its the Gta not the rta, i would have no probs with that 
1 Like
I was wondering that lol
Maybe this helps…
i have been there like 50 times, its beginning to feel like poor design, but im still hopeful
1 Like
Any thoughts on the GTA’s flavour production? The airflow outlet under the coils looks awefully large to me… if you’re not throwing 50 or more Watts at it, would it be any good?
45 watts and its good, ive put a small alien in there
but it doesnt matter when the juice doesnt get to the wicks…
1 Like
I can’t tell from the photo but your wicks need to come all the way down through the chamber to the very bottom of the gta. If they are I would try priming your wicks first and filling the tank first if that is possible. I don’t have one but I might want one to see if does what yours is
ill try later and post some pictures
wicks are all the way down, its really horrible, the air in the bottom makes for mad wicking = dry hits
Mike vapes even says that in hes reveiw, that juice doesnt go down, its so badly made…
yeah when I first filled it I noticed, but I took a couple of blasts on it and the liquid warmed and sank down, not had any dry hits with it at all, I love the thing, it is snug but it hasn’t been an issue for me have to be honest, have you tried sucking on it as hard as you can a few times without firing it…?
1 Like
Bahahahaha 
5 Likes
I used to tell my ex the very same thing every weekend
2 Likes
And you have the nerve to call ME a gutter brain 
It was a perfectly innocent reply …
You only have to Look at mine and it fires…Prob my age…
What??
2 Likes
Takes one t know one 
4 Likes
touché dear…touché 
2 Likes
You two are cracking me up 
2 Likes
On a slightly more serious note…yes…it happens from time to time…
As you can see, apart from the occasional bubble down there mine is absolutely fine, and this was just filled with cold liquid, went straight down, if the problem persists try using a syringe with a blunt needle if you have one and suck the air out, once it’s out there’s no reason it should keep reappearing as long as you keep topping it up.
2 Likes
I use the OBS engine and it is a great RTA but because it’s pretty airtight if you don’t leave the juice fill port open for a few seconds after filling you get a nasty air bubble in there.
I suspect something similar is happening here, also the space between the chimney and glass looks tight, I bet a 60PG/40VG liquid would have no issues
2 Likes
Like that drip tip 
1 Like