o the Dw. So , so far 2.5% is a hit with smoothing rough flavoring !!!
cap DW test 1 2.5% : http://e-liquid-recipes.com/recipe/164221/cap+DW+test+1++++++++2.5%25
4% Caramel Cappuccino (TPA)
2.6% DW
4% Horchata (CAP)
4% Marshmallow (FA)
5% RY4 (VS)
4.4% Sweet Cream (CAP)
4% White Chocolate (TPA)
Flavor total: 28%
Remember to rate it at: http://e-liquid-recipes.com/r/1fFp
This was meant to be strong strong flavors the marshmallow and cream was so i could tolerate it lol.
Normally TFA recommends 1 drop per 10 mls for cappuccino i have it here at 4% i could not vape this w/o choking my butt off if I didn’t have the DW in the mix…we’re on to something here Ringling !!
2 Likes
Hi @Amy2 Sorry I’m not keeping up very well. My house and shop flooded and I’m busting _ss trying to get things back to normal here. Have not been able to blend for the shop let alone experiment…
Remember Amy, By adding another 8% flavoring you have added another 8% PG. Somehow we need to keep the flavoring a maximum of 20%. I’m gonna try some more simple 2 flavor recipes as soon as I can like a simple Peach & Bourbon. Think I need to tone down the flavors till I get a feel for this. I also think it’s gonna wind up 5% max on the DS.
Also, the very first recipes I tried with the 5% DS, Nuts on the Barbie, seem to be strengthening as it steeps. It’s been 15 days since blending. Perhaps a 1 month steep would solve all problems. We’ll see. There was 2 blends, 70 VG, 5 DS, 25 PG and also 75 VG, 5 DS, 20 PG. The first Blue Distilled Water version I can not even find to check up on. My shop is still in a absolute uproar…
Also, you have that blend marked as private, no one can see it…
Hey so sorry to hear you got flooded that is terrible. Ok when I get some time again I will follow the 20% rule and go from there.
I had it private be I didn’t want anyone to try it be sounds disgusting but it was decent. I posted the recipe under that link so you can see it.
I myself am busting hump moving to Seattle so we may be a month or so out b4 we can get back to " normal play time " I make juices for me to vape but usually it’s a rushed thing unfortunately try to do 5 at a time and then back packing.
2 Likes
Hope this is useful
http://atmoslab.com/en/announcement/vg-and-pg-vs-temperature
If you look at the chart the addition of 5% water reduces the boiling temperature of VG from 290 Degrees to 167
at 10% you are down to 138 hence the explosive popping.
I use 10% Aqueous VG 72mg Nicotine Concentrate in some of my 80% VG mixes.
These are mixed to 6% nicotine strength. The resultant distilled water content is about 0.2%
This is not enough to significantly reduce the overall boiling point of the juice.
4 Likes
Huh good to know. Makes sense to me the boiling point is lowered and that is why the thinned VG mixes always seem to pop especially in an aspire coil rough on ya sometimes!
Hi Amy; I’m trying to move this discussion back to where it belongs, in the DW thread. Anyway, let’s make a standard with this that we can stick with and possibly come up with some decent results.
First, let’s use 5% DW in all mixes deducted from the PG side
2nd, Let’s blend 70/30 blends so we have enough carrier for the flavor, plus use on subohm and tank
3rd use no more than 25% flavor which 5% of that flavor is actually DW
Here’s my latest attempt just before the flood. A simple Peach bourbon which seems to taste good but this batch you can’t really taste the peach. Need to bump up the peach since the bourbon is so strong a flavor…
Thank you I was looking for the thread to try and do that as well. Ok I’m going to book mark this.
Going back to sleep. Night shifter 
I work next 2 days. So maybe I can start on the project on Friday.
1 Like
I tried DW @2% in a 30ml max VG mix and got an insane amount of snap, crackle and pop in tanks and drippers; so much so, I just had to trash the mix 'cause I couldn’t stand the noise!
Can’t say I’ll be using DW in a mix again anytime soon.
2 Likes