Looking to see what people would recommend for mesh RTA? And what meshes would you order with them? I’d like to make an order that will last me for a while.
I’m still rather new to rebuildables, and I have a Steam Crave Aromamizer Plus V3. Which is great, but I’m only wicking it right half the time…and it leaks when i get it wrong. I think I’d like to add a mesh rta for when I’m out and about.
I have a GeekVape L200 SE that ill be using it with.
Thanks in advance for any help!
Any WOTOFO Profile you can get your hands on. In my opinion they are the Timex of mesh RTA’s. They take a licking and keep on ticking. A little of a learning curve to wicking but once it’s learned you won’t be sorry.
Now the SC. It’s one of the best RTA’s on the market. I have 3 or 4 of them If it’s leaking it’s because your not putting the build deck in the correct position and getting the deck O ring to seal… Line up the wicking holes of the deck to the juice flow cut out’s push it in hard so the O ring seals then screw on the bottom ring and you should be good to go.
Thank you! I was looking at the WOTOFOs, is there any mesh that you would recommend picking up with a Profile?
And lastly…cotton. What works best with mesh decks?
Thanks, I really appreciate it!
Edit- ive also noticed when i thin the tails too much on my SC, it’ll leak when its not held straight.
I have also made that exact mistake that you’ve described more than once to be honest lol.
Depends on how you like your vaping temp’s. The coils are cheap. About $10.00 a box. A coil will last about 120ml before they get gunked up. Over time try different ohm coils to find the best for your style. Cotton? Look for something in the 5 to 6 mm range to get it as tight to coil as possible. Cotton Bacon is 6mm and should get 2 wicks per strip.