Voltrove 25v3 RTA Reviewed by SessionDrummer

While I was finishing this review, Coil Clout now has a 20% OFF on their site, except for coils, and I am adding a SECOND Voltrove 25v3 to my cart along with some Alien Wire Sticks, and getting FREE shipping, AND 20% OFF on everything !!! Code: ALLBUTCOILS20

4 Likes

You make it very hard for a person to not want one. Thanks

5 Likes

Thank you @Fordf150_Angelo. I’m ordering a 2nd one, so you won’t have to. :slight_smile:

1 Like

I’ll second what @Fordf150_Angelo said. I think the only way I’m NOT going to spend money is to just avoid your reviews. :grin:
I was just watching Mike Vapes review of this on YouTube and he gave it an 8/10 for flavor. Nice review and very good photography brother. :metal:

4 Likes

Well @TorturedZen I am not my brother’s keeper, BUT, I think you’ll be better off FOR reading my reviews LOL …

I watched, and/or read NO REVIEWS of this before I completed mine, for fear of “tainting”. I’m surprised Mike only gave it an 8/10. I REALLY don’t like to number rate equipment, and about 99.9% of the time, I reserve that for flavors (or one-shots, juices, mixes). BUT, if I HAD to, had to give it a FLAVOR NUMBER, I would have to give it NO LESS than a 9.99/10. YES, IMHO, the flavor out of it, was THAT good.

The MOST interesting thing for me, was that I have tested a LOT of single/dual coil setups, and almost ALL of the time, the single coils left me wanting, and/or when moving up to dual coils, the flavor DRAMATICALLY increased. With the Voltrove 25 v.3 however, the flavor I got from the single 3.0mm coil, sitting LOW in the deck, gave me SUCH good flavor, I was honestly afraid to take it out, to setup the dual coils. I just didn’t want to change it, or jinx it. Now granted the dual coils DID provide more flavor, just not that much MORE flavor. THAT was the interesting thing.

Mark, nor Joe supplied this RTA for the review, nor the juices. All purchased by me, so no #TeamFreeShit here on this review. AND, I put my money where my mouth is, hehe, so I hope the review at least HELPED better showcase, how it worked for me.

I can’t help myself @TorturedZen, I gotta get another.

6 Likes

@TorturedZen you had asked about the commercial juice(s) previously …

I used to buy from Joe years ago, and I can’t remember why, maybe a search for the Voltrove 25 v.3, but I stumbled back on Royal Vapes, and I remembered liking his juices, and the fact that he never added sweeteners to them. Low and behold HE had the V 25 v.3 in stock, and I decided to give him some of my business again, despite him being in the UK, and the shipping and all that entailed.

I knew that accurately reproducing Loops, Custards, Donuts, Raspberries, Ice Cream, and Wafers would be a GREAT TEST. Indeed it was, and the V25 just laughed, and asked for more.

4 Likes

I don’t put too much weight in most of the YT reviewers, Mike Vapes included. He has toned down his enthusiasm, unlike a few years ago; or maybe he was just having an off day but he seemed to be just going through the motions.

7 Likes

Can you please explain why you prefer a tinted glass over a clear one?

Why do tinted glass not peel but clear or non tinted ones do?

This is a beautiful set up and thank you for your eloquent reviews!

1 Like

The tinted, mirrored finish adds to the slick, monolithic appearance of it, as does the minimal branding.

I don’t think it was that the non-tinted DID peel, but stating that the tinted ones do not, due to a much higher standard finish, as opposed to a cheaper one.

Well thank you very much @KC111.

2 Likes

If I could wick myself, your review on the Voltroves would make me buy 2 today!

2 Likes

I would think the tinted ones would make it harder to see your juice level? That was why I wondered why you prefer the tint over the non tint.

2 Likes

I’m trying to figure out HOW we can get you ON one @KC111. Surely I could wick one up and send it to you, but THEN, what would we do when re-wicking came up ?

2 Likes

Exactly! Why bother unless you produce many SD clones. I wouldn’t bother and I wouldn’t spend $75+ for a one time job.

2 Likes

Well, the COOL thing is/was that the only thing partially obscured was the juice flow port, BUT, really only on the bubble glass. The juice level could still be seen.

The mirrored tint added to the “clean” look of it.

3 Likes

Was just re-reviewing your pictures of the clear glass side by side with the tinted Voltrove.

2 Likes

I’ve been hopeing you forgot to review this untill they sold out I wanted the 30 mm but luckily they sold out and I kept my money ,I wanted a single coil rta looks like I’m spending my money cheers for your time and money spent Now please stop I’m trying to save my money to live.did I mention money to much :+1:

5 Likes

Just ordered black one 72$ with discoumt…Very weird though i couldnt find coils only wire. So after i ordered i logged back in and there were the coils…I have enough coils from N Devine , INOCR , Apathy Miller but i wanted so more coilclout :person_shrugging::person_shrugging::person_shrugging:

I had to get this simce @marsh8 says it is a lot better than the OG Arbiter which is hard to believe. They look very similar , Build deck and the domed chimney insert thing .

6 Likes

Did you choose the Route Package Protection for $1.55 or did you unselect that?

3 Likes

I didnt unselect anything and always have thought that was part of the new pmta crap

So i guess i have it lol

4 Likes

I thought it was shipping insurance. It was automatically applied for me. I don’t even know why I have that page open, LOL. I can’t buy it.

4 Likes