Just bought 2 different Sig30 w for fun!!!
1 Like
I got my wraps in today and dressed my mods. Sig 100w and 150w. I think they came out nice. 
7 Likes
Now let’s see how they perform!!!
5 Likes
hope This thing works better than the last one
7 Likes
These sig 30’s r perfect for my kanger mini and atlantis!!! Free up my sig 150 and ipv 70 for my rebuildables!!!
1 Like
Vape Mail Friday.
Nothing as exciting as new mods but for now some new/replenish flavours.
Next month should see me ordering my Istick50w maybe a couple more RDA’s along with an RTA, some Kanthal and a coil tool.
J
5 Likes
I’m on a vanilla custard v2 kick right now …it’s delicious !
2 Likes
I’m new here… no DIY base/flavorings but… I’m waiting on these:
KangerTech SUBTANK Mini
OCC Coil Heads (0.5ohms) x5
Replacement Glass
P4Y iPV Mini V2
Samsung 25R 18650 batteries x2
0.32mm (28G) Kanthal Wire 50m
Ohm Meter
Muji Cotton
Cutting Pliers
Stainless Steel Thrum Scissors
Coil Winding Jig Tool
Torch Lighter
POM Drip tip
Drippers
Plastic bottles (30ml-50ml)
I also ordered some juice from GoodLifeVapor (6mg 50/50):
Cozmic Crunch 50ml
Beach Bonfire 30ml
Baja Breeze 30ml
So I’m just sitting here… waiting patiently 
6 Likes
These came in today. 
Gonna whip up a big batch of something tonight.
7 Likes
Just wanted to let you know that I tried their Pomegranate and really have not been able to get any recipe to taste good using it thus far. As we all know sometimes it’s just a matter of finding what to mix with a flavor, or just what amounts to use. I did realize it should not be used as a base flavor and should be used in very small quantities. I also realized I had never tasted Pomegranate that tasted like this flavor does. That being said, I hope you have better luck than I did with TFA Pomegranate…
All the rest looks perfectly vapable to me! Someone really likes Custard and Blueberry!
4 Likes
When I started DIY all the flavors I order were 10-30 ml bottles just build my inventory. Once I need to reorder I’m ordering the 4oz bottles and refilling the small bottles. I did get some use with the pom and it was getting low so I ordered the large bottle. I do hope I get more use from it though. Thanx for your input… I do like it with some melons though, in small amounts. I use it in this recipe which is good right away but changes after a month so now I’m making just small batches and vape it quick (with in a couple weeks). I’m testing a fruitstone base to see how it holds up, so I can make it quick.
1 Like
Whoo hoooo!
7 Likes
Haaaaappy! I bet you’ll mix up about 10 batches today!
1 Like
I have on order:
MVS
YD-GOB1 Goblin V2 Rebuildable Tank Atomizer 1 $28.85
There seem to be a lot of hype about this tank, so I figure what the heck. 
Also saw an interesting post about this rda so I’m gonna try this 1 too.
MFS
HAZE-RDA-SS-CLONE-VAPE $22.95 Ordered: 1Shipped: 1 $22.95
1 Like
Your posts make me wanna be single again . My wife is already on me about buying what I have …I’m one purchase away from being cut off for an extended period of time ! For now I will live vicariously through your vape mail !
9 Likes
Got this in 2 days with 1st class postage. Not bad at all MFS. I guess I’ll get this thing rigged up.
3 Likes
Give us a review when you’re done!
2 Likes
Well I never done a review, but I’ll give it a shot.
It comes neatly packed in nice black box with the logo in red on the box, (Pictured in my previous post). Inside the box I have the RBA, 2 top caps, 1 with a wide bore drip and the other is 510 threaded. Also in the box is a small screwdriver, 2 small coils and a little silica wick, but it has no extra O-rings or extra screws. The RBA itself looks nicely machined, no signs of machine oil (but I washed and dried it anyway). I had some Tiger Wire lying around so I made a dual coil, 10 wraps per, twisted 24g 316L and 9mm ribbon wire on a 2mm screwdriver. I mounted the coil… which was very easy. The deck has a 3 post 4 hole design with 1.8mm holes. I checked the ohms, it came out at .15 ohms. Loaded it on my Sig 150, gave it a few fires and pinches. I wicked it with the Ko Gen Doh organic cotton. I used one of my own eliquid creations Sorta Tropic which I’m still developing. I put on the wide bore top cap and set the watts at 50w and gave it a crank. It was a good hit but I had the air wide open. I set air to 1 partial air opening on each side and tried it again. It hits real well. Good flavor and massive vapor production. It seems to be worth the price, time will tell, but I like this RBA. Easy to build on, 2 top caps , 3 post 4 hole design and massive airflow. She’s a keeper. The only drawback for me is that I’d like see it with Allen screws instead of Phillip heads and a couple extra O-rings. In the MFS reviews 1 person said that he bought 2 of these and they both leaked. No leaking issues for me so far. I’d give it an 8 out of 10. I hope you find this helpful. And remember “Smoking is Dead, Vaping is the Future”.
6 Likes
Nice review! Makes me want to get one. Enjoy!
2 Likes
Did another VAPE DRIVE today and picked up a couple new items
Details:
0.69″ OLED display screen show wattage, voltage, resistance, battery level
Variable wattage: Can be adjustable from 7-35W (in 0.1W increment)
Resistance: 0.2-3 Ohm
Input: 5V/1000mA
510 thread connection
Floating 510 center pin
Side mounted firing button
Houses single 18650 battery (battery sold separately)
Logo prints
As you can see this box mod can be used for subohm application. We found it to be easy to use. Has a five click button lock. Good feel in the hand and good looking. Downside, can only be shut down by battery removal. Up/Down buttons MAY BE in a position that could be easily changed by accident. Time and use will be the judge of that.
Tobeca (Ohm Nation) Turbo RDA
Said to actually create larger clouds due to the ability to run hotter voltage since the turbine cools the unit a bit. Downside. it sounds like a dentist’s drill hacking away at someone tooth. Do not use this RDA around the general public, we just don’t need any more bad publicity. .
5 Likes