Thanks dude 
Denmark
Ok, so the “Aroma” states “Use from 10-15% in your base”
https://pink-mule.com/secrets-blueblueberries-flavour-10ml-50ml-uk
Your base will need to be worked out from your VG/PG but as it has Nic in it already im not sure how to do that…
https://www.atmistique.gr/pg-base-black-label.html?sl=en
What Nic do you want to vape? 3mg 6mg 12mg?
Can you post links to your products please in the first post?
3 Likes
Ideally you want your VG & PG (0 nic) and your Nicotine (48mg/ml - 72mg/ml) separate
1 Like
Yup black label PG as you linked and blue label VG
https://pink-mule.com/blue-label-vg-vegetabilsk-glycerin-base-500ml-0-100mg-dk
I bought 500 ml each with nicotine so I’ll buy them separately next time😅
2 Likes
I prefer 6 mg
if your Nic base is only 6mg, anything you add to it will dilute the Nicotine. If you want a 6mg eliquid mix you have to start out higher like at 12mg or 36 and then dilute it down to 6mg with the flavors and PG/VG with no nic. let me find the link to the begginers guide for ya…
3 Likes
about halfway down his first post he talks about Nicotine base and a quick little blurb about how to estimate what strength to get. Welcome! and Happy Mixing!!
7 Likes
What Jayrell Said 
2 Likes
Hope you have your problems worked out. Not sure if you found this information on the site:
http://e-liquid-recipes.com/guide
Might be a good idea to refresh your knowledge.
2 Likes
Welcome to the club, and congrats on starting the journey
1 Like
Thanks for your help guys, really appreciated 
He says in his beginners guide, that your desired level of nicotine (which in my case is 6 mg) and then he says the strength of the nicotine concentrate… I don’t get that part
2 Likes
The problem you will have is that @6mg/ml strength you will always end up with finished liquid that’s less than 6mg/ml because the flavour concentrates will dilute it further. So if your adding 10% flavour then you’ll be diluting the mixture by 10%…e.g.
It would end up @ 5.4mg/ml strength.
Does that make sense? 
I see what u mean😋 Thanks !
But I have a final question😂 I still don’t know how to mix my stuff… you see, I don’t have PG,VG and nicotine separate, I have 500 ml PG with 6 mg nic and 500 ml VG with 6 mg nic.
The guides I’ve read have VG PG and nic separated, so really I can’t use them ATM. 
If someone could make a simple recipe with my stuff in a 10/30 ml bottle, I would really appreciate it 
Aight thanks bro! I’ll try that one out
1 Like
I think I know whats confusing you. You have PG and VG with nic. You can use one or the other to make your recipe but not both.
This Calc. I think makes it clear:
https://ecigvape.com/e-liquid-calculator-with-pgvg-adjusting
Try filling it out and take a snap shot to confirm correctness --then could post.
<img src="/uploads/default/original/3X/7/8/78bfdf850c0cc06c61187ca456d2b2e3a2db331c.PNG" width="281" height="499">
I don’t know if I’ve done it correct
What you have told me is that you want a mix of a single flavor at:
15%.
6mg, 15PG and 85%VG.
Total mix = 10 ml.
The only PG comes from you flavor.
If you wanted all PG, you could have used the nic in PG instead of the one in VG.
The above is what you have. Hopefully, it’s what you wanted.
Perfect, thank you very much brother bob
1 Like