Yes, it is illegal to harvest. Grandfathered “old stock” ok to sell if it can be verified that it is old stock before the harvest ban. I purchased a small supply years ago and glad I did.
My favorite drip tips by far. I have a bunch of these, Teflon, Pom, and resin. They are friction fit and extremely wide bore.
I like these:
It’s called oneboxing - not all sites are supported… If it’s supported, putting the link on a line by itself is enough to do the fancy display thing If not - well, then you just get a link
I’ve been enjoying these lately:
Not sure who makes them, but I got it from a local vape shop. And apparently it’s a local artisan.
I’ve been wondering if you used that and if you dressed up your tank with those o-rings. Did you? I’d love to see a photo
I am buying more and more kanger nanos I only have one mini but when I drain it ( it’s almost empty ) I’m going to put the o-rings in there you got me I just didn’t want to waste the juice.
Nice! Did you not find the pink o-ring kit? That’s for a subtank mini. Not that you needed to use them but if you did I bet that would look suhweeet.
I like the tight draw it gives as well as it staying cool still is a real plus and then add it is so pretty hard to buy a plastic crappy regular one to top that.
I like the vase drip tip too and the shorty I think you can see them on the left on the lil vision vv/vw batteries
Oh wow, that is sharp!
Have you had a look at the UD ZEPHYRUS V2 ?
If you like a tighter draw this tank could interest you. It takes various coils and rba available but one of the stock coils are 1.8ohm and you restrict the airflow to your liking.
Makes for a nice mtl.
Never heard of it. I will check it out. I was using kanger’s mini protank 3’s for years and got the mini subox and then later the nano which are so much better and upgraded. It is the MTL that keeps me in this style of tank. I just don’t tolerate sub ohm hits for more than a few and then it’s just too much.
I also have natulius and the mini I really love those tanks as well.
But as far as drip tips go I don’t like the wide mouth chubs nor do I like metal anything on a drip tip. So I will look around for more choices.
Theres a set point on the afc for mtl draws and its a really nice vape. 1.8ohm single coil plus various others and rba.
Top fill, really well made. Yes it does have a metal drip tip but you can replace it with your own because it’s a standard 510.
I’ve got the lemo drop, the ubertoot, a subtank, the nautilus and a cpl of other mtl’s and this has the best draw I’ve came across.
You can do lung hits, however they are restricted somewhat, even more than the billow v2 with the shroud on.
To top fill just rotate the top.

My gosh Pattie I will need a plug to stop that hole up. I did some looking around on this UD zep V2 and finding the 1.8 ohm coils seems to be a PITA and if it is now it’s only going to get worse as the tank gets older and newer tanks come out. I like all the specs it offers but as of now I am still unsure to pull the trigger on it. Besides like I said above that is a huge looking hole what drip tips do you use for it ?
I normally just use the standard drip tip that comes with it or i have glass, glass and resin or a derlin. I have a few more on the way from FT, various designs.
Just thought I’d mention it to you as you seem to like your mtl tanks.
Thank you, very sweet of you to do so ! I think it is a really nice tank but it does seem that the 1.8 ohm coil ( which I think is nice they added that feature ) gets left out bc most ppl aren’t looking for that coil in this tank. So, a typical 510 drip tip will fit it ? Ok it just looks large from the pic.
Yes standard 510 drip tips fit.