Slacker 
8 Likes
Sob! I knowā¦never live this down!!
7 Likes
I could really use that. Had a huge oak taken down last fall and am slowily splitting it via chainsaw, maul, and wedge.
8 Likes
Glad you bought those up, to keep them out of the hands of our innocent youth!
10 Likes
That happened to me once, had to consume 3 bottles of Mothers Milk and place a donation into the tip jar at my local vape shopā¦still shake my head, how could I
8 Likes
#notmyfault since @SmilingOgre showed me the way, this Dovpo Riva is one of the most compact DNA250C mods and is hella comfortable to hold.
It is said that if you donāt follow the wisdom of an Ogre, your pretty much lunch, had too
14 Likes
Honestly laughed out loud. Super glad you like it. Over here too!
12 Likes
I put in new silicone clad wires. You could reuse the Grus wires but you will have to replace the positive battery wire because the DNA board has the contacts on the bottm edge and the Grus has them about halfway down the edge and would be too short. I just bought a pack of assorted wires from amazon. I would recommend that you go with the original gauges that were on the Grus as anything larger will be a tight fight and a PITA to work with. I believe Evolv specs them a gauge higher on the preferred side but the next step down is OK per Evolve.
Hereās the wire pack I ordered. WAY more than you would need, but why not have some around for future projects?
https://www.amazon.com/gp/product/B075L46C5H/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
I happened to have some of this to help hold the top and bottom edges of the screen in place:
https://www.amazon.com/Mil-Kapton-Tape-Polyimide-Master/dp/B01LZRMJVR/ref=sr_1_9?dchild=1&keywords=kapton+tape&qid=1616795864&s=hi&sr=1-9
and also had some of this arounf to hold the screen down in the holder
https://www.amazon.com/GENNEL-Double-Strong-Adhesive-CellMobilePhone/dp/B06Y2YHWT9/ref=sr_1_30?dchild=1&keywords=double+sided+tape+tape&qid=1616795999&s=hi&sr=1-30
Be careful when testing the fit of the screen onto the holder. I pushed too hard and effed up the screen. Had to order a replacement.
Good luck!
11 Likes
Hehe, you got me beat @scifoc. Iād have tried that method, probably got mine done in 2023.
9 Likes
well shit, i aināt spendān $40, to get $.50 worth of stuff to do this. its not āthatā worth it, to me. i will chew on this. Thanx 
8 Likes
Iām waiting brother. Canāt wait. 
6 Likes
if you could find 1 ft of 16g red/black silicone wire that would be all you would need and have a bit left over. You could also reuse the wires from the Grus board except for the one battery cable. The Kapton tape isnāt really needed, but the double sided tape would be. you would only need a very small amount. Maybe try a hardware store for a tiny spool? I just listed what I found on Amazon as reference only. Just make sure the tape isnāt the foam type. Too thick.
9 Likes
Have you ever looked under the daily deals thread at wet vapes?
6 Likes
Thatās the site that out of the blue is filling up my spam daily. Never heard of them before.
6 Likes
Man what a classy mod.
I mustāve missed ogre posting about it here, and that sucks! For I know heās another one with great taste!
8 Likes
Just a little bit of this and a little bit of that.
Getting vape mail is always exciting. Whatās even more exciting is getting juice or one shots from other membersā¦ This (black voodoo ) from Ms. Smokey blue is freakin fantastic .Its a cross between mountain dew, sprite and cheery coke. She definitely has some wicked mixing skillsā¦
13 Likes
Thanks brother, me and classy donāt usually go in the same sentence 
It wasnāt even on my radar which is rare for a DNA mod but so far I really like it.
10 Likes