Handchecks (2020 - 2021)

[Deb50]

With or without the cover I like it both ways.

[rcleven]

Bought the one you recommend. Loved it so much went to Armageddon and bought 3 more. Not much of a selection left but for $6.00 apiece couldn’t go wrong.

[FL_Vaper]

I like that SBS, which one is that? What’s the largest atty it will hold?

[Deb50]

It is an Abyss and I believe a 26mm is the max

[JiM210]

Not a color match, and not the RTA I had in mind for the Siegfried. Pictured is the Vapefly Siegfried tube mod with the new Hellvape Dead Rabbit ‘R’ RTA. They are a good pairing other than the colors.

https://www.everzon.com/products/vapefly-siegfried-tube-mod

https://www.healthcabin.net/hellvape-dead-rabbit-r-tank-atomizer-p/27335.html

Dead Rabbit R Tank - Building Tutorial | Hellvape

Easy build. Only takes seconds.

[NeonKoala]

I know podmod aren’t popular, but I like having them around for when I’m working around the yard Just picked up the Geekvape Obelisk 65

[D-a-M-o-N]

I’m really liking this the color the square the little tip the only thing I don’t like is the buttons inside they should have made a cutout so you can see the screen I love this. The rebuildable part is odd because the air is on the opposite side of the intake mine burnt right up but I’m not really a rebuildable …rebuildable stock coils yes PLEASE!

[SessionDrummer]

Agreed on the cutout thing @D-a-M-o-N.

[Grabbo]

Sounds like your base was back to front on that rebuildable .the pnp coils rebuildable go in a boro tank dovpo do an adapter for the abyss mod

[D-a-M-o-N]

Yeah it has a screw over a 510 pin like a plastic screw circular I don’t even know what to call it dial. The cutout for the whole for the air to enter faces 90° away from the air inlet.
And there’s no air inlet in the back unless you take the panel off there’s one up top but that doesn’t do much good cuz it’s an inch and a half away.
You can unscrew the plastic tile and actually screw it onto a regular mod that’s how I dry burned the coil.
But when you screw the dial back on it screws all the way up to close and then 90° back to open it’s odd I figured I’d try it didn’t work the VVC coils I was able to rebuild from the jackaroo ones they’re just like the PNP but go in instead of out pop the top off and rebuilt it with a PNP from SRMT WOTOFO PNP version. Surprisingly those smrt have a really good flavor I wish I got a hundred coils and meshes from them instead of hell vape with my dead rabbit RTA r tank

[Grabbo]

Yep the pnp srmt coils are dam good I got the pod tank for when I’m working on the truck and just keep going back to it sometimes it’s not how much it costs to get a dam good vape.I’d check some rebuild vids on that pulse boro see where your going wrong I know they have a back and front ,I don’t have that boro the ones I’ve got are a cracking vape and so easy to put in your pocket it’s worth it

[SessionDrummer]

REALLY enjoying the SXmini SL Class v.2 for the current round of VSO Flavors.

[D-a-M-o-N]

Yeah it’s strange I wish I had it in my hand so I could take a picture it only goes in one way even if you flipped it around it would still be the same thing cuz the 510 pin is part of the bottom base screw it I don’t build much anyway so I like to pre-made and now that I have the dead rabbit and I got a hundred message and coils that came with it for like $4 I’m good for at least a year and a half I will say the hell vape cotton and mashes nowhere near good as the smrt. I have the smrt for baby beast and for the PMP totally worth buying again I bought the five pack for the baby beast so I can have five premades apparently my microphone does not like the word mesh

[Ianc13]

Cold but not raining for a change today. I am not a fan of winter, give me dry heat any day!

[Ianc13]

Another cold but nice day. Different set up today in looks but basically the same in brand, build and vaping experience.

[Ianc13]

Drip testing mixes this morning on my “not a pod” MTL set up.