Today I will strongly recommend you two best pod system vape kits: newest Aspire Breeze NXT Vape and Vaporesso Renova Zero, both of which are on hot sale in Vapesourcing online vape store. Now let’s make a short comparison between them, so which one do you like better?
- Aspire Breeze NXT Pod Kit
Aspire Breeze NXT Pod System comes with a 1000mAh rechargeable battery with 5.4ml vape juice capacity. It has the adjustable airflow control ring with the single firing button to activate the firing mechanism. Moreover, this button is also geared with a draw-activated mechanism. Within the refillable pod, a 0.8ohm KA Mesh coil is installed in the bottom, designed for regular e-juice or nicotine salt vaping.
Buy one now: https://vapesourcing.com/aspire-breeze-nxt-kit.html.
- Vaporesso Renova Zero Pod Kit
Vaporesso Renova Zero Pod Vape features a built-in 650mah battery is built in and 1.6ml juice capacity. With the advanced OMNI Board Mini, it allows for three different levels of output power, featuring a colorful LED indicator light to show you the battery level clearly The Vaporesso Zero Pod utilizes the unique CCELL coil built-in that gives you better taste and optimizes high nicotine satisfaction than general cotton coil.
Order one now: https://vapesourcing.com/vaporesso-renova-zero-pod-system-kit-650mah.html.
$18.69 for Smok Novo 2 & $19.69 for Smok Trinity Alpha
Are you a big fan of Smok? If so, I think you will be very excited when you see this post. There are two hot products from Smok in discount now, the Smok Novo 2 and Smok Trinity Alpha. If you are interested in them, you should seize this opportunity because our discount time is limited.
- Smok Novo 2 - Promotion Price: $18.69
Features:
● Upgraded version of Novo with optimized details.
● Smaller than palm, can be easily put into pocket or bag.
● Same design style with Novo, curved body for a comfortable grip.
● Whistle-shaped mouthpiece, perfectly fits the lips.
● Built-in 800mAh battery, can be used for about three days after fully charged. (200 puffs per day).
● Intuitive draw-activated firing mechanism.
● Newly added air-intake grooves on both sides, bring more air in.
● Improved LED indicator, clearly shows the battery conditions.
● Redesigned pod housing base, prevents auto-firing and spit-back.
Purchase link: https://vapesourcing.com/smok-novo-2-kit.html
-
Smok Trinity Alpha - Promotion Price: $19.69
Features:
● Three power modes: soft, normal, and hard.
● Three indicator lights shows the battery level.
● 1000mAh large battery, can be charged via the USB port.
● Innovative push-up-type filling design, makes refill easier.
● Unique lock button for pod fixation.
● Two airflow channels, brings more air in and produces huge vapor.
● Compatible with Nord Regular or Nord Ceramic coils.
● Multiple protections, avoids potential risks.
Purchase link: https://vapesourcing.com/smok-trinity-alpha-kit.html
Hi, dear vaping fans. Have you ever heard that Aspire Odan Tank is with Honeycomb 810 resin drip tips? The tanks have a drip tip, top hardware, chimney, glass tube, coil and a base hardware.
Parameters
Size: 56mm * 28mm
E-Liquid Capacity: 7ml(Standard)/5ml(Diamond)/2ml(TPD Version)
Coil Type: 0.2ohm Mesh Coil (50-60W), 0.3ohm Mesh Coil (35-45W)
Thread: 510 Connection
Fill: Easy top filling
Drip Tip: 810 Honeycomb Resin Drip Tip
Material: Stainless Steel Construction, Polished PVD Coating
Aspire Odan best vape tank 2019 has a very nice and elegant look, 810 honeycomb resin drip tip, stylish design with diamond cut technology, high polish PVD coating, super easy top-fill, enormous vapor and flavor production, super-efficient wicking materials, 80% linen fiber + 20% organic cotton, excellent low e-liquid consumption ingenious self sealing coil housing.
Well, the appearance of the drip tip seems like composed of fish or reptile scales. Pretty cool, isn’t it? If you’re looking for a stylish and robust vaping tank, then the Aspire Odan Tank for you it suitable and you can click here in Vapesourcing online store.
Other products you may like:
falcon king
aspire breeze nxt
Guys, here comes another new pod system kit named Hotcig Koi Kit, and the elegant look is more like a beautiful piece of art that is a feast for the eyes. So you must be attracted by this kind of pod vape kit. Now let’s get more information about this pod vape kit below.
What’s the difference from the regular pod vape kits is that the cartridge and the battery body are locked together with grooved structures. This pod vape is with the 1000mAh built-in battery for a long time vaping. Its surface material is made of zinc alloy and plastic, so it looks so durable. KOI is easy to use and your first choice for business events, travel lifestyle and leisure time. So it can be conveniently placed in your pocket, backpack, wallet. There are 2 types of coils: 1.0ohm coil and 1.5ohmcoil to meet your different demand for vaping. Besides, The indicator light is with 3 colors to guide you to the tour of tastes.
Parameters
Dimensions: 89 * 39 * 14.2mm
Battery Capacity: built-in 1000mAh
Resistance: 1.0ohm/1.5ohm
Cartridge capacity: 2ml
Working Voltage: 3.2-4.2V
Cartridge Life: 3-5 Refills
Material: Zinc Alloy+Food Grade PC
Output Voltage: Three adjustable constant voltage output
Operating mode: POWER
Protection: from low/high resistance, from overheating, from short circuit, from overcharge / over-discharge
Connector Type: Magnetic
Screen/diagonal: NO
Micro-USB port/charging: YES
Color: Koi-9, Koi-7, Koi-5, Koi-11
Buy one now: https://vapesourcing.com/hotcig-koi-kit.html.
Labor Day Discount - 12% off for All Products!
In order to meet China’s Labor Day, vapesourcing now offers a 12% discount for all products (discounted products excluded). The coupon code is “Labor12”, and the deadline is September 5th. Time is limited, take the opportunity to snap up your favorite products!
Shop now: https://vapesourcing.com
Hi my vapors. You know the original Preco One kit is a simple pen style starter kit for a better vaping. Now VZone Preco 2 Solo Kit is the follow up to the original Preco One kit and also includes the new range of Preco disposable tanks. Let’s have a brief preview.
Parameters
Vzone Preco 2 Solo Mod
Dimension: 24 * 80 mm
Battery Capacity: 1800mAh built-in battery
USB: 5V/1.5A
Color: Black, SS, Blue, Rainbow
In my impression, VZone were the first brand to start the trend of the disposable tanks. Basically they released the Preco tank, a DTL (Direct to Lung) tank with a mesh coil. You can refill the tank, but when the coil dies on you, the tank will be discarded. This seems to be really popular, and people really like this ease of use - almost like a pod, but on a larger scale.
Then VZone vape pen kits created a mod to pair with the Preco tank called the Preco One mod and made a kit. This was a simple battery with a fire button and no adjustment. The mod in the kit is the Preco 2 Solo which has an internal 1800mAh battery and a single fire button to operate.
If you interested in this creation for Preco Tank, why not try it in Vape Shop Online E-Cigarette & E-liquid Best For Sale and you may like this fat pen kit guys.
Related products you may prefer:
drag 2 kit
drag 2 mod
Guys, you must be excited that Smok has released their newest mod pod kit named SMOK Fetch, and you must live this charming pod vape because the panels on both sides feature 2.5D arc edge glass as the glass sits on top of the chassis for a seamless edge and a notable 3D effect, featuring a sleek glass accented body.
The Fetch Pod System features an 1200mAh internal battery capacity and has variable wattage support up to 40W. What’s more, This pod vape kit is dustproof and waterproof, so users can use it safely and easily in a dusty or rainy environment while easier to clean. The cartridges can hod up to 3.7mL of e-liquid with a bottom refill system similar to other Smok pod kits. The Fetch Kit utilizes SMOK’s new RPM coil series, an enlarged version of the SMOK Nord Coil series that focuses on the use of Mesh heating elements to offer fantastic flavor and optimization for either mouth-to-lung or direct-to-lung vaping.
Parameters
Dimensions: 76mm * 42.8mm * 18.4mm
Battery Capacity: 1200mAh
E-Liquid Capacity: 3.7ml
Output Voltage: 0.5V - 4.1V
Output Wattage: 5W - 40W
Charging: 1.2A Max
Resistance Range: 0.3ohm - 2.5ohm
Firing Time: 0.001s
Airflow: Top Airflow
Screen: 0.96" TFT Screen
Filling: bottom refill system
Charging Port: Micro USB Charging
Color: Purple, Blue
Buy one now: https://vapesourcing.com/smok-fetch-kit.html.
You may also want this below:
Purchase Lyra Lost Vape
Smok MAG P3 Kit Preview: Best Mod Kit for Choice
Guys, here comes another new Smok Vape kit named MAG P3 Kit, which is the new member of the Mag family. It features a familiar pistol grip form factor, so do you like this kind of style?
This new P3 kit forgoes the use of the magazine-style battery compartment in favor of a new hinged door to accommodate the new waterproof design. It’s by external dual 18650 batteries and a smart IQ-M Chipset, so Mag P3 can fire up to the max output of 230W with 0.001s flash firing speed. It comes with a super responsive 1.9" HD touch screen to offer useful data information for easier operation. MAG P3 continues the classic MAG series, adding more stunning features, such as waterproof, dustproof and shockproof. The tank has a remarkable 9ml TFV16 tank, preinstalled with a new TFV16 Conical Mesh 0.2ohm coil powered by nexMesh Technology.
Parameters:
MAG P3 Mod
Size: 72.3 * 36 * 91.6mm
Weight: 251.5g
Standby Current: <400uA
Power Range: 1W-230W(VW) / 10-230W(TC)
Input Voltage: 6.4V-8.4V
Output Voltage: 0.5V-8.2V
Charging Voltage: 5V
Charging Current: 1.8A
Firing Speed: 0.001s
Resistance Range: 0.1ohm-2.5ohm(VW) / 0.05ohm-2ohm(TC)
Screen: 1.9" HD Touch Screen
Tempurature Range: 200F - 600F / 100C - 315C
TFV16 Tank
Size: 32 * 64.5mm
Weight: 94g
Material: Stainless Steel
Capacity: 9ml
Tread: 510
TFV-Mini V2 Tank
Size: 25.4 * 54mm
Weight: 65g
Material: Stainless Steel
Capacity: 2ml
Tread: 510
Order one now: https://vapesourcing.com/smok-mag-p3-kit.html
Demon Killer Puck Kit Preview - compatible with Jull/Jbox cartridge
Demon Killer Puck Kit has nice texture and portable to have it at anywhere. It presents the modern day portable vape system, featuring a discrete form factor with 400mAh built-in battery.
Main Features:
-
Compatible with Jul/Jbox cartridge
-
400mah battery for long time vaping
-
Small and compact, Layard design
-
Zinc alloy material, great texture
Demon Killer Puck Pod Vape Kit is made of Zinc alloy material. It is visually fancy and compact being equipped with a battery of 400mAh. The most important is Puck best vape mod compatible with Jul/Jbox cartridge.
If you like this new pod vape kit, you can choose it and in Vapesourcing online store to start your perfect vaping.
Other products you may prefer:
Lost Vape Orion Plus DNA
smok species kit
CoilArt T-Box Pod System - Fits The Widest Range of Cartridges On The Market
CoilArt T-Box Pod is the standard edition for Juul Pod, decorated with vibrant and modern color designs and powered by 900mAh built-in battery. It comes with preheat function which allows the device to heat up quickly with simply pressing twice of the fire button. A twist style voltage adjustment knob is also built at the bottom of the device, allowing you to adjust the voltage from 2.0V to 4.8V for your choices. Featuring a hybrid system, T-Box is perfect for Nic Salts or CBD. With the Sure Fit Pod Technology, it is suitable for any Juul compatible pod. Unique magnetic connection with adapter makes the device more outstanding!
Parameters:
Dimension: 64 * 44 * 15mm
Battery Capacity: 900mAh built-in battery
Output Voltage: 2.0 - 4.2V
Atomizer Resistance: 1.0 - 2.5ohm
Charging Port: Micro USB port
Thread: 510 connection
Color: Streetscape, Watercolor, Black, White, Blue
You may also like:
smok mag p3
smok fetch
Desire Cut Squonk Box Mod Clearance Special - $19.99
Friends, have you been waiting for the discount of Desire Cut Squonk Mod? Here the opportunity comes! Vapesourcing website now offers a 29% discount on the box mod, and the discounted price is only $19.99! Desire Cut Squonk is a product of Desire’s collaboration with Project Sub-Ohm, with a maximum output of 108W, featuring a full temperature control suite and status breathing display light. No hesitation! Just take this mod home, it will keep you chucking clouds out of your favorite RDA all day long!
Features:
● Compatible with single 27100/18650 battery
● Powered by the CUT chip
● Maximum output of 108W
● Bottom feeding design
● 7.0ml capacity squonk bottle
● 0.96 inch OLED display screen
● State breathing display light
● Magnetic battery door cover
● Stainless steel plated 510 threading and firing pin
● Multiple protection mechanisms
● Ni200, Titanium, and SS316 Stainless Steel 316, TCR temperature control
● PMG mode - temperature coefficent of resistance mode
Purchase link: https://vapesourcing.com/desire-cut-mod.html
First Look | 400mAh Gippro GP6 Pod System Kit
Hey guys. Today I’m first gonna introduce the Gippro GP6 Kit that is a handy pod system with prefilled pods. It would be a good choice if you’re tired of refilling e-juice for your devices. Ok, let’s dive in.
Gippro GP6 abandoned the traditional pen design but used the long oval flat vape style to increase product recognition. The front is printed with Gippro’s product LOGO, as well as a round LED sensor light, which is controlled by the air switch to determine whether it is gradually brightening or fading. Powering the GP6 is a built-in 400mAh battery, this is enough for daily use of ordinary users. The battery can be fully charged in about 2 hours, and will not affect the user’s use too much.
As for the pods, they are prefilled with 2ml e-juice and available in 4 flavors. Included in the package are a fresh mint pod and a passionate mango pod, the simulated tobacco, and iced mung bean pods are sold separately. These pods are also divided into 0mg/ml, 30mg/ml, and 50mg/ml nicotine salt content. According to the official description, the 0mg butyl salt content can also give people a little satisfaction. The nozzle inlet is large, indicating that this small cigarette is not suitable for smallmouth feeding, it is more suitable for fast smoking, and the amount of smoke will also increase. In addition to the bottom two intake holes, there are also air intake holes on both sides of the joint between the cartridge and the shaft. Anyway, the Gippro GP6 is worth a shot.
Where to buy: https://vapesourcing.com/gippro-gp6.html
Parameters
Dimensions: 81 mm×25.5mm×12mm
Battery capacity: 400mAh
Charging time: 2 hours
Battery voltage: 3.7V
Atomizer capacity: 2.0 ml
Ingredients: Natural plant glycerin / propylene glycol / flavor
You may also like: uwell yearn review
What Are The Selling Points Of Starss Romeo Pod System Kit?
Guys, this time we’ll be covering the brand new Starss Romeo Kit. It features an ergonomic body with a curved surface, which makes it very comfortable to hold in hand. Well, here we go.
Starss Romeo adopts advanced in-mold transfer technology to achieve a superior appearance. Powered by a built-in 1200mAh lithium ion battery, it can fire from 8-25W and supports 3 adjustable output levels. Press the button 3 times quickly to adjust the output voltage, and the LED indicator light around the fire button will show the voltage level in 3 colors, green for 3.0V, blue for 3.3V, and white for 3.5V. The battery can be fully charged in 1.5-2 hours via the USB port right under the device.
As for the pod, it can hold up to 2ml of your favorite e-juice and can be easily refilled via a top filling structure. Moreover, it adopts top intake system ensures sealing of the cartridge bottom and avoids leaking. Adjustable airflow enables users to adjust the airflow as needed. Heating elements included in the package are a prefilled 0.6ohm Mesh Coil and a spare 1.4ohm Regular Cotton Coil, both of them can be replaced effortlessly thanks to the PNP design. Using the latest flat mesh heating technology, the coils provide massive clouds comparable to that of mods.
Where to buy: https://vapesourcing.com/starss-romeo-kit.html
Parameters
Dimensions: 46 * 20 * 105mm
Material of Cartridge: PCTG
Material of Cover: Zinc Alloy
Weight: 114g
Resistance: 0.6ohm
Charging Port: Micro USB
Working Voltage: 3.0~3.5V
Cartridge capacity: 2.0ml
Battery Capacity: 1200mAh
Maximum output current: 7A
Output voltage range: 3.0~3.5V
Input voltage range: 4.5~5.5V
Charging current: Standard 1A
Wattage range: 8~25W
Charging Time: 1.5~2.0H
You may also like: voopoo find s trio cena
New Release | Augvape Druga Foxy Box Mod 150W
Hey guys. Today let’s first look at the Augvape Druga Foxy Mod. You shouldn’t miss it if you are looking for a compact, solid and aesthetic box mod. Ok, here we go!
Augvape Druga Foxy Mod presents a stunning zinc alloy structure integrated with a 150W chipset optimized for VW and VV outputs. At first glance, you can see its exquisite IML panels. The magnetic back panel is the battery door while the magnetic matching front panel hides function buttons interface in exchange for a sleeker look. Remove the front panel you’ll be able to adjust the power or swap modes, meaning that the buttons can’t be accidentally hit while the mod is in your pocket. Removing the front panel also shows you the front of the metal body which has the Ohm’s law pie chart on it. Outside of that, the Druga Foxy features a small, basic screen which can be seen with the panel on as well. It’s pretty bright too but doesn’t look very bright with the front panel on.
The Druga Foxy is also one of the first pioneering vapes with a patented “quick release” feature, allowing 510 atomizers to be removed with a simple button press and twist. The “quick release” button is very simple to use: just press the button, give your atomizer a small quarter turn, and release the button to secure it in place. To remove the atomizer, give it a quarter turn while keeping the button pressed and it will pop off. The 510 platform itself is centered and can fit 26mm atomizers flush with no overhang, so more than good enough there. At last, there is no USB port on the Druga Foxy, so you have to take out the batteries to charge them up. Although a bit troublesome, the batteries can cool down effectively.
Where to buy: https://vapesourcing.com/augvape-druga-foxy-mod.html
Parameters
Material: Zinc Alloy
Battery Compatible: 2*18650 (Not Included)
Output Power: 5-150W
Output Voltage Range: 0.5-6.5V
Resistance Wire: 0.05-3.0ohm
Temperature Range: 200℉-600℉/100℃-315℃
Thread Type: 510
Color：Blue, Black Red, Gold Resin, Gunmetal, Rainbow, Silver
You may also like: voopoo vinci cena
Wizman Puff Boy Box Mod - An Ode to The 90’s Gaming Console
With retro design, Wizman Puff Boy Mod enters the public’s sight with a fun and high-performance features. It adopts unique body design of classic gaming device and powered by dual 18650 batteries to achieve max output of 200W. Weighing only 170g, it is smaller and lighter than the famous Japanese console.
It features a 1.3 inch full-color screen with a 8-bit styled user interface, totally functional buttons in the shape of a cross, users options between 12 presets and 3 distinct power modes, and a temperature control suite. In addition, it has a power output range of 10.0 to 200.0 watts with the ability to fine tune to the tenth of a watt.
Parameters:
Size: 53 * 33 * 88mm
Battery: 2 × 18650 (not include)
Output Wattage: 10 - 200W
Coil Resistance Range: 0.1 - 3.0ohms
Voltage Range: 1.0 - 8.0 volts
Thread: 510
Display: 1.3 inch full-color OLED screen
Material: PCTG
More information you can refer https://vapesourcing.com/wizman-puff-boy-mod.html
You may also want to view:
drag 2 kit for sale
New Launch | Think Vape Thor Box Mod 200W
Guys, good day! This time I’m gonna introduce the Think Vape Thor Mod. You may like it if you are looking for a decent box mod around $30. Well, let’s dive in.
Think Vape Thor is a well-crafted box mod that features a graffiti themed appearance. On the front of the mod, there is a 0.96" OLED screen that has a vertical menu with white font on a black background. The menu includes vape data such as two battery bars, atomizer resistance, current voltage, current power/temperature, current mode and more. Above the screen, you can see an oversized fire button that is said to have been made to ensure comfortable operation. Beneath the screen are two adjustment buttons and a USB charging port.
Powering the device are dual 18650 batteries, and you will find the mod quite capable thanks to an updated ST200 chipboard. It can fire from 5-200W, has a very low resistance capability of 0.05ohm and works with temperature control up to 600 Fahrenheit with all heating elements including a TCR setting. There’s also a bypass mode to use the device as a mechanical mod. Anyway, the Thor Mod is definitely worth a shot!
Where to buy: https://vapesourcing.com/think-vape-thor-mod.html
Parameters
Material: ABS
Size: 88.5 * 46 * 32mm
Screen: 0.96" OLED Screen
Wattage Range: 5W-200W
Temperature Range: 93℃-315℃/200℉-600℉
Working Modes: VW/VT(Ni/Ti/SS)/TCR/Bypass
Resistance Range: 0.05-3.5ohm
Battery: 2 x 18650 Battery (Not included)
Thread: 510 thread
You may also like: uwell amulet near me
$17.69 for Sense Orbit & $18.99 for Sense Orbit TF
The promotion of two hot items from Sense - Sense Orbit Pod and Sense Orbit TF Pod is coming! They are now under 56% and 59% discounts respectively on vapesourcing online vape shop. Are you excited to hear this? If so, this time is the best chance.
- Sense Orbit Pod - Discounted Price: $17.69
Features:
● Ultra portable design for comfortable hand feeling.
● Advanced soft/normal/strong working modes.
● Two different coils for both DL and MTL vaping.
● LED battery life indicator light.
● Button-triggered system.
● Internal 1100mAh battery & 2.5ml capacity e-juice.
● Multiple protections for safe vaping.
Purchase link: https://vapesourcing.com/sense-orbit-kit.html
-
Sense Orbit TF Pod - Discounted Price: $18.99
Features:
● All-in-one design.
● Zinc-alloy and PC chassis construction.
● Integrated 1100mAh rechargeable battery.
● 3 power level switchable - soft, normal, strong.
● LED power level indicator light.
● Juice viewing window.
● Rotating top fill system.
● Compatible with Mesh coil and Kanthal coil.
● 10s cut-off protection.
Purchase link: https://vapesourcing.com/sense-orbit-tf-kit.html
What Are The Advantages Of Augvape VTEC1.8 Box Mod?
Hey guys. Today let’s first look at the Augvape VTEC1.8 Mod. It’s no doubt a must-have if you are looking for a cheap yet high-performance box mod. Ok, here we go!
Augvape VTEC1.8 depicted its zinc casing in the form of a smaller Honda Civic engine. Powered by two high amp 18650 batteries, it can fire from 5-220W and supports 4 working modes including Auto, Bypass, VV, and V Mode. On the front, you will see a unique adjustment wheel which is used when wanting to adjust the power level. The firing button is somewhat hidden too, towards the top of the device, making it not only stealthy but very comfortable to vape with. Also, on the front is where the 0.96" OLED display screen and USB charging port are located. At the bottom is where the battery door is, simply slide it open, insert your batteries, and it’ll lock back into place securely.
Another great feature to the VTEC1.8 Mod is the centered 510 connection. It’s spring-loaded, so there’s no need to make any manual adjustments, but the best part is, your larger atomizers will look great when attached. Lastly, the backside of this device was decorated with the finest leather strip, adding more to comfort. Anyway, the VTEC1.8 Mod definitely an excellent pickup as a backup mod or as your primary beater to take with you all day.
Where to buy: https://vapesourcing.com/augvape-vtec-mod.html
Parameters
Size: 87.5 * 45 * 29.2mm
Battery: Dual 18650
Material: Zinc Alloy
Standby Current: < 500 QA
Input Voltage: 0.5 - 7.2V
Charging Current: 1.2A
Charging Port: Mirco USB
Resistance Range: 0.05 - 3.0ohms
Display: 0.96" OLED
Thread: 510 threading connection
Four Working Modes: Auto, Bypass, VV Mode, V Mode
Color: Blue, Black, Red
You may also like: mag p3 price
Smok Species TC Box Mod - A Combination of Beauty and Strength
Smok Species Mod is the successor of the world famous Alien, imposing a truly futuristic design with an upscale touch through angular lines and now-iconic cobra resin stained panel. It features a 1.45 inch colorful touch screen with an upgraded user interface, and is powered by dual 18650 batteries to offer maximum output of 230W, along with temperature control mode, VW mode and memory mode.
Species comes with 510 threaded connection, which is perfectly compatible with Smok TFV8 Baby V2 Tank. With tanks/RDAs getting wider in diameter, Smok has moved the 510 threaded connection of Species to the center to give your setup a better, more symmetrical look. It maintains the powerful performance chipset Smok have come to known for, with preheat wattage values and full temperature suite such as TCR adjustments.
Parameters:
Size: 82.1 × 49mm × 30.6mm
Weight: 155g
Battery: 2 × 18650 battery (not included)
Power Range: 1W - 230W
Input Voltage: 6.4V - 8.4V
Output Voltage: 0.5V - 8.2V
Resistance Range: 0.1ohm - 2.5ohm (VW)/0.05ohm - 2ohm (TC)
Min Atomizer Resistance: 0.06ohm
Temperature Range: 200℉ - 600℉/100℃ - 315℃
Charging Voltage: 5V
Charging Current: 1.8A
Standby Current: ＜500uA
Micro USB Port: Charging/firmware upgrades
Thread: 510
Screen Display: Full color 1.45 inch OLED touch screen
Material: Zinc alloy
More information you can refer https://vapesourcing.com/smok-species-mod.html
Vapor Storm Trip TC Mod with Stylish Suitcase Appearance Design
As the smallest 200W high power mod with two 18650 batteries in the vape world, Vapor Storm Trip Mod brings a deep impression for us with its unique suitcase appearance design and a golden ratio of 0.618. Constructed of Aerometal and PC material and completely CNC process manufactured, it is stable and durable.
Featuring five kinds of working modes - power mode (VW), TC mode (NI200, TI01, SS316), TCR mode (M1, M2), bypass mode and curve mode (CCW), the Storm Trip can satisfy your different vaping needs. Adopting 0.91 inch OLED screen, it shows you the essential parameters you need and bring you convenient operation.
Parameters:
Size: 85 × 51 × 27mm
Material: Aerometal + PC
Battery: Two 18650 batteries (not include)
Voltage Range: 6.4V - 8.4V
Wattage Range: 5.0W - 200W
Current Range: Max 45A
Temperature Range: 100℃ - 315℃ (200℉ - 600℉)
Fast Balance Charging: DC 5V/1.5A
Continuous Smoking Time: 10s
Display: 0.91 inch OLED screen
Thread: 510
More information you can see https://vapesourcing.com/vapor-storm-trip-tc-mod.html
