Uwell Crown 2 coils/RBA

Hi,

Anyone know where i can buy those darn Uwell Crown 2 coils (0.8 ohm?)
Looking for a US cheap store wich sends to the Netherlands. (Dutch stores ask 20 dollar’s or so…).

Is it possible to buy an Rafale VRBA kit, and replace the cone? Disassembled an Uwell Crown 2 coil, wich came easily apart. So it might be possible to put the cone on the Rafale coil/VRBA.

If anyone tried this, let me know!

Anyone ???

Try here? - http://www.gosmokefree.co.uk/4-pack-uwell-crown-2-sub-ohm-tank-coil-heads/

EDIT: “NOTE: THESE COILS NEED SEVERE
PRIMING BEFORE USE, IN A BIG WAY, OTHERWISE YOU’RE GOING TO GET A NASTY
TASTE. ABSOLUTELY SOAK THE COIL AND SUCK LIQUID THROUGH COIL BEFORE
HEATING UP COIL”

1 Like

You could try this:

WARNING: Ive not tested this!

“If your struggling to find crown v2 coils, then you could buy some rafale coils. You would need to take the positive part off your existing coil (the gold bit) when you change it and put it on the new coil. But as long as you do that it should fit.”

1 Like

The Rafale RBA fits correctly I know because I use it in mine and I have heard others say the Rafale coils fit and and are preferred to the stock coils which have problems.

1 Like