I would like to see Limelight make a ( Wood ) Dripbox 160 with a Hohmtech FSK 171 chip/board in it, 2 18650 batteries with a spring loaded 510 With Sexy Curves 
3 Likes
I just talked to the owner of Premium Vials he said he was going to try to get us some of the Cappy 4 and the super soft Squonk bottles
1 Like
God , i love that one @__@’’’
its so hard find a stab wood like that !
1 Like
Okay, I am going to ask something silly. What is stab wood?
2 Likes
I’ve never ordered from this vendor before but they just posted this if anyone is interested. They have a buy one get one free on the Dripbox 160.
Keep updating! Urvapin Super Original Vape Deals--Giveaway, Coupon Code, Promotion, Review?
2 Likes
so I don’t belong to any “squonking” groups or communities nor know many people who have them either. I figured this would be a good place to ask since I ran across the thread. But does anyone own an MTO DNA 75 squonk mod? I’ve been having a really concerning issue with heat with mine, and wanted to know if anyone else has run into this issue.
1 Like
Welcome Wayne I don’t have that Mod but maybe someone who does can help you sort it out 
1 Like
I do not own one and after doing a google search for it I was only able to find a site out of Italy that even mentions the DNA75 version. Plenty of reference to DNA 40’s
Because of it having the DNA 75 board and plenty of folks here are familiar with that board maybe a good description of the Heat issue you are having would lead to some help.
1 Like
Can someone help me out here, I have had conflicting answers, will the sxk hadaly clone make contact with the center pin on the dripbox 160?
I’ve had one person tell me it doesn’t and one person tell me it does…
1 Like
Please look at post 419 and 444 … I would not get the SXK because the clamps are to small and you can not fit your bigger coils under them
1 Like
And Welcome to The Squonk Gang 
2 Likes
Thank you for the welcome, I looked at those posts…
I was mistaken, the one I was looking at was the shenray,…
So, after looking at that post, If I am looking at the right one, I am seeing that it fits on the hohm wrecker, but I was wondering will it fit on the dripbox 160 or is the 510 too short?
Sorry if I am being dense here…
2 Likes
Yes I use it on the DB 160 all the time
thank you for your help, going to go and browse the forum, been thinking about getting into juice diy mixing anyway, looks like I have found a new source of information…
2 Likes
Yes ELR is the Best place to be , good luck and just ask if you have any questions
2 Likes
Sorry to piggy back off your thread, but could you guys recommend what type of stainless steel wire to get for temp control, and how many wraps, spaced or not spaced. And any other information for getting into the world of TC. I’m using a dripbox 160 and currently use dual macro coils, 24 guage, and it reads at .24 ohms. I like this vape, but I would like a bit more flavor, but I am currently using the stock atty, but I have a hadaly clone on the way so I am hoping that will fix the flavor, but I am clueless on how to build a tc single coil deck. Can any of you offer up any builds that would work, and what do I need to set my temperature at to start with, and what would be too high?
I like this wire ( look at the reviews ) 26g , 3mm ID , 7 wrap spaced coil .55 ohm for single coil
.27 ohm for dual coils
http://www.kidneypuncher.com/ss316l-wire-100ft-spool/
Also check this out
http://forum.e-liquid-recipes.com/t/mesh-as-coil-not-as-wick/70071?u=rob62
1 Like
Really liking the Split Atty on my Squeeze. Great flavor and no more dry hits! A couple squonks fill the tank and you can just vape away. Probably gonna order more of these. Great for non TC squonkers.
2 Likes
Sorry to reply to a very old post, but I saw your post about difficulty making coils…
I have essential tremors, which is basically like a non threatening disease that makes my hands shake almost like I have parkinsons…
I saw a video from super x drifter using the "artistic wire coiling gizmo"
This is the only method I have ever used to make even half decent coils… Just thought I would recommend it since it enabled me to build pretty tight coils…
4 Likes