USA United Squonkers of America

Hardware Hardware - Mods etc
995

I just ordered the YFTK Sentinal RDA
it looks like a good one I like the top airflow :+1:

4 Likes
996


looks nice since u can use any chubby to switch mixes when u want, only concern would be the delrin threaded connection vs. geekvape’s which i heard was s.s

2 Likes
997

I love the FLASK you can use it with the 510 or as a drip bottle and the price has come down :smile:

1 Like
998

i havent took the plunge yet but pay attention to the conversations of those who do. I heard the flask was nice but that came to me in email and thought have its place since u can use any gorilla and change out mixes easier if so desired. It would be a cheaper alternative then buying more of the geekvape ones, just thought id share.

2 Likes
999

Item Name Qty Price Total
Geek Vape Flask Liquid Dispenser 2 $18.99 $37.98

Regards,

Eciggity

Plus at the time I had a code

code at the top of page ( TENOFF )

3 Likes
1000

Thanks for sharing Mike’s video. I just gave my Gbox an upgrade. Thanks to @Nappen for doing the testing to see if the bottle would work. Now I didn’t even consider doing it Mike’s way, simply because I think continuously connecting and disconnecting that surgical tubing is just going to wear it out and start leaking. So I opted to do as Nappen did, and remove the ss tube and the little bracket completely, then install the new silicone bottle.

Looks awesome IMO. The refill with a 510 squonk filler is easy, but just in today…the Geek Vape Flask. It’s much easier. But either one does a fine job, so you can find the little Boston Round ones for around $5 while the best price I’ve found for the Flask is on eciggity…

Also replaced the one for the Drone

7 Likes
1001

Way cool I have a tall Lost Vape bottle that came with my Lost Vape Refill bottle that would work perfect for going @Nappen’s way :smiley:

I just like to take out the bottle to clean it without having to take out the screws of the mod I feel that after several cleanings it might strip the threads on the mod but I’m going to try to use a old rod so I don’t have to cut the Gbox one :+1:

2 Likes
1002

Alright, I like the Kanger DB160, is there any other decent non-mech mods that are good?

1 Like
1003

https://www.elementvape.com/aleader-killer-80w-squonk-box-mod?enter=true

aleader_killer_80w_squonk_box_mod_all_colors
aleader_killer_80w_squonk_box_mod_all_colors.jpg700×700 65.2 KB

3 Likes
1004

Weren’t they having problems with the 510 leaking with that mod? Or has it been fixed? I was tempted to pick one up before I read about that.

1005

If it’s an original one of the LDPE bottles I don’t think that’s any better than the stock. The LDPE isn’t bad until the bottle gets about half empty, then it becomes an utter bitch to squeeze. That’s why I replaced the one on the Gbox and the Drone. Those are soft silicone bottles and just so easy to squonky squonk.

If you like your power, so far the Gbox is an ace. Nice power except for in TC which is limited to just 80 watts. Maybe your builds would be ok, but the way I build is almost half of the watts I need.

Another member and I have discussed it, and while there’s a little work involved, replacing the supplied LDPE squonk bottle with a silicon one and the squonk bottle compartment cover’s screws with magnets will make this a much friendlier and efficient mod. I’ll be getting to the magnet thing in the next month.

3 Likes
1006

I did not know that I just saw the ad in a e mail That sucks if it leaks it was a good price :frowning_face:

1007

The Lost Vape bottle I got is soft silicone it came with a silicone Refill bottleLVRSBB-2T


The squonk bottle has to be more than 7ml ( but I did not check )
$14.99 is a good price for both But I like the Flask refill bottle better

2 Likes
1008

I’m on the hunt for a good refill bottle. Just ordered a couple of these:

Hoping they work out as 60ml Chubby Gorillas are what I use daily anyway. If not do you have a favorite refill bottle?

3 Likes
1009

YEP The Flask because I can throw it in my lunch box for work and I don’t have to worry about it getting squished. It’s also nice to pre wet your cotton with the small tip

Now like he said in the video it would be nice if they came in different colors

5 Likes
1010

And now we have the clone But it has a PET bottle

http://www.3fvape.com/misc/21123-authentic-coil-father-liquid-dispenser-for-squonk-mod-rda-rta-silver-aluminum-pet-30ml.html?utm_source=EDM&utm_medium=20180202&utm_campaign=BushidoRDTA&utm_content=edmp21#.WnTJfWPuepE

3 Likes
1011

PET? That’s horrible!

1 Like
1012

Yeah thats why I put it up so people would know it’s not a Silicone bottle

1 Like
1013

You’re a champion!

1 Like
1014

Question for everybody. How are the silicone bottles holding up? Personally I have concern of flavor retention. Bottle degradation from flavors and etc!!!

Remember the old days when we worried about a flavor cracking a plastic tank? Well that was slightly befor my day but right when I started vaping.

3 Likes