Vapesourcing.com - The Latest Vape Devices & E-liquid

Vapesourcing · September 6, 2019, 9:09am

Latest Member From Aegis Family-Geekvape Aegis X Kit 200W

Guys, good day. It’s been quite a while since Geekvape launched the last vape mod kit. This time we’ll be covering the Geekvape Aegis X Kit which is Geekvape’s latest vape mod kit to date.

Geekvape Aegis X Kit represents the strong comeback of the Aegis series. Built with 6 high-grade materials, it will provide you with improved durability and user experience. Inheriting the main features of its predecessors, the Aegis X is still waterproof(IP67), shockproof and dustproof. Powering the device are two 18650 batteries, thanks to the new AS 2.0 Chipset, the kit can fire from 5-200W and supports 3 working modes including powerful, standard, and soft mode.

Moreover, the button positions on the side are optimized for single-hand operation. And this time, Geekvape introduces an oversized 2.4" OLED display screen to show the vaping information vividly. Included in the kit is the Cerberus sub ohm tank. With purchase, you will get two 0.2ohm Super Mesh X1 Coils from the package, one preinstalled and the other for spare. Besides, the tank is also compatible with other Super Mesh coils of Geekvape. Anyway, the Aegis X is worth a shot and worth every penny.

Where to buy: https://vapesourcing.com/geekvape-aegis-x-kit.html

Parameters
Size: 128.9 * 31.5 * 41.2mm
Input Voltage: 6.2-8.4V
Output Voltage: 0.1-12V
Resistance Range: 0.05-3ohm
Charger Specification: 5V/2A
Output Power: 5-200W
Temperature Control: 100-315℃/200-600℉
Battery: Dual 18650 Steel Shell Lithium Batteries
Tank Capacity: 5.5ml

You may also like: orion plus review

Vapesourcing · September 7, 2019, 3:07am

Quawins VSTICK Disposable Pod System - Satisfies Both Vaping Novices and Veterans Alike

With no buttons or switches, the Quawins VSTICK Pod is an all-in-one disposable vaping device that adopts non-rechargeable and non-refillable design to keep vaping going without chargers, spare e-juice, or extra batteries. It is equipped with a powerful 500mAh battery, 2.5ml prefilled e-juice and offers various flavors options. By the working of inhale activated system, you can just inhale for your on-the-go vaping.

In addition, VSTICK features an optional tube filter made of medical grade cotton, working with the narrow and long air channel to limit the leakage and condensation close to zero. Since the filter is detachable, there are two ways available for you to enjoy - with a filter and without a filter. If you choose not to install a filter, all the flavors offered by the Quawins VSTICK Pod will bring a richer taste.

Parameters:
● Dimensions: 102 × 16 × 16mm
● Weight: 27.7g
● Pod Capacity: 2.5ml
● Battery Capacity: 500mAh
● Nicotine Strength: 5%
● Flavors: Mango/Mint/Mung Bean/Tobacco/Coffee

More information you can see https://vapesourcing.com/quawins-vstick.html

Vapesourcing · September 7, 2019, 5:05am

Is Cthulhu Mulan MTL RDTA Worth Buying?

Hey guys. Today let’s first look at the Cthulhu Mulan MTL RDTA. It would be a good pick if you’re looking for a reliable atomizer for your squonk mods. Ok, here we go!

Cthulhu Mulan MTL RDTA’s name comes from the ancient Chinese poetry, commemorating a brave girl - Mulan. Built with 304 stainless steel, it can hold up to 2ml of e-juice and adapts to two completely different types of drip tips. On this RDTA, you can change airflow inserts(0.8mm, 1.4mm, 2.0mm) to adjust airflow without rebuilding the coil.

And the double chamber system of the top cap will dissipate heat fast. A new optimized small dome will bring you better flavor and throat hit. Moreover, the RDTA’s coil is near to the drip tip(comparison with RTA), that can bring the outstanding flavor. Of course, the main feature of the device is the deck with many of the usual racks for an MTL build. At last, the Cthulhu Mulan also comes with a BF pin.

Where to buy: https://vapesourcing.com/cthulhu-mulan-rdta.html

Parameters
Height: 33mm / 1.29 in (without drip tip)
Width: 22mm / 0.86 in
Capacity: 2ml
Type: Single Coil RDTA
Airflow Inserts: 0.8mm,1.4mm,2.0mm
Thread: 510 Thread
Drip Tip: 510
Material: 304 food-grade steel

You may also like: aspire breeze nxt cena

Vapesourcing · September 7, 2019, 6:44am

Vaporesso GEN Kit for $56.69

Here is the offer for Vaporesso GEN, which is priced at $56.69 now on our vape online store. Vaporesso Gen is a seemingly simple kit with a soft-touch finish and the elegant SKRR-S tank, but beneath the surface is a 220W powerhouse with an intelligent AXON chip as the operating brain, designed to give you maximum pleasure with both flavor and cloud performance.

Features:
● All-new Axon chipset
● Innovative pulse mode and smart TC mode
● Lightweight with powerful 220W output
● 2.5A fast charging system
● Improved secondary air flow distribution for richer flavor
● Easy top screw-up refill design
● Bullet-shaped coil preventing spit back
● Advanced QF coil with improved coil structure
● Widely compatible with GT coils
● 8ml large e-juice capacity

Purchase link: https://vapesourcing.com/vaporesso-gen-kit.html

Vapesourcing · September 7, 2019, 7:25am

First Look | Snowwolf Afeng Pod System Kit

Guys, good day! This time I’m gonna introduce a brand new pod mod vape named SnowWolf Afeng Kit. Differing from many pod system vapes powered by built-in batteries, this one adopts replaceable 18650 battery as the power source, very unique. In the following are more details.

SnowWolf Afeng Kit adopts the IML process, which makes the appearance fashionable and refined. And the curved body design based on the ergonomics gives you a more comfortable hand feeling. Powered by a 18650 battery, the Afeng has a perfect self-adjusting wattage range from 16-22W and the output is controlled by the revolutionary IFV smart chip. This chip can detect the installed coil to find the ideal wattage and output to balance the best flavor and coils lifespan.

Equipped with a 3mL refillable pod with a replaceable coil, the AFENG pod system uses 0.6ohm Wicked Coil but also can utilize WOCKET Xgrid coils in a plug ‘n’ play fashion. In addition, the pods feature a side fill system with a silicone stopper, preventing any nasty leaks that would water down the vaping experience.

Where to buy: https://vapesourcing.com/snowwolf-afeng-kit.html

Parameters
Mod
Size: 44.0mm(W) * 78.5mm(H) * 22.5mm(D)
Battery: Single 18650 battery
Power Output：16~22W
Input Voltage：3.2-4.2V
Resistance Range：0.30ohm-1.5ohm
Charging In terface：Type C
Charging Current：5V/1A

Pod
Capacity：3ml
Material：PCTG
Vaping Style：MTL & DTL
Airflow Style：Bottom
Pre-installed Coil：Wicked coil (0.6ohm)
Extra Coil：Wicked coil (0.6ohm)
PG/VG Suggested：All

You may also like: smok trinity alpha near me

Vapesourcing · September 9, 2019, 5:23am

Vandy Vape Pyro V3 RDTA - Advanced Airflow Intake System for Excellent Taste

Vandy Vape Pyro V3, the heir of the legendary Pyro RDTA series and the upgraded edition of the Pyro V2 RDTA, coming with 24mm diameter and 2ml e-juice capacity. It features advanced airflow intake system to could give you wonderful vaping experience and present excellent flavor taste. The postless build deck features vertical coil installation design, ensuring simple replacement. Designed with enhanced bottom airflow, it will deliver optimal flavor taste and satisfy your massive clouds demand. Besides, the optimized filling structure makes refilling become easier and reduces more waste.

Parameters:
Length: 37mm
Diameter: 24mm
Capacity: 2ml
Resistance: 0.33ohm
Color: SS, Matt Black, Rainbow, Gunmetal, Gold, Blue, Grey

More information you can see https://vapesourcing.com/vandy-vape-pyro-v3-rdta.html

Vapesourcing · September 9, 2019, 8:47am

VapeCige Nano Pod System Kit Matches with Your Different Temperament

VapeCige Nano Kit comes with various of options, varying in the panel material and frame color, to match with your temperament, dressing style and usage occasions. It integrated with a 950mAh high rate 15C battery with up to 40W power to give you long-lasting and pure steam, and 2ml capacity to change flavors as you wish.

It features 3 level watt, the red led is high watt, the blue led is middle watt, and the white led is low watt. There is a micro USB port for charging when the battery indicator turns red. What is as important as endurance is the taste. The adjustable top airflow system near the drip tip is effective to cool the drip tip, enhances the flavor and optimizes the taste, reassuring your doubts.

Parameters:
Dimensions: 92 × 37 × 14.5mm
Material: Zinc Alloy
Coil: SS316, 0.25/0.5/1.0Ω
Battery: 950mAh high rate 15C
Cartridge Capacity: 2ml
Output Power: 30/40W
Operating Mode: Power
Pod: PETG (food grade)
Protection: low/high resistance, overheating, short circuit, overcharge/overdischarge

More information you can see https://vapesourcing.com/vapecige-nano-kit.html

Vapesourcing · September 10, 2019, 3:29am

G-taste Mimo Pod Kit - Perfect Balance of Flavor and Cloud

G-taste MIMO Pod System adopts ergonomically designed mouthpiece that is best fits your mouth to provide a more comfortable vaping experience. Made of food grade PCTG materials and anti-bacterial copper, it can be used with confidence. MIMO weighs only 24 grams and is powered by a 450mAh battery, which can be simply charged by the bottom micro USB.

It ships with two 1.8ohm pods that fits 1.3ml of visible e-liquid to perfectly balance the flavor and cloud. BTS - Bottom to Side RDA Style Airflow Structure creates an outstanding flavor and vapor production while maintaining its leak-proof condition. With only one button for all operations, you can power on/off the battery or enjoy vaping by pressing the power button without the risk of automatically working.

Parameters:
Material: Plastic + Stainless Steel
Pod Capacity: 1.3ml
Size: 14.5 * 90.4mm
Battery Capacity: 450mAh
Coil Resistance: 1.8ohm
Input Voltage: 3.3V - 3.7V
Charging: Micro USB 5V/500 ± 50mA

More information you can see https://vapesourcing.com/g-taste-mimo.html

Vapesourcing · September 10, 2019, 5:34am

First Look | 520mAh Uwell Caliburn KOKO Kit

Hey guys. Today we first look at the brand new Uwell Caliburn KOKO Kit. From its name, we can see that it is inextricably linked to the previous Caliburn. So may also like it if you like or have used the Caliburn.

Uwell Caliburn KOKO continues the concise style of the Caliburn. Still built with Aluminium Alloy, it is lightweight enough to carry anywhere yet very durable for long term use. Powered by a built-in 520mAh, the Caliburn KOKO can last a moderate vaping time, avoiding the troubles of frequent charging and satisfy the requirements of continuous work. The battery is charged via the USB port on the bottom of the device and the little LED indicator light on the side will show the battery life clearly.

This time, Uwell equipped the Caliburn KOKO with the same pod used in the Caliburn Kit. It can hold up to 2ml of e-juice and features an easy top filling port. The coil inside the pod has a resistance of 1.4 ohms and the parallel coil design can fully atomize the e-liquid which will bring you better flavor, bigger clouds, and a smoother throat hit. All in all, the Caliburn KOKO is worth a shot!

Where to buy: https://vapesourcing.com/uwell-caliburn-koko-kit.html

Parameters
Size: coming soon
Battery Capacity: 520mAh
Juice Capacity: 2ml
Material: Aluminum Alloy, PR, PCTG
Compatible: Caliburn Pod

You may also like: voopoo drag nano cena

Vapesourcing · September 10, 2019, 6:43am

What Are The Advantages Of Snowwolf Afeng30 Kit?

Guys, good day! This time we’ll be covering the Snowwolf AFeng30 Kit. If you are looking for a pod mod vape with a replaceable battery, then it may be exactly what you want. Ok, here we go!

Snowwolf AFeng30 is the updated version of the AFeng30 Kit. Powered by a single 18650 battery, it can fire up to 30W and features three working modes. Pressing the power button 3 times to adjust the wattage, customize your clouds and nicotine hit to meet your daily needs. Afeng30 also supports 2A fast charging that can speed up charging time. Moreover, it is installed the smart chip inside, which makes the coils, airflow, and e-juice have a better combination to showcase the smoother vaping experience that will give you a perfect taste.

As for the Pod, 2ml and 3ml capacity can be selected. There appears to be only one coil option available at present a 0.6ohm mesh with organic cotton wicking. This is also compatible with the Snowwolf Wocket Kit. On the base of the coil is an airflow ring which you can use to adjust the airflow to your preference. All in all, the AFeng30 is worth every penny.

Where to buy: https://vapesourcing.com/snowwolf-afeng30-kit.html

Parameters
Mod
Size: 44.0mm(W) * 78.5mm(H) * 22.5mm(D)
Battery: Single 18650 battery
Wattage Levels: 18W/Red, 24W/Blue, 30W/green
Resistance Range: 0.30ohm-1.5ohm
Charging In terface: Type C
Charging Current: 5V/2A

Pod
Capacity: 3ml
Material: PCTG + Resin(Battery cover)
Vaping Style: DTL
Airflow Style: Bottom Air In
Airflow Adjustment Style: Bottom
Pre-installed Coil: Wicked coil (0.6ohm)
Extra Coil: Wicked coil (0.6ohm)
PG/VG Suggested: All

You may also like: VOOPOO VINCI R Price

Vapesourcing · September 11, 2019, 3:42am

OBS Alter Pod Kit - Meet The Pleasure of MTL and DTL Vaping

As an all-in-one device, OBS Alter Pod Kit with magnetic connection for easy installation, and 2.5D toughened glass on the side panels for comfortable grip and durability. Powered by a built-in 2500mAh battery, it can be charged via the Type-C port with 1.6A current. On the side, there is an OLED display screen for showing the detailed vaping data clearly. On the other side, there is a small liquid window to let you know the current level. The max output is 70 watts, you can use the up and down button to adjust the working wattage and press the round fire button to enjoy the vaping.

To meet the demands of both MTL (mouth to lung) and DTL (direct to lung) vapers, the kit is designed with two different airflow bases for the various coils - the sub-ohm base that is compatible with 0.2ohm M1 coil and 0.15ohm M3 coil, and the nic salt base that is compatible with 1.4ohm NX coil and 0.15ohm SX coil. The nic salt base comes with dual airflow adjustable slots to let you adjust the air by rotating the base. Utilizing the convenient top e-juice refill design, you can just press the triangle button to slide out and reveal the large filling hole, without leaking worry.

Parameters:
Dimensions: 85 × 43 × 24mm
Case Material: Zinc alloy + plastic
Battery: 2500mAh internal
Cartridge Capacity: 2/3.5/5ml
Evaporator Resistance: 0.15/0.2/1.4Ω
Output Power Range: 5 - 70W
Working Voltage: 3.3 - 4.2V
Resistance Range: 0.15 - 3.0Ω
Coils: M1 (0.2ohm, 50 - 70W), M3 (0.15ohm, 50 - 70W), NX (1.4ohm, 8 - 12W), SX (0.15ohm, 20 - 25W)
Operating Mode: Power
Protection: Low/high resistance, overheating, short circuit, overcharging/overdischarge
Connector Type: Magnetic
Charging: Type C USB port, 1.6A charging current

More information you can see https://vapesourcing.com/obs-alter-kit.html

Vapesourcing · September 11, 2019, 8:52am

First Look | Oumier Wasp Nano MTL RTA

Guys, good day. Still remember the Wasp Nano RTA and the Wasp Nano RDTA by Oumier? This time we’ll be covering the Oumier Wasp Nano MTL RTA—the new MTL version of these successful Wasp Nano atomizers.

Oumier Wasp Nano MTL RTA is created to cater for those vapers who prefer higher resistance coils, more airflow restriction, and higher nicotine / nicotine salt e-liquid. Measuring 22mm in base diameter, this RTA can hold up to 1.2ml of e-juice with a straight glass tube and 2ml with a bubble glass tube. On the base of the RTA is the adjustable airflow ring to give you plenty of airflow options to suit your preference.

The airflow enters the tank through the base inlets and then travels to the coil on the deck. Talking of the deck, it is wide enough for easy single coil building with two posts. At last, there is an easy top refilling cap. Just rotate the top cap 90 degrees anticlockwise to reveal the filling port, and then you can refill the e-juice effortlessly.

Where to buy: https://vapesourcing.com/oumier-wasp-nano-mtl-rta.html

Parameters as below
Size: 22mm * 40.9mm
Capacity: 2ml
Coil: Single Coil
Drip Tip: 510
Fill: Top-refilling
Color: Gold, Black, SS

You may also like: desire cut squonk near me

Vapesourcing · September 11, 2019, 9:00am

AAAVape Anulax Sub Ohm Tank with Three Coil Options

AAAVape Anulax Sub Ohm Tank is designed to appeal to most any vaper with features such as hinged top fill system, dual slotted bottom airflow control ring, and has access to AAACigs Anulax coil family. It has a diameter of 24mm and 28mm at widest point, easily fits many different vape mods.

Opened by the press of a button, the Anulax Sub Ohm Tank possesses a hinged top fill system that reveals two fill ports on either side to reduce the positive pressure within while refilling top fruit e-liquid. In addition, the slightly knurled airflow control ring at the base features dual slots for easy manipulation to adjust the proper amount of airflow reaching the coil.

From gusty draws to a more restricted airflow pull, the Anulax can use proprietary coils from AAA Vapor to further tailor the vaping experience to your preference. As a cloudy sub ohm tank, Anulax has plenty of coil options to choose from - a 0.15ohm mesh coil, a 0.2ohm triple coil, and a 0.2ohm flat coil, to create ideal vape that suits any preference.

Parameters:
Diameter: 24mm (base)/28mm (bubble glass tube)
Length (including mouthpiece): 52.6mm
Net Weight: 54g
E-liquid Capacity: 5ml (bubble glass tube)/3ml (straight glass tube)
Thread: 510
Drip Tip: 810 Delrin
Material: 304 stainless steel + quartz glass reinforcement
Resistance & Suggested Coil Wattage: 0.15ohm AMC mesh coil (50 - 60W), 0.4ohm AFC triple coil (55 - 65W)

More information you can see https://vapesourcing.com/aaavape-anulax-tank.html

Vapesourcing · September 12, 2019, 3:32am

Aspire K Lite Mod - As Powerful As You Expect

Although coming initially as a kit with the Aspire K Lite Tank, Aspire K Lite Box Mod can match with most 510 threaded tanks. Constructed from zinc-alloy material, the chassis of the Aspire K Lite is lightweight and impact-resistant, guarding the internal 900mAh rechargeable battery, which can be charged via the Micro USB charging port located at the bottom of the device. While charging, the LED will illuminate to indicate the state of charge.

It features 5 voltage outputs to help you find the perfect output level to match the attached atomizer or tank. You can adjust the voltage from 3.0V to 5.0V simply by pressing the mode button. Situated in the middle of the exterior chassis, the K Lite possesses a 0.69 inch OLED display screen to show you the crucial vaping data. Finally, this mod comes with multiple safety features to make you use with confidence, such as overheating protection, overcharging protection, low voltage protection, short circuit protection, and automatic cutoff.

Parameters:
Size：75mm * 26.5mm * 17mm
Battery Type: Built-in LiPo
Battery Capacity: 900mAh
Port: Micro USB
Power Options: 3.0V, 3.5V, 4.0V, 4.5V, 5.0V
Resistance Range: 0.8ohm - 3.0ohm
Thread: Threaded 510 connection
Material: Zinc-alloy chassis construction

More information you can see https://vapesourcing.com/aspire-k-lite-mod.html

Vapesourcing · September 12, 2019, 5:09am

First Look | GeekVape Aegis Squonker Kit 100W

Hey guys. Do you still remember or have you ever used the squonk kits by Geekvape? Today, let’s first look at the Geekvape Aegis Squonker Kit—the latest squonk device by Geekvape, also the latest device of Aegis series to date. Ok, here we go!

Geekvape Aegis Squonker Kit comprises of the Aegis Squonker Mod and the TENGU RDA. From the Aegis name, we can infer that the mod is waterproof, dustproof, and shockproof. Powered by a single 18650 battery, it is constructed with the AS-100 chipset to produce stable and sound operation with up to 100W of output. Modes are wide-ranging and include curve mode, power mode, temperature control mode, TCR mode. The control face of the mod is built with a single power button and two adjustment buttons.

In the middle, there’s a monochrome screen that shows vape data vertically. Indicators include current mode, power/temperature, a battery bar for the single cell that powers the setup, coil resistance, current amperage, current voltage, and puff counts. At the back of the mod, there’s an interchangeable pump that directs juice to the atomizer when pressed. This section can be swapped out for a non-squonk piece if preferred. Removal of the pump section permits accessing the silicone juice bottle which can be effortlessly removed for filling. As for TENGU RDA, it has been on the market for a long time, so we won’t cover it in detail here.

Where to buy: https://vapesourcing.com/geekvape-aegis-squonker-kit.html

Parameters
Aegis Squonker Mod
Material: Zinc-Aluminium Alloy Chassis Construction + Rubberized Exterior Edge
Size: 86.4mm * 41.2mm * 31.5mm
Battery: Single High-Amp 18650 Battery (Not Included)
Wattage Output Range: 5-100W
Resistance Range: 0.05ohm-3.0ohm
Modes: Power/TC(Ni,Ti,SS)/TCR/VPC/BYPASS
Temperature Range: 100°-315°C / 200°-600°F
Colors: Green, Blue, Orange, Red, Gunmetal, Black

TENGU RDA
Material: Superior Stainless Steel Construction
Diameter：24mm
Coil Configuration: Single or Dual Coil
Airflow: Side to Coil Airflow