I came across this thread with some good info about extending the life of your LiPo Batteries…
Hcigar DNA 200 Battery
http://evolvapor.forumchitchat.com/post/proper-battery-conditioning-7783687
2 Likes
So in short set Wh to 11.43 (or 14.43 as I’ve read elsewhere as well) and cut off to 3.09?
Mine are working fine so I’m not changing a thing.
cell soft cutoff put that at 3.7 (you can go down to 3.2 to get more batterie time vaping… but the lower you go the shorter the batterie life total will be )
If I couldn’t replace my batteries I would consider this.
You can run the battery analyzer on a full charge and then upload to device for accuracy.
For better TC you can also input your mod resistance… Hcigar is .0045
1 Like
Let me ask a question. I read in Escribe software to connect a 40watt cable. I can’t seem to locate my user manual for the device but I also can’t imagine there’s any load on the supplied cable. What kind of makeshift can you think of for providing this load without having to buy this cable for a one time thing?
EDIT - I need to wear my glasses more often. It actually said a resistor capable of sinking the test power you choose (not cable), and 40w was reasonable. I get it. Put a RDA on there with a build that can handle 40 watts. Duh. I’m going to do that this weekend and see how it goes over the next few days. Battery performance has been good but if it improves that’s great. Will report back.
Why do you guys put up with me?
1 Like