I’ve had mine since Thursday. Got the firmware installed yesterday. First time I flashed it I got a brick, wouldn’t even come on, tried again and it worked. What a pain in the ass. The thing is so freakin big I haven’t even carried it anywhere. I think I want something a little more practical and the way prices are falling shouldn’t be hard to pick something up for $40. I will hang onto this, spend enough time just sitting in front of the computer to use and enjoy. I am having trouble with it reading my Mutation X 3. I’ve got a dual coil 28G kanthal. All devices except the Cube read the ohms at 0.4 no issues. I put it on the Cube and it says check atomizer. It came up one time at like 3.?? ohms and went off. What the crap? I use that RBA to do tasting with and would like to use it on the Cube… Any suggestions?
You should look into the eVic VT 60w. There is a $45.00 sell right now in the deals section. It’s simple and straight forward to operate. Kanthal, Ni200 and TC modes make it highly functional for most vaping needs. It’s my 3rd favorite Ti mod. You should also be comfortable with it’s size.
Size comparison…
I looked at that one but I want something with an external battery. I got 6 new 18650 and my old mod had external, my husband had one that was internal. I like being able to take one with me instead of worrying about a charger. The biggest problem with the mod I was using, it is a Zero mod, clone I believe, at the time it was like $100 at a local B&M, anyway is the battery door. It’s one of those with the coin turn slot. Such a pain to remove and put back on. Probably isn’t worth 1/4 of that now but it still works and looks ok I fell and scratched the finish on one side but shit happens.
There is a new eVic VT 60w with removable batteries but it’s preorder only. There are several good single battery TC mods too. Most have battery life issues… but they are small in size.
I want yo see the rba deck, I kinda just know I’ll not be able to get these coils forever,but if the dual rba or single rba do well with titanium t.c. setups at loads of joules I’m interested I big ways .
Still debating getting 2 more crown tanks with rba bases .
Where’s the GREAT PRICE ON CROWN TANKS today? 
Here is a picture of the Crown deck with a build. You should check into the TFV4 also. IMO its a little better than the Crown.
I’ve totally forgot how many wraps on a 3.0 diameter got me to 0.12 but it pretty good at 70 joules, @ 70 i question whether I could try a high flavors % because it almost dilutes the flavor it so much Vaper.
I’m itching to see the dual coil RBA section for the TFV4 , I font recall seeing a dual coil rba?
So if ya get a pic of tfv4 rba dual build I’d like to check that out.
I’m unsure why at this low resistance I’d need dual coil but I’d like to see.
Click the link on my last post… its the bottom 5 pictures.
Are any of those pics the Tfv4 (dual coil rba)?
Click the link on my last post… its the bottom 5 pictures.
I am a still fairly new to the forum and have never posted to this thread before but here goes…I am expecting some vape mail today from Wizard Labs. He sent it out on Saturday so I should be here today! I hope…
I am getting the usual pg and vg along with some new flavors…any comments on the new flavors I am getting?
Orange Cream - TFA
Koolada - TFA
Smooth - TFA
Hawaiian Drink - TFA
Kiwi Double - TFA
French Vanilla Crème - TFA
Juicy Peach - CAP
Sweet Strawberry - CAP
Super Sweet - CAP
Tutti Frutti - TFA
Can’t wait but not sure what to make. I didn’t get them with any certain recipes in mind, just got them to add to my collection of flavors, and because I wanted something new!
That’s a good list. I noticed you’re following a trends that a lot of new mixers follow. Don’t overload yourself on TPA, Cap and FW flavors. As you become more experienced you will more than likely want stronger more true flavors. It won’t hurt to look at Flavourart, Inawera and Flavorah flavors. They are slightly more expensive, but most use very low percentages and a lot of them are truer to what it should be. Overall you did well on your list though.
When you have time peruse this subforum and you may see more flavoring ideas…
Arrg my order from ECX has been chillin in them duties for 10 days now… my order from canadian vendor that i purchased friday is gonna arrive faster. Lesson learned, (still i could not pass from that 120ml/1.66 i guess thats the price to pay)
It has arrived. Now to see what’s it’s all about. The tank is impressive, hopefully this will be equally impressive.
Welcome to the club 
I dont know if they interested you at all but they make a really nice wrap for this big boy, that makes the grip even better. I haven’t used it yet but @ffrank just bought one and showed me pics and it looks great
http://www.jwraps.com/
I had them before. They got old fast. They didn’t look as good as the photos.
Yeah I can understand that…for me it was more about the textured grip that interested me. I may give it a shot
This is @ffrank’s pic of it
I posted a link to 3m somewhere and you can get free samples of some really cool wraps…I’ll see if I can’t re-post it I’ve gotta find it…
Thanks man…I dont want colors and stuff, I’m not about that. I really dig the one in the above picture, because of the woven material that adds a nice grip to it. I was never the type of person to get colorful wraps and stuff for my phones, etc (not that there’s anything wrong with the people who do) I just think that one makes sense and it looks good too